Database Develop

Winodws Mobile 7 have we got a leaked beta test yet ?

I was just wondering has anybody come across a beta test of windows mobile 7 yet ????
if so where can i get it ?
i am just itching to get my hands on it

kevmass said:
I was just wondering has anybody come across a beta test of windows mobile 7 yet ????
if so where can i get it ?
i am just itching to get my hands on it
Click to expand...
Click to collapse
Even if someone did get their hands on it most likely the touch pro 2 would not even run it. It is not even close to the minimum requirements MS has listed for devices.
WM7 Chassis 1 Specification
Core requirements:
Processor: ARM v6+, L2 Cache, VFP, Open GL ES 2.0 graphics HW (QCOM 8k, Nvidia “Tegra” AP15/16* and TI 3430 all meet spec)
Memory: 256MB+ DRAM, 1G+ Flash (at least 512MB fast flash – 5MB/s unbuffered read @4K block size)
Display: WVGA (800×480) or FWVGA (854×480) 3.5” or greater diagonal
Touch: Multi-touch required
Battery: Sufficient to meet Days of Use LTK requirements.
Controls: Start, Back, Send and End are required (soft controls allowed as long as they are always present).
Peripherals:
Camera: 3MP+, flash optional, 2nd camera optional (VGA resolution sufficient)
GPS: aGPS required
Sensors required: Light Sensor, Compass (3 axis, 5 degrees, 100 Hz sample rate), Accelerometer (3 axis, 2mg resolution, 100 Hz sample rate)
USB: High speed required, 20 MB/s transfer rate.
BlueTooth: BT2.1 required, must run MSFT BT stack, CSR BlueCore6 or later recommended.
Wi-Fi: 802.11B/G required, must run MSFT Native Wi-Fi stack, Atheros 6002 or Broadcomm 4325 recommended.
Connectors: Micro USB and 3.5mm Audio required.
Options:
FM tuner: If tuner HW is present it will be detected and supported by the Media application.
Haptics
SD Card (Micro SD recommended)
DPAD, qwerty or 12/20 key keyboards all optional

Nope, and the latest speculation is on this thread : http://forum.xda-developers.com/showthread.php?t=554981
Ta
Dave

[Q] [request] $$ for control of my hardware! (tegrak,supercurio,chainfire come here!)

hi, i just changed my galaxy s2 for this lg p990 because i needed some money. i love this phone but current software lacks of full hardware control. for instance on sgs 2 tegrak apps and kernels provide a full customization in frequency and voltages (cpu and gpu). if you can find a lucky phone like mine was you can undervolt gpu from 1,1 to 0,75 volt at full frequency with a great battery life improvement. i love small but powerful apps like
-voodoo control
-tegrak apps
-chainfire 3d
and i paid for all of them! so i will buy also a nice app to control gpu and avp of my tegra 2 lg p990! i don t care about need of reboot or aomething, i will just watch my full hp movies on hdmi without lag or frame skip!

Hello!
What you want is available - to a certain extent.
To UV you need a OC/UV kernel to do this and you could use either one of kernels like i.e. spica(Horse Power kernel for stock rom), dr4go(fps kernel for stock), SetiroN(ironknL for CM7) or vodonka (KANG kernel for CM7).
Then use i.e. Pimp my CPU to customise under-volt over-clock...whatever...
But if it is possible to undervolt GPU independently in Tegra 2 chips - I don't know. You could ask any of the kernel devs above!?!?
Chainfire 3D is available - if you bought it just install it - it gives some performance but MSAA customisation isn't supported by the Tegra 2 - if you are looking for this...
Voodoo sound control is available and still under development - right know their are only some basic features - but it works and brings some dynamic range improvement. IMHO it is a noticeable improvement.
BTW: Watching video with full HD up to 1080p is possible out of the box - no need to OC or to OC GPU for that.

hi, thank you for your answer! i flashed cm7 and now i don't cry anymore for my ex sgs2, but a friend of mine gave me an hd file for test and it was 1080p with low bit rate ( 2,5gb for 2 hour lenght) but impossible to watch properly on my hd tv. and i was very disappointed when the encoding speed was almost the same switching beetween hw and sw decode ( on mx player). i don t think tegra 2 sucks as it seems. i manage clock speeds on my mobile with pimpmycpu but it is not very reliable and still don t have any control on gpu and avp clock. so what i think that really lacks on p990 sw
environment is a gpu/avp control. i home cm9 will bring any improvement on this side

isd88 said:
hi, thank you for your answer! i flashed cm7 and now i don't cry anymore for my ex sgs2, but a friend of mine gave me an hd file for test and it was 1080p with low bit rate ( 2,5gb for 2 hour lenght) but impossible to watch properly on my hd tv. and i was very disappointed when the encoding speed was almost the same switching beetween hw and sw decode ( on mx player). i don t think tegra 2 sucks as it seems. i manage clock speeds on my mobile with pimpmycpu but it is not very reliable and still don t have any control on gpu and avp clock. so what i think that really lacks on p990 sw
environment is a gpu/avp control. i home cm9 will bring any improvement on this side
Click to expand...
Click to collapse
The last thing i heard was that CM7 and HMDI 1080p and 720p playback didn't work 100%. on stock, that should work..

yes, it played well on stock gingerbread....not like sgs2 but something lile. dual boot on lg dual (italian name of lg 2x) could be a good idea also

Hello!
The Question is if the used codec that was used for encoding the video is supported by the hardware.
BTW: I use moboplayer, but my TV only supports 720p with this phone (don't know why - while it supports 1080p with my laptop) and I used 720p sources from OnlineTVRecorder.com for testing - this works without glitches...

Playing videos & HWA

Guys my Nook Color does not play videos flawlessly. I find no audio - video proper sync. Sometimes it slows down. How to solve this issue ?
Currently I am using Mirage 7.2 [03042012 build]
I have no idea how to overclock, so I assume I am using at stock speed. Does overclocking help this issue ?
Does my nook HWA enabled ? How to check ?
Which is best media player ? something like VLC / GOM as for PC ?
Here are the two videos I'd like my Nook Color play flawlessly :
Video 1 : http://npteldownloads.iitm.ac.in/softlinks_mp4/106102064/lec06.mp4 [source]
Video 2 : https://d19vezwu8eufl6.cloudfront.net/algo1/recoded_videos/[420f432a] about.mp4 [source]
This are free educational videos & I am not pirating.

I just ran the 11mb file you posted and it ran flawlessly. I suggest you use Mobo player for playing video files. My NC is overclocked, set on conservative from 800mhz to 1200mhz. I suggest you check out the post from mr72 in General Discussion about his setup, you don't have to do the first steps about repartitioning. Just do the last few steps about battery and performance improvements. Right now im posting from my nook so its a bit cumbersome to get the links for you. Once I get on my laptop ill edit the post.
Sent from my NookColor using Tapatalk
Edit: Ok go into mr72's guide and follow the steps from 17 - 19, this should help with your performance.

Thank you very much, I will look into it
Is overclocked needed OR it can play at 800 Mhz ?

avi! said:
Thank you very much, I will look into it
Is overclocked needed OR it can play at 800 Mhz ?
Click to expand...
Click to collapse
I would definitely overclock. It is very safe and easy and gives a significant performance boost in all areas. 1200MHz seems fine for every Nook C, some push it to 1300MHz but that can actually start to slow some graphics performance measures down. You won't significantly hit battery performance as the Governor slows the clock speed down when its not needed.
Just get one of the apps from the market like antutu CPU Master pro and set it up.

Just an app from Market can OC it ? no other flashing any zip file / kernel etc needed ?

avi! said:
Just an app from Market can OC it ? no other flashing any zip file / kernel etc needed ?
Click to expand...
Click to collapse
If you are using Mirage it already comes with overclocked kernel capabilities, just follow the instructions in mr72's guide (the link I gave you earlier).
Or just go into Settings>CyanogenMod Settings>Performance>CPU Settings:
Min CPU: 300mhz
Max CPU: 1200mhz
and voila!
But I highly recommend that you take a look into mr72's guide for undervolting these specific steppings, so you get better battery life.

on a side note, anyone able to play 720p videos?

Will my laptop run Guild Wars 2?

Hello there guys,
I'm wondering if there is any chance my Acer Aspire 5735z laptop will run GW2? It ran the original GW on the highest settings without any problems. I've checked 'CanYouRunIt' but I don't trust it as it says games like GW1 and Bioshock won't run but they do run fine. I just want to be able to play the game on the lowest settings. Here are my specs:
Pentium(R) Dual-Core CPU T4500 @ 2.30GHz
3.0 GB RAM
Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
Mobile Intel(R) 4 Series Express Chipset Family (Pixel Shader version 4.0) (Vertex Shader version 4.0) (Dedicated Video RAM 64 MB)
Thank you

Google has multiple knowledges!
http://www.systemrequirementslab.com/cyri/intro.aspx
In fairness, minimum requirements are there to cover them. If you buy a game and your PC is below their minimum requirements then you can't complain. If it's a decent PC it'll probably run though. Graphics would be the main issue, and that all depends on how much you can dumb down the graphics engine in the game.
Is there not a demo or trial version you can try to find out?

I tried CanYouRunIt but it's lied to me previously so I don't trust it. It says GW1+Bioshock won't run but they do run fine.
There's no demo or trial so I'm kinda stuck whether or not to blow £35 on something that may not work.
Thanks.

Windows® 2000/XP/Vista/7
Intel® Pentium® III 800 MHz or equivalent
512 MB RAM
CD-ROM drive (required for installation from physical editions only)
5 GB available hard disk space
ATI® Radeon® 8500 or NVIDIA® GeForce™ 3 or 4 MX Series graphics card with 32MB of VRAM
16-bit sound card
56k Internet connection
Keyboard and mouse
that's the GW2 minium requirements, judging by that then I should be able to run on lowest settings?

Use gamedebate.com
Insert witty sentence here

Prawesome said:
Use gamedebate.com
Insert witty sentence here
Click to expand...
Click to collapse
Just tried it here are my results;
CPU got a green tick - 89%
GPU got a red cross- 27%
RAM got a green tick- 75%
"This system may have troubles with Guild Wars 2. But with some clever adjustments you may be able to run it."
Do you think it'll be okay?

Real Racing 3 - so slooowww

Hello. Anyone tried real racing 3? I was expecting a lot more from a quad core + gpu 1.5x speed the Mali. Although installed it shows 'device not supported' in Google play. Maybe it has to do something with this? Any workarounds?

i also use this phone, it can play this game, if we use all core (4 core), the game run so lag but full graphic, if we only use 1 core, game run smooth but low graphic

warcraft8 said:
i also use this phone, it can play this game, if we use all core (4 core), the game run so lag but full graphic, if we only use 1 core, game run smooth but low graphic
Click to expand...
Click to collapse
What about 2-cores? What software are you using to change the core usage?

As always in better games - set governor to performance . Plays quite good

governor=??
Can someone please elaborate?

oh, you need app like SetCpu to do this.

scooterlord said:
governor=??
Can someone please elaborate?
Click to expand...
Click to collapse
governer.. the way ur cpu behaves under load and idle times..
Oppa Gangnam Bootlooder Unlock Style