Hello,
I have flashed twrp over Odin and it works well, flashed custom room too, everything was super fine but after i restart the phone
Got stuck in twrp logo
Can't go to download mode or boot to system either.
Tried to hard restart power + vol - then after restart press power vol - bixby but same issue.
Download mode won't launch neither recovery.
Picture of the problem in the attachment
Please any solution?
first you flashed the wrong version of twrp according to your attachment, in my opinion you have to reflash everything and you can follow this tutorial and I hope it helps you
diznote4 said:
first you flashed the wrong version of twrp according to your attachment, in my opinion you have to reflash everything and you can follow this tutorial and I hope it helps you
Click to expand...
Click to collapse
Sorry but i don't think it'll boot first time or even i could flash custom rom from it if the recovery wasn't compatible.
After the twrp everything was fine, and i got access to twrp recovery and flash custom room without any problems.
First bot was fine, but after 2 consecutive restarts
This issue occurred .
And can't make it to download mode now, so I can't flash stock or anything.
I mean the correct version to flash android 13 it is twrp v 3 7 0 9 0 if not the phone hangs at twrp logo.
now to put back on download mode you have to do this manipulation
1/ connect your phone to your pc with the USB cable then press bixbi and power (between 5 and 7 seconds) and when the phone goes black at this moment don't let go of bixbi and power you have to press the volume button -
I hope it will go.
Related
I Have a similar problem as posted by someone else - but I can't reply in that thread yet so here it is:
Also SGS GT-I9000 - now stuck on white logo screen.
What I have done:
- phone was slow and very laggy so I wanted to install new ROM
- found out that 3bc didn't work so tried to fix that using a guide from SamsungGalaxySforums based on one from XDA (tried to post the link, but forum rules won't let me).
- now download mode works but recovery mode still doesn't.
- when rebooting without being attached to laptop it showed funny coloured lines first
- I tried this whole thing again and now my phone is stuck on white logo screen. Still able to get into download mode and flash, but no booting phone.
Any ideas? Should I flash a different bootloader?
EDIT: I had tried the Aries_P-SBL.tar.md5 bootloader and only got coloured lines.
Now using the EZboot-GingerBread-1.0.tar.md5 bootloader and getting a bootloader screen. Now making a backup of all my data first.
EDIT: After backup still hangs at white Galaxy S screen - so still no working phone! Ideas?
Turn off your phone and reboot into the recovery mode by pressing Volume UP+ Home + Power.
Then when in the recovery, select Wipe Data and Cache. Reboot when done. You should be up and running. Also, first boot may take a while so be patient.
dhiru1602 said:
Turn off your phone and reboot into the recovery mode by pressing Volume UP+ Home + Power.
Then when in the recovery, select Wipe Data and Cache. Reboot when done. You should be up and running. Also, first boot may take a while so be patient.
Click to expand...
Click to collapse
It says in his post, recovery wont work, only download.
Sounds to me he has screwed up the bootloader.
Now you've done this http://forum.xda-developers.com/showthread.php?t=1089989
I now suggest you boot to download and flash a stock rom using ODIN.
just flash stock Rom using Odin and than you can flash what you want
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
i was planning on flashing a custom rom on my galaxy s6 today but at work i watched a video on how to get twrp recovery, so i downloaded it on to my phone, followed every direction and step using flashify then when i installed twrp and rebooted my phone it got stuck at the boot load screen, i cant even go to recovery mode nor download mode, everytime i hold the power button and volume rockers it just cuts off and boots back to boot loop cuts off boot loop and so on, idk what to do can someone please help
Slow down, take your time. This is not a permi-brick. Just go back, start at step 1, and try again. There is hope. There must be a way to get into recovery.
I'm having the same exact issue, I'm able to get into download mode by holding volume up, home and power buttons. I'm downloading the stock firmware now and I'm going to try to flash it with odin to see if it works.
TokyoLeee said:
i was planning on flashing a custom rom on my galaxy s6 today but at work i watched a video on how to get twrp recovery, so i downloaded it on to my phone, followed every direction and step using flashify then when i installed twrp and rebooted my phone it got stuck at the boot load screen, i cant even go to recovery mode nor download mode, everytime i hold the power button and volume rockers it just cuts off and boots back to boot loop cuts off boot loop and so on, idk what to do can someone please help
Click to expand...
Click to collapse
jewjetski said:
I'm having the same exact issue, I'm able to get into download mode by holding volume up, home and power buttons. I'm downloading the stock firmware now and I'm going to try to flash it with odin to see if it works.
Click to expand...
Click to collapse
If you two can't get into download mode for whatever reason get odin to the point it says waiting for phone or connection or whatever it says then let it boot loop a couple times with the phone plugged in (preferably start from a powered off state). This might just have been lg but for some reason I remember odin rebooting my phone into download mode if the program was at that point.
*edit*
I feel like I wasn't clear enough. You want the tar ball loaded and hit start before you plug the phone in. I could be way off but it's worth a try.
Hi, I was flashing the Empora ROM this evening and followed the instructions exactly.
My Phone will not power on and when I try to into recovery I get this instead.
Warning!!
"A custom OS can cause critical problems in phone and installed applications.
If you want to download a custom OS, press the volume up key.
Otherwise press volume down to cancel.''
When I press up it puts me in download mode and down I get stuck in a black screen.
Not sure what I did wrong but any help would be greatly appreciated to get back into TWRP and at least restore my back up.
Thank you
Do you have the latest bootloader and modem? If not, Odin the latest oem ROM first.
1. Pull the battery out for 30 sec.
2. Put battery back in, power up in Download mode
3. Odin the correct TWRP to the phone
4. boot to TWRP, flash Empora ROM.
5. Reboot and wait 15 mins, enjoy.
hi all. i just install the Beta of ONEUI 2 and android 10 on my S10e, (using the update.zip with adb in recevery) and now my S10e is "bootlooping" with no acces to recovery and download mode... impossible for me at the moment to reflash a clean ROM with odin... can you help? or my phone is definitivly DEAD??? :/ thx you all...
Maybe you tell the situation in the correct thread, where you load the firmware?
There more dudes, who flashed the rom and known the bug (soft brick?).
I use the official beta of the android 10 firmware & can't directly support.
Good luck.
blazethelight said:
Maybe you tell the situation in the correct thread, where you load the firmware?
There more dudes, who flashed the rom and known the bug (soft brick?).
I use the official beta of the android 10 firmware & can't directly support.
Good luck.
Click to expand...
Click to collapse
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..
Nyzoka said:
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..
Click to expand...
Click to collapse
To enter download mode, put usb cable into your phone, press and hold vol down button without bixby button, make sure your screen comes to black(total shut down if its on bootloop), then put the usb cable into your pc. It should detect your phone
Nyzoka said:
hi all. i just install the Beta of ONEUI 2 and android 10 on my S10e, (using the update.zip with adb in recevery) and now my S10e is "bootlooping" with no acces to recovery and download mode... impossible for me at the moment to reflash a clean ROM with odin... can you help? or my phone is definitivly DEAD??? :/ thx you all...
Click to expand...
Click to collapse
Hi,the only thing you can do is reflash with odin.
It is because you had unlocked bootloader.
When you have unlocked bl and flash Q it will bootloop.
yesterday I had the same problem (update beta Q with BL unlock). I couldn't open either downloading mod or recovery. Bootloop. I left the phone "resting" overnight and tried again in the morning. Hold Volume- and Bixby together and then connect the PC cable. download mod opened(possibly a coincidence). Odin worked.
Odesláno z mého SM-G970F pomocí Tapatalk
thx you all
Nyzoka said:
hi, i load the Firmware from this link
https://forum.xda-developers.com/s10-plus/how-to/galaxy-s10-sm-g975f-official-oneui2-10-t3980879
yes it's a soft brick, the phone boot to the Samsung logo, with the little vibration, and reboot again and again. recovery and download buttons manipulations not work..
Click to expand...
Click to collapse
try letting the phone die then when bootloop stops inset cable and do the download mode combo, failing that when the device is looping does it connect sucsessfully to your computer because i had a similar experiance, at the samsung logo screen although display was looping adb commands did acually work, i then entered adb reboot download in cmd prompt and the download screen appeard and was odin compatible for a complete reflash of the firmware with magisk patched AP file
i hope this helps !! best of luck my friend
Are you fixed?
Nyzoka said:
thx you all
Click to expand...
Click to collapse
hello are you fixed? I have the same problem
marcelito29 said:
hello are you fixed? I have the same problem
Click to expand...
Click to collapse
there 3 of us
i have same problem, can not enter to any mode
marcelito29 said:
hello are you fixed? I have the same problem
Click to expand...
Click to collapse
Hello,
I've the same problem. To fix it :
- Go to recovery mode (when your phone is shutdown, press Bixby+Vol Up + Power and realase all after Samsung's Logo)
- Wipe Cache
- Wipe System
- Reboot System
I have the same problem on my Samsung Galaxy A7 2018. It keeps showing every 5 seconds the logo in an infinite bootloop and i cannot enter recovery or download mode. Any help?
Tantalord said:
I have the same problem on my Samsung Galaxy A7 2018. It keeps showing every 5 seconds the logo in an infinite bootloop and i cannot enter recovery or download mode. Any help?
Click to expand...
Click to collapse
sorry, i don't know if it's been fixed but if have read the thread you will noticed that there isn't a quick fix until you wait till the device goes off, then either your boot into recovery mode (wipe, cache, reset and reboot) or download mode (flash stock rom with odin).
xdagee said:
sorry, i don't know if it's been fixed but if have read the thread you will noticed that there isn't a quick fix until you wait till the device goes off, then either your boot into recovery mode (wipe, cache, reset and reboot) or download mode (flash stock rom with odin).
Click to expand...
Click to collapse
This is why I have hate not being take the battery out of a device. Atleast the S10 doesn't seem likes it's too hard, if it were me I probably just remove the back cover and pop the battery out rather than wait for the battery to die. The back cover seems to just snap off and on, almost like they could have just made it removable in the first place, but then of course too many people would just buy new batteries when they wear out rather than a new phone. Gotta love planned obsolescence.