Probably a dumb question but can we connect the NC to a fixed line (Cat 5) internet connection. Sometimes no wifi but a wire connection is available.
Of course would need some type of USB to Cat 5 connector.
Does such a thing exist?
I don't know if you'll find what you're looking for, but i'm not ruling out the option.
Meantime, if you can access a cat5 line, and you're looking at buying hardware anyway, why not get a wireless access point?
(I am curious to see if you can do what you are asking, and I don't want this thread to die on the 'get an access point' cop out)
CAT5 Ethernet? Sure, wait until B&N redesign the NOOK and do expect another inch thicker, still want it?
I have a motorhome sitting beside my house and cannot get a wifi signal so I ran a cat5 cable out there to a cradelpoint wifi unit so I now have wifi through the coach.
Sent from my NexusOne using Tapatalk
Assuming a driver is available in the kernel for the Ethernet chipset in question, you *might* be able to use something like the Wii USB-to-Ethernet adapter combined with a USB type converter. I've no idea at all what it will do to the normal network stack, but it's _theoretically_ possible.
Rodney
votinh said:
CAT5 Ethernet? Sure, wait until B&N redesign the NOOK and do expect another inch thicker, still want it?
Click to expand...
Click to collapse
Actually not really, XJack.
But seriously though, ethernet on a tablet. Heh.
Defeats the purpose of a tablet. Becomes a slablet
ikingblack said:
Defeats the purpose of a tablet. Becomes a slablet
Click to expand...
Click to collapse
I just happened to see this. That is great!
FWIW, I've seen some no-name Android tablets that have a dongle which provides USB ports and an RJ45 jack for a wired ethernet connection.. Does kinda defeat the purpose of a tablet though..
scoob8000 said:
I just happened to see this. That is great!
FWIW, I've seen some no-name Android tablets that have a dongle which provides USB ports and an RJ45 jack for a wired ethernet connection.. Does kinda defeat the purpose of a tablet though..
Click to expand...
Click to collapse
Not at all, it would be great to be able to use my Nook to configure Routers and program firmware, maybe even to use the Nook for some tethering. I would be able to finally get rid of my battery sucking, heat factory of a UMPC.
If anyone finds a way to get a usb Ethernet adapter working with the Nook please so share.
joenathane said:
Not at all, it would be great to be able to use my Nook to configure Routers and program firmware, maybe even to use the Nook for some tethering. I would be able to finally get rid of my battery sucking, heat factory of a UMPC.
If anyone finds a way to get a usb Ethernet adapter working with the Nook please so share.
Click to expand...
Click to collapse
Didn't even think about it that way.
I know they got Ubuntu running on the NC (Not sure how well). Surely there is a wired usb nic that supports Ubuntu. I'm thinking that might be the best way.
I just bought my NC, should be here in a few days. I might just have to play with this..
What about Dalingrin's Nook Tweeks app? Using 'USB Settings > USB Host Mode' can we possibly attach a USB NIC?
I have not played with the USB Host Mode just yet, but I know I got excited when I saw it
Just wanted to link to [webcam support] USB Host support that YOU can try (now in nightlies)...some interesting discussion going on over there too....
Not too sure if I understood correctly your current setup, hopefully I won't recommend you something you have already done/thought about.
For the moment, a quick an easy way would be to plug a wireless router at the end of the network cable and then setup the wireless network. You could then connect to that wireless router with your nook.
Basically, it would look like this (inline text doesn't make a good illustration, but it's better than nothing)...
Router 1 ------(network cable)---------Router 2)))))))(wifi wave)))))))Nook
Sure you will need to setup the router correctly, but it's still very easy to do.
What I am trying to figure out is if I can use my Droid Bionic as the internet source to my router, using the usb tether option.
I am trying to provide a stronger signal to other devices in my house, and to have a private network that will work my printer, satellte tv, etc.
Is this possible?
Not that i know of unless using the wireless tether and using your router to jump the signal.. if tour router supports it.
Sent from my DROID BIONIC using XDA App
Wireless signal repeating is a part of the 802.11n spec. If you have a wireless-N router there should be a firmware option to enable it.
Maybe USB tethering to a PC is the solution. The steps required after that might get complex, but in short your goal is to bridge that connection to your standard ethernet adapter on the PC.
Plug the ethernet from your PC into the router. Put this in place of where your modem typically connects and you should be only a few networking tutorials away from a configuration that works.
USB tethering isn't supported on your router most likely, or any router for that matter. That's why you are going to have to put a PC running Vista+ or Ubuntu 10+ (others may work) for interfacing the connection to a standard ethernet cable.
If a repeater is all you need this won't be useful for you.
Personally, I intend to configure my network to use the 4G connection's superior upload rate, as my ISP at home provides 3Mbps upload while 4G gets 10Mbps.
Using modified firmware on the router will make many things possible. You may want to check out DD-WRT (what I'm currently using) or Tomato.
Do you want both WAN connections (ISP and 4G) to be available to your network?
Sorry if I'm confusing anyone. =)
Sent from my DROID BIONIC using XDA App
Just the 4g.
I currently use the wireless tether option, which provides me 4g internet access for all devices in my house, but I do not have much latitude as far as distance ( the further away the device is from the phone, quality of service declines).
I know that I can USB tether the phone using pda-connect, which works rather well. I just want to use my wireless printer without a lot hassle, and have 1 network that is complete.
Dan
USB.. Not without additional hardware people have already mentioned.
Your router can pick up the WiFi tether from you phone and use it. I have this setup at home with my LinkSys WRT54G. Its called "repeater" mode. I'm not saying it can do it with the stock firmware, but it can thanks to the DD-WRT firmware I loaded onto it. Just google DD-WRT. Many older routers can install it freely. They started charging registrations for some newer routers. That's why I bought a used WRT54G off e-bay for $20 bucks, since I didn't have a router anyways
Sent from my DROID BIONIC using XDA App
I would agree with the previous setup also.
But really, there's no better router than a book and an old dusty PC.
I want to do exactly this.
Currently, I have limited functionality with an old cradlepoint router. The router works fine with PC's and mac's but not the iPad. I narrowed the problem down to the MTU setting which cannot be adjusted on the router or the iPad.
I was thinking about purchasing one of those sapido routers, but I'm not sure if it supports the bionic. The price is right though.
Any update on this thread?
Hey again gang,
So, I did it... I purchased a sapido router from amazon... this one to be exact:
http://www.amazon.com/Sapido-GR-173...OY/ref=sr_1_11?ie=UTF8&qid=1327437644&sr=8-11
I received the router yesterday and connected it to my phone and it works beautifully... better and faster than any other internet service provider we have out here (Time Warner, Local telcom, clearwire, etc...). Just to let all of you know too, I have the 901 ROM installed on my phone, so no more disconnects. I was watching veetle all night and not one hickup.
All I did to get everything to work was go into settings, Wireless & networks, Tetehring & Mobile Hotspot and check USB tethering. The router finds the connection instantly and the green light comes on indicating that we have internet!!
Ethernet and wireless work great to my desktop and laptop. I did try it out with my iPad. The connection to the iPad mostly works, but it does take forever to get some pages. To remedy this, if you do get the router, change the MTU settings from 1492 to 1400 and then everything works beautifully to an iPad.
Best of luck to all of you who decide to use your phone as the main source of internet to your home through the usage of the outstanding sapido router!
Thanks.
Howdy,
Same here. I went with the Sapido RB-1733 from Amazon. Works fine as a regular router, and I can plug my Bionic into the USB port and charge it while its using the tether option. Much better at having a full size router spreading your wifi around the house, besides wired networked stuff.
later...
Purchased gr-1733, but can not get it to work properly. Please tell me the settings you used to get this working. I am using verizon bionic with 4g.
calimansi said:
... I purchased a...
Click to expand...
Click to collapse
I want to tell everybody purchasing routers that support USB built in: your existing network equipment (router) or any old, unused PC can do this for you free.
In fact, there are so many ways to share your 4G throughout your home I won't explain them in-depth unless there are specific questions.
Routers: many routers (Linksys, Buffalo, Belkin, NetGear, ASUS, and many more) contain hardware capable of running open-source firmware. My network contains many flashed routers: Linksys E4200 v1, Linksys E2000, Buffalo WHT-HP-54G, and Belkin F7D7301 v1. These models are all compatible with modified firmware. But keep reading...
ALL YOU NEED IS A USB PORT on your router. The firmwares (assuming your router is compatible) take care of the rest. Be warned, there are ways to brick your routers if you don't read the wiki/forum threads properly. In my opinion, these are much easier to flash than phones.
The DD-WRT supported devices list will let you know if you have a box *already compatible* with DD-WRT. Otherwise, use this reference to shop around for a router with at least:
8 MB flash
1 USB port (you can expand with a powered USB hub)
Support for optware (any Broadcomm router will work!)
This isn't very easy to find but almost any Linksys router has a broadcomm, for example. I can provide reference for any of you that might have questions.
Your router needs writeable space to keep a couple kernel modules that may/may not be built in to the particular DD-WRT flavour/build. Basically, this is something dependent on a per-router basis.
If you have something listed on the supported devices list, I will be happy to provide some reference on whether or not you will be able to do this.
USING A[N OLD] COMPUTER:
Get a linux distribution of your choice (I'll provide links on request)
Enable USB tether on your phone while plugged into a high-speed port.
Configure the connection to route out of your standard Ethernet adapter.
Plug your existing router's WAN/Internet port into the linux computer's Ethernet port.
And from here you troubleshoot. And I can try to help.
I will probably write something up on how to do this on my website once I get things running. For now, I'll subscribe to the thread and take questions here. I'd also like to point out there are many other creative ways somebody can do this. Just keep asking.
Good luck keeping your battery from draining faster than it can charge; I sincerely mean that. WiFi Tether can be killer if using it as a shared connection.
fxmech said:
I want to tell everybody purchasing routers that support USB built in: your existing network equipment (router) or any old, unused PC can do this for you free.
In fact, there are so many ways to share your 4G throughout your home I won't explain them in-depth unless there are specific questions.
Routers: many routers (Linksys, Buffalo, Belkin, NetGear, ASUS, and many more) contain hardware capable of running open-source firmware. My network contains many flashed routers: Linksys E4200 v1, Linksys E2000, Buffalo WHT-HP-54G, and Belkin F7D7301 v1. These models are all compatible with modified firmware. But keep reading...
ALL YOU NEED IS A USB PORT on your router. The firmwares (assuming your router is compatible) take care of the rest. Be warned, there are ways to brick your routers if you don't read the wiki/forum threads properly. In my opinion, these are much easier to flash than phones.
The DD-WRT supported devices list will let you know if you have a box *already compatible* with DD-WRT. Otherwise, use this reference to shop around for a router with at least:
8 MB flash
1 USB port (you can expand with a powered USB hub)
Support for optware (any Broadcomm router will work!)
This isn't very easy to find but almost any Linksys router has a broadcomm, for example. I can provide reference for any of you that might have questions.
Your router needs writeable space to keep a couple kernel modules that may/may not be built in to the particular DD-WRT flavour/build. Basically, this is something dependent on a per-router basis.
If you have something listed on the supported devices list, I will be happy to provide some reference on whether or not you will be able to do this.
USING A[N OLD] COMPUTER:
Get a linux distribution of your choice (I'll provide links on request)
Enable USB tether on your phone while plugged into a high-speed port.
Configure the connection to route out of your standard Ethernet adapter.
Plug your existing router's WAN/Internet port into the linux computer's Ethernet port.
And from here you troubleshoot. And I can try to help.
I will probably write something up on how to do this on my website once I get things running. For now, I'll subscribe to the thread and take questions here. I'd also like to point out there are many other creative ways somebody can do this. Just keep asking.
Click to expand...
Click to collapse
FXMech,
So i've had a Linksys E4200 for some time and after reading your instructions have flashed dd-wrt onto my router. There are a lot of neat features now available but i'm not sure how to get the router to use my phone at an internet source. I'm using a motorola usb data cable and have easy tether set to share my internet and when i plug it into my router i get nothing. any help with this would be appreciated.
fxmech said:
I want to tell everybody purchasing routers that support USB built in: your existing network equipment (router) or any old, unused PC can do this for you free.
In fact, there are so many ways to share your 4G throughout your home I won't explain them in-depth unless there are specific questions.
Routers: many routers (Linksys, Buffalo, Belkin, NetGear, ASUS, and many more) contain hardware capable of running open-source firmware. My network contains many flashed routers: Linksys E4200 v1, Linksys E2000, Buffalo WHT-HP-54G, and Belkin F7D7301 v1. These models are all compatible with modified firmware. But keep reading...
ALL YOU NEED IS A USB PORT on your router. The firmwares (assuming your router is compatible) take care of the rest. Be warned, there are ways to brick your routers if you don't read the wiki/forum threads properly. In my opinion, these are much easier to flash than phones.
The DD-WRT supported devices list will let you know if you have a box *already compatible* with DD-WRT. Otherwise, use this reference to shop around for a router with at least:
8 MB flash
1 USB port (you can expand with a powered USB hub)
Support for optware (any Broadcomm router will work!)
This isn't very easy to find but almost any Linksys router has a broadcomm, for example. I can provide reference for any of you that might have questions.
Your router needs writeable space to keep a couple kernel modules that may/may not be built in to the particular DD-WRT flavour/build. Basically, this is something dependent on a per-router basis.
If you have something listed on the supported devices list, I will be happy to provide some reference on whether or not you will be able to do this.
USING A[N OLD] COMPUTER:
Get a linux distribution of your choice (I'll provide links on request)
Enable USB tether on your phone while plugged into a high-speed port.
Configure the connection to route out of your standard Ethernet adapter.
Plug your existing router's WAN/Internet port into the linux computer's Ethernet port.
And from here you troubleshoot. And I can try to help.
I will probably write something up on how to do this on my website once I get things running. For now, I'll subscribe to the thread and take questions here. I'd also like to point out there are many other creative ways somebody can do this. Just keep asking.
Click to expand...
Click to collapse
Some advice on how to get Android USB tethering to work on dd-wrt would be much appreciated.
Using a Linksys E3000 - DD-WRT Build 19519 installed
JFFS2 Enabled
usbnet.ko, cdc_ether.ko and rndis_host.ko installed
Now stuck at this point.
Thanks in advance
Nice before I even read this I was doing usb teather to my computer. Then I would hook my router up to my computers ethernet port to outers internet port. I have windows 7 so I did network bridge and the router had internet. To bad you need the computer but other than that wifi on router is grwat. Lan is also great. I play xbox live from this setup.
Hehe, I was just going to find some reference on the Ubuntu equivalent of "Connection Sharing," and landed back here forgetting completely about how I've helped motivate this search result.
Here's the deal - I was wrong about a few of my previous posts, I am too lazy to retract and edit out the stupidity,
I have since discovered a fundamental flaw in my logic - "USB tether" is NOT equal to "USB modem" - don't ask me why. However, I can say I know the limitations now.
Bad news: All USB-capable routers supporting TomatoUSB ( http://tomatousb.org ) or DD-WRT ( http://dd-wrt.com/wiki [the main site is useless for regular people, stick to the wiki & forums] ) will not allow this. I have just confirmed in the DD-WRT Kong Mod build for the Linksys E4200 won't do it. To cut to the chase, this build included what I suspected to be the additional modules usually needed. Turns out, those modules are for USB modems, which is a separate type of subscription service, not to mention an additional Dongle to buy. I suppose it's useful for some.
I like to skate by on the cheap, so I won't be able to speak to these (awesome sounding) routers previous people bought. For those of us still wanting to have fancy internet sharing (non-phone-WiFi), you will have your answers revealed. Just not this post. I am not ready to tear down some of my excess equipment and get it rigged up quite yet.
I will be working with Windows 7 and Windows Server 2008 R2 machines at a later date. I anticipate no problems with either, and from my estimation the gist of what's required has already been talked about in this thread.
However, as the resident dork-in-charge of my home office - my specific interest lies in "multiple WAN" on my router. There are 2 reasons to do this. Redundancy or[and?] load-balancing. My new gateway since my last posts in the topic has switched from the E4200 over to an installation of Zentyal 3.0 ( http://zentyal.org ). Zentyal 3.0 is based on Ubuntu Server 12.04 LTS, so I suspect it is possible to tether.
I anticipate a lot of people might stumble here searching The Google. I figure I might as well write this out in a organized, thorough way. More to come as I make room in my brains to type out a relatively coherent tutorial for both OSes.
Sorry guys, 2 people flashed routers per my speculation. If I find any solid info in the future I'll check back.
Sent from my DROID BIONIC using xda app-developers app
Thanks for the update!
Sent from my ADR6425LVW using xda premium
Looks like Android USB tethering to a router is working with the ASUS RT-N66U. I haven't bought the router yet, but I plan to soon.
See here for instructions: http://support.asus.com/Search/KDetail.aspx?SLanguage=en&no=A02827F8-3DB9-CC0E-5F67-85F7D3FB48E4&t=2
First before people ask...no I can't get a decent ISP in my new apartment complex. They have a "deal" with some horrible small-time cable company that I've never heard of, and all the neighbors hate it. On top of that I have talked my work into paying for the account I plan on using for this since it's "required" so that I can work from home as needed.
That being said, I've done some initial speed tests at my new place and I get a consistent 11Mbps/3Mbps over Sprint's 4G/WiMAX, which is more than enough for my needs. I know that will fluctuate, but even so I'm excited about this project!
So sure I could just dump WiFi Tether on a rooted NS4G and leave it be, but I want to try taking it to the next level. What I'm thinking is a full-time router, much like a pfSense/SmoothWall/Vyatta distro, using the WiMAX (And 3G as a backup) for the WAN and the WiFi for the network connectivity. Unless I can figure out a better solution I would probably use a WRT54GL with dd-wrt to act as the wireless bridge for my wired clients.
It'll always be plugged into power, so battery isn't an issue (But a nice bonus for when the power does go out). I would like to have an always running bandwidth monitoring screen that I can just glance at. Of course there would be remote monitoring/configuration, as well as some built-in "apps".
I know this is a big task to take on, but I need something to focus on in regards to getting into the development side of things and I think this would be a great place to start. However I've got some questions that I think ya'll could help me figure out:
1 - What should I do for providing services like DHCP, DNS, Port Forwarding, NAT, etc? I know it would require some heavy lifting but I could cross-compile standard linux based apps like dhcpd right?
Or does anyone know of that perfect app that might help me get a head start? I don't mind using different apps/services and then focusing on making them all work together, but if there is a "simple" solution already that would be fine by me!
2 - Since it's not going to be a multimedia demon, is there a particular light-weight, almost console-only ROM that might serve to be the best base to build from? I would think something that is more geared towards running desktop-based applications versus the standard apps.
3 - WiMAX needs to work of course, how would that play into it?
4 - Is that anything that might allow me to plugin a standard ethernet cable? I don't think I've seen a mini-usb to ethernet yet...do they have a mini-usb to regular usb at least?
I know these are very basic questions, but I just want to get a pulse on if this is just an unobtainable idea or not. I don't think it is, it's basically a different way of getting to a MiFi. Also if anyone knows of anyone elses past attempts at this I would love to know where I can read up on it in. Thanx in advance!!!
My phone overheats if it tethers for hours upon hours. Gets kind of annoying. I suggest you buy a external charger and another battery so you don't have to play " let the battery cool down" game.
I had the same issue on my other 2 smartphones while tethering (Samsung instinct with ported 1.6. And optimus s)
I would say try finding a loophole or move. Slow internet is a whore. I use hot sport off my phone to my ps3. And I can only play from 11pm-6am lag-free.
Sent from my Nexus S 4G using Tapatalk
Are you oc'ed or something I tether my phone for hours a day and havent had it over heat except for when I was oc'ed above 1.2ghz.
There are a few issues with this.
1.Restrictive firewalling policies on the ISP side. Blocked ports/ throttling.
2.Added latency from wireless > wireless bridge. With wireless you will need to tether to a wireless bridge with ethernet ports for your computers. wrt54g and the like with dd-wrt work fine for this. A linux computer with a wireless card would also work. Tethering with USB to a linux computer that you can edit the iptables rules would be best.
3.Double NAT. This is something you must avoid to have a proper connection. With wireless your tethering program is going to use NAT, but then your bridge will probably also use NAT. This will leave you with a very convoluted connection. Tethering with USB would probably also be best here. In the past when I have used USB tethering (motor razr) the host PC gets assigned the true WAN address of the phone via a virtual adapter. Thus this would only require setting up NAT/ iptables once on the host PC.
My suggestion would be to exchange the phone/plan for a 3g/4g data card that works with GNU/Linux and setup NAT that way of course along with an ethernet switch. Good luck with it.
Jason_25 said:
There are a few issues with this.
1.Restrictive firewalling policies on the ISP side. Blocked ports/ throttling.
2.Added latency from wireless > wireless bridge. With wireless you will need to tether to a wireless bridge with ethernet ports for your computers. wrt54g and the like with dd-wrt work fine for this. A linux computer with a wireless card would also work. Tethering with USB to a linux computer that you can edit the iptables rules would be best.
3.Double NAT. This is something you must avoid to have a proper connection. With wireless your tethering program is going to use NAT, but then your bridge will probably also use NAT. This will leave you with a very convoluted connection. Tethering with USB would probably also be best here. In the past when I have used USB tethering (motor razr) the host PC gets assigned the true WAN address of the phone via a virtual adapter. Thus this would only require setting up NAT/ iptables once on the host PC.
My suggestion would be to exchange the phone/plan for a 3g/4g data card that works with GNU/Linux and setup NAT that way of course along with an ethernet switch. Good luck with it.
Click to expand...
Click to collapse
But he would then be giving up unlimited data as a result of leaving the phone plans.
Sent from my Nexus S 4G using Tapatalk