Related
I've been running CM 11 for a little more than a month and have been really enjoying it. So, I have no idea why I decided to download the MythTools and revert back to stock At&t. Doing so, I messed something up on my phone.
To start, I'm using Windows 7 64bit and when selecting option 1 (install ADB-fastboot-apkTools) I get the new cmd window that states "please select install button after new window is opened press any key to continue...." when I press any key the cmd window would just close. Hoping it would help, I then chose option 6 to update my Motorola drivers. When my browser window opened I got the ADB installer window and clicked install. It seemed to have installed fine. I then updated my moto drivers. Thinking I was all set I went for option 2 to flash the stock firmware which I had put in the firmware folder. With my phone in fastboot I started the process and it failed. Reading through the cmd prompts I had noticed it said something like 'you selected 2- instal cwm.img cannot load cwm.img' . I unplugged my phone and tried to restart it and it was stuck on the bootloader screen. I then restarted into recovery and my PhilZ recovery did start up. However it displays "E: could not mount /data to setup /data/media path!" . I was still able to go through the process of a clean re-install of CM 11 but am stuck on the startup splash screen for CM.
I definitely got myself in way too deep and am clueless on how to fix this. Would someone mind instructing me on what to try next? Many thanks in advance.
I am not sure if it would make a difference in your situation but I do everything for my phone on an x86 system. I have had issues with LG and Samsung phones in the past when trying things on an x64 computer.
ifixgse said:
I've been running CM 11 for a little more than a month and have been really enjoying it. So, I have no idea why I decided to download the MythTools and revert back to stock At&t. Doing so, I messed something up on my phone.
To start, I'm using Windows 7 64bit and when selecting option 1 (install ADB-fastboot-apkTools) I get the new cmd window that states "please select install button after new window is opened press any key to continue...." when I press any key the cmd window would just close. Hoping it would help, I then chose option 6 to update my Motorola drivers. When my browser window opened I got the ADB installer window and clicked install. It seemed to have installed fine. I then updated my moto drivers. Thinking I was all set I went for option 2 to flash the stock firmware which I had put in the firmware folder. With my phone in fastboot I started the process and it failed. Reading through the cmd prompts I had noticed it said something like 'you selected 2- instal cwm.img cannot load cwm.img' . I unplugged my phone and tried to restart it and it was stuck on the bootloader screen. I then restarted into recovery and my PhilZ recovery did start up. However it displays "E: could not mount /data to setup /data/media path!" . I was still able to go through the process of a clean re-install of CM 11 but am stuck on the startup splash screen for CM.
I definitely got myself in way too deep and am clueless on how to fix this. Would someone mind instructing me on what to try next? Many thanks in advance.
Click to expand...
Click to collapse
you said you are stuck on startup splash meaning bootloop? if it is you should try again with rsd lite.
else you may lose all your data in the memory but do a format media/data and sdcard, so that it can mount /data, it worked for me. then format system mount everyting and do a fresh install of any rom you can sideload or just have it in the sdcard.
I'm pretty sure I am doing something wrong with MythTools. When I select option 2 in the tool to install stock firmware the following happens,
- asks for fimware folder example and I select "N"
- asks if firmware files are finished copying.. I press enter and continue
-then it says "the system cannot find the path specified
the system cannot find the path specified
the system cannot find the path specified
'7z' is not recognized as an internal or external command
operable program or batch file
Are you ready to flash stock fimware...
at this point i stupidly hit enter and that was it with my phone. I'm guessing the tool could not locate the firmware .xml file for extracting and I have no idea why. The compressed folder is IN the firmware folder.
One other question with Mythtools, when installing the tools what path do you want them installed in? I did them in the same file the Myth tools are in.
ifixgse said:
I'm pretty sure I am doing something wrong with MythTools. When I select option 2 in the tool to install stock firmware the following happens,
- asks for fimware folder example and I select "N"
- asks if firmware files are finished copying.. I press enter and continue
-then it says "the system cannot find the path specified
the system cannot find the path specified
the system cannot find the path specified
'7z' is not recognized as an internal or external command
operable program or batch file
Are you ready to flash stock fimware...
at this point i stupidly hit enter and that was it with my phone. I'm guessing the tool could not locate the firmware .xml file for extracting and I have no idea why. The compressed folder is IN the firmware folder.
One other question with Mythtools, when installing the tools what path do you want them installed in? I did them in the same file the Myth tools are in.
Click to expand...
Click to collapse
Disclaimer: Even though this worked for me I am not responsible if you brick your phone, I am simply sharing my experience
Okay, this is not for the faint of heart and is going to sound a little backward but it just worked for me 5mins ago. I am running Windows 8.1 Pro 64bit, so there shouldn't be a problem with your setup. I was having the same problem until I just double clicked on flashing.bat or main.bat instead of running as admin. After all I AM the admin of my PC. Then, it worked perfect...until flashing the tz.mbn file and froze up while writing the file. I thought mmm...it shouldn't take that long to write such a small file, and writing happens on the phone side (I believe) so I hit the phone's power button while leaving the Myth Tools window open, which disconnected the phone obviously. I booted back into fastboot and it continued from where it left off. (Note: I did this a few weeks ago when I lost my radios and manually flashed the modem file, which froze, but I followed the same procedure and it successfully flashed it) Then when it got to the last system.img chunk (it writes it in small chunks of 30mb and the last one is smaller, that's how I knew it was the last one) it froze again. I let it sit for about 5mins just to make sure it was written to the phone the repeated the sequence to reboot manually into fastboot and bang, once again it continued right where it left off. one or two more freezes and voila...it rebooted right back to stock. Any questions don't hesitate to ask.
If this helps you hit that thanks button!
Hi there,
After i flashed OOS 4.0 its saying that i have not installed an sim card.
i have twrp and supersu installed on my device. its kinda strange because a friend of my has the same device and also flashed OOS 4.0 and does not have this problem.
Can you go into settings --> about --> IMEI info and see if your IMEO is displaying properly there.
If it is, go back to settings --> mobile networks and make sure your APN settings are correct in there.
What is your service provider? If your friend's phone/OS/settings are the same and he is on the same carrier as you try copying his APN settings to make sure they match yours.
Otherwise, it might be a faulty sim tray or sim card. Have you tried ejecting the sim card and cleaning out the contact? Then try pushing it back in and make sure it's seated properly. SOmetimes the sim card moves and when you slide the sim tray in it isn't contacting the contacts properly. After you do that reboot your phone.
m0d hipp¥ said:
Can you go into settings --> about --> IMEI info and see if your IMEO is displaying properly there.
If it is, go back to settings --> mobile networks and make sure your APN settings are correct in there.
What is your service provider? If your friend's phone/OS/settings are the same and he is on the same carrier as you try copying his APN settings to make sure they match yours.
Otherwise, it might be a faulty sim tray or sim card. Have you tried ejecting the sim card and cleaning out the contact? Then try pushing it back in and make sure it's seated properly. SOmetimes the sim card moves and when you slide the sim tray in it isn't contacting the contacts properly. After you do that reboot your phone.
Click to expand...
Click to collapse
I tried to put my simcard in his phone and it's immediately asking for my sim cards pincode. and we both have no apn settings its receiving them automatically.
when i go back to OOS 3.5.4 its working just fine.
That's odd... So it's not a hardware fault, it's definitely something with software... Are you flashing the stock 4.0 rom from op site or from somewhere else?
Try flashing from their site or try the nougat stable rom posted here: https://forum.xda-developers.com/oneplus-3t/how-to/zip-flashable-firmware-modem-t3509015
m0d hipp¥ said:
That's odd... So it's not a hardware fault, it's definitely something with software... Are you flashing the stock 4.0 rom from op site or from somewhere else?
Try flashing from their site or try the nougat stable rom posted here: https://forum.xda-developers.com/oneplus-3t/how-to/zip-flashable-firmware-modem-t3509015
Click to expand...
Click to collapse
i did try to flash the rom from the post you just send me. it happens when i install twrp and supersu.
Try this:
NOTE: This WILL wipe everything on your phone so make a backup first!
First Unlock booloader1. On your phone go into Developer screen (Settings --> Developer Options)
If you don't have this go back to Settings --> About Device. Tap "Build number" 7-10 times to unlok developer options
2. In Developer Options turn on "USB Debugging" and "OEM Unlock"
3. Open ADB in command prompt and go to the directory where ADB is.
Type adb reboot bootloader
4. Once your device is in fastboot mode, type in fastboot devices to make sure your device is listed
5. Type in fastboot oem unlock to unlock your device bootloader
You can check to make sure it was properly unlocked by typing in fastboot oem device-info.
6. Reboot into your system
Files we need7. Download the following files:
TWRP - https://build.nethunter.com/test-builds/twrp/oneplus/twrp-3.0.2-0-oneplus3t.img
No-verity-opt-encrypt - https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.0.zip
Magisk - http://tiny.cc/latestmagisk
Phh-Superuser - https://forum.xda-developers.com/attachment.php?attachmentid=3988488&d=1483407725
Latest Stable Nougat Rom - http://otafsc.h2os.com/patch/amazon...s3TOxygen_28_OTA_035_all_1612310259_2dc0c.zip
8. Copy all the files to your phone (keep the original on your pc just in case)
9. Load back up to fastboot mode
In ADB type adb reboot bootloader
10. Flash twrp img we downloaded above by typing
fastboot flash recovery twrp-3.0.2-0-oneplus3t.img
11. After this reboot into the system
Install all of our downloaded files through TWRP12. Now boot into recovery by issuing the following ADB command
adb reboot recovery (you should go into TWRP)
13. Once you're in twrp flash the "no-verity-opt-encrypt-5.0.zip" file OR you can format the data partition to f2fs to prevent the dm-verity error.
14. Now install the stock stable nougat rom we downloaded above
15. Do a factory system wipe / cache & dalvik
16. Install magisk through TWRP
17. Wipe cache/dalvik
18. Install phh SuperUser
19. Now reboot into the system normally.
NOTE: This *COULD* take a while since you did a clean install of nougat so just be patient and you should be good to go after this.
BeyondRico said:
Hi there,
After i flashed OOS 4.0 its saying that i have not installed an sim card.
i have twrp and supersu installed on my device. its kinda strange because a friend of my has the same device and also flashed OOS 4.0 and does not have this problem.
Click to expand...
Click to collapse
im using my op3t quite a while now including flashing different recoverys and performing several factory resets .. ive had never such an issue yet but strangely today i had the same issue like you.
i didnt changed anything at all (just did a normal factory reset because of the new twrp beta1 for encryption) - as the notification appeared i just rebooted and everything was fine again (like before) .. maybe your sim card is not in a good position in the simcard slider? i dont think that this is a software issue because it dissapeared for me without any changes on software.
First, thanks to @Uzephi and @41rw4lk for helping me to use/recover my phone. Please, read and do not underestimate the guides: our phone is tricky! We have two system partitions (slot a and b) to allow stock updates on-the-fly. This complicates the normal flashing process and if you do not follow the steps, you may bootloop. Use these guides at your own risk!
Reading this page is a good beginning to understanding the A/B partitioning scheme and how Motorola Z2 Force works:
1) Our phone has A/B partitioning, so flashing Magisk/XPosed is different
2) It does not support Project Treble (faster stock updates)
3) It does not a recovery partition, so flashing TWRP is different
Note also that the RSD Lite from Motorola has issues with Windows 10 and you’ll need to manual flash firmware if you bootloop (see Process E below). Other way is directly flashing from Qualcomm EDL mode (Emergency Download Mode) from which users can perform various tasks like unbricking, unlock bootloader, and installation of any custom ROMs.
Right now, this guide has 5 parts (maybe we can dual boot our phone in the future). If you just want to use a rooted stock ROM, please, search for other guides here on xda. These guides were written (and tested) using a Motorola Z2 Force XT1789-05 phone (Brazil), although most of it should work for other variants if you download and use proper firmware files for these other phones. For other models, better if you follow Uzephi’s guide.
A. Opening bootloader
B. Preparing the phone to move into custom ROMs (AOSP) + TWRP recovery
C. Flashing a custom AOSP ROM + rooting
D. Dirty flashing AOSP ROM updates
E. Recovering from bricks or returning to stock
F. Oreo ROM features comparison table
If you want to move your Motorola Z2 Force to Project Treble ROMs, please, check this guide.
Here is a list of the ROMs that are waiting for you.
A. Opening bootloader
With enough battery in your phone (80%), you can follow the Motorola official guide which steps are:
1. Backup everything you need. Your phone will be reseted including the internal sdcard.
2. Into the phone, enable the Developer Options clicking 7 times over the version (About section in the Settings). Go to Developer Options, click the OEM unlock option to enable it. Also enable USB debugging.
3. Install the Motorola drivers in your computer, but (in my personal experience) not the Android SDK suggested in the official guide. Instead, extract these adb/fastboot files in a blank folder of your computer.
3.1) Do not use other adb/fastboot binaries: I cannot guarantee they will work.
3.2) You need to use a USB 2.0 port of your computer. Some users report that USB 3.0 will also work.
4. Open a command line window in the adb/fastboot folder (step 3), reboot the phone into the bootloader (see adb command below or press power + volume down buttons). Plug the phone on computer (see 3.2 above). Test the connection and run the command to get the code for unlocking:
Code:
adb reboot bootloader
fastboot devices
fastboot oem get_unlock_data
You’ll get:
Code:
(bootloader) Unlock data:
(bootloader) <code 1>
(bootloader) <code 2>
(bootloader) <code 3>
(bootloader) <code 4>
(bootloader) <code 5>
5. You’ll need to join 5 codes and, after logging into your own Motorola account, check by clicking the button “Can my device be unlocked” (step 6) by Motorola here. Read the text: your warranty will be void if you go ahead. Consider if you have enough knowledge, time and money to deal with a troublesome (or bricked) device. Although, it’s not that easy to hard brick this phone (see process E below).
Code:
<code 1><code 2><code 3><code 4><code 5>
6. You’ll receive back an email with the code to unlock your bootloader (if it is available for your model). Then you’ll run the following command:
Code:
fastboot oem unlock <code 1><code 2><code 3><code 4><code 5>
7. You’ll receive a warning that all your data would be erased (see step 1 above) and need to re-run the same command to confirm. At this point, your bootloader should be unlocked. As an Android restriction, each time you boot the phone you’ll see a warning. Do nothing, wait for 5 seconds and the phone boots normally. Some users bother with this warning and try to get rid of it.
B. Preparing the phone to move into custom ROMs (AOSP) + TWRP recovery
Requirements: unlocked bootloader (see guide A) and no security lock: disable PIN, gestures and fingerprinting (because TWRP cannot read the locked/cryptographed data of the phone). Enough battery in your phone (80%).
If you do not prepare your phone to custom ROMs and if you do not have both bootloaders of the phone in the same Android version of the ROM you’ll flash, you’ll hard brick the phone and lose also the access to the bootloader! You’ve been warned: follow the guide!
Note: if you hard brick, I suggest you be prepared to follow the Unbrick Qualcomm mobiles with Step-by-step guide or the Unbrick All Qualcomm Snapdragon’s from Qualcomm HS-USB QDLoader 9008 guide, but I never tested them myself. You can also use Qualcomm Flash Image Loader (QFIL) tool.
1. Backup everything you need. Your phone will be reset including the internal sdcard.
2. Into the phone, enable the Developer Options clicking 7 times over the version (About section in the Settings). Go to Developer Options and enable USB debugging.
3. Install the Motorola drivers and the adb/fastboot files.
3.1) do not use other adb/fastboot binaries: we cannot guarantee they will work.
3.2) you need to use a USB 2.0 port of your computer. Some users report that USB 3.0 will also work.
4. Download the firmware of the same Android major version of the future ROM you’ll install (Oreo for Oreo ROMs, for instance). When (and if) we move to Android P, most probably we will need to follow this guide again.
- Retail (XT1789-05) (Europe/Brazil).
- Other models (branded): ATT, Sprint, T-Mobile (TMO), USC, Verizon.
- Note: NPXS26 versions stand for Nougat and OPXS27 for Oreo. You do not need Nougat versions for anything.
5. Extract the zip contents to a blank folder in your computer.
6. Download the FlashAll_XT1789-05.zip file, extract the content and move all files to the same firmware folder (step 5 above). Be sure to overwrite any file (if needed).
7. Run the Preparation.bat file there to generate the flashfile.bat file that will send the commands to the phone. Credits: the original preparation files were from RootJunky (can be downloaded here) and include more options that we do not need for our purpose here. Also, it includes adb/fastboot binaries that could not work with our phone.
8. Reboot the phone into the bootloader (see adb command below or power + volume down buttons). Open a command line window in the firmware folder (step 5 above), test the connection and execute the flashfile.bat file generated on step 7.
Code:
adb devices
adb reboot bootloader
fastboot devices
flashfile.bat
Never ever unplug the device from the USB 2.0 port while flashing the firmware. This could cause a hard brick and your device will be dead.
9. There is a pause at the end. You should review if everything went fine (or even click on the menu of the command line window, select all and copy&paste the contents in a .txt file for further help/revision).
10. Reboot your phone into the system (ROM) and do a quick configuration (remember that everything will be deleted when you install TWRP further…).
11. Into the phone, enable the Developer Options clicking 7 times over the version (About section in the settings). Go to Developer Options and enable USB debugging.
12. Download both the .img and .zip file of the TWRP recovery from the official site. It's the same file for all models/variants of Z2 Force phone. Put the files into our firmware folder (step 5 above). Copy the .zip file to the phone internal card. Note: versions older than 3.2.2-2 does not support PIN/Password/Fingerprint, so disable them before proceed. Most probably, ROMs before July 20th, 2018 cannot be flashed in older TWRP.
13. Now boot (not flash) the TWRP .img file using a command line window in the same firmware folder (step 5 above):
Code:
adb devices
adb reboot bootloader
fastboot devices
fastboot boot <TWRP file name>.img
14. Only now that you’re inside TWRP temporarily flash the TWRP .zip file you’ve saved into the phone (step 12 above).
15. Reboot into TWRP (use the main reboot menu in TWRP).
16. Now, you should reboot again into bootloader: inside TWRP, go to Reboot menu and choose Bootloader.
17. Now you will wipe all user data via bootloader. This is necessary to use an AOSP ROM when you come from stock. Using a command line window in the same firmware folder of your computer (step 5 above), run the following commands:
Code:
fastboot devices
fastboot -w
18. Now you can reboot the phone into System using the buttons volume up/down to navigate and confirming with the Power button. You’ll be with stock ROM and TWRP. If you want to move to a custom AOSP ROM, do a quick configuration: into the phone, enable the Developer Options clicking 7 times over the version (About section in the settings). Go to Developer Options and enable USB debugging and go to the proper guide (Process C).
C. Flashing a custom AOSP ROM + rooting
1. Requirements:
1.1 Motorola drivers.
1.2 Our custom adb/fastboot files (others may not work!).
1.3 USB debugging enabled into the Developer Options.
1.4 If you're using TWRP older than 3.2.2-2, disable disable PIN/gestures/fingerprinting. Also, most probably, ROMs after July 20th, 2018 cannot be flashed in older TWRP.
1.5 An USB 2.0 port of your computer (some users report that USB 3.0 will also work).
1.6 Two Oreo bootloaders (process B above).
1.7 Permanent TWRP
1.8 Enough battery in your phone (80%).
2. Download the AOSP ROM you want and move the .zip files to the phone. Right now, we have:
2.1 Dirty Unicorns: no need for Gapps. Official and Weeklies can be dirty flashed interchangeably. RC has a different signature. Support on Google+ page. More about DU kernel.
2.2 Lineage OS 15.1. MindTheGapps needed. OpenGapps not compatible yet. XDA thread.
2.3 Mokee: Gapps needed. Take care: online guides assume that you already have an AOSP ROM, TWRP and rooted device.
Deprecated (?)
2.4 AOSiP: no need for Gapps. XDA thread.
2.5 Invictrix. Gapps are built in. XDA thread
3. Choose the root method and download the .zip files: Magisk (suggested) or LineageOS SU Addon. Move the .zip files to phone. Note: if you bootloop on Magisk, most probably you’re flashing a wrong/different version of Magisk or you did not reboot between flashing ROM/Gapps and Magisk. Note: SuperSu is deprecated.
4. Reboot into TWRP:
Code:
adb reboot recovery
Then flash the ROM. It will be flashed in two steps only in the “other” slot. We have two slots, A and B. Our phone can be upgraded on-the-fly because the update is always applied to the slot not booted, the “other” slot. Then, immediately, flash the .zip TWRP or you will lose it.
5. Go to Reboot menu of TWRP and reboot into bootloader. Then, in the folder with adb/fastboot binaries (see 1.2 above), you need to wipe data (including sdcard) with the following commands:
Code:
fastboot devices
fastboot -w
6. Now you need to reboot the phone into System using the buttons volume up/down and confirming with the Power button (or typing fastboot reboot into the command line windows). You’ll be with an AOSP ROM and TWRP.
7. Once into the phone, enable the Developer Options clicking 7 times over the version (About section in the settings). Go to Developer Options and enable USB debugging if you intend to dirty flash ROM updates.
8. Reboot into TWRP again, flash Magisk (your settings and modules will be preserved). Note: if you bootloop on Magisk, remember it is mandatory to reboot between ROM flash (step 4 above) and GApps/Addon flash due to verity/slot-swap logic.
9. A good place to read what is not working is in the section known problems of LineageOS.
D. Dirty flashing AOSP ROM updates
1. If you follow all the processes above, you can dirty flash updates because you have:
1.1 Motorola drivers installed.
1.2 Specific adb/fastboot files for our phone and an USB 2.0 port in a Windows computer (some users report that USB 3.0 will also work).
1.3 Unlocked bootloaders (Process A above).
1.4 Permanent TWRP running and TWRP .zip file placed inside your phone and ready to be flashed again.
1.5 An AOSP ROM already running.
1.6 Developer Options and USB debugging enabled.
1.7 If you're using TWRP older than 3.2.2-2, disable disable PIN/gestures/fingerprinting. Also, most probably, ROMs after July 20th, 2018 cannot be flashed in older TWRP.
1.8 Enough battery in your phone (80%)
2. Download your ROM .zip update, copy it into the phone sdcard and reboot your phone into TWRP. See download links here.
3. Within TWRP you should flash (install) things in the following order:
3.1 ROM update .zip file. Remember that, at this time, the update will be flashed int the other slot and inside phone you’ll have both the system before update (in the booted slot) and updated ROM in the other slot.
3.2 TWRP .zip file (step 1.4 above) once again (do not skip this step or you’ll bootloop!).
4. Reboot to System: if you skip this step, you’ll bootloop.
5. Reboot into TWRP again, flash Magisk (your settings and modules will be preserved) or LineageOS SU Addon .zip file. Note: if you bootloop on Magisk, most probably you’re flashing a wrong/different version of Magisk. I suggest v16.0 and, after you got rooted with 16.0, you can update. It is mandatory to reboot between ROM flash (step 4 above) and GApps/Addon flash due to verity/slot-swap logic.
Note: SuperSu is deprecated.
6. Wipe Dalvik/ART cache: go to Wipe menu of TWRP > Advanced Wipe > Dalvik/ART Cache only.
7. Reboot your phone into System (ROM) will use the “other” slot, the one with the updated ROM.
8. You can use XPosed installer app (and reboot).
9. Now you can add your PIN, fingerprint, gestures back until next flashing.
E. Recovering from soft bricks or returning to Stock
If you’re reading this is because you already unlock your bootloader (see guide A) and anything went wrong, but you still can boot your phone into bootloader. Plug your phone and get enough battery (even if you do not see any charging signal).
1. Install the Motorola drivers and the specific adb/fastboot files for our phone. Remember, follow the rules because our device is tricky!
1.1) Do not use other adb/fastboot binaries: we cannot guarantee they will work.
1.2) You need to use a USB 2.0 port of your computer (some users report that USB 3.0 will also work).
2. Download the latest firmware for your model:
- Retail (XT1789-05) (Europe/Brazil).
- Other models (branded): ATT, Sprint, T-Mobile (TMO), USC, Verizon.
- Note: NPXS26 versions stand for Nougat and OPXS27 for Oreo. You do not need Nougat versions for anything.
3. Extract the zip contents to a blank folder in your computer.
4. Download the FlashAll_XT1789-05.zip file (it should work for other Motorola Z2 Force models as well), extract the content and move all files to the same firmware folder (step 2 above). Be sure to overwrite any file (if needed).
5. Run the Preparation.bat file there to generate the flashfile.bat file that will send the commands to the phone. Credits: the original preparation files were from RootJunky (can be downloaded here) and include more options that we do not need for our purpose here. Also, it includes adb/fastboot binaries that could not work with our phone.
6. Reboot the phone into the bootloader (see adb command below or power + volume down). Open a command line window in the firmware folder (step 5 above), test the connection and execute the flashfile.bat file generated on step 5.
Code:
adb reboot bootloader
fastboot devices
flashfile.bat
Never ever unplug the device from the USB 2.0 port while flashing the firmware. This could cause a hard brick and your device will be dead.
7. There is a pause at the end. You should review if everything went fine (or even click on the menu of the command line window, select all and copy&paste the contents in a .txt file for further help/revision).
8. Reboot your phone into system (ROM) and do not forget, later, to enable the Developer Options and USB debugging again.
Note: if you hard brick, I suggest you be prepared to follow the Unbrick Qualcomm mobiles with Step-by-step guide or the Unbrick All Qualcomm Snapdragon’s from Qualcomm HS-USB QDLoader 9008 guide, but I never tested them myself. You can also use Qualcomm Flash Image Loader (QFIL) tool. Maybe these Latest 2017 Qualcomm Diag QD-Loader Windows 10 Drivers signed will help you.
F. Oreo ROM features comparison
This is a table for Oreo ROM features comparison for Motorola Z2 Force - nash.
I would like to receive feedback and updates from the users, as I can't keep changing from one ROM to another and they get new features, updates, improvements, etc.
I consider Lineage OS 15.1 our stock ROM regarding to customization. So, it's not listed there.
Legend:
Code:
X = Feature present
XX = ROM excels in this particular feature (in my opinion).
If you want to move your Motorola Z2 Force to Project Treble ROMs, please, check this guide.
Here is a list of the ROMs that are waiting for you.
I came back to stock ROM. the problem is that it gets stuck in the initial configurations of the android trying to find a wifi network, to continue the configuration, without success, because I see in fastboot that the baseband is unknown, and I also can not install any rom, or recovery image because I have the following message in fastboot: FLASHING_LOCKED. and since I can not get past the initial android settings, I also can not unlock the developer options to enable OEM unlocking. now I'm standing in a rom that does not leave the initial configuration, it does not connect to any network and a fastboot that does not let me install anything. and I also tried the recovery mode and even tried to install an update via sideload, without success. I do not know what else to do if you can give me a light.
renanjones said:
I came back to stock ROM. the problem is that it gets stuck in the initial configurations of the android trying to find a wifi network, to continue the configuration, without success, because I see in fastboot that the baseband is unknown, and I also can not install any rom, or recovery image because I have the following message in fastboot: FLASHING_LOCKED. and since I can not get past the initial android settings, I also can not unlock the developer options to enable OEM unlocking. now I'm standing in a rom that does not leave the initial configuration, it does not connect to any network and a fastboot that does not let me install anything. and I also tried the recovery mode and even tried to install an update via sideload, without success. I do not know what else to do if you can give me a light.
Click to expand...
Click to collapse
I see two possible scenarios:
1. Your bootloader is locked (yet) (see guide A).
2. Your in a "false locked" situation that, maybe, could be solved by resetting data via recovery or in bootloader (with the command: fastboot -w).
Great tutorial, but I did not get 4g in any of the roms, only 3g
Gutto said:
Great tutorial, but I did not get 4g in any of the roms, only 3g
Click to expand...
Click to collapse
I got 4G in any ROM... AOSIP, DU or Invictrix...
Are you using a branded (carrier) phone? If not, maybe you should return to stock (to recover any changes on partitions).
Technical said:
I got 4G in any ROM... AOSIP, DU or Invictrix...
Are you using a branded (carrier) phone? If not, maybe you should return to stock (to recover any changes on partitions).
Click to expand...
Click to collapse
My cell phone and Sprint, I did every process that you indicated, but not 4G
So I followed the instructions as noted, as soon as I got to the root installation part, it started throwing a "cannot mount /system" error. I thought a reboot would solve the issue, but now I think I'm bricked. Can't boot into anything, all I can do is plug my phone in and listen to it keep disconnecting every 10 seconds or so. The phone had booted up fine prior to starting the installation process, and I don't see how just a bad ROM install is preventing me from getting into either bootloader or recovery. Any advice?
For clarity, i'm unable to use QBOOT to do anything since after it hits the "powered on" state I'm assuming it's in, it just resets and does the same thing over and over again
shalpp said:
So I followed the instructions as noted, as soon as I got to the root installation part, it started throwing a "cannot mount /system" error. I thought a reboot would solve the issue, but now I think I'm bricked. Can't boot into anything, all I can do is plug my phone in and listen to it keep disconnecting every 10 seconds or so. The phone had booted up fine prior to starting the installation process, and I don't see how just a bad ROM install is preventing me from getting into either bootloader or recovery. Any advice?
For clarity, i'm unable to use QBOOT to do anything since after it hits the "powered on" state I'm assuming it's in, it just resets and does the same thing over and over again
Click to expand...
Click to collapse
Have you tried holding vol dwn + pwr btn to force it into bootloader mode? If you can get there, then you can use the keys to get to recovery and try a factory reset. If that don't work, go back to bootloader mode and try flashing back to stock. Might double check that the battery has plenty of charge.
41rw4lk said:
Have you tried holding vol dwn + pwr btn to force it into bootloader mode? If you can get there, then you can use the keys to get to recovery and try a factory reset. If that don't work, go back to bootloader mode and try flashing back to stock. Might double check that the battery has plenty of charge.
Click to expand...
Click to collapse
I'm unable to get the phone out of qboot (or whatever it's called). I've tried using a blank-flash but all that happens is device restarts as made evident by the "device disconnect" sound playing every few seconds. The phone had around 80% when I started the process. Should I just let it die and try loading into BL after a few hours of this thing power cycling itself?
shalpp said:
I'm unable to get the phone out of qboot (or whatever it's called). I've tried using a blank-flash but all that happens is device restarts as made evident by the "device disconnect" sound playing every few seconds. The phone had around 80% when I started the process. Should I just let it die and try loading into BL after a few hours of this thing power cycling itself?
Click to expand...
Click to collapse
It's weird that it is power cycling like that. Have you tired unplugging the phone and booting? Whether it's recovery, bootloader, qboot; you need to get to one place or the other if possible because power cycling won't allow you to do anything. If you can get a stable boot in any mode I would suggest moving your cable to another port so any corruptions aren't a factor anymore. I don't think a drain will resolve anything, but I've never heard anyone mention power cycling like that.
41rw4lk said:
It's weird that it is power cycling like that. Have you tired unplugging the phone and booting? Whether it's recovery, bootloader, qboot; you need to get to one place or the other if possible because power cycling won't allow you to do anything. If you can get a stable boot in any mode I would suggest moving your cable to another port so any corruptions aren't a factor anymore. I don't think a drain will resolve anything, but I've never heard anyone mention power cycling like that.
Click to expand...
Click to collapse
Power cycling is just an assumption since regardless of whatever port its in it keeps an endless loop of connect, disconnect". Basically after rebooting the device after attempting to install the ROM is when it went black and started not doing anything other than connect, disconnect
shalpp said:
Power cycling is just an assumption since regardless of whatever port its in it keeps an endless loop of connect, disconnect". Basically after rebooting the device after attempting to install the ROM is when it went black and started not doing anything other than connect, disconnect
Click to expand...
Click to collapse
When it's trying to connect do you have a pop up on your pc showing what it sees the phone as? Does it say nash fastboot, or 9008, Z2? That might give some idea of where it's failing.
41rw4lk said:
When it's trying to connect do you have a pop up on your pc showing what it sees the phone as? Does it say nash fastboot, or 9008, Z2? That might give some idea of where it's failing.
Click to expand...
Click to collapse
It appears as Qualcomm 9008
It only starts the loop after starting a blankflash. That's about the only response I get out of the device, otherwise it does absolutely nothing, no combination of buttons do anything
Edit: Confirmed connect/disconnect on another machine with the same driver configuration
/*** BEGIN DISCLAIMER ***/
If you follow this procedure and lose every bit of content on your device / end up with a fancy paperweight, I, nor anyone involved with the referenced open source or otherwise licensed projects is responsible. It's all on you, and this will void your warranty. Do not proceed if you don't understand something. Chances are you will have a bad time.
/*** END DISCLAIMER ***/
Hey everyone - my Samsung Galaxy Tab A 10.1" (2019) - SM-T515 - recently applied a security update without my consent (The Samsung Android 11R September 8th 2021 Security update - side note, make sure that you turn off Samsung's push service ), which canned my previous root access. I use server software and internal port forwarding to do... Things on my device, so I needed my root access back.
Here's how I retrieved it, and how I put TWRP in place as my recovery partition in the process.
The Tools
Make sure you have these before you start. Because this is a Samsung device, you'll have to do some things under Windows, like using Frija and Odin (unfortunately).
1.) Frija - Available here - https://forum.xda-developers.com/t/tool-frija-samsung-firmware-downloader-checker.3910594/
2.) The latest SM-T515 / SM-T510 firmware from Samsung for your device's CSC (if you use the firmware for the wrong CSC code the most common problem that I have seen as a result is typically incorrect partition sizes after flashing, which can be corrected with TWRP). Frija is listed first, because you'll use Frija to get this directly from Samsung.
3.) Some kind of generic tool that you're comfortable with for working with archives. Ideally whatever tool you choose should be able to work with .tar, .gz, and .zip archives for this process. Personally I like 7-Zip on *Nix and Windows, and ZArchiver on Android.
4.) Odin (firmware flash tool by Samsung) - attached.
5.) The latest Samsung device USB drivers for your environment (they're fine as long as they enable both ADB and MTP correctly) - available here https://developer.samsung.com/mobile/android-usb-driver.html
6.) The latest TWRP image for Samsung SM-T5xx devices - available here https://androidfilehost.com/?fid=14943124697586374577 (and attached)
7.) ADB - downloading / installing and using adb are outside the scope of this post. It is available here - https://forum.xda-developers.com/t/...vers-15-seconds-adb-installer-v1-4-3.2588979/
8.) The latest Magisk APK file - available here https://github.com/topjohnwu/Magisk/releases/download/v23.0/Magisk-v23.0.apk
The Process
0.) Back up your stuff, and remove your SD card if it makes you more comfortable - do whatever you need to do to be comfortable with "I might lose EVERYTHING on this device." If you plan on following this procedure, you should know how to do this, and I'm not going to try to explain it. If you can't get past this part, you should stop while you're ahead and still have a device that boots.
1.) Unlock your bootloader.
2.) Download the most recent firmware package for your device using Frija and extract all of the individual .md5 files which it contains.
2.) Use Odin to flash the most recent firmware to your device, and factory reset / wipe / format partitions and caches until you have a clean device that boots correctly. If your partitions aren't sized properly at this point it isn't something to be too concerned with, as you can correct them later using TWRP.
3.) Turn developer options back on, enable USB debugging, set the default USB configuration to "File Transfer", connect your device to your PC and copy the Magisk APK over to the internal storage of your device.
4.) Remove .md5 from the filename of the AP file that was included in your firmware package from Samsung and extract its contents into its own directory.
5.) Extract the contents of the latest TWRP package for these devices into the same directory where you extracted the individual partition image files contained in the AP file. Overwrite contents in the destination directory as necessary. The TWRP package should contain three files - param.bin.lz4, recovery.img.lz4, and vbmeta.img.lz4 - If there are uncompressed images (.img files) that correspond to the LZ4 compressed images from the TWRP package in the AP file of your firmware package, remove them first. Odin will (understandably) freak out if you try to flash two different images to the same partition in the same flash operation.
6.) Compress the contents of your modified AP directory which now contains the TWRP package's contents into a tar ball on your PC, and then copy it somewhere that Magisk will be able to access it on the Internal storage of your device (the Downloads directory - "/storage/emulated/0/Downloads/" is a good choice).
7.) Copy the latest Magisk APK to your device (again, the Downloads directory is a good choice), and then install it on your device.
8.) Launch Magisk on your device and choose "Install". Be sure to uncheck the "Recovery Mode" option. We don't want to use "Recovery mode" for Magisk's patching process. Even though this is a Samsung device and this would normally be how to proceed, in this case we're using our own custom TWRP recovery partition, and we don't want Magisk to mess with it. So make sure you aren't patching the bootloader or recovery images in unnecessary ways with Magisk.
9.) In Magisk on your device, choose "Select and patch a file" and then choose the AP file that you created and copied to the device which now contains TWRP as its recovery partition.
10). Let Magisk do its patching and when it has completed take note of where the patched file which it generated was written.
11.) Launch a command line / Powershell / Bash terminal where you can perform ADB commands, and issue the command "adb pull "/storage/emulated/0/Download/magisk_patched-23000_xYzXyZ.tar" (replace "XyZxYz" with whatever random sequence of characters that Magisk generated during its patching operations) to use ADB to download the patched AP file from your device.
12.) Power off your device.
13.) Reboot your device into FANCY download mode by holding the volume up and volume down keys simultaneously while inserting a USB cable that is connected to your PC into your device's USB C charger port. Your device should boot as you insert the USB cable and your bootloader should already be unlocked, so when prompted press the volume up button to continue.
14.) Launch Odin on your PC, and choose the BL, CP, CSC, and UserData images from the firmware package that you retrieved from Samsung to flash the corresponding slots in Odin. In the AP file slot, choose the Magisk patched AP file which contains TWRP as its recovery partition which you retrieved previously using ADB.
15.) Start the flash operation in Odin, and wait patiently for it to complete. Stay alert, because if you left "Auto reboot" checked in the Odin options, your device will reboot immediately upon completion, and there are actions that you need to take while the device is in its "off" state before it re-launches itself.
16.) Once the Odin flash operation has completed, boot to recovery mode. If you left "Auto reboot" checked in Odin, immediately as the flash operation completes, press and hold the power key and the volume up key and remove the USB cable from the device. Otherwise press and hold the power button and the volume down button until the device restarts, and while the device is in its "off" state remove the USB cable and press and hold the power button and the volume up button during device restart to enter recovery mode.
17.) Immediately upon entering recovery mode you should see TWRP do a couple of things that ensure that Samsung's device protection solutions don't remove it. Once those operations have completed, reboot into the system partition.
18.) Your device should be BASICALLY ready to go. Go through the steps to "complete" setup as you see fit. If you have not already done so, connect your device to a WiFi or to an LTE network and then launch the Magisk application.
19.) Magisk may want to download updates, if it does, let it do so.
20.) Once any necessary updates / downloads have completed, re-launch Magisk and it should present you with a prompt to the effect of "Magisk is installed, but additional configuration needs to be done on your device for it to work the right way. Do you want to reboot now?" If you've made it this far, the answer is "Yes, please do."
21.) After rebooting, your device will now be configured, and be running TWRP in its recovery partition, along with a properly Magisk rooted system partition.
22.) ????
23.) PROFIT!
I hope this helps some people out!
- The Scarecrow - 2021/09/22
Has anyone besides been successful?
mydjtl said:
Has anyone besides been successful?
Click to expand...
Click to collapse
I can provide screenshots from the device that I did this to if you would like.
It's pretty cool to see the TWRP logo on a Samsung Tab series device that's running Android 11.
I don't even get the little Samsung warning prompt during device bootup that says "This device's software can't be verified" or whatever Samsung's custom ROM message is. All I get is the "This device's bootloader is unlocked" message, no warning about the integrity of the software.
mydjtl said:
Has anyone besides been successful?
Click to expand...
Click to collapse
Follow this simple as he'll no need to read all these things
pankspoo said:
Follow this simple as he'll no need to read all these things
Click to expand...
Click to collapse
Yeah - pretty much exactly that, except I Magisk patched the system image, and then copied the TWRP package's vbmeta and recovery image into the AP file for the Odin flash, and then flashed every slot rather than just the AP.
is it systemless root?
Will this work on Galaxy Tab A sm-t595? on android 10?
or know of a root guide that will work with said device?
If you dont untick auto reboot, how do you fix any issues that happen because of it?
I rooted my t500 but I think it auto rebooted, which then caused a vbmeta error that stopped it booting. It worked again after flashing the stock rom, but now it gives a vbmeta error if I try to flash a modded rom to root it and I cant get oem unlock to appear in the stock os (download mode says its already unlocked tho)
Hello,
Code:
9.) In Magisk on your device, choose "Select and patch a file" and then choose the AP file that you created and copied to the device which now contains TWRP as its recovery partition
Step 9 yields an error on T515 : Unsupported/Unknown image format
I also tried to install AP patched file with Odin, same result.
Any idea ?
Damn this works so nicely, thanks mate! Cheers!
Please note, the TWRP image used IS NOT the official TWRP image.
I am not responsible for any any harm, such as bricking, or bootloops, which may happen to your device. This is what worked for me.
Warning
As stated by @beatbreakee , do not flash anything on a T-Mobile related device.
Please read beatbreakee's comment regarding this.
Warning
This has only been tested on Android 13. This guide may not work for other Android versions.
Prerequisites
Unlocked Bootloader
Magisk 25.2 Installation ZIP (see attached files)
TWRP Image (download from GDrive)
ADB and Fastboot tools are installed on your machine. Please see this guide
Android 13
Spoiler: Step 1 - Unlocking Bootloader
Step 1 - Unlocking Bootloader:
1.A - Enable OEM Unlocking:
1. Open Settings Application -> About device -> Version -> Tap on Build Number 7 times
2. Open Settings Application -> Additional Settings -> Developer Options
3. Enable OEM Unlocking
4. Enable USB Debugging
1.B - Entering Bootloader
The bootloader must be unlocked in order to flash the recovery.
Ensure the device is connected to the computer via ADB by entering the following command
Code:
adb devices
The output should be something similar to this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(note the device name on the left will not be the same)
Reboot into the bootloader by entering the following command:
Code:
adb reboot bootloader
1.C - Unlock
Once entered, enter the following command:
Code:
fastboot flashing unlock
WARNING: THIS WILL WIPE ALL DATA ON THE DEVICE
Use the volume keys to select unlocking, and then use the power button to confirm.
Once complete, enter the following command:
Code:
fastboot reboot
You will now have to go through the device setup.
Repeat steps 1.A and 1.B to enter back into the bootloader
Spoiler: Step 2 - Flashing TWRP
Step 2 - Flashing TWRP:
2.A - Entering Bootloader
Repeat steps 1.A and 1.B to re-enter the bootloader
2.B - Flashing TWRP:
Again, this IS NOT the official TWRP image. I am not responsible for any harm which this may cause to this device. That being said, it appears to be functional.
The image used is from a leak found on this XDA post
This is not a bootable image. You must flash. fastboot boot img will not work
Enter the following commands to flash the TWRP image:
Code:
fastboot flash recovery_a twrp.img
Code:
fastboot flash recovery_b twrp.img
Code:
fastboot reboot recovery
You should notice you are in TWRP.
You may need to change the language to English.
2.C - Changing TWRP Language:
1. Tap on the button on the Second column, Third Row
2. Tap on the World icon
3. Select your language
4. Tap on the button on the bottom right corner of your display.
2.D - Booting into your phone
1. Select Reboot
2. Select System
You should now have successfully booted in the system with TWRP installed as your recovery
Spoiler: Step 3 - Flashing Magisk
Step 3 - Flashing Magisk:
3.A Preparing the Device:
1. Move the Magisk-v25-2.zip to your device
2. Reboot into your recovery / TWRP
This can be done by entering the following ADB command:
Code:
adb reboot recovery
3.B - Flashing Magisk:
1. Tap Install
2. Select the Magisk-v25-2.zip
3. Swipe to flash (this may take some time)
4. Tap Reboot
5. Tap System
You should now enter the device
3.C - Installing Magisk APK
Install the Magisk APK, click here to download the APK.
Install the APK, and you should have root!
Spoiler: Fixing Data Backup [Optional]
If you encounter a createTarFork() exited with error 255, do the following:
1. Reboot into TWRP
2. Select File Manager
3. Navigate to /data
4. Copy /data/fonts into /sdcard/
5. Copy /data/nandswap into /sdcard/
6. Delete /data/fonts
7. Delete /data/nandswap
The error should now be resolved
The deleted files should not cause any issues. If any issues do occur, then promptly restore them using the backups made to /sdcard/.
Spoiler: Bypassing Safetynet [Optional]
Step - Bypassing Safetynet:
This is optional; however, highly recommend
Note, due to the nature of Safetynet, this can change at anytime and may begin failing in the future.
A - Repackaging Magisk
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Tap "Hide The Magisk App"
4. Enter New Application Name
5. Click OK and wait
6. Uninstall original Magisk APK if it has persisted
B - Enable Zygisk & Deny List
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Enable "Zygisk"
4. Enable "Enforce Deny List"
C - Configure Deny List
it is recommended to add any application you would like to hide from Magisk here
1. Launch Magisk Manager
2. Tap Settings Icon (Top Right Corner)
3. Tap "Configure DenyList"
4. Tap the 3 dots in the top right and select "Show System Apps"
5. Select the following applications:
~ Android System
~ Google Play Store
~ Google Play Services
~ Google Services Framework
D - Delete App Data
1. Launch Settings Application
2. Select Apps
3. Select App Management
4. Clear data for the following apps:
~ Google Play Store
~ Google Play Services
~ Google Services Framework
5. Reboot the device
E - Flash Universal Safetynet Fix
1. Download the Universal Safetynet Fix
2. Launch Magisk
3. Select Modules
4. Select "Install From Storage"
5. Select Universal Safetynet Fix
6. Wait for Flashing to complete
7. Reboot
F - Test Safetynet
1. Install YASNAC
2. Grant Super User rights
3. Select "Run Safetynet Attestation"
If both checks pass, you successfully have passed Safetynet!
PlasmaTornado said:
Please note, the TWRP image used IS NOT the official TWRP image.
I am not responsible for any any harm, such as bricking, or bootloops, which may happen to your device. This is what worked for me.
Prerequisites
Unlocked Bootloader
Magisk 25.2 Installation ZIP (see attached files)
TWRP Image (download from GDrive)
ADB and Fastboot tools are installed on your machine. Please see this guide
Step 1 - Unlocking Bootloader:
1.A - Enable OEM Unlocking:
1. Open Settings -> About -> Tap on Build Number 7 times
2. Open Developer Settings
3. Enable OEM Unlocking
4. Enable Android Debugging Bridge (ADB)
1.B - Entering Bootloader
The bootloader must be unlocked in order to flash the recovery.
Ensure the device is connected to the computer via ADB by entering the following command
Code:
adb devices
The output should be something similar to this:
View attachment 5792895
(note the device name on the left will not be the same)
Reboot into the bootloader by entering the following command:
Code:
adb reboot bootloader
1.C - Unlock
Once entered, enter the following command:
Code:
fastboot oem unlock
WARNING: THIS WILL WIPE ALL DATA ON THE DEVICE
Then finally:
Code:
fastboot reboot
You will now have to go through the device setup.
Repeat steps 1.A and 1.B to enter back into the bootloader
Step 2 - Flashing TWRP Image:
2.A - Entering Bootloader
Repeat steps 1.A and 1.B to re-enter the bootloader
2.B - Flashing TWRP:
Again, this IS NOT the official TWRP image. I am not responsible for any harm which this may cause to this device. That being said, it appears to be functional.
The image used is from a leak found on this XDA post
! It is HIGHLY recommended that you boot into the twrp.img before flashing to ensure that TWRPworks . I did not, but I recommend you do. !
To test this, enter the following command:
Code:
fastboot boot twrp.img
Enter the following commands to flash the TWRP image:
Code:
fastboot flash recovery_a twrp.image
Code:
fastboot flash recovery_b twrp.image
Code:
fastboot reboot recovery
You should notice you are in TWRP.
You may need to change the language to English.
2.C - Changing TWRP Language:
1. Tap on the button on the Second column, Third Row
2. Tap on the World icon
3. Select your language
4. Tap on the button on the bottom right corner of your display.
2.D - Booting into your phone
1. Select Reboot
2. Select System
You should now have successfully booted in the system with TWRP installed as your recovery
Step 3 - Flashing Magisk:
3.A Preparing the Device:
1. Move the Magisk-v25-2.zip to your device
2. Reboot into your recovery / TWRP
This can be done by entering the following ADB command:
Code:
adb reboot recovery
3.B - Flashing Magisk:
1. Tap Install
2. Select the Magisk-v25-2.zip
3. Swipe to flash (this may take some time)
4. Tap Reboot
You should now enter the device
3.C - Installing Magisk APK
If for some reason the Magisk Installer did not install the Magisk APK, click here to download the APK.
Install the APK, and you should have root!
Click to expand...
Click to collapse
Good post but one problem...to unlock is " fastboot flashing unlock"
Canuck Knarf said:
Good post but one problem...to unlock is " fastboot flashing unlock"
Click to expand...
Click to collapse
Of course! Thank you, used to the old way of unlocking
I wonder about any major issues with this TWRP as of now. Updating ZIP OOS13 with flashing magisk direclty is working etc.?
kouzelnik3 said:
I wonder about any major issues with this TWRP as of now. Updating ZIP OOS13 with flashing magisk direclty is working etc.?
Click to expand...
Click to collapse
Following the method created by @dladz should still work perfectly fine!
There could still be issues with this TWRP as this is not an official image.
AFAIK Switching ROM is still untested, but decryption, backups and flashing are all confirmed working, which for me makes me feel significantly more comfortable
I won't switch ROMs as there aren't any, so this is ok. I was just asking if installing official OOS updates can be done via twrp now with flashing magisk right after for example.
But I glad decryption, backups and flashing zips working fine now. This is great news!
kouzelnik3 said:
I won't switch ROMs as there aren't any, so this is ok. I was just asking if installing official OOS updates can be done via twrp now with flashing magisk right after for example.
But I glad decryption, backups and flashing zips working fine now. This is great news!
Click to expand...
Click to collapse
This has yet to be tested but I have high hopes! If anyone could confirm in the near future it would be fantastic!
PlasmaTornado said:
This has yet to be tested but I have high hopes! If anyone could confirm in the near future it would be fantastic!
Click to expand...
Click to collapse
I will try factory wipe...flash flash from 2213...to 2215...might work
Canuck Knarf said:
I will try factory wipe...flash flash from 2213...to 2215...might work
Click to expand...
Click to collapse
Fantastic news. Let us know the results!
i wouldnt advise ANYONE with an original TMOBILE device, ANY attempt to flash ANY firmware from the official builds just yet. Tmobile embedded a VERY WELL HIDDEN check into the EFS partition that only appeared in builds after 11_A.14 ... This check forcefully activates a lock triggered by the CarrierDevicePolicy.xml in the efs system... and if the Region and model does not match the original build that it came with, all of your apps will be completely disabled and there is nothing accessible but the settings button. It also disables ADB/USB debugging completely, and deauthorizes your computer from the adb wireless keys too... then it removes the USB DEBUGGING toggle from settings, followed by a persistent message that your phone is "Violating Contract Policy... Please contact after sales for support" ... Tmobile cannot remove this warning... and even them sending an UNLOCK request to your phone for APPROVED will get ignored by your phone. You can hear ringing, but cannot accept calls... hear emails but not open them,.. and you dialer is in emergency calls only!...
At this point you will think panic is the only option, but instead just Pull your sim card, and use your buttons to force reboot and enter recovery .... Then do a Format Data ,,,, followed by a reboot, but do not put your sim back in... Until you go thru the whole setup wizard, enable usb debugging, and then flash a rollback package to a fw earlier than the one i listed above, your phone will INSTANTLY lock again any time you insert ANY sim card.
Im very sure that there is a system process that can be disabled which will at least block the lockout.... but i dont have that knowledge as to which process(es) are calling it! A logcat generated about 15 screens on my computer as soon as i plugged a sim in... so that was too much for me to sift thru. This is present on both the 10 Pro and 10 T so be warned.... If you are already not using your original T-MO firmware, but you also have been loading other regions with no problem, that does not matter.... I have found an exact reference to the ORIGINAL FW build and Model # that was loaded by TMO at the factory level, in several different TXT and XML files inside the EFS part. AND my 10T and 10 Pro BOTH have been fully bricked, then formatted and flashed thru an authorized MSM Account.... Doing an ERASE ENTIRE FILE SYSTEM, thru msm, did not get rid of this file, so i doubt a twrp level wipe will do it either... MAYBE an "unlock Critical" in Fastboot, followed by a "Fastboot wipe", "DM-verity disable", and "VB-Meta erasure" MIGHT take out this crazy security system, but i know this .... if you flash an original FW using TWRP, it has protections in it to keep IT (twrp) from being overwritten, so you might find yourself in bootloop territory if you region hop.... cuz the fw might notice the changes to the partitions... For now, until someone is brave enough to challenge the Android 12 kernel and remove these trapdoors, I would just be happy you have TWRP, and wait for the person who finds and slays the Tmobile Dragon hidden in our phones! But this is truly an android 12 function that was put in place for Carrier and Manufacturer benefit ONLY. Another strike against 1+
beatbreakee said:
i wouldnt advise ANYONE with an original TMOBILE device, ANY attempt to flash ANY firmware from the official builds just yet. Tmobile embedded a VERY WELL HIDDEN check into the EFS partition that only appeared in builds after 11_A.14 ... This check forcefully activates a lock triggered by the CarrierDevicePolicy.xml in the efs system... and if the Region and model does not match the original build that it came with, all of your apps will be completely disabled and there is nothing accessible but the settings button. It also disables ADB/USB debugging completely, and deauthorizes your computer from the adb wireless keys too... then it removes the USB DEBUGGING toggle from settings, followed by a persistent message that your phone is "Violating Contract Policy... Please contact after sales for support" ... Tmobile cannot remove this warning... and even them sending an UNLOCK request to your phone for APPROVED will get ignored by your phone. You can hear ringing, but cannot accept calls... hear emails but not open them,.. and you dialer is in emergency calls only!...
At this point you will think panic is the only option, but instead just Pull your sim card, and use your buttons to force reboot and enter recovery .... Then do a Format Data ,,,, followed by a reboot, but do not put your sim back in... Until you go thru the whole setup wizard, enable usb debugging, and then flash a rollback package to a fw earlier than the one i listed above, your phone will INSTANTLY lock again any time you insert ANY sim card.
Im very sure that there is a system process that can be disabled which will at least block the lockout.... but i dont have that knowledge as to which process(es) are calling it! A logcat generated about 15 screens on my computer as soon as i plugged a sim in... so that was too much for me to sift thru. This is present on both the 10 Pro and 10 T so be warned.... If you are already not using your original T-MO firmware, but you also have been loading other regions with no problem, that does not matter.... I have found an exact reference to the ORIGINAL FW build and Model # that was loaded by TMO at the factory level, in several different TXT and XML files inside the EFS part. So this is truly an android 12 function that was put in place for Carrier benefit ONLY. Another strike against 1+
Click to expand...
Click to collapse
Absolutely despicable and such an anti-consumer technique.
This stands against everything OnePlus was. It's sad to see OnePlus turn into such an anti-developer phone
A Carrier should never have this much power over a device. It is absurd
heres a google drive link to my account if anyone wants to see a video of what you will go thru if triggered!
feel free to share or re-upload the link/video to anywhere... ppl need to know this is happening thanks to Tmobile and Oneplus collaboration. I have not seen any reference to another carrier inside any of the device policy files, and my phone was restored to a NON TMO branded build of android 12 for the 2217 NA model, so it should NOT have even recognized the TMO policies cuz i even used a new sim card after the MSM Unbrick, and it still instantly locked in less than a second of plugging it in... heres the vid
https://drive.google.com/file/d/17H6YpGrUCe1Y7PoFji4gperdpTHNX5AI/view?usp=sharing
also everyone should know, that EVERY fw on the internet no matter whether it is labeled, 2213, or 2215... 2217, as well as 2413-2419 ALL have EVERY other model's manifest built in and all of the restrictions / bloatware that each region comes with, saved into the OFP extracted files.... so there really is nothing that expressly was bricking your phones by simply flashing a different labeled FW..... the brick came from the manifest reading the region identifiers that the manifests are labeled under.... it is a file that is again picked by some random hidden check inside the TMO EFS, and as soon as your phone tries to boot the newly flashed FW, the TMO Lock is what bricks your phone, to either a bootloop state, or if you continue to force a flash by using Fastboot , you will have a non responsive phone, thanks to this stupid security issue. If unresponsive, the only way out is MSM Tool... and i can help you locate your test points if your buttons dont work.
I cannot publicly post a picture nor a description of where the test points lie inside the 10T , because i already got a cease and desist letter from BBK and i dont know if they have said anything to the mods here about posting Undisclosed hardware access points.... but ive been a member here almost 10 years, and i aint risking a ban from a tattle tale company! There are test points on the 10 t though,.. just well hidden!
The 2nd pic is of the 2217 Unpacked OFP , yet the build prop shows a 2210-2211 base in one and a 2413-2415 base in the.... with NO 2217 in either prop,or manifest file, yet when my phone was flashed back from Brick status, THIS is the FW that was used, and my phone identifies as a 2217 NA now..... can oneplus be any more clear that they have completely turned against us, by straight SHOWING US that they are being super cryptic and sneaky in something as common as the BUILD.PROP files?!?
The weird thing happened to me. I was doing "fastboot boot twrp.img" and adb gave me an error "Too many links" and the device only shows a OP logo for a half second, then turned off and then again repetatively.
Even if I turned off the device by holding power button + volume up + volume down, then turned on, same behavior happened.
Well, my fastboot was accessible so I did "fastboot boot boot.img" which worked and system booted up. But what happened, what might been wrong?
kouzelnik3 said:
The weird thing happened to me. I was doing "fastboot boot twrp.img" and adb gave me an error "Too many links" and the device only shows a OP logo for a half second, then turned off and then again repetatively.
Even if I turned off the device by holding power button + volume up + volume down, then turned on, same behavior happened.
Well, my fastboot was accessible so I did "fastboot boot boot.img" which worked and system booted up. But what happened, what might been wrong?
Click to expand...
Click to collapse
It could been...cause you might of had to many things open containing the same file...plus you might want to try the command ( fastboot flash recovery_a )....then ( fastboot flash recovery_b )
Canuck Knarf said:
It could been...cause you might of had to many things open containing the same file...plus you might want to try the command ( fastboot flash recovery_a )....then ( fastboot flash recovery_b )
Click to expand...
Click to collapse
Oh. I had opened like two or three folders containing that file, yes. But this can cause it? Wow. And I wanted to try to boot it first instead of flashing it.
kouzelnik3 said:
Oh. I had opened like two or three folders containing that file, yes. But this can cause it? Wow. And I wanted to try to boot it first instead of flashing it.
Click to expand...
Click to collapse
Yeah i hear you but I'm not sure if this a bootable version or a just install version....I will try it on mine to see if i get the same as you
Don't use command "fastboot boot twrp.img"....your phone will keep rebooting to op logo...but fastboot still works
Canuck Knarf said:
Don't use command "fastboot boot twrp.img"....your phone will keep rebooting to op logo...but fastboot still works
Click to expand...
Click to collapse
Yeah, I realised that, this happened to me. Thanks to fastboot I was able to boot into stock boot image, so nothign really happened, but hey. So if I dont want to flash it but only try it, what willl be the command? Fastboot boot recovery twrp.img?
kouzelnik3 said:
Yeah, I realised that, this happened to me. Thanks to fastboot I was able to boot into stock boot image, so nothign really happened, but hey. So if I dont want to flash it but only try it, what willl be the command? Fastboot boot recovery twrp.img?
Click to expand...
Click to collapse
It appears the image is not bootable. As stated, this is the one thing I didn't try.
I have amended the guide. Thank you