I managed to break my antenna and now I don't know if I'm missing pieces of it; There is a clear plastic body with a fixed bronze stud and a plastic cap. Is that It? I don't have the phone activated currently so I don't know if the reception will be affected. Does anybody know where to get a replacement?
I drive a Motorcycle to commute to work everyday, and I got one of those GPS holders so I drive around with my device in it to have the MP3 playing, anyway I didn't put it correctly and suddenly @ about 30 MPH I stopped hearing music; My PDA was 150 yards behind.
Anybody know how to post pic's if I don't have a server?
Pictures...
If you send me the pictures, I'll put them online and stick 'em in your message.
You were damn lucky to have only the antenna damaged...
I sent the pictures to your e-mail, Unfortunately not only the antenna got damaged, the aftermarket leather cover that I bought (Krusell) has the edges exposed so that area got scratched also, there's even a crack on top of the earbud connector, but that's minor.
So anybody know where to buy the antenna and covers replacement ?
Am I missing parts for the antenna assembly?
Thanks for your help.
Great forum.
Miguel
Here's the images:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes, it looks like there's stuff missing.
Actually, I ended up breaking my antenna by pulling my XDA out of my pocket so many times by the antenna. Eventually, it just popped off.
Inside is a small spring that apparently acts as an antenna. Once that popped out and got lost, I was unable to recieve any signal from my XDA. I called T-Mobile and RMA'd the phone. My new one works just fine, and I've been careful to go easy on the antenna.
I had the same and found that a cut down spring from a pen (the one that goes arround the ink thing does a good job at replaceing the antenna coil.
Haveing said that I retuned my device as was given a replacement as well
Related
Hi, Anybody got any experience with these things b4 I buy?
I see on their web site http://www.over-board.co.uk/catalog/product_info.php?cPath=30_43&products_id=43 that this bit of kit would fit a TyTnII.
But paying £434 for the device I am a tad twitchy re a £14.99 bag protecting it even though the supplier/manufacturer say it is up to the job?
Any advice welcome.....
My brother-in-law has another brand of this type of case and it works well.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks chaps.
ChumleyEx are you avin a laugh?
Ziploc food bags? )))) lol
Don't laugh, when I go to a water park, pool, or any place my phone might get wet, I put mine in a zip loc. The "snack" size ones work perfect.
Heres an idea from you guys!!!
Buy one , call Guiness Book of records, Be the first to send a text message from your phone from underwater!!
Too late already done it, did'nt get in
I used an AquaPac with my previous phone. Unfortunately my Tilt won't fit in the bag, or at least not WELL. It's just slightly too tacky and large to fit and once it goes in it's hell getting it back out.
But they do make larger ones, even very large ones. They're great if you know there is a good chance of the phone getting dunked or wet from rain, etc.. I always used mine when geocaching around water or in the rain. So far I've just avoided the situations with the Tilt, but I'd like to get a larger AquaPac sometime.
Yeah, ordered it now.
I want to use it when in the hotel spa, pool etc. Still not too sure how the touch screen will work whilst in but will give it a go
Thanks folks
I use the Cochlan's waterproof bags You get three different sizes in a pack and work great. I use it if I go to the beach.
This is what i use and it works great.
Have now got the case.
I must say it looks very think plastic but I see that it is a good design, but think I will still twitch when using it!!!
Also got it now.
Did a test with it and it works.
Even tested it with my Tytn2
Anyone knows where i can find it? Mine is slightly loose now, (after i opened it for changing the SD-card)
Any help is much appreciated.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I bought mine and didn't even touch it and there's a gap between the charger and the bottom cover of the phone where you can see the SIM card. Just a very poor design.
I have the same problem. I opened it to swap the sd card, and since then it doesn't close perfectly anymore.
I called htc about this, and they confirm that they only sell the upper part of the back cover. You can send it in, but then it'll cost you about 40 dollars for the fix, minus the shipping. I just ordered a silicone cover instead.
I just hope that they will start selling those bottom parts too.
Agent Blair said:
I bought mine and didn't even touch it and there's a gap between the charger and the bottom cover of the phone where you can see the SIM card. Just a very poor design.
Click to expand...
Click to collapse
I agree with you I have seen many review criticise this! There seems to be a poor quality control at HTC for the HD7, the gap to me looks like about 1mm that's not acceptable!
Fortunately I have been very luck my HD7 does not have that gap!
It's a shame ... seriously ... the back housing is not the only part of a low quality ...
Even the power button doesnt seem to work properly (after two week of usage!) and i have to press it really hard to get it to work.
and I also saw the "Tarnished camera button" in the other thread ...
HTC!!!! SERIOUSLY?!!!
my local HTC repair shop contacted a lot of people but was also unable to get the part. i am thinking of superglue right now ...
superglued down. no other option but its perfect now
The gap annoyed me after I upgraded it to 32GB... So I carefully sanded down some of the plastic lugs and superglued the bottom part to the body. Yup, I know it was quite drastic but at least I've ended up with a perfect HD7... And a voided warranty! It's a shame that HTC allowed this horrible gap. My old HD2 was much better finished.
As much as i'd like to post a link for some back covers for you all there seems to be a lack of spare parts for the moment . I did however find a coverall solution that although doesn't fix your phones will at least let you hold it together until we can buy some at a later date
http://cgi.ebay.co.uk/HTC-HD7-SHUBERT-ARMOUR-BACK-CASE-SILVER-UK-FREE-P-P-/120660151117
If you don't like the look of those there are various ones available from the us http://shop.ebay.com/?_from=R40&_np...313&_nkw=hd7+casing&_sacat=See-All-Categories
I recently replaced my digitizer and the housing after letting my precious nexus one fall on some rocks. Everything went relatively smooth but since the replacement the phone has a really really bad reception. I asume i made a mistake during the reassembly but i have no idea where the antennas are. Can someone point me in the right direction?
Kind regards.
Seems like this connection is a little loose, if necessary place a small piece of tape over it if it won't click together. Did the job just fine on mine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
that is the gps antenna right? That one is propperly connected in my device.
I would like to know the location of the cell antenna.
I had the same problem. After I replaced the digitizer I could barley get a wireless signal but everything else worked perfect. I ending up selling it on ebay as a parts phone. Hope you find a solution.
The cell antenna should be at the bottom of the phone because I remember people complaining about how holding the bottom of the phone decreases the signal.
Necromanx said:
that is the gps antenna right? That one is propperly connected in my device.
I would like to know the location of the cell antenna.
Click to expand...
Click to collapse
Ah sorry, as the above post said it's under the bottom part of the phone. Something could have been moved in the removal/replacing of the bottom part of the phone, it is awkward to get off.
I would assume it's all the copper colored metal inside the phone that acts as the antenna. mine is similarly plagued, it seems that after taking one apart, it doesn't quite work as well.
i barely touched the copper sheet.
Does anyone knows what this is?
(type "Antenna Flex Cable Ribbon Sticker" in google, i am not allowed to post urls yet )
I didnt saw these parts in my phone
I'm after a car phone holder with a USB connection built in. Has anyone come across one for a sensible price?
All I can find is the official HTC one which is over £50!! I've toyed with the idea of using a desk dock (£12), however I'm not sure whether this is a good plan as the phone's USB port will be put under some strain from the vibration of the vehicle which could lead to it being damaged.
EViS try ebay I got mine from there about a year or so ago, don't use it now (ebay that is )
I use this one in my car:
dealextreme.com/p/usb-ac-battery-charging-dock-cradle-for-htc-hd2-100-240v-44622
Works fine, connected both usb-connections to chargers... also charges extra battery.
Just attached with some welcro to the underside and the dash.....
totto222 said:
I use this one in my car:
dealextreme.com/p/usb-ac-battery-charging-dock-cradle-for-htc-hd2-100-240v-44622
Works fine, connected both usb-connections to chargers... also charges extra battery.
Just attached with some welcro to the underside and the dash.....
Click to expand...
Click to collapse
Linked for you.
http://dealextreme.com/p/usb-ac-battery-charging-dock-cradle-for-htc-hd2-100-240v-44622
Will that fit the TMOUS HD2?
I know a USB connection was required, but those are hard to find for a car cradle. I just got one of these for $7.50 on Amazon.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Card Cradle on Amazon
Works great. Sticks to my windshield and holds on. Pefect fit for my TMOUS HD2 in the holder with no lame thick padding. Camera functions also via an opening for it in the holder. Turns many ways for custom angles. I'm buying a second for my desk at work because I'm just that geeky.
Does that one shake while you driving?
I've got me self something like this but when i'm using it with eg. alaprecoreder app i cant get decent video....
VandaL.pr! said:
Does that one shake while you driving?
Click to expand...
Click to collapse
It does just a little bit. I didn't think about that and video. I'll do a test video when I head out for lunch later.
*Edit*
I ran some video tests and was impressed with the results. If your car rides smooth, the holder should stay still. My truck does not ride smoothly but most of the time it worked and the video was very watchable. I only had issues with bumpy road spots, shifting, or when I got over 70 mph (112 kph). Not an issue with the holder, just my truck shaking some.
Hi,
My Z3C must've randomly lost part of the bottom bezel at some point - I still don't understand why and how.
Phone was always in a TPU bumper case so it can't fall off or out. Must've gotten loose and dropped at some point when I removed the bumper to remove the sim card.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The part that's missing is the edge part between bottom bezel and SIM card flap.
Phone was just sent in for repair for another issue(vibration more had a loose connection) and I got it back without issues..but that part of the bezel is still missing. Didn't mention it when it was repaired in fear of Sony denying a warranty repair.
Fixing it would be 5s job with super glue....so any idea where and how to get that part ?
Did lots of googling but couldn't find anything.
Only other option I could think of would be buying a broken/dead Z3C and ripping that bezel piece off.
youll probably have to get the whole frame
Seems like a waste. The small part that's missing ist just glued on.
Guess I'll have to look for a broken Z3C to get the spare part.
Are there Showroom models of the Z3C ? Like they have in shops sometimes, just the exterior without any electronics inside.
*Edit* Oh ok now I realize what you meant.
http://www.ebay.com/itm/for-Sony-Xp...Metal-Frame-Bezel-Plate-ZVHR277-/301593214487
Didn't expect the entire frame to be that cheap! Thanks m8.
I have a lot of it but if You live outside EU shipping can be more expensive than those fram on eBay.
I do live in the EU but allready ordered the ebay bezel.
Thanks though, might help out the next guy.
No problem. I have a lot of it cause whole frame is a trash after changing whole screen using original part. Anyway good advice for You - change only bumpers You need, not the whole frame. If You don't have knowledge hot to remove screen safety just skip it.
Sent from my Sony Xperia Z3 Compact using XDA Labs