Database Develop

ODIN won't recognize T810 S2 while in Odin Mode

I need some assistance -
Odin picks up the tablet when it's normal - hooked up to the computer via its original USB, but as soon as I put it in Download Mode (turn it off, hold the keys, and follow the prompts) it goes away. I see the "removed!" message in Odin once that happens, too. Samsung drivers were installed, Developer Mode has been enabled, and USB Adb has been turned on...
Is there anything I can do? Did I miss something?

it sounds like the tab s2 is connected all the time. you have to be in download mode before connecting to the pc. here are the steps from the rooting guide:
- Power off your Galaxy Tab S2. Wait 6-7 seconds after screen goes off.
- Press and hold the three buttons Power + Home + Volume down together until you see warning screen.
- Press Volume Up to continue to download mode.
- Open Odin
- Connect your Galaxy Tab S2 to PC now using USB cable. Odin should recognize your Galaxy Tab S2. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue.

Thank you for the prompt response - I tried connecting it to my PC only while Odin was active. I even tried restarting Windows without the tablet connected and tried again, connecting it to the pc, only when "download mode" was present on-screen. Windows still doesn't recognize it. I'll keep trying.

DOWNLOAD mode or RECOVERY mode?
They are not the same thing.

ashyx said:
DOWNLOAD mode or RECOVERY mode?
They are not the same thing.
Click to expand...
Click to collapse
...no one's mentioned recovery mode... Download Mode only.
Thanks for your work, btw!

I also had problems with ODIN using the original Samsung usb-cable in download mode. (SM-T810)
Problem was solved when using another, non-stock, usb-cable. Maybe you can try with that?

neoage said:
...no one's mentioned recovery mode... Download Mode only.
Thanks for your work, btw!
Click to expand...
Click to collapse
No they didn't but many make the mistake of thinking they are the same thing.
Install the Samsung USB drivers while in download mode. Make sure device manager picks up your device when plugging usb in.

ashyx said:
No they didn't but many make the mistake of thinking they are the same thing.
Install the Samsung USB drivers while in download mode. Make sure device manager picks up your device when plugging usb in.
Click to expand...
Click to collapse
I did that and it worked. There was, however, an error: Something about "image 2 binary 1", and I got the cyan error screen prompting me to use samsung smart safe. Needless to say, that didn't work, so I re-flashed the twrp recovery tar with Odin and now I'm here.
After checking out root access with many different apps, it seems that I'm properly rooted...SEEMS that way. I'll try to access recovery and let you known if it went through. Main reason is because I received an error during the flashing portion of the install - I was installing a Deodexed rom image when the aforementioned event happened. I'm gonna try again, since now, I'm 100% sure I know what happened.

. .

Recovery Works. Thank you guys for the help!

Add to theme
I got vey strange error this mrning on t715:
False enter to download mode: some characters without sense on bottom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and upper: invalid emmc and something about force flash. But damaged characters. Only I can do was reenter download with vol minus home power.it than got healthy download mode but i just reset phone and it foes in twz normally

Full brick of ZUK Z2 PRO

Hi guys, so sorry for my bad english but i try t explain my problem. One week ago my device is blocked with a led blue and black screen and it dont go in noone mode but only in (i think is that) EDL MODE. I just changr driver of device by pc to work from 900E in HS-USB Qloader 9008. Qfil see device with that driver but dont flash nothing with error ''SAHARA FAIL''. I put one image to allow see you the error. i try all way also with miflash that give me the ''sahara rear end error with status 9 miflash''.
I hope that you help me because i have a lot of documents and image of my work on device. Thx very much.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Edl mode specific in one thing. You can start flashing only a few seconds after going into edl. After that qfil will still show phone in edl but flash will fail.

Oriwen said:
Edl mode specific in one thing. You can start flashing only a few seconds after going into edl. After that qfil will still show phone in edl but flash will fail.
Click to expand...
Click to collapse
Yeah this i know, i start download as soon as i connect smartphone to pc. dont work

Restart to edl, connect and flash in shortest possible interval, have everything set-up in qfil in advance. Only connecting to pc is not enough.

mode edl with modified usb
Oriwen said:
Restart to edl, connect and flash in shortest possible interval, have everything set-up in qfil in advance. Only connecting to pc is not enough.
Click to expand...
Click to collapse
Hi, a few days ago i modified a normal cable usb to create rhe cable for edl and work go be fine. now i try flash but there is another error by miflash. in internet dont exit this error so now i dont know what i can i do. thx for answer.

today i had the same issue, qcomm hs-usb 900E,i want to go to the 9008 qlaoder, i don't want to do the driver change, i saw many bad comments about that, i want to try the deepflash cable, i saw some youtube videos about that, can someone tell me if it works on zuk z2 pro, cuz, i saw only threats about zuk z2

i succeeded in puting the phone on qloader mode, but now, i'm have the same issue as you, the device doesn't want to flash the 1.9 rom, even with putting the files in c: path, i don't know what to do :/

[OP7PRO][LATEST OOS 9.5.10 GM31CB] Newest version of T-Mobile MSM tool

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
This MSM tool is only meant for T-Mobile version of OnePlus 7 Pro.
The previous MSM tool shared by @slayerh4x in his thread restore to OOS 9.5.5 while the one I will share in this thread will restore your device to OOS 9.5.9/9.5.10 .
You can download 9.5.9 tool here and 9.5.10 tool here.
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device

FAQ:
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsoft...f-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
My device doesn't stay in EDL mode for more than 10 seconds
Some units can have this problem and there isn't a lot of things to do to fix that, except being fast after plugging your phone to your computer.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked in first part of this FAQ.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.

Reserved

Credits:
@Titokhan for inspiration in writing
@headsh0t95 for suggesting me to request an access to upload files on AndroidFileHost a few months ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS

Added 9.5.10 GM31CB unbrick tool

I used the 9.5.5 MDM tool and it worked fine. Then I got the OTAs for the updates from T-Mobile almost immediately. I believe it was 2 of them.
Thanks for putting this out there! I'll swap it out with the other tool.

Mine just stays asaram pre-processing, and it shows the right device in device mgr. I am on9.5.10 but wanted to go to the international version too. Oh well... Is there a way to check that the phone is in EDL mode?

T-Mobile variant, get stuck at Param preload. Device Manager shows Qualcomm HS-USB QDLoader 9008. See screenshot below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, am I missing something or is there no download for the driver OP linked in FAQ?

bobbarker2 said:
T-Mobile variant, get stuck at Param preload. Device Manager shows Qualcomm HS-USB QDLoader 9008. See screenshot below.
Also, am I missing something or is there no download for the driver OP linked in FAQ?
Click to expand...
Click to collapse
Fixed download link in FAQ (source https://www.catalog.update.microsoft.com/Search.aspx?q=Qualcomm Incorporated - Ports - )
Try removing any previous Qualcomm drivers and use the one I linked

CountryEd said:
Mine just stays asaram pre-processing, and it shows the right device in device mgr. I am on9.5.10 but wanted to go to the international version too. Oh well... Is there a way to check that the phone is in EDL mode?
Click to expand...
Click to collapse
Same as above, try using the Qualcomm drivers I linked in FAQ.
The way to check your device is in EDL mode is by looking at COM ports section in your device manager and search for "QDLOADER 9008" or "QHUSB_BULK" mentions.

Should we be able to extract a boot.img from this? Would love to be able to root the stock firmware.
Sent from my GM1915 using Tapatalk

Some_Random_Username said:
Fixed download link in FAQ (source https://www.catalog.update.microsoft.com/Search.aspx?q=Qualcomm Incorporated - Ports - )
Try removing any previous Qualcomm drivers and use the one I linked
Click to expand...
Click to collapse
Which driver? I see multiple drivers that apply to win10

Ok so the download you linked turned my computer from recognizing it QDLoader 9008 to Qualcomm HS-USB Diagnostics 900E. Whats wrong with the L2 Drivers from other threads?

Well thanks for the share I guess. Now I have to figure out how to get rid of the drivers you provided (Uninstall Driver doesn't remove them and cant update manually with L2 Drivers from other threads).

bobbarker2 said:
Ok so the download you linked turned my computer from recognizing it QDLoader 9008 to Qualcomm HS-USB Diagnostics 900E. Whats wrong with the L2 Drivers from other threads?
Click to expand...
Click to collapse
The L2 drivers from other threads can be outdated or not work for some persons, hence why I recommend the one present on Windows Update website (odd they didn't work for you though ...)
bobbarker2 said:
Well thanks for the share I guess. Now I have to figure out how to get rid of the drivers you provided (Uninstall Driver doesn't remove them and cant update manually with L2 Drivers from other threads).
Click to expand...
Click to collapse
Damn, really?
It should normally go away after right clicking on them, selecting Uninstall device and ticking "delete the driver software for this device"

mjdavis871 said:
Should we be able to extract a boot.img from this? Would love to be able to root the stock firmware.
Click to expand...
Click to collapse
I doubt it is possible to extract it from the OPS file itself.
There is however a hidden readback mode which should allow you to extract it from your device running T-Mo software

Some_Random_Username said:
I doubt it is possible to extract it from the OPS file itself.
There is however a hidden readback mode which should allow you to extract it from your device running T-Mo software
Click to expand...
Click to collapse
Where can I find info on that?
Sent from my GM1915 using Tapatalk

mjdavis871 said:
Where can I find info on that?
Sent from my GM1915 using Tapatalk
Click to expand...
Click to collapse
Press F8 while in tool, select the partitions you want to readback, input "oneplus" as password, press "ok" and click on Readback button.
Partitions you selected will be saved to the root of your system drive.
Note also that your device won't reboot automatically to OOS after a readback contrarily to upgrade mode, you will need to use power button to turn it back on.
Source https://forum.xda-developers.com/showpost.php?p=78226654&postcount=88

Some_Random_Username said:
The L2 drivers from other threads can be outdated or not work for some persons, hence why I recommend the one present on Windows Update website (odd they didn't work for you though ...)
Damn, really?
It should normally go away after right clicking on them, selecting Uninstall device and ticking "delete the driver software for this device"
Click to expand...
Click to collapse
I've done this countless times and that didn't work but i figured out a work around. So I got it back the QBLoader device but the driver version is 2.1.2.0. Can't seem to find 2.1.2.2 anywhere.

I'm really thankful you put this together for us, and the FAQ after the OP has some info in it I needed but hadn't seen anywhere else.
On the other hand, I may never get to see your work. I'm looking at a 12 hour download from Android File Host. I hope I don't need to reboot my laptop before tomorrow.

Mi A2 (JASMINE) Not read fastboot or usb debugging or media in pc

Hello everyone my mi a2 not reading pc in device manager too can any help me with this maybe need drivers or more? Thx

robin_vilensky_ said:
Hello everyone my mi a2 not reading pc in device manager too can any help me with this maybe need drivers or more? Thx
Click to expand...
Click to collapse
Just to exclude the easy possibilities:
From your phone's status bar drop-down menu, does it say "charging via usb"? If so, you need to change that to "media transfer" (or something alike).
As for fastboot, this wouldn't actually be nessecary though. Here just make sure you open cmd as an administrator (on Windows, which I assume you're using, since you mention a device manager - on linux you would need to be root).
And, did you activate usb debugging in the developer settings already?
Maybe also do a windows update with your device connected, if still no go.

I have the same problem. I've tried everything without result.

You guys need to give more detailed information, if you want more detailed help..
What ROM are you on?
List everything that is not working.
List your installation procedure.
When did the problem occur for the first time?
What exact steps did you already try?
Which software versions are you using?
For instance using an older fastboot version may result in many problems, but one can only blindly guess with that little concrete info.
If I had such general issues somewhat relating to storage though, I personally would wipe my entire phone in both slots and format data (if you can somehow enter recovery without fastboot ofc, like from a terminal emulator app or via an extended reboot menu present in many custom ROMs).
Oh, and is adb working?

I have Android 9, November.
When I insert the cable into my computer, it starts charging, and an unrecognized usb error appears. There is no mobile option to choose what to do, not even in developer options.
I tried several drivers, not even the MI PC Suit knows cel, is waiting to connect, fastboot also without recognizing. I tried the drivers that have the bootloader unlock topic, unsuccessfully too.
The phone charges normal, and the C to 3jack USB adapter works. I've tried other cables, other computers, and even linux.
I bought the used cell phone, the old owner never plugged it into the computer, so I didn't even know about this mistake.
I've tried system hardreset, unsuccessfully too. I have no recovery installed, and fastboot works.
I see the error in the images, already tried several drivers. There were people who changed the door... sometimes it doesn't even appear, nothing just happens.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Badotti said:
I have Android 9, November.
When I insert the cable into my computer, it starts charging, and an unrecognized usb error appears. There is no mobile option to choose what to do, not even in developer options.
I tried several drivers, not even the MI PC Suit knows cel, is waiting to connect, fastboot also without recognizing. I tried the drivers that have the bootloader unlock topic, unsuccessfully too.
The phone charges normal, and the C to 3jack USB adapter works. I've tried other cables, other computers, and even linux.
I bought the used cell phone, the old owner never plugged it into the computer, so I didn't even know about this mistake.
I've tried system hardreset, unsuccessfully too. I have no recovery installed, and fastboot works.
I see the error in the images, already tried several drivers. There were people who changed the door... sometimes it doesn't even appear, nothing just happens.
Click to expand...
Click to collapse
If you are able to use linux - have you made absolutely sure that fastboot was up to date and did you use it as super user (That is after doing "sudo su")?

Phil_Smith said:
If you are able to use linux - have you made absolutely sure that fastboot was up to date and did you use it as super user (That is after doing "sudo su")?
Click to expand...
Click to collapse
fastboot does not detect the phone, neither on windows nor linux .. not even mi suite does, there are several people with the same problem in mi A2 lite and mi A2 too ... it seems like it was after the October update.

Hello! I have a similar problem. did you find a solution?

Question [CLOSED] Xiaomi 12 Pro Completely Bricked/Dead

Hello, a friend brought this device complete dead, he bricked the phone after attempting to flash global rom, i can't put the device to edl and the computer doesn't detect the device, on charger is drawing power to charge the battery. Is there something different with these snapdragon 8 gen 1 chips? What i'm missing? Warranty or Xiaomi Service Center isn't an option.

The only info in chinese for 12 Pro is this - http://m.shuajibao.com/course/hongminote5a_gao/24583.html
In english didn't find anything

How to Put a Qualcomm Phone into EDL Mode
Qualcomm into EDL - Utilize EDL in Investigations | Magnet Forensics
Emergency Download (EDL) mode is a Qualcomm feature that can allow you to recover data from a device and perform tasks like unbricking or flashing the device. On supported devices, Magnet AXIOM can use EDL to extract a full image.
www.magnetforensics.com
Can this help?

Just for the record, I found the testing points of the Xiaomi 12 PRO, the mobile was set in EDL mode and the Global rom was installed with success.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Nice, compliments!

Are you unlocked phone bootloader?
IF u unlocked it , can u enter fastboot mode by pressing the volume down and power keys
you can go to fastboot and flash official rom to save it .

Liangliang said:
Are you unlocked phone bootloader?
IF u unlocked it , can u enter fastboot mode by pressing the volume down and power keys
you can go to fastboot and flash official rom to save it .
Click to expand...
Click to collapse
The bootloader was unlocked, in order to install the ROM from xiaomi.eu. The mobile was completely dead, no usb, no fastboot

maddoctorgr said:
The bootloader was unlocked, in order to install the ROM from xiaomi.eu. The mobile was completely dead, no usb, no fastboot
Click to expand...
Click to collapse
OH, It's very unlucky. U must enter 9008port to flash it, unluckly I don't know how to enter it.It is recommended that u contact Xiaomi after-sales service

Liangliang said:
OH, It's very unlucky. U must enter 9008port to flash it, unluckly I don't know how to enter it.It is recommended that u contact Xiaomi after-sales service
Click to expand...
Click to collapse
I have written above the mobile is fixed

Hi! Do you know what did they wrong to brick the device?

bandik5 said:
Hi! Do you know what did they wrong to brick the device?
Click to expand...
Click to collapse
I'm now with the ROM from xiaomi.eu
So, what went wrong the first time? I saw this time that despite doing the same things, after the script finished everything, it took some secs to see the MIUI logo, something that never appeared the first time. Also, because I used help this time to be sure that I wont have the same problems as first time, the technician installed me 2 drivers that where missing and the mobile wasn't recognized correctly. I have windows 11. So I guess check drivers, connect original cable directly on pc and cross your fingers that all will work ok.

Just to let you know guys, when the phone is in EDL mode, there's no indication about it, no logo etc. You just have to turn on your phone and it will automatically enter EDL mode if you had a soft brick. To fix it you need to connect your smartphone to the PC and use an EDL flashing enabled account on Mi Flash, that's all. The problem with the OP was that he probably was missing the right drivers and the phone wasn't getting recognised

maddoctorgr said:
12 Pro 的唯一中文信息是 - http://m.shuajibao.com/course/hongminote5a_gao/24583.html
英文没找到
Click to expand...
Click to collapse
啥用没有

can some one please help me to unbrick my xiaomi 12 pro, its completely bricked not charging when connected to the charger and not getting detected in the device manager. i installed all drivers like qualcomm hs 9008 driver, adb fastboot drivers and also drivers from xiaomi. its not getting detected in device manager

@maddoctorgr can you send me the location of test points. I am in similar situation

maheshkondraju said:
can some one please help me to unbrick my xiaomi 12 pro, its completely bricked not charging when connected to the charger and not getting detected in the device manager. i installed all drivers like qualcomm hs 9008 driver, adb fastboot drivers and also drivers from xiaomi. its not getting detected in device manager
Click to expand...
Click to collapse
Have you fixed it yet buddy? Any tips for me ?

karkiankit said:
Have you fixed it yet buddy? Any tips for me ?
Click to expand...
Click to collapse
got a replacement, just received it today.

maheshkondraju said:
can some one please help me to unbrick my xiaomi 12 pro, its completely bricked not charging when connected to the charger and not getting detected in the device manager. i installed all drivers like qualcomm hs 9008 driver, adb fastboot drivers and also drivers from xiaomi. its not getting detected in device manager
Click to expand...
Click to collapse
You must have purchased via amazon right? Can i get your telegram or whatsapp id ?

karkiankit said:
You must have purchased via amazon right? Can i get your telegram or whatsapp id ?
Click to expand...
Click to collapse
no from mi.com

karkiankit said:
@maddoctorgr can you send me the location of test points. I am in similar situation
Click to expand...
Click to collapse
The mobile cannot enter fastboot and is not recognized by pc? Test points are reached only after opening the mobile