This is a dump of the Att variant android Q.
In these zips youll find all that you need in order to automaticly flash, fix verity (data) , root, and install twrp.
The boot image is pre-injected with twrp and patched for magisk, however stock boot and abl are included.
1.Boot into EDL mode.
2.Install the included QPST suite and Open Qfil, select "flat build" under "build type" select the included "prog_ufs_firehose_Sdm845_lge.elf" under "select programmer"
3.In qfil click the "tools" tab --> partition manager - leave the partition manager open.
4.Open the "QFILHelper_GPT.exe" tool and choose option 5. The tool will now automaticly flash the partitions from the "flash" folder.
5.After the partitions are flashed hold vol- and power until you see the lg logo, then release and again hold down power button.
-you will be asked if you want to wipe data. use the volume button to select yes and power buttion to confirm. (this will not wipe data)
6.Once youve booted into twrp, answer no to decryption. format (not wipe) data and flash the "Disable_Dm-Verity_ForceEncrypt"
zip to disable encryption.(this will wipe data!)
Download Side A
Download side B
Related
Note :
I did it on my C9Pro SM-C900F, I don't know if it will work with another variant of C9Pro.
BACK UP YOUR PHONE BEFORE PROCEEDING.
Tested by my self and work perferctly.
Steps,
1. Boot into Download mode (Vol. Down + Home + Power), select Vol. Up to continue.
2. Connect your phone to PC & flash TWRP recovery.tar.md5 with odin. Keep pressing Vol. Up + Home while flashing, that will boot directly into recovery after reboot. Remove your phone from PC.
Note : If you already install TWRP just start the steps from no. 3
3. In recovery mode, go to backup menu and backup all partitions (choose SD card storage) then reboot to normal OS.
4. Connect your phone to PC and copy the TWRP folder from storage to PC. You will use that for recovery. Back up your data, pictures, vids etc too (if important for you). Remove your phone from PC.
5. Reboot to recovery (Vol up + Home + Power), choose wipe and format data. After format data done, in advanced wipe, format system, data, internal storage, cache, and davlik/art cache. DO NOT REBOOT.
6. Connect phone to PC, now you can see internal storage. Download & Copy :
a. no-verity-no-encrypt from https://www.androidfilehost.com/?fid=24591000424949989
b. SU from http://download.chainfire.eu/1220/SuperSU/SR5-SuperSU-v2.82-SR5-20171001224502.zip
c. Copy your TWRP folder back to phone/internal storage. Power off and Reboot to recovery (Vol up + Home + Power).
7. From restore menu install the back up from TWRP folder. Do not reboot. Then go to install, select 2 zips above and nstall. Reboot to normal OS.
8. Now you have rooted phone with decrypted twrp.
Install Xposed,
To make official Xposed working properly in your phone, you should have a deodexed ROM.
First, do step 1 and step 2 (to have TWRP).
If TWRP already instelled, reboot to recovery (Vol up + Home + Power) and flash this ROM :
https://goo.gl/GeYTRq
After flashing that ROM, continue to step 3 - 7. Then install XposedInstaller.apk, just the .apk file (no need .zip file, no need to flash from recovery). After Xposed installed, just follow the steps to install framework. Reboot, it will take some minutes.
Done.
Thanks to all xda.dev & member
Hi,
I installed mi Globe successfully on my Xiaomi Mi8 SE. Got going using my phone with no problem for almost a month.
BUT.........
I had never restarted the phone since ROM installation, today I restarted and now it goes straight to fastboot (without holding vol-)
Please someone help me!
It would be preferable not have to format my phone.
==SOLVED==
What I did:
1) Boot on TWRP
-fastboot flash recovery TWRP-1227.img
-fastboot boot TWRP-1227.img
-reboot recovery (power + vol up)
2) Sing TWRP (i guess this is optional?)
-Advanced -> sing boot
3) Do not reboot after install
-Go to setting and uncheck "Reboot after installation is complete"
4) Install same image used when you installed the system
-Click on install and select the zip the system image (don't use the "install image" button)
5) From main menu press Reboot->System
So, I was on Android 10, I was trying to root using Magisk & TWRP as mentioned in this XDA Post.
Title:: "[RECOVERY] TWRP 3.3.0 for Galaxy M20" , By DarkLord1731, Senior Member on 3rd March 2019, 08:54 AM (**mentioning because i cant post link**)
Even after multiple attempts, I was unable to install
1. no-verity-opt-encrypt 2. RMM Bypass zip using TWRP.
Both kept on failing even when i tried different versions.
-------------
Later on when i tried flashing SuperSU , phone got bootlocked
still stuck, any help would be appreciated.
-------
Installation Steps:
- First, make sure your phone isn't RMM Locked.
- Download Odin3 v3.13.1, Samsung USB Drivers, latest TWRP's tar for your variant, latest no-verity-opt-encrypt zip, latest Magisk.zip and RMM Bypass zip by Black Mesa, and copy all of them to your external sd card.
- Go to Settings App, Developer Options and enable OEM Unlock (If you don't see Developer Setings, go into About phone>Software info and tap "Build number" 10 times to show Developer Options menu).
- Do a backup of all your important data and files in your phone.
- Shutdown the phone. Once it's off, Power it On in Download Mode (Connect your phone to your PC, press and hold Power, Vol + and Vol - buttons together )
- Open Odin3, go in Option section and untick "Auto-reboot". Once that click the "AP" button and select the TWRP tar you downloaded before, then press the "Start" button.
- Once Odin3 finished to flash the recovery (you should see a "PASS" message), force reboot your phone (Press and hold Power and Vol - buttons together) and once the screen is off, press and hold Power and Vol + buttons together to boot in TWRP.
- Once TWRP is booted you first need to decrypt your /data partition. To do so touch Wipe>Format Data and follow the instructions in screen.
- Once it finished go back at the home screen and touch Reboot>Recovery. TWRP should be able to mount your data partition. Now flash the no-verity-opt-encrypt, Magisk(necessary to prevent bootloops) and RMM Bypass zip you downloaded before (touch Install and select each zip to flash it)
- You're now able to reboot to your OS without re-encrypting /data partition and without RMM Prenormal lock.
Akshay4497 said:
So, I was on Android 10, I was trying to root using Magisk & TWRP as mentioned in this XDA Post.
Title:: "[RECOVERY] TWRP 3.3.0 for Galaxy M20" , By DarkLord1731, Senior Member on 3rd March 2019, 08:54 AM (**mentioning because i cant post link**)
Even after multiple attempts, I was unable to install
1. no-verity-opt-encrypt 2. RMM Bypass zip using TWRP.
Both kept on failing even when i tried different versions.
-------------
Later on when i tried flashing SuperSU , phone got bootlocked
still stuck, any help would be appreciated.
-------
Installation Steps:
- First, make sure your phone isn't RMM Locked.
- Download Odin3 v3.13.1, Samsung USB Drivers, latest TWRP's tar for your variant, latest no-verity-opt-encrypt zip, latest Magisk.zip and RMM Bypass zip by Black Mesa, and copy all of them to your external sd card.
- Go to Settings App, Developer Options and enable OEM Unlock (If you don't see Developer Setings, go into About phone>Software info and tap "Build number" 10 times to show Developer Options menu).
- Do a backup of all your important data and files in your phone.
- Shutdown the phone. Once it's off, Power it On in Download Mode (Connect your phone to your PC, press and hold Power, Vol + and Vol - buttons together )
- Open Odin3, go in Option section and untick "Auto-reboot". Once that click the "AP" button and select the TWRP tar you downloaded before, then press the "Start" button.
- Once Odin3 finished to flash the recovery (you should see a "PASS" message), force reboot your phone (Press and hold Power and Vol - buttons together) and once the screen is off, press and hold Power and Vol + buttons together to boot in TWRP.
- Once TWRP is booted you first need to decrypt your /data partition. To do so touch Wipe>Format Data and follow the instructions in screen.
- Once it finished go back at the home screen and touch Reboot>Recovery. TWRP should be able to mount your data partition. Now flash the no-verity-opt-encrypt, Magisk(necessary to prevent bootloops) and RMM Bypass zip you downloaded before (touch Install and select each zip to flash it)
- You're now able to reboot to your OS without re-encrypting /data partition and without RMM Prenormal lock.
Click to expand...
Click to collapse
Don't touch twrp with stock rom, it is quite complicated.
Guide:
1. Download magisk manager(mm) and stock rom
(Backup data using Smart Switch on windows)
2. Copy AP file into internal storage
3. Open mm and choose install magisk
4. Choose select and patch a file
5. Patch the AP file.
6. Use Odin flash the AP file with other files(BL, CSC,...)
7. Reboot( all of ur data will be wiped)
8. Restore data
9. Enjoy
(P/s: i thought i posted last week but just found out that i didn't click post)
Try to root using Magisk to patch boot.img
it is wrking on all samsung devices even with last update of android 10.
Hello there. Hope this helps!
FIRST OF ALL, this WILL VOID your waranty. Read the steps BEFORE doing anything
ALSO PLEASE READ THE NOTES AT THE BELOW POST.
UNLOCK BOOTLOADER: It's not "easy" at all (You'll have to open your tab).
Go to device info on tab settings.
Press compilation number for several times until "you're a dev" message appears (It'll prolly ask your pattern/password to continue).
Go to dev options and enable OEM unlocking.
Shut down the tab.
Download PotatoNV sofware from here. (Credits to mashed-potatoes)
Download minimal adb and fastboot from here.
Prepare your environment:
Open your tablet
Grab a clip or a cable
Keep your cool
Follow the steps shown here. KEEP THE GENERATED CODE. This will avoid you from opening again the tablet in the case you have to do a downgrade. The way to unlock it again is writting
Code:
"fastboot oem unlock <code>"
at fastboot mode.
Here you have an image of where the testpoint is.
FLASH TWRP INTO THE TAB:
Follow CAREFULLY this steps:
Shut down the tab
Connect the tab to the PC and hold vol- & pwr button.
Now it'll appear a white screen with some text. If it appears "OEM unlock" in green, then everything's fine. IF NOT, follow unlock bootloader steps again. Then try rebooting into fastboot mode again (vol- & pwr).
Download Pretoriano80 .5 version TWRP from here.
Open Minimal ADB and Fastboot and write this:
"fastboot flash recovery_ramdisk path_of_twrp.img"
It should appear everything OK.
Type "fastboot reboot"
Fastly disconnect the tab from PC and hold vol+ & pwr button before Huawei logo appears (if it appears, just do a hard reboot (hold pwr button) and try again (just hold vol+ and pwr, no need to go back to fastboot).
You're now booting into TWRP!
RESOURCE DOWNLOAD
DOWNLOADING UNTESTED ROMS MAY LEAD TO MAJOR ERRORS
All HI6250 ROMs are "compatible" in some way, wouldn't recommend to install unless proven
A list with all tested and proven to work ROMs can be found here
Download any ROM you want from the above link. The list will be increasing with the time
Download the data decrypter from the MEGA folder (you can also find the link in the ROM list)
(OPTIONAL) you can download gapps. You can also download the version worked for me (little outdated) at the same MEGA link and update them later at the PlayStore.
(OPTIONAL) You can download Magisk from the "ZIPS" folder at the Mega link. GENERIC MAGISKS MAY (99%) NOT WORK ON THE GSIS.
PREPARATION STEPS
Boot into TWRP (vol- & pwr buttons while tab is off)
Don't make system Read Only (Just swipe the first window). This will lead you to a multiple choice menu
Head to INSTALL and select the decryter you will have in a SD card.
Swipe to confirm installation
Go again to main menu and head to WIPE and select "Format data option".
Type "yes" on the keyboard and press enter.
Then go to main menu and head to REBOOT>RECOVERY
If a message appears saying you to install TWRP app, just decline it.
Once in TWRP again, head to WIPE>ADVANCED WIPE and select dalvink/art cache, cache, data and system.
MARKING OTHER THAN THIS OPTIONS WILL LEAD TO AN IMPORTANT ERROR.
Return to main menu
THERE ARE 2 WAYS TO INSTALL A ROM:
1 -- VIA FASTBOOT:
Reboot your tab into fastboot mode (vol- & pwr buttons while connected to PC)
Open minimal adb and fastboot and type:
Code:
fastboot flash system <path_of_rom>.img
Now, wait... (Sparse header file error it's normal)
Once it has finished, type: "fastboot reboot" and disconnect from PC
2 -- VIA TWRP:
Once in TWRP head to INSTALL, press the "install image file" button.
Now head to the route where the .img file of the ROM is.
Select it, in the multiple choice menu select "SYSTEM IMAGE" and swipe to confirm installation.
Once finished, reboot to ROM or continue with the steps in order to get Google or Root working.
Flash at your own Risk !!!
Tested Working:
Flash gsi roms
How to Flash:
1. Reboot Device to Downloadmode
2. Unlock Bootloader
3. Install adb and Fastboot driver and Device Drivers ( Google will Help )
4. Download the VBMeta-disabled.tar and the twrp-3.6.0_9-0-p205.tar and the multidisable script
5. Download Odin3 from Attachments and start Odin on PC
6. In Odin Press on Options and untick Auto Reboot
7. Flash VBMeta-disabled.tar with Odin ( In Odin click on AP - select the vbmeta-disabled.tar and press start )
8. After flash vbmeta without errors press on AP and select twrp-3.6.0_9-0-p205.tar and press on start
9. If all is Flashed without errors longpress power and vol- on device
10. instantly after device goes Blackscreen press and hold power and vol+ for 5-8 seconds to boot to TWRP
11.Click Wipe in twrp ,
12.Click Advanced Wipe
13.Select the Data checkbox
14.Click Repair of Change File System
15.Click Change File System
16.Click Ext4
17.Swipt to change(Warn !!! that will wipe your data)
18.Cilck Black
19.Go back TWRP maim screen
11.Copy the multidisable script to the device
12. Run multidisabler script on TWRP via adb or TWRP TermInal
13. Reboot
The TWRP file:
Twrp_sm-p205 - Google Drive
drive.google.com
Deleted
NOTE : the twrp isn't made by me i found it at
Pledge for TWRP for Tab A with S-pen (SM-P205)?
Hi! I am relativelly new at XDA. I think i read somewhere that pledging cash for help to get a certain thing done is allowed but am a bit unsure. So excuse me if this post is perhaps slightly against the rules or so. Moderators can of course in...
forum.xda-developers.com