Dual SIM Recommendations - MDA, XDA, 1010 Accessories

Does anyone have a 'tested' solution for the XDA/SX56? I've seen the cutting solution as well as a Ghost SIM C solution posted, but has anyone had any success with these or other solutions?
If posting an answer, please show features, pros, and cons.
For instance, the cutting solution
-Features: Power cycle to switch between cards
-Pros: Fits two sims into a one sim device
-Cons: Only supports two sims, not all sims can be cut, cutting sims can possible damage card.
Thanks,
-GD
Update 01/08/04 - Mobileplace.co.uk is examining solutions and will notify me of a solution, if it exists, at the end of this month.

Hi, cant offer you a solution as yet but I too have e-mailled Mobileplace.co.uk and sent them images of the sim slot for the XDA, they inform me they currently have no product with which to enable dual sims. They too have advised me that they will contact me if a solution is available.

Related

Experience with DualSim in Treo 750

I have a work SIM and a private SIM and really do not want to carry two phones around. In my previous two models of regular (not-smart) phones I used one of those dualsim cards where you cut our the center of each sim and slip them into a new sim card with some extra electronics on it. You can then switch between the sims with a couple of key presses or even at automatic time intervals. eg. http://duosim.com/
OK, so I have two different makes of this type of dual-sim card and tried each one in the 750. The switching program shows up in the phones menu and it looks like it is going to work but it does not. When you try to switch to the second sim, the phone switches off and back on, but the the phone is still using the first sim.
I really want to find a way to get this to work. I have ordered one of those multi-sim card cloners (same link as above), in the hope that will work differently.
Has anyone found a solution to this ? Either a particular make of dual-sim or multi-sim cloner that works or maybe a tweak to get past the above mentioned problem ?
gajsler said:
I have a work SIM and a private SIM and really do not want to carry two phones around. In my previous two models of regular (not-smart) phones I used one of those dualsim cards where you cut our the center of each sim and slip them into a new sim card with some extra electronics on it. You can then switch between the sims with a couple of key presses or even at automatic time intervals. eg. http://duosim.com/
OK, so I have two different makes of this type of dual-sim card and tried each one in the 750. The switching program shows up in the phones menu and it looks like it is going to work but it does not. When you try to switch to the second sim, the phone switches off and back on, but the the phone is still using the first sim.
I really want to find a way to get this to work. I have ordered one of those multi-sim card cloners (same link as above), in the hope that will work differently.
Has anyone found a solution to this ? Either a particular make of dual-sim or multi-sim cloner that works or maybe a tweak to get past the above mentioned problem ?
Click to expand...
Click to collapse
Hi gajsler,
I found myself being in the same situation: Want to use both office and private Sims with my Treo.
After some research I can say that it depends mostly on the combination of SIMs you are using. If you are using any UMTS/3G SIMs then a digital DualSim-application wouldn't do trick, especially if you are using a H3G-SIM (Hutchison 3G).
You will need an analog DualSim-holder for these SIMs.
I've got one from HongKong (Ghost SIM, no cutting) but it doesn't work correctly. Only the first SIM card is being used ... don't know how to get past this issue.
Seems to be tricky. Will post any additional experiences.
Greetz,
TreMax
gajsler said:
I have a work SIM and a private SIM and really do not want to carry two phones around. In my previous two models of regular (not-smart) phones I used one of those dualsim cards where you cut our the center of each sim and slip them into a new sim card with some extra electronics on it. You can then switch between the sims with a couple of key presses or even at automatic time intervals. eg. http://duosim.com/
OK, so I have two different makes of this type of dual-sim card and tried each one in the 750. The switching program shows up in the phones menu and it looks like it is going to work but it does not. When you try to switch to the second sim, the phone switches off and back on, but the the phone is still using the first sim.
I really want to find a way to get this to work. I have ordered one of those multi-sim card cloners (same link as above), in the hope that will work differently.
Has anyone found a solution to this ? Either a particular make of dual-sim or multi-sim cloner that works or maybe a tweak to get past the above mentioned problem ?
Click to expand...
Click to collapse
I'm using Simore Gold 2 and it works perpect.

Two sim cards ?

Does anyone know if there is a way to use two sim cards at the same time in the Kaiser ? I know that an adapter exist but I don't know if it would fit in the Kaiser ...
Thanks !
If you know more. Please share it with us.
Have you actually seen the sim card holder on a kaiser? its small and only room for one sim (even if you have ribbon cable from it to a 2 sim splitter) the lock mechanism stops any cable coming out so it would have to double back on the sim and come out the side and the side of the sim cover would need shaving to allow that and then on the back the form is moulded for the clearance of the keyboard so even if you stuck it to the back of the screen you will end up snagging it when opening and closing the keyboard.
if someone makes one that works then I will gladly take back what i said above however don't hold your breath.
Russ
I had a ghost Dual SIM adapter for my O2 XDA Exec & needed to cut each SIM down and place in a special Dual SIM holder which was the size of a single SIM. It worked fine, but I haven't had the nerve to cut up another couple of SIMs now that I've got a new T-Mobile VARIO III
weasel said:
I had a ghost Dual SIM adapter for my O2 XDA Exec & needed to cut each SIM down and place in a special Dual SIM holder which was the size of a single SIM. It worked fine, but I haven't had the nerve to cut up another couple of SIMs now that I've got a new T-Mobile VARIO III
Click to expand...
Click to collapse
Did that really work? The Kaiser just doesn't support dual SIM(IMHO).
Do you have to switch, or can you be called on 2 SIM's at the same time?
And how do you define the SIM to make the outgoing call?
I'm interested!
Yes, the ghost Dual SIM adapter seems interesting ...
Dual sims
I use them for thre last two years and stopped as they are a battery drain on the phones.
-No you cannot use them at the same time, you need to flick one on and off.
-Handy but not worth battery drain
Network operators may create a service where two numbers (from the same operator) are active on one sim. Perhaps this is not the ideal solution but workable. I believe that TIM and/or Vodafone in Italy (although I'm not from there) provide such a service.
leon100 said:
Network operators may create a service where two numbers (from the same operator) are active on one sim. Perhaps this is not the ideal solution but workable. I believe that TIM and/or Vodafone in Italy (although I'm not from there) provide such a service.
Click to expand...
Click to collapse
Orange in the UK provide this service. By pressing the # it switches froms one line to the other to make calls. Calls/SMS can be received on either line regardless of which line is selected for outgoing calls
I have a analogue dual-sim-adapter from http://www.hot-wire-telekom.de working in my Kaiser.
It's working fine with one problem: The operator names are not shown right. The problem was also known with the Artemis, but solvable by a registry change. This change is not working on the Kaiser, because the needed registry key is not present.
Does anyone have a solvation for that?
BiasX said:
I have a analogue dual-sim-adapter from http://www.hot-wire-telekom.de working in my Kaiser.
It's working fine with one problem: The operator names are not shown right. The problem was also known with the Artemis, but solvable by a registry change. This change is not working on the Kaiser, because the needed registry key is not present.
Does anyone have a solvation for that?
Click to expand...
Click to collapse
I have the same problem, also using an ana
log daptor. The today plug cab in also does not work in order to change the network, was working fine on the Trinity.
pff , i dont like to cut in my sim cards...
They are from my work.. Is there no other solution?
dual sim card PDA phone
how about this for a change?
http://www.myphone.com.ph/
I'm just waiting for HTC to make a handset like the Kaiser with dual sim slots, its a complete pain when I'm in work carrying a work one. Might be worth suggesting it to them, don't know how much they keep an eye on these sort of forums.
BiasX said:
I have a analogue dual-sim-adapter from http://www.hot-wire-telekom.de working in my Kaiser.
It's working fine with one problem: The operator names are not shown right. The problem was also known with the Artemis, but solvable by a registry change. This change is not working on the Kaiser, because the needed registry key is not present.
Does anyone have a solvation for that?
Click to expand...
Click to collapse
The todayplugin.cab doesnt work for me. How do you switch the network?
any updates on this?
how to stitch sims
yeah, I have an o2 flame, and I'm wondering how you choose which sim you want to make an outgoing call on? And can a incoming call come to either of the sims or do you have to switch something?
I recall seeing special tools out there allowing you to copy several sim cards onto one single one. Then when you turn on the phone, you can chose which "virtual" card gets powered up. Check it out on ebay.
do you have a name? for this tool/app ?
edit:
i found something : http://www.duosim.com/supersim.html
will that work?
Look up SIMORE on the web. The adapters have not been fully tested for Kaiser yet (P4550) but as it works on most other HTC units it should be available soon. Also gives many other functions.
This is another snip ya sim system but comes with two adapters to turn them back to full size when needed.
Hope this helps.

Kaiser Not Recognizing SIM All Of A Sudden

Can't figure out why. It's unlocked and I just took it back to factory settings.
For some reason it just stopped recognizing my SIM. Anything I can try? I would hate to assume it's broken.
Assuming you've searched the forum...
does the sim work on other phones? does another sim work in your kaiser or it doesn't recognize ANY sim?
have you tried cleaning the sim bay? (i dunno whats the recommended way to clean that area or even if cleaning it will make any difference)
and one more time...search this forum...i remember seeing quite a few threads about sims not getting recognized all of a sudden
My SIM works in other phones, but nothing works in this one.
I did search, but only found issues with the phone not reading it after flashing to a cooked ROM, not official ones. It didn't recognize it before or after I flashed to back to factory.
** I saw where apparently tmobile sims require a little more pressure, but that hasn't worked.
I've tried three different SIMS, one on tmo and one on att
So no one else?
similar issue !!
similar issue with gene(HTC 3400i)....
sending it for a replace tomorrow, but i will be thankful if somebody can advise a solution for this issue.
Have a look at this thread for a few ideas:
http://forum.xda-developers.com/showthread.php?t=423724
ideas
try cleaning your sim card with medical alcohol it help in some cases
ask for sim replacement from your network provided (from experience and reading - kiaser is very sensitive to sims)
Someone posted about this last month and his solution solved my problem.
Slide a piece of paper between the top of the SIM card and the top metal clip to push it down harder onto the contacts.
In my case some SIMs would not work, but this has cured it.

No sim card problem.

Hello to all,
before u start saying to search the forum, i did. But havent find solution for my problem so i opened a new thread.
So the problem is that my tytn register some sim cards but some dont, its like a random thing. My old sim card and new one works, now i tried with new sim card but from a nother network, and it says no sim, i try with my old sim from the same network and it works. I tested with about 10 random sim cards and 6 out of 10 works, no matter how old they are and from what network they are. I flashed my phone, tried new roms, cleaned sim card slot, but nothing worked.
If u can help me, i will be verry grateful
P.S: Sorry for my bad english
out of the 10 sims, 6 work...correct? lets call the sims that work numbers "1 through 6" and lets call the sims that don't work numbers "7 through 10".
i would say it is a hardware problem IF AND ONLY IF even one of "1 through 6" STOP working or if even one of "7 through 10" START working.
in other words, it is NOT a hardware problem if "1 through 6" work consistently and "7 through 10" fail consistently.
if you determine that it is a hardware problem, then try inserting a piece of paper behind the sim for an extra tight connection or search for bad/loose "main flex cable" and/or "sim assembly".
if you determine that it is not a hardware problem, search about possible known incompatibilities of the kaiser with certain networks' sim cards.
Thanks for advice...i fixed the problem by bending the metal that holds sim card.
But i still dont get it how that fixed things cause sim cards one that worked they worked every time and othet way around with non working sim cards...but ok... now they all work...
nice to hear your problem is solved!
i believe the sim cards that didn't work were probably just "thinner" than the ones that worked. so bending the metal pushes the thin sim cards tighter against the connectors. inserting a piece of paper behind the sim card has the same effect, and it is one of the first suggestions you will read about in most threads about sim card problems.
anyway, congratulations, and its nice to see that you updated your thread with information that helps "close" the issue...perhaps you can change the title of this thread to indicate that the issue was "SOLVED" so that future readers can benefit from it.

No sim card, comes and goes..

My devices sometimes cannot read the sim card, and some times it can. No matter what sim I use, what ROM I use, and I've even tried another sim card reader, but the problem seem to be something else.
Anyone experienced this?
I've been looking for a way to emulate a sim card, like a soft sim solution, but it seem this is not easy..
Maybe it's time to let the old m7 retire...
Anyway, thanks to all contributors in this community, it's been awesome. Merry Christmas and a happy new year.
rbrandser said:
My devices sometimes cannot read the sim card, and some times it can. No matter what sim I use, what ROM I use, and I've even tried another sim card reader, but the problem seem to be something else.
Anyone experienced this?
I've been looking for a way to emulate a sim card, like a soft sim solution, but it seem this is not easy..
Maybe it's time to let the old m7 retire...
Anyway, thanks to all contributors in this community, it's been awesome. Merry Christmas and a happy new year.
Click to expand...
Click to collapse
Maybe the sim card isn't making a good contact when inserted in the tray, A few ppl got a similar issue and used paper to shim the sim card (not recommended since your sim tray can get stuck). I would try another sim first...
alray said:
Maybe the sim card isn't making a good contact when inserted in the tray, A few ppl got a similar issue and used paper to shim the sim card (not recommended since your sim tray can get stuck). I would try another sim first...
Click to expand...
Click to collapse
Yes, that's a common issue. The first steps was to use a little tape on the sim, second step was to try another sim, third step was to open the device and take out the sim reader, clean it with ethanol, check every pin and so on, then I tried another sim reader, but the problem still remains.
I too have the same problem, of signal on and off. I think the device detected the SIM card as it asked for PIN to unlock. I tried the *#*#4636#*#* to choose WCDMA only / preferred, but still same problem. So, did you retire the beautiful phone of yours?
cryptosporidium said:
I too have the same problem, of signal on and off. I think the device detected the SIM card as it asked for PIN to unlock. I tried the *#*#4636#*#* to choose WCDMA only / preferred, but still same problem. So, did you retire the beautiful phone of yours?
Click to expand...
Click to collapse
Since not even replacing the sim reader solved the problem, it can no longer be used as a phone.
And anyway, the battery is getting seriously old, so when my dogs destroyed my remote control, the good old HTC one m7 now have a new life, filled with joy and happiness.
Anymote app is nice, and m7 are now a media control hub in my living room.
Since April 29 2013 this device have improved my life quality, with the good help from this great community on XDA.

Categories

Resources