Mod edit: link removed (4pda links not allowed)
Booroondook has first done FUSE ROM and now there is he again... Bravo! Many, many improvements and fixes. Sorry he is not paying attention to XDA (doing all really for free, not for donations here) but he deserves all credits.
Full Post translation and download link
Here is the full post with download link, please donate to the dev if you like his work.
The firmware is designed as a "designer" under both options screen resolutions (800x480 and 1024x600). Everyone can afford to assemble his own version. How to assemble the firmware is described in detail here:
The order of assembly of the firmware
The firmware is available as a set designer or "do it yourself" - as anyone this thing called - and is a set of modules for self-assembly of the finished image of the firmware. The assembly is made on a computer running Windows (versions from XP and higher).
How to assemble:
1) Download the archive unpack into any empty folder on your computer (the full path to the folder does not contain spaces, non-Latin characters, punctuation marks and special characters, so not recommended for unpacking on the desktop, in the "My Documents", etc. )
2) turn in this same folder
3) Run start_rus.bat file (or start_eng.bat, if you are dearer to the English interface)
4) you will be asked to choose a processor. Only two options - RK3066 and RK3188. The selection is made by entering the numbers specified opposite processor type, and then pressing the Enter key
5) The following sentence - to select the screen resolution. Options are also two - 800x480 and 1024x600. The selection is made in the same manner as in the previous paragraph
6) After this, the firmware build process, which takes less than 10 seconds.
7) The result of the process - file update_ <vash_protsessor> _ <vashe_razreshenie> .img, which, after renaming update.img you can sew in a familiar way radio When you first start after flashing is (as usual in my firmware) conducted preset application and then fit /system/build.prop configuration file under the processor type and resolution (800x480 for the recorder will be installed screen density of 160 to 1024x600 - 240). Then reboot, after which the tape recorder will be completely ready for operation.
Features flashing process. Due to the fact that changing breakdown flash memory sections (including as compared with previously released on FUSE-firmware Android 4.4.4), the process can be performed in two stages, both stages are the same.
That is, you normally install firmware mode rekaveri (thus necessarily choosing the option with full data cleaning). The device is rebooted and ... hang on animated screensaver. If you want to wait, wait - but the result is not guaranteed. If you do not want to wait, press the RESET, then (without releasing RESET'a) - POWER. Without releasing the POWER, release the RESET, waiting 3 seconds and release POWER. All - a few seconds later we are back in rekaveri mode where once again just repeat the flashing process - again, choose the menu item, involves the installation of firmware and data cleaning, and ... forward. After the second cassette recorder firmware to be released to the operating mode (although longer than usual, as is the formation of the primary file system).
Option: instead of the second flashing, you can try to select a lower menu item - "clean and reset to factory condition."
As you understand, all your data will be lost after flashing, so advance reservations and they do not say I did not warn.
Attention!!! Those who do not have the RESET button and mechanical buttons. Before flashing be sure to ask if you can overload the radio in rekaveri mode from the "hung" or off state. If this method is not, then you better not reflash.
OTA-upgrade
The firmware is the possibility of prompt automatic updates. OTA (Over the Air - "air") or FOTA (Firmware Over the Air) - a technology that allows to (semi-) automatically obtain and install the update packages. User Intervention here minimum - it is only necessary to press the button, confirming compliance with the installation. Well, there is still a button manually check for updates. And all the rest State makes self - sends a request to the server, downloads the update package, checks it for validity (verifies the certificate used to sign the update package with a key available in the firmware), reloads the State in rekaveri mode where automatically launches the update process, and finally PG reboots to the operating mode.
Naturally, for the possibility of State OTA-update should have a working Internet connection. Automatic prompting to check for updates are sent automatically after every download SI operating mode and communication with the Internet. If desired, you can request a renewal of the "out of order" by pressing the appropriate button in the dialog "Settings" - "About your device" - "OTA update system." Another essential requirement to enable OTA updates - is the availability of free space on the "GPS-card" (/ mnt / external_sd), and (of course) the availability and serviceability of the card itself. In case of problems with the card update can be downloaded to start, but then will be a network error. Available space on the card must be two times larger than the size of the update package. As practice shows, the usual pack "weighing" of up to 20 MB. Although there are cases of 55-MB blocks. In general, if you keep on the card 120 MB of free space, the problems you should not be.
Cancellation OTA update? Unfortunately, a simple interactive option is not provided. But you can do the following: Open the file for editing /system/build.prop. Find it (towards the end of the file) option ro.product.ota.host = www.booroondook.ru: 2300. Replace the URL-address of the update server (www.booroondook.ru:2300) to something "obscene". For example, suppose that this line will look like this: ro.product.ota.host = localhost. Save the file, restart the SU. Everything - Updates you will not torture any more.
Disclaimer: The self-fulfilling complicated technical procedure for flashing the device, you will definitely take full responsibility for possible negative consequences up to the irrevocable failure of your head unit.
Version - from 06/03/2016
Link to the firmware (made on the basis of KLD-20160511): https://mega.nz/#!XFZUQKAI!H2L7gsRIuVn1D7x7slQjE_XclmVP6RWXRp-VRmc5-uU
Innovations regarding the factory options:
- Cloning a resolution of 800x480 by kernel patch (kernel.img)
- Completely redesigned Russian translation
- Root access running SuperSU
- 5 launcher to choose from ( "Settings" - "Desktop")
- 4 options "Bluetooth" application ( "Telephone"), 5 application options, "Music" and "Radio". Alternative applications are installed through the "OEM" application, return to the original (nominal) version - after the usual removal of the application settings ( "Uninstall updates")
- In settings Added "For Developers", "Screen" - "Font size" and "Display" - "Display Density"
- In settings added to the monitoring data
- OTA-update functionality
- Added missing "OEM" applications, "Weather", "DVR" (Annex "Weather" - in the version revised respected vitarkananda)
- Added widgets "Weather", "Music", "Telephone", "Video" and "Navigation", ported from the firmware for MTCD
- Partition "OEM" is increased to 384 MB. This section can be used, for example, as a "warehouse" APK-relevant distributions
- Built-in support for working with trip computer Multitronics MPC-800 (Bluetooth-name DUAL-SPP)
Attention:
1) please do not ask questions why this firmware does not work Xposed. The answer is - it does not work and on the drive firmware, and generally have Xposed big problem with Android 5 (or higher). When someone finds a way to get to work on our Xposed firmware, in principle, I immediately implement it in its firmware.
2) Management of screensaver (MTCScreenClock.apk) is only possible through /system/build.prop File Edit (parameters ro.product.screenclock = true | false and ro.product.screentimeout = 5 | 10 | 15 | 20 | 30 | 60 ). Interactive control timeout in the factory firmware is not provided, and I realize it too failed.
Note: Because an application "Weather" uses a revised version of vitarkananda, the new version of the application (as they become available) can be installed instead of the usual simple by replacing labor-intensive system file.
For developers, the public certificate signed APK following: MTCBlueTooth.apk, MTCMusic.apk, MTCRadio.apk, MTCScreenClock.apk. This means that signing their "swing" application to the same certificate (and increasing code version), you can give users the ability to easily install your development instead of forcing them to carry out the replacement of system files with setting permissions.
https://mega.nz/#!XFZUQKAI!H2L7gsRIuVn1D7x7slQjE_XclmVP6RWXRp-VRmc5-uU
[size=+1]Thread cleaned.
Keep the drama out of the public forum. If you're not a moderator you have no place telling other members how to post, no matter which side of the argument you're on, use the report feature and let us deal with it. If you have a problem with a certain member/developer do not create drama in the public forum, again, use the report feature. If it isn't a reportable offence then just leave it alone or take it elsewhere. If you believe there is a developer that is stealing someone's work and/or not giving credit, you guessed it... use the report feature. See the theme here? XDA isn't the place for your petty squabbling, if you have a valid case to argue then take the right approach and call on the moderation team. And I'll repeat, keep this drama out of the public forum. This goes for both of you.[/size]
Heisenberg said:
[size=+1]Thread cleaned.
Keep the drama out of the public forum. If you're not a moderator you have no place telling other members how to post, no matter which side of the argument you're on, use the report feature and let us deal with it. If you have a problem with a certain member/developer do not create drama in the public forum, again, use the report feature. If it isn't a reportable offence then just leave it alone or take it elsewhere. If you believe there is a developer that is stealing someone's work and/or not giving credit, you guessed it... use the report feature. See the theme here? XDA isn't the place for your petty squabbling, if you have a valid case to argue then take the right approach and call on the moderation team. And I'll repeat, keep this drama out of the public forum. This goes for both of you.[/size]
Click to expand...
Click to collapse
Your "cleaning" means no one has a clue what on earth has gone on and what all the "drama" was, as there appears to be just 2 posts left, one a quote from booroondook on xda.
It would probably be best if you removed the text from your post, or simply put "Moderator cleaned thread" or something, - currently your post confuses everyone as youve removed text and/or posts, so no one knows what you are talking about.
Since when are 4pda.ru links not allowed ? I have used them and seen them used many times over the past 2 years, or is that just referring to their use in thread titles ?
typos1 said:
Your "cleaning" means no one has a clue what on earth has gone on and what all the "drama" was, as there appears to be just 2 posts left, one a quote from booroondook on xda. If you'd like to become a moderator please feel free to make an application but until then please leave it to us. If you'd like to become a moderator feel free to make an application but until then please leave it to us. If you'd like to become a moderator feel free to make an application but until then please leave it to us.
It would probably be best if you removed the text from your post, or simply put "Moderator cleaned thread" or something, - currently your post confuses everyone as youve removed text and/or posts, so no one knows what you are talking about.
Since when are 4pda.ru links not allowed ? I have used them and seen them used many times over the past 2 years, or is that just referring to their use in thread titles ?
Click to expand...
Click to collapse
You're not meant to have a clue what's going on, that's the entire point of cleaning a thread, to remove inappropriate posts so they cannot be seen. I'm not sure why this even matters to you, you weren't involved, it isn't your business, and this thread is now back to its original purpose. Thanks for your input, but no, I won't be editing my message, it was left for a reason.
4pda links aren't allowed on XDA and haven't been for quite some time. If you are using them I suggest you stop because it could affect you negatively. We can't get to every link on this site, we act on reports made by our members, when we receive a report about disallowed links (or stumble across them) they are removed.
If you'd like to become a moderator feel free to make an application but until then please leave it to us, thanks.
Heisenberg said:
You're not meant to have a clue what's going on, that's the entire point of cleaning a thread, to remove inappropriate posts so they cannot be seen. I'm not sure why this even matters to you, you weren't involved, it isn't your business, and this thread is now back to its original purpose. Thanks for your input, but no, I won't be editing my message, it was left for a reason.
4pda links aren't allowed on XDA and haven't been for quite some time. If you are using them I suggest you stop because it could affect you negatively. We can't get to every link on this site, we act on reports made by our members, when we receive a report about disallowed links (or stumble across them) they are removed.
If you'd like to become a moderator feel free to make an application but until then please leave it to us, thanks.
Click to expand...
Click to collapse
Why 4pda links are not allowed? Where we can find list of prohibited sites?
pa.ko said:
Why 4pda links are not allowed? Where we can find list of prohibited sites?
Click to expand...
Click to collapse
The main reason is because 4pda is rife with piracy, warez, and there are major issues with GPL compliance on that site. You're also not meant to direct members to competing forums.
Thanks for explanation. True. But they also have original work like this...
pa.ko said:
Thanks for explanation. True. But they also have original work like this...
Click to expand...
Click to collapse
There is no way for you or I to know if that work is actually original. 4pda is notorious for kanging. On the surface it looks like original work but no way to prove that. This is beside the point though; 4pda is blacklisted for all of the rotten crap that takes place there, it's that crap that pulls down any original work that might be posted.
tried...not working
went to build for rk3066 pressed 1 then enter got error message..."sorry RK3066 CPU does not support in this firmware" just thought i would let others know
WECoyote633 said:
went to build for rk3066 pressed 1 then enter got error message..."sorry RK3066 CPU does not support in this firmware" just thought i would let others know
Click to expand...
Click to collapse
Your a dev and youre trying to make a RK3066 ROM ? Or youve just tried to install it on an RK3066 unit ?
typos1 said:
Your a dev and youre trying to make a RK3066 ROM ? Or youve just tried to install it on an RK3066 unit ?
Click to expand...
Click to collapse
not a developer...followed instructions in first post got error with the first step
WECoyote633 said:
not a developer...followed instructions in first post got error with the first step
Click to expand...
Click to collapse
This ROM is not compatible with 3066.
The build.bat is from a previous version.
miffymiffy said:
This ROM is not compatible with 3066.
The build.bat is from a previous version.
Click to expand...
Click to collapse
thx for info..that being the case this info might be mentioned in the first post....and the diy package perhaps shouldn't give the option to choose between the 3066 and the 3188..will continue to wait for a possible rk3066 version of 5.1.1....thx again
WECoyote633 said:
thx for info..that being the case this info might be mentioned in the first post....and the diy package perhaps shouldn't give the option to choose between the 3066 and the 3188..will continue to wait for a possible rk3066 version of 5.1.1....thx again
Click to expand...
Click to collapse
It is mentioned in the Lollipop thread and I think the original thread for booroondook's ROM, which is still open, this thread is kinda superfluous really.
I have a screen for avelo toyota
Puild number rk3188-eng4.4.4 310 ....
Android 4.4.4
MCU version
Mtcb-ksp-v2.86
I would like to update it to 5.1
Is the a suitable version for me ? Because most of the versions i found are mtcb-kdl
Is this version ok with me.? Does it effect my screen ?
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
My problem is my device is 4.4.4 I would like to update to 5.1.1 and my device type is mtcb ksp
I didn't find an update please tell me how to update it
mr-mo7ammad said:
I have a screen for avelo toyota
Puild number rk3188-eng4.4.4 310 ....
Android 4.4.4
MCU version
Mtcb-ksp-v2.86
I would like to update it to 5.1
Is the a suitable version for me ? Because most of the versions i found are mtcb-kdl
Is this version ok with me.? Does it effect my screen ?
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
My problem is my device is 4.4.4 I would like to update to 5.1.1 and my device type is mtcb ksp
I didn't find an update please tell me how to update it
Click to expand...
Click to collapse
Answered 10 times already!
MCU is not important, you already have MTCB unit so you can flash MTCB roms (4.4.4. or 5.1.1.)
you are probably afraid because of ksp-v2.86, that does not matter so you can flash any MTCB based rom.
mr-mo7ammad said:
I have a screen for avelo toyota
Puild number rk3188-eng4.4.4 310 ....
Android 4.4.4
MCU version
Mtcb-ksp-v2.86
I would like to update it to 5.1
Is the a suitable version for me ? Because most of the versions i found are mtcb-kdl
Is this version ok with me.? Does it effect my screen ?
---------- Post added at 04:22 AM ---------- Previous post was at 04:21 AM ----------
My problem is my device is 4.4.4 I would like to update to 5.1.1 and my device type is mtcb ksp
I didn't find an update please tell me how to update it
Click to expand...
Click to collapse
Would probably be a good idea if you read the wiki before posting.
Does anyone know how modifing exception apks for MTCScreenClock? After I modified Build.prop to activate the Screenclock, it only works when radio apk, music apk,... are working and I'd like it works always except when I'm using GPS navigator.
By the other hand, I'd like to change transparent background for MTCScreenclock and I know that the installed MTCScreeclock.apk is not the issue because I used the same and it wasn't transparent in KitKat versions. Thank you
I have got installed in my headunit last LP version of DSA (5.1.1.).
Hi experts,
this is Abdullah here from Pakistan. I need your help, I've "sm-M205F/DS" and I want to change its IMEI number (without root) is there any way?
Because i want to keep it non-rooted.
Thanks in advance.
IMEI repair tools will do the job without root and loss of data. Just keep in mind that you shouldn't update the binary of your device or you'll end up with a modem version that's not supported by most of the tools as of yet.
AbdullahZubair said:
Hi experts,
this is Abdullah here from Pakistan. I need your help, I've "sm-M205F/DS" and I want to change its IMEI number (without root) is there any way?
Because i want to keep it non-rooted.
Thanks in advance.
Click to expand...
Click to collapse
@AbdullahZubair Thread closed!
Change of IMEI is illegal in quite a lot of countries, and in turn we don't allow discussion about or support for changing or editing of IMEI's.
XDA Forum Rules (excerpt):
...
9. Don't get us into trouble.
Don't post copyrighted materials or do other things which will obviously lead to legal trouble. If you wouldn't do it on your own homepage, you probably shouldn't do it here either. This does not mean that we agree with everything that the software piracy lobby try to impose on us. It simply means that you cannot break any laws here, since we'll end up dealing with the legal hassle caused by you. Please use common sense: respect the forum, its users and those that write great code.
...
Click to expand...
Click to collapse
I hope you understand and accept our stance.
Stay safe and stay healthy!
Regards
Oswald Boelcke
Senior Moderator
Hi members - I have one of these phones that I have been trying to ROOT - it's one of the fake versions out of China (via Wish.com) that claims to have Android 10 (and a bunch of other stuff) but is actually only running 5.1
I wanted to try and ROOT it to see if I can actually load Android 10 on it (adb sideload) but cannot get ROOT level permissions.
Happy to provide any resources from logs to backup files from the phone - can you advise me what the best steps are?
B
BruizerBG said:
Hi members - I have one of these phones that I have been trying to ROOT - it's one of the fake versions out of China (via Wish.com) that claims to have Android 10 (and a bunch of other stuff) but is actually only running 5.1
I wanted to try and ROOT it to see if I can actually load Android 10 on it (adb sideload) but cannot get ROOT level permissions.
Happy to provide any resources from logs to backup files from the phone - can you advise me what the best steps are?
B
Click to expand...
Click to collapse
you're out of luck mate.
1. is it huawei phone?
2. this Huawei section of the forum is dead
grand_deluxe said:
you're out of luck mate.
1. is it huawei phone?
2. this Huawei section of the forum is dead
Click to expand...
Click to collapse
1. No Huawei branding on it at all so it is hard to say.
2. Bummer, it was worth a try
1 step - make a backup
How to use Wwr MTK + SP Flash tool to backup Mediatek rom
This is a step-by-step guide on how to use Wwr MTK tool & SP flash tool to backup Mediatek (MTK) firmware. We had previously created guides on how to backup or dump firmware from a Mediatek (MTK) devi
forum.hovatek.com
and give me the uploadlink for this backup (zip rar) on google disk
SP Flash Tool Download All versions for MediaTek Devices
SP Flash tool download is the best application to flash Stock firmware, Custom recovery and fix some extreme issues on MediaTek Android smartphones. Download SP Flash tool all versions from our official download page.
spflashtool.com
2step - I make TWRP with the kernel from backup, you install it to recovery partition and flash Magisk-v20.4.zip
That's all you need, install MagiskManager-v8.0.4.apk and you can work with ROOT
Magisk - The Magic Mask for Android
Welcome to the Magisk Release / Announcement thread! For all up-to-date info and links, please directly check Magisk's GitHub Page Installation Download count of previously XDA hosted files: 25,490,945 v1: 8746 v2: 2251 v3: 3790 v4...
forum.xda-developers.com
---------------------------------
2 Examples are here
1) 1014x480 TWRP-P40proPL.img
Google Drive - Virus scan warning
drive.google.com
alps P40 Pro+ Specification
Technical Specification of alps P40 Pro+, auto-generated by SpecDevice application. Actual hardware list.
specdevice.com
2) 960x480 TWRP-p40.img
BruizerBG said:
it's one of the fake versions out of China (via Wish.com) that claims to have Android 10 (and a bunch of other stuff) but is actually only running 5.1
Click to expand...
Click to collapse
Your ROM is 8GB // kernel Linux version 3.10.72 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Sep 28 16:00:54 CST 2020 in boot partition// display res is 480x1014 ===on screenshot//phone has touch chip = gsl915
---------------------------------------------------
you need 3 files: scatter.txt , your preloader and TWRP-P40proPLus.img(rename it to recovery.img) .... With SPflashtool , flash the recovery in mode Download only ,!
Should be only one tick on recovery. Switch off your phone and connect to PC.... then load to recovery TWRP
{Mod edit: Link removed}
Here is a port of LineageOS 13.0/ 3.10.72 Android 6.01 (sdk 23) with your stock kernel/// I think this is optimal for your hardware
Google Drive - Virus scan warning
drive.google.com
How to install the ROM
Please backup NVRAM and IMEI with TWRP BEFORE flash! If you lose your MAC / IMEI after flash, you can restore it in 2 seconds!
First time installing the ROM
Boot into TWRP -> wipe Dalvik, Cache, System and Data -> Install the ROM ZIP
I have well bought one of these p40 clones and odds aren't in our favor. I am attaching 2 images that show one in black is what i thought i purchased whem actually i bought what is in the spec device image.
stock is here
2.31 GB file on MEGA
mega.nz
Your ROM is 8GB // kernel Linux version 3.10.72 ([email protected]) Mon Nov 30 17:12:11 CST 2020
you need 3 files: scatter.txt , your preloader and TWRP-P40pro1Gb.img(rename it to recovery.img) .... With SPflashtool , flash the recovery in mode Download only ,!
Put on only one tick on recovery . Switch off your phone and connect to PC.... then load to recovery TWRP
https://forum.xda-developers.com/t/fake-clone-p40-pro.4454223/#post-87097023
Google Drive - Virus scan warning
drive.google.com
Here is the port of LineageOS 13.0/ 3.10.72 Android 6.01 (sdk 23) with your stock kernel/// I think this is optimal for your hardware
donor is at github
GitHub - Vgdn1942/android_device_ixion_P350
Contribute to Vgdn1942/android_device_ixion_P350 development by creating an account on GitHub.
github.com
GitHub - Vgdn1942/android_vendor_ixion_P350
Contribute to Vgdn1942/android_vendor_ixion_P350 development by creating an account on GitHub.
github.com
-
kirichen said:
ROM Anda adalah 8GB // kernel Linux versi 3.10.72 ([email protected]) (gcc versi 4.8 (GCC) ) #1 SMP PREEMPT Sen 28 Sep 16:00:54 CST 2020 di partisi boot// resolusi tampilan 480x1014 ===pada tangkapan layar//ponsel memiliki chip sentuh = gsl915
---------------------------------------------------
Anda memerlukan 3 file: scatter.txt , preloader Anda dan TWRP-P40proPLus.img (ganti namanya menjadi recovery.img) .... Dengan SPflashtool , flash pemulihan dalam mode Unduh saja,!
Seharusnya hanya satu centang pada pemulihan. Matikan ponsel Anda dan sambungkan ke PC.... lalu muat ke TWRP pemulihan
Bagaimana cara mem-flash TWRP di ......
Click to expand...
Click to collapse
sa mengikuti semua langkah dan login. namun hp saya berbeda yaitu p50 apakah bisa dengan mtk 6572
-
Moderator Announcement
Thread has been cleaned from links to needrom and 4pda!
needrom requires registration for download, as such violating rule no. 11 of the forum rules and is not accepted as filehost on XDA.
XDA Forum Rules (excerpt):
11. Don’t post with the intention of selling something.
Don’t use XDA to advertise your product or service. Proprietors of for-pay products or services, may use XDA to get feedback, provide beta access, or a free version of their product for XDA users and to offer support, but not to post with the intention of selling. This includes promoting sites similar / substantially similar to XDA-Developers.com.
Do not post press releases, announcements, links to trial software or commercial services, unless you’re posting an exclusive release for XDA-Developers.com.
Encouraging members to participate in forum activities on other phone related sites is prohibited.
Off-site downloads are permitted if the site is non-commercial and does not require registration.
Off-site downloads from sites requiring registration are NOT encouraged but may be permitted if both of the following conditions are met:
A) The site belongs to a member of XDA-Developers with at least 1500 posts and 2 years membership, who actively maintains an XDA-Developers support thread(s) / posts, related to the download.
B) The site is a relatively small, personal website without commercial advertising / links (i.e. not a competitor forum-based site with purposes and aims similar to those of XDA-Developers.com.)
Click to expand...
Click to collapse
4pda is not only another phone related website (and not at all affiliated with xda-developers) but also well known for the distribution of malware and warez. Links to 4pda are not accepted on XDA.
XDA Forum Rules (excerpt):
...
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
(...)
11. Don’t post with the intention of selling something.
Don’t use XDA to advertise your product or service. Proprietors of for-pay products or services, may use XDA to get feedback, provide beta access, or a free version of their product for XDA users and to offer support, but not to post with the intention of selling. This includes promoting sites similar / substantially similar to XDA-Developers.com.
Do not post press releases, announcements, links to trial software or commercial services, unless you’re posting an exclusive release for XDA-Developers.com.
Encouraging members to participate in forum activities on other phone related sites is prohibited.
Off-site downloads are permitted if the site is non-commercial and does not require registration.
Off-site downloads from sites requiring registration are NOT encouraged but may be permitted if both of the following conditions are met:
A) The site belongs to a member of XDA-Developers with at least 1500 posts and 2 years membership, who actively maintains an XDA-Developers support thread(s) / posts, related to the download.
B) The site is a relatively small, personal website without commercial advertising / links (i.e. not a competitor forum-based site with purposes and aims similar to those of XDA-Developers.com.)
...
Click to expand...
Click to collapse
Regards
Oswald Boelcke
Senior Moderator
-
Hello XDA Members, I have been looking for a way to root my Sony Xperia XZ2 for a long time ... Is there a guide on how I can do the whole thing? or is a custom rom a root?
I want to remove the standard apps, use Gameguardian, use all the functions of the Root Explorer and much more unfortunately, "You need root rights" keeps coming back.
I hope the information below is sufficient if you need more, I'll send more.
I hope someone of you can help me
Greetings Lord Junes
Device --------------------------------------------------------
Click to expand...
Click to collapse
Device Name : Xperia XZ2 Model : H8266 Manufacturer : Sony Device : H8266 Board : sdm845 Hardware : qcom Brand : Sony Build Fingerprint : Sony/H8266/H8266:10/52.1.A.3.137/ihopeyoudontneedthisnumberiremovedforprivacy:user/release-keys USB Host : Supported!
Click to expand...
Click to collapse
System --------------------------------------------------------
Click to expand...
Click to collapse
Android Version : 10 Version Name : Q Released Date : September 04, 2019 Code Name : Android 10 API Level : 29 Security Patch Level : 2020-11-01 Bootloader : xboot Build Number : 52.1.A.3.137 Baseband : 845-sdm845.gen.prodQ-00052-49,845-sdm845.gen.prodQ-00052-49 Java VM : 2.1.0 Kernel : 4.9.186-perf+ Language : English (en_US) OpenGL ES : 3.2 Root Management Apps : SuperSU SELinux : Unmöglich zu ermitteln! Google Play Services : 21.36.14 (ihopeyoudontneedthisnumberiremovedforprivacy:user) Vulkan : Supported (1.1) Treble : Unterstützt! Seamless Updates : Supported!
Click to expand...
Click to collapse
THREAD LOCKED
@Lord Junes GameGuardian is considered to be warez. As per Rule 6 of the Forum Rules:
6. Do not post or request warez.
If a piece of software requires you to pay to use it, then pay for it. We do not accept warez nor do we permit members to request, post, promote or describe ways in which warez, cracks, serial codes or other means of avoiding payment, can be obtained or used. This is a site of developers, i.e. the sort of people who create such software. When you cheat a software developer, you cheat us as a community.
Click to expand...
Click to collapse
Since you're new here, I recommend you read all Forum Rules before posting going forward, if you haven't already.
Regards,
shadowstep
Forum Moderator