Hi. I'm now on stock kernel. Android 2.2 .
But if i just flsah one from they ZIP , i will got
another kernel without Flastool ?
sorry for bed english ;/
forum.xda-developers.com/showthread.php?t=1437913
Nope. The flash ZIP is just a patch to 2.2 Roms works with custom kernels.
To install a new kernel, you have to unlock bootloader and install through FlashTool, and then flash a ROM and the patch.
No. That would virtually be impossible. When you flash a Rom , you only get the Rom.you get a kernel only by flashtool. Hope it helped
Sent from my X8 using XDA App
Related
what is custom kernel ?? when it is required??is it included in custom ROM ???
so much confusion about custom kernel !!!
custom kernel is independent or dependent on bootloader ??? for to have custom rom we need custom kernel also ???
1. Custom kernel is a different base for your rom. Custom kernel requires unlocked bootloader. Custom kernel and unlocked bootloader provide some performance and capabilities benefit.
2. It depends on the type of the rom if you need or not to flash custom kernel. Many roms DO NOT REQUIRE flashing kernels, while some DO. You can find if rom requires custom kernel in the thread that the rom is posted...
Sent from my E15i using XDA App
Which rom do you want to install
Sent from my E15i using XDA App
i want to install cm7 on my x10 mini, but the device is stuck on the boot page and doesn't go ahead., plz help
tlabxit said:
i want to install cm7 on my x10 mini, but the device is stuck on the boot page and doesn't go ahead., plz help
Click to expand...
Click to collapse
Most off-topic question ever!
Use flashtool
Sent from my E15i using Tapatalk 2
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
mati96PL said:
Hey, I wanna to get back to 2.3 from MiniCM9 (nAa) and I don't know If I should first change kernel to standard, or first ROM to 2.3. Can somebody tell me?
Click to expand...
Click to collapse
First change rom to 2.3 then flash the appropriate kernel.
I don't think it really makes a difference, just that one is slightly less risky than the other.
Sent from my E15i using Tapatalk 2
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Lloir said:
Kernel then rom, if it's rom 1st then you MIGHT have to reflash the rom anyway
Click to expand...
Click to collapse
No need for reflash of rom in any circumstances... point is entering flash mode to flash correct kernel is much more doable and likelier to succeed than entering a kernel embedded recovery to flash a rom.
Hence rom first, then kernel.
Sent from my E15i using Tapatalk 2
Hmm... Who to trust?
I'm curently on nAa ICS kernel and his MiniCM9, and want to get back to Achotjan Semc Debrand Engine 2.3 with nAa 11 kernel
From my experience there is no difference at all because the kernel you wanna flash has a recovery and gives you the option to flash your rom. For example when I wanted to revert back to stock without using seus I flashed the rom first and then the kernel because if I did otherwise my device would be softbricked. I hope I made my self clear. The choice is up to you. But I like flashing the kernel first;-)
Sent from my U20i using xda premium
Ok, so I tried now with kernel first -> that doesn't work, now I'm going to check with rom first
you cant build a house without foundation! flashing the kernel first is only proper way to do this!
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
zmuhammx said:
1.put 2.3 Rom in SD
2.flash a kernel
3.on 1st boot(at kernel logo)push back button rapidly to enter cwm
4.make a full wipe and install 2.3 rom
5.done
Click to expand...
Click to collapse
exactly right~!
It doesnt mattersjust do both no matter which first
Sent from my E15i using XDA
My x8 has rooted .and Xrecovery installed .but when i try to install any stock rom. it stopped in sony ericsson logo. then i have to flash my x8 again .How can i solve this problem?
Any stock rom? What roms u installed?
Install latest baseband and try
Sent from my X8 using Tapatalk 2
Before installation check whether that rom is for stock kernal not any other kernal. U can read it from the instructions of that rom.
And fully wipe data in x-recovery before installing any custom rom.
Here are some roms compatible with stock kernal
Gingerdx v28
Kuyadroid 4.5.4
Gingerxperia
Officially corp via W8
flash latest baseband(xxxx15)
check for what kernel is the rom you want to install(if you havent unlock the bootloader, you need those that tell stock kernel)
full wipe and wipe dalvik before installation(some roms require after,see at the thread of the rom you want to install,most of the roms need before the installation)
check all requirements..
your phone baseband must be xx015 (download)
make sure your xrecovery working well
use latest kernel n ROM
I guess it is a basebrand issue flash xx015 basebrand
Sent from my E15i using xda premium
Hey Guys,
I have Galaxy note GT-N7000
android ver. : 4.0.3
I wanna know how could I update to jelly bean or at least ICS 4.4 if there is no official version of JB for Note yet,
I'm afraid that I heard that there is a problem with the Kernel or something like this in galaxy note that I can't update to newer version of andriod,
could you tell me please how to do this safely without any harm ?!!
Once you flash stock ROM for your area then you will be able to update with kies/OTA (once it released to your area)
But incase if you are on any other ROM there will be option to update with Odin.
stay tuned to XDA.
do you have a costum rom or are you planning to get a costum rom??
if that is the case you can use odin to flash a safe kernel and then flash an unofficial costum rom...search in the forum...
if you are on stock rom and you plan on staying on stock rom you will have to wait till it releases and you can download it once its released
the thing about the ICS being unsafe applies only if you're rooting or flashing a costum rom...other then that you should be fine as far as I know.
just out of curiosity why is everyone so eager to get on ics or jb??I am still on gingerbread and I don't exactly need to update...
dr.ketan said:
Once you flash stock ROM for your area then you will be able to update with kies/OTA (once it released to your area)
But incase if you are on any other ROM there will be option to update with Odin.
stay tuned to XDA.
Click to expand...
Click to collapse
Thank you
Wafi0101 said:
do you have a costum rom or are you planning to get a costum rom??
if that is the case you can use odin to flash a safe kernel and then flash an unofficial costum rom...search in the forum...
if you are on stock rom and you plan on staying on stock rom you will have to wait till it releases and you can download it once its released
the thing about the ICS being unsafe applies only if you're rooting or flashing a costum rom...other then that you should be fine as far as I know.
just out of curiosity why is everyone so eager to get on ics or jb??I am still on gingerbread and I don't exactly need to update...
Click to expand...
Click to collapse
how to get safe kernel ? and how to flash kernel and costum rom ? sorry I'm newbie :$
I rooted ICS 4.0.4 by a way I found it in XDA forum and it is rooted safely but without CWM
about why i'm eager to get ICS or JB is that some people told me that it is better for battery usage , I'm not sure !!
Easiest way is flash safe kernel (Hydracore/speedmod) with Mobile odin.
dr.ketan said:
Easiest way is flash safe kernel (Hydracore/speedmod) with Mobile odin.
Click to expand...
Click to collapse
could you please post a download link and the installation method ?!
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
dr.ketan said:
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
Click to expand...
Click to collapse
Thnx so much
but I wanna know , after I flash it , what should I do ? install new rom or it will be back again to GB or what ?! sorry that is my first time to flash anything !!
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
dr.ketan said:
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
Click to expand...
Click to collapse
thank you , can I get CWM for my phone ? because the root method I used it doesn't have CWM !!
I tried it twice , every time I select the file from mobile odin , it hangs and this message appears ( unfortunately mobile odin has stopped )
dr.ketan said:
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
Click to expand...
Click to collapse
Unfortunately. mobile ODIN has stopped.
what should I do ?!
Check you have proper root.
Find root checker from market
Install latest mobile odin
Sent from my GT-N7000 using xda premium
dr.ketan said:
Check you have proper root.
Find root checker from market
Install latest mobile odin
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Root Checker says it is rooted , I downloaded Mobile Odin v3.25 , but the same happened !!
free or pro version?
Free version seek thread on xda and follow instal instructions.
Pro version check if you have granted root rights in super user app.
edit:made little clearer
Sent with a grin (^.^)
baz77 said:
free or pro version?
Free version seek thread on xda and follow instal instructions.
Pro version check if you have granted root rights in super user app.
edit:made little clearer
Sent with a grin (^.^)
Click to expand...
Click to collapse
Thank you , now it is successfully worked
dr.ketan said:
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
Click to expand...
Click to collapse
i installed got brickbug app ,and it says : Danger this eMMC chip os known to have the brick bug !! after flashing the kernel
does that mean i still can't flash custom roms , factory reset or wipe on stock ICS 4.0.3 ?
After flashing safe kernel, you can safely wipe or hard reset.
And yes flash custom rom too, but before flashing custom rom you have to read instruction from custim rom thread op.
Sent from my GT-N7000 using xda premium
dr.ketan said:
After flashing safe kernel, you can safely wipe or hard reset.
And yes flash custom rom too, but before flashing custom rom you have to read instruction from custim rom thread op.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
is it safe to download and install roms from rommanager (CWM) ?! the rom is cyanogenmod 9.1.0 !!!
so sorry I know that i'm annoying and bothering u , but I really want to make sure that my phone will not break down !!
Hello guys! So i have got a problem, i want flash a new firmware but the user that had this phone before has allready flashed a new firmware...
It is an old 2.2 FW but i want a 4.3 FW. However what should i do now? Its rooted allready, and there is a old recovery installed(no option to flash roms)
At first you have to flash a Custom Recovery Mode. For example CWM or TWRP.
Then you can flash your Custom Rom.
Just use Google an you will find an instructions.
For the best experience you can flash it to the latest stock ROM via ODIN, install CF-Root (contains CWM too) and then upgrade to CM 10.2 with fullwipe
Just go to the forum and search cyanogenmod 10.2 from ADC team then they will provide the link to install the CWM. You can install CWM through odin (makesure u got the right odin). Follow strictly the instruction that is provided by the forum
Sent from my GT-I9001 using xda app-developers app
I think there are only Roms by the ADC-Team for the I9001 and not the I9000.
Sent from my GT-I9001 using Tapatalk 4
Here is a instruction ...step by step ...hope it can help
http://forum.xda-developers.com/showthread.php?t=2444308
DjaiGM said:
Hello guys! So i have got a problem, i want flash a new firmware but the user that had this phone before has allready flashed a new firmware...
It is an old 2.2 FW but i want a 4.3 FW. However what should i do now? Its rooted allready, and there is a old recovery installed(no option to flash roms)
Click to expand...
Click to collapse