Hey guys,
As awesome as silicon cases (the treated ones of course, not the sticky ones) may be, they're usually not very windshield mount friendly.
I was wondering if any of you has found a dashboard mount system that works with a silicon case such as http://www.pdair.com/catalog/product_info.php?products_id=26975
cheers
I have flexishield and it doesnt work with the carkit I got from mobilefun it's a really nice carkit without case tho. just the holder is too small. I've seen people melt/sand down their car-kit holders tho.
Car kit for silicon case
the Navman iCN 510 or iCN520 or iCN530 cradle fits perfectly if you hav a silicon case.
Have a look
Hi.
Does anyone know of a arm holder or a strap on case for HD2?
The kind that you can strap on your arm during training or activities?
Thanks!
http://forum.xda-developers.com/showthread.php?t=635938
Thanks a lot!!
http://forum.xda-developers.com/showthread.php?t=585338&page=3&p=5800833
Am looking for a minimalistic car holder like the one for the HTC M8 but with QI. Found the iOttie Easy One Touch Wireless Qi but it's eh...ugly.
http://www.amazon.com/MoKo-Triple-C...amsung+Wireless+Charging+Vehicle+Dock+-+Black
sorry for necroing old thread. just curious, anybody out there use a car holder on their car?
considering that when you held s7 edge sometimes you touching the screen while holding it, how about this car holder? will it considered a touch also when being held by car holder?
thanks before
no one can answer my question pls?
I am happy with the Brodit Proclip holder. They also have an adjustable holder, if you use a case.
As the topic states, has anyone found a metal plate brand that has an adhesive that will actually stick to the rear of the 5T? I've tried a number of them, and they all pop right off when I go to pull the phone off the dash, leaving the plate attached to the magnets.
Specifically, I've tried the plate that came with:
"Maxboost" Magnetic Car Mount, which has no branding on the backer for the tape, so I'm not sure what it is
"DAFQCO" Magnetic Cell Phone Holder for Car, which used a 3M tape that i can't recall the number of off the top of my head
A Maxboost plate with it's tape replaced by 3M VHB Tape F9460PC tape.
I bought the Carbon fiber bumper case and attached the metal plate to the back of it with 3M double sided tape and leave it in my car.
Whenever I get in my car I just switch my case for the Carbon fiber bumper and have never had any troubles.
bp328i said:
I bought the Carbon fiber bumper case and attached the metal plate to the back of it with 3M double sided tape and leave it in my car.
Whenever I get in my car I just switch my case for the Carbon fiber bumper and have never had any troubles.
Click to expand...
Click to collapse
Where did you buy that carbon fiber bumper case? Can you provide a link?
Enviado do meu ONEPLUS A5010 através do Tapatalk
It's the official one from OnePlus.
https://oneplus.net/oneplus-5t-bumper-case
In this case, problem is about magnet is too strong, you can try using small metal plate or better adhesive.
Or put metal plate in between case and phone, magnet is strong enough to hold it (make sure to put protective film on plate or phone)
tonni3 said:
In this case, problem is about magnet is too strong, you can try using small metal plate or better adhesive.
Or put metal plate in between case and phone, magnet is strong enough to hold it (make sure to put protective film on plate or phone)
Click to expand...
Click to collapse
This is what I did. I used simple vinyl tape (electric tape) so the metal wouldn't scratch the phone
I bought the sandstone cover from the oneplus store.
In the future you might consider the proclip mount. I've had mine for 5 years and it's adjustable case has worked for every phone I've had since. I'm also anal about not having my AC air blowing on my phone in a vent mount. Probably a personal problem.
SoulkeepHL said:
As the topic states, has anyone found a metal plate brand that has an adhesive that will actually stick to the rear of the 5T? I've tried a number of them, and they all pop right off when I go to pull the phone off the dash, leaving the plate attached to the magnets.
Specifically, I've tried the plate that came with:
"Maxboost" Magnetic Car Mount, which has no branding on the backer for the tape, so I'm not sure what it is
"DAFQCO" Magnetic Cell Phone Holder for Car, which used a 3M tape that i can't recall the number of off the top of my head
A Maxboost plate with it's tape replaced by 3M VHB Tape F9460PC tape.
Click to expand...
Click to collapse
I ordered the spigen metal plate from Amazon. So far it hasn't come off. And I use it with the original thin case, the red case, and naked.
I use Tech Sense Lab Magback car mount. Wonderful product. I have the still plates attached to my phones case from inside. Works perfectly.
propagandax said:
In the future you might consider the proclip mount. I've had mine for 5 years and it's adjustable case has worked for every phone I've had since. I'm also anal about not having my AC air blowing on my phone in a vent mount. Probably a personal problem.
Click to expand...
Click to collapse
Thanks, I actually have the car half of a pro clip mount for my car, I love the quality and the ingenuity of the mount, I just don't love where it ends up placing it in a 7th gen VW GTI (right in the passengers knee if they're tall).
I ended up using the heavy duty exterior grade Scotch double sided foam tape (that's effectively 3M automotive trim tape) for a week before I ended up just building a car mount. And all this started because I'm one of the crazy people who doesn't use a case at all.
SoulkeepHL said:
Thanks, I actually have the car half of a pro clip mount for my car, i love the quality and the ingenuity of the mount, I just don't love where it ends up placing it in a 7th gen VW GTI (right in the passengers knee is they're tall).
I ended up using the heavy duty exterior grade scotch double sided foam tape (that's effectively 3M automotive trim tape) for a week before I ended up just building a car mount. And all this started because I'm one of the crazy people who doesn't use a case at all.
Click to expand...
Click to collapse
Cell helmet sounds like exactly what you're looking for. I've been using one for two years now on multiple phones and haven't had any issues: https://www.cellhelmet.com/pages/mounts
I'm searching for a magnetic phone holder which you can mount into the air vent of a car. Tried a few but the magnets are not strong enough to hold the phone.
Any advise, preferably based on experience.
Grab a thin metal plate adhesive from the one side, and stick it on the back of the phone or just place it inside a hard TPU case (between the case and the back of the phone), and it will be held like magic.
The plate must be large enough to hold it properly.
Some magnetic holders in the market include such metal plates.
I recommend Magnetic holder brand Baseus
It sticks very well even on rough road. Been using it for a month and never once it fall off.
Bought it for around $5
Premium build quality and also it comes with nice metal plate wrapped with leather.
Worth every cents.