Database Develop

Help !~ My O2IIs Bluetooth ...........

Help !~
My O2IIs Bluetooth when I turn on it and go to susupend(standby mode?!) around 5 min ,then I resume the OsIIs again but the bluetooth will be turn off and on .....that have a big problems when I"m using the handset and have incoming call ! The OsIIs is going to resume ..... then the handset will be disconnect (because the BT was turn off automatically)~~But any problem when I do it in 5 min !! ......and I'm sure is not my handset connection problem!!
How can I Sovle it??
Thx ~~

First thing I'd do is ugrade to the latest ROM - you are still using the older one. If you still have problems after that it may be worth going from BT3500 to 3900.
If you don't know how to do either of the above have a little search around the forum. The new ROM is on the O2 site and there are numerous postings about the 3500 to 3900 upgrade all over this forum.
R

rakh1 said:
First thing I'd do is ugrade to the latest ROM - you are still using the older one. If you still have problems after that it may be worth going from BT3500 to 3900.
If you don't know how to do either of the above have a little search around the forum. The new ROM is on the O2 site and there are numerous postings about the 3500 to 3900 upgrade all over this forum.
R
Click to expand...
Click to collapse
Don't bother. I have 3900 on my IIs and it still does the same thing.

Thanks for rakh1 and kevinnugent reply~~
In fact ,I tried to downlaod and upgrade the newest ROM form the O2 website ! but my O2IIs is not buy in UK ! so....
In the mean time ,I"m also "cooked" (crack?!.. I don't understand what difference on "cooked" and "crack",haha~) the ROM by the "XDA3nbtool",but have the error message on installation ,that show "Radio image file checksum Error ",when I replace the original radio image,that will show the other image file checksum error.....
And I contact the O2 Custom Center in HK ,but they ask me to contact the Singapore customer service ,and said "they just have a repair service only!they haven't technical support ! "
OMG!! haha...a sick joke !! :lol: :lol:
Finally,the Singapore Custom Center still haven't the solution about this problem !... they just send the "bluetooth BT3500 update patch " for me to try (haha!!...) it can solve this problem or not !!

I have the same problem about BT disconnection
I posted an item about the same problem two days ago...
And the "official" technical support did the same to me: send me the 3500 BT Stack (and I found it in the web and installed two weeks before. Great technical support!).
In fact it's frustrating: I need a car kit that works well for my job, but impossible with Qtek. So, if I want to have a hands free car kit...I must buy another phone?.
Incredible for an expensive machine like Qtek 9090.
I have'nt tryed for the sort of multiple patchs of 3900, but I have no faith in it.
I you find a solution, please let me know.
Good luck!.
j.m.

Hey ~I have the solution now?!~and I tried it a whole day~any problem!
Firstly You must stop the "Auto Power Off" Function on the O2IIs,then go to:
http://www.pocketgear.com/software_detail.asp?id=14621
to download the "screenlock" (software) and install it ,after the installation ,you will not have the icon on the “Program file “ (haha…may be the software bug),than go to “file exploroe” ->”My Device”->”Program files”->”screenLock”->”screenlock.exe”,When you run it the first time it will be create the icon on “program file”,If you want to leave it, press the button 1 and 4 (Calendar and Message button on the IIs) simultaneously! Now !the Bluetooth will be connected every time ~
but I still hoped the O2IIs announce the newest rom update for the Asia user soon……..
By the way, when updated the BT3500 ,the “auto resume” problem will be solve or not ??because I’m updated to BT 3900 still no change…..
Thx

Cangratulations Alextly!
ScreenLock works fine, and although this is like killing flyes with a bazooka, it's the only solution that I know about it, and this convert this solution in the better one.
The only question I've got now it's about power consumption. This program Locks (turns down) the screen but, if I understood well, with the screen locked the CPU is sitill gorking "underground", so the battery life can be reduced (I must do some proves).
As far as I know, the BT3500 doesn't solve the problem (I installed and it's the same). I ignore if the 3900 it does, but I'm afraid that it will not. I have not installed because the 3900 I've fount it's some sort of different patches that and they doesn't seem to be very reliable. So I prefer to wait for official Patche. And as says "kevinnugent" seems not to work.
Let's keep the faith for official technical service (my faith it's going down for minutes).
Thanks for you're finding and congratulations. I would never find this one.
j.m.

ScrrenLock
ScreenLock it's not as fantastic as I though: it shuts down the PDA automatically when you are in no-battery mode (for exemple when you're using TOMTOM), and increase battery consumption dramatically.
j.m.

Interesting... I don't seem to have the same symptoms with my SX66 paired with my SE HBH-300 and HCB-30 (car kit). When the SX66 goes into standby, the BT seems to stay connected. If it does disconect with either handsfree, I just press the call pick-up on the handsfree and it re-establishes the BT connection within 2-3 seconds.
I'm using 3900.
Ken

SX66
In fact I think the connection must not be disconnected. And with my Qtek if you have good luck and re-establish the in some way, maybe you will hear nothing...
My car kit it's Drive Blue from Parrot.
j.m.

I can't hear incoming calls...

I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom

This is an known issue in 1.40 ROMs, and currently there is no solution.

Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239

Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.

I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured

Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.

Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?

Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.

Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx

hi

I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!

Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.

I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??

Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings

Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).

What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards

srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )

So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q

does this problem remains in the WM5 ?

I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?

Supposed BT fix on ebay.

Hey, someone sent me this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5802839981
From first glance, it totally looks like a hoax. However, is it possible that someone figured out a way to rewrite the ROM to replace the BT stack?? And why would it require the IMEI number?? I have some serious doubts, but I'd like to hear some others informed opinnions.
-Chris

Looks like a hoax. They do have 99 feedback, but then that probably means someone probably just hacked their account. :roll:

Here is the main wording from the ad, it I notice that nobody has bought one of these yet so no feedback on whether it works. Why would it be emailed to the phone if it is a zip file, it would make more sense to send it by normal email. I think the imei may be a protection device to prevent you using the patch on other phones, the patch will probably work only with that specific imei number.
It's very simple to install this. Just include your your IMEI number from your Siemens Cingular SX66 in the notes field when you make the paypal payment and I will configure and email you a specific update for your phone. To lookup your IMEI, just type *#06# on your phone. When you get my update, unzip the file and upload it to your cell phone memory. use the folder/file viewer on the phone to click on the file. This will install the update. Then unplug your battery for a few seconds, plug it in again and your update will be complete. Then remove any bluetooth settings, delete any profiles, delete any paired BT devices and rescan and pair your BT headset. It's that simple. This update takes about 10 seconds normally. I have never seen any loss of data or any other errors due to this update

Here are some quotes from the Cingular forum (where I found about this patch) on this topic http://forums.cingular.com/cng/board/message?board.id=siemens&message.id=10667 (at the end of the page)
From the author: arikinthecity
It has nothing to do with the wireless.
I am selling a software update the I created for the SX66. The problem is not with the headset that you are buying. It is with the bluetooth software on the SX66. Siemens doesn't want to spend the time and money to fix the problem. They will not even discuss it. They don't care. The reason is that they don't sell enough. This model will be replaced with another model soon and Siemen's will just move on. So will Cingular. That's why I got sick and tired of waiting and I created an update.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5802839981
Now you can buy the same update and install it on your phone in a few minutes. I'm selling the update on ebay.
Click to expand...
Click to collapse
From the author: RonNatalie
OK, I'll bite. I've just sent you the $4.95 and my imei.
I'll report here what I've found.
Click to expand...
Click to collapse
From the author: RonNatalie
Well, I just installed it. As near as I can tell with my Jabra 250 earpiece, it makes no difference. The static is certainly still there. I am pretty convinced this isn't a 'software' issue anyhow.
Click to expand...
Click to collapse
From the author: arikinthecity
Well that's your opinion. I know that this update fixes the SX66. I have tested it on a few SX66 and it makes a world of difference. The only earpiece I recommend is the Motrolla HS820 earpiece. Jabra BT earpieces create problems with other cell phones so I don't recommend them for the SX66. Anyway for those of you who are interested, get my upgrade. If you feel that my efforts should not be rewarded for a small amount of $5 then enjoy using your SX66 plastered to your face. It doesn't work well with any wired earpiece because it needs a stereo 3 conductor plug. It doesn't work with any BT earpiece with the regular siemen's upgrade.
If you are angry at me, your anger is misguided. I am trying to find a solution. It's Siemens that is not updating this phone properly like Audiovox, Sprint, Orange, and other brands are. HTC gives the tools to update it. They just won't bother because it costs too much.
Have a great weekend everybody. If you still want to get the update, just follow the link in my previous posts.
Click to expand...
Click to collapse
From the author: RonNatalie
It's not an opinion. It's a fact. As I stated the JT250 doesn't work any better with your fix than it did before. Your unbiased and intelligent appriasal of the situation is indicated by your childish response. I was willing to blow the $5 to find out, but since you're going to insult me you can deal with the Paypal complaint.
The phone works fine with a wired earpiece. I don't know what you think the plug problem is. I have used it with my Noise Cancelling aviation headset.
Click to expand...
Click to collapse

There can be 2 methods how to do such a fix:
1. Buy a 1000$ SDK from Broadcomm, and make a fix. But in this case 5$ is a very little price for such work.
2. Extract the audiogw.dll from one of the extended ROMs and give this DLL as his own "fix". In this case he is taking money for a free update offered by some operator. Imate offered such an update some time ago, maybe he is selling this update.

Just post it here, I think the IMEI number is bull****.
It's a fix isn't it, what does that has to do with IMEI.
Let the guys here extract the fix to see what has changed.
Greetz,
[email protected] :?

I think Mamaich is correct....this smells...
Why does he need an IMEI number? This has NOTHING to do with BT. I think he is offering an existing upgrade that anyone can download and in the meantime make money (to make it look "real") and getting your IMEI number (so he can sell it, and make more cash).

I contacted the seller...
I described my configuration (see signature). He told me that I would not see any benefits and suggested that the patch is to an earlier configuration (actually told me not to buy it!).
He claimed the IMEI number was keyed into the copy protection scheme that he was using.
Bottom line: if you're keeping up with the updates on this board, there's probably no reason to shell out the 5 bucks on an upgrade you already have.

goestoeleven wheare can I get the upgrade you have?
It solve the BT problem?
I'm tired of looking oktions to use my bluetooth headset clearly...

I have no Bluetooth solution
it still stinks... until we get an upgraded build, we're stuck with static...
If you haven't already done so, check out the SX66 Standardization Project:
http://home.comcast.net/~sx66-blueangel/
This is probably the best you can do with what's available to us today... (waiting for WM2005)

If any of you have the problem that BT goes sleep mode and disconnects your headset, you may try this. It worked for me today. (note: this is only a workaround to prevent BT going sleep mode. This will not fix any of the BT distortion)
Click on the BT icon located at the bottom right of the today screen. Select BT Manager. Then, DON'T click on the X (Close) button of the BT Manager. Just click on the Start > Today icon. This will hide the BT Manager, but it will leave it running on the background (so this way it does not go in sleep mode). I tried this morning and my headset haven't disconnected in all day.
Hope it helps...

Just to summarise:
Tap on the BT Icon on bottom right, turn on BT, tap on the headset to activate then not click the "OK" on top right, instead "Start-Today" ??
Isn't working for me, tried it 10 times. Everytime I send the PDA into Standy and reactivate it and I tap on the BT icon it shows that the BT is not active.
daaaammmmnnnn... It looked soooo good the have a small solution for it.

Saisoku-R said:
Just to summarise:
Tap on the BT Icon on bottom right, turn on BT, tap on the headset to activate then not click the "OK" on top right, instead "Start-Today" ??
Isn't working for me, tried it 10 times. Everytime I send the PDA into Standy and reactivate it and I tap on the BT icon it shows that the BT is not active.
daaaammmmnnnn... It looked soooo good the have a small solution for it.
Click to expand...
Click to collapse
after I posted that, it had worked that entire day and the next. Then at one time I did a soft reset, and followed the same steps, but sometimes it turn off the BT. So it works... sometimes.

pulsorock said:
If any of you have the problem that BT goes sleep mode and disconnects your headset, you may try this. It worked for me today. (note: this is only a workaround to prevent BT going sleep mode. This will not fix any of the BT distortion)
Click on the BT icon located at the bottom right of the today screen. Select BT Manager. Then, DON'T click on the X (Close) button of the BT Manager. Just click on the Start > Today icon. This will hide the BT Manager, but it will leave it running on the background (so this way it does not go in sleep mode). I tried this morning and my headset haven't disconnected in all day.
Hope it helps...
Click to expand...
Click to collapse
I assume that you turn on the b/t first,correct? So, tap b/t icon>turn on b/t>start>today ??? Is this correct?
Thanks...........Later 8)

but it's a small step in the correct direction :wink:

WM5 Bluetooth A2DP
Just to share what I found...it may not be significant....
I Manage to see a Universal/O2 Exec proto device myself that Supports A2DP. It seems that MS Bluetooth Stack is not that crap afterall.
To use Bluetooth Stereo, the device has a shortcut under programs that says "Turn on Stereo HeadSet" and I have successfully paired the WM 5.0 device with my iTech S35 Stereo headset myself on the spot.
Anyway after what I saw I felt that this can be achieved on my BA WM5.
Hence, I started looking into the registry and started enabling the AudioGateway entries.......Suprise!!!! my iTech S35 was detected to have HeadSet Profile!!! But wat was missing was the Audio headset s/w......
oh yah bear in mind when I was trying the above my BA WM5 was without the "Headset today" patch.

PLEASE HEEELP!!!! NO SOUND on my BA on calls ... :(

I'm having the same problem for a week now...
I was on the street with my BA making calls and all went Ok. I use it for my work, so I do lots of calls a day. Suddenly, I realized, when I call, that the other can not hear me, nor can I hear them! The counter is running, the screen says "Connected". I haven't done anything to change the configuration, nor it have dropped it from my pocket.
I'¡m getting crazy. I don't know what I've done wrong.
Things tried unsuccessfully: Crying or Very sad
-Lots of device resets..... Between tryes and Updates.
- Reinstalled WM5 using a different ROM. Now I have TM 1.3. [http://forum.xda-developers.com/viewtopic.php?t=42632]
- Upgraded Radio to 1.15 (previously, I had 1.13)
- Used a Bluetooth headset. It worked, I could hear the sound from the phone, at least. Only thru the bluetooth headphone. Still, I could not hear any phone-sound from the loudspeaker when I turned off the headphone and the bluetooth headset were disabled, even with the Bluetooth signal ON, as suggested on other post. Each try with a new call. The weird thing is that I CAN hear the loudspeaker when I hear music or the system sounds... :?
- "Installed" the Unidirectional patch (copied the AudioGW.dll file over the old one successfully, reset, etc..)
- Turned off the device and leave it off for a while. Take off the SIM card, touch it (cosmic vibrations Embarassed) Sometimes, before, the SIM card went a little nuts if I resetted the device too much -maybe Confused- or if I got the battery off...
- Last, I've downgraded to the latest WM2003 ROM. Formatted the Storage Space and resseted the Registry Hive. No change. All else is working.
My options are finishing ....
Sorry if this has been posted before, but, at this point, when I've been tried almost (I think) everything, i couldn't find anything relevant using search.
Please, any help will be greatly appreciated!!! Maybe I can use at least a link to another thread..
Thanks

try downgrade your RADIO to 1.13

I've allready upgraded to 1.15 because of this problem. Anyway, I've downgraded just now and nothing same problem..... also: I can not get the handsfree-loudspeaker mode (pressing the "call" button for a while). Just nothing happens
Let's hope mamaich or other cracks read this post
Thanks for ur answer
indra9110 said:
try downgrade your RADIO to 1.13
Click to expand...
Click to collapse
HEEEEEEEEEEEEEEEELPPPPPPPPPPPPPPPP ((

ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO

Rom & Radio flashed again. At no avail
I've used, lastly, the "standard" Rom posted on I-mate website (www.clubimate.com) [ROM: 1.40.00 WWE; Radio: 1.12.00; Protocol: 1337.42], just to checkout and everything (regarding this problem) remains the same.
I've, however, noticed that, before, when I used the volume slider up, first the PDA-volume went up, later the phone-volume. Now it only fully moves up the PDA-volume. I think this have something to do...
Again: Please, help me!!!
Thanks for your answer!!
indra9110 said:
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Click to expand...
Click to collapse

Still the same after 3 flashing sessions
Two days ago, I've sent an e-mail to I-Mate. They have answered me yesterday telling me to hard-reset :?:evil: and if that doesn't work, to send the device to France or Portugal for fixing. Here on Spain there's no place where to send it.
I think it should be a software problem (maybe) that's why I'm asking help here.. Also, the problem with the volume slider up only occurs on W2003, not on WM5
What should I do??
Anyone?? HELLOO?

i've had this problem for a long time, and tried so many different patches non worked, but there is a way to deal with this issue u need to keep ur bluetooth on all da time or remove the file BTTrayCE from this directory
Mydevice>windows>start up
and copy this file to ur storage card if later u want to use ur Bluetooth so wat removing of this file does is that the icon in of bluetooth in tray bar will not appear automatically after u restart ur machine .
hope this helps

At no avail , but many thanks anyway.
I've seen this solution on other posts and I've tried it before. Without luck
Even the 'bluetooth on all the time' alternative. Without luck
Also, I'm now on TuMa 1.3 (WM5). The file relative to bluetooth on the startup folder is "BTIcon", wich I have moved as you stated. Without luck
Maybe the file you tell is for WM2003 ?? Could it be? Is the file named 'BTTrayCE' on WM2003 and 'BTIcon' on WM5?
I'm really desperate.
arran83 said:
i've had this problem for a long time, and tried so many ...
Click to expand...
Click to collapse

umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.

ok here is a patch that is supposed to fix this problem but hasn't worked on mine, i just attach it here it might work on urs, or u might already have used it.

Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone.
I had a similar problem sometime back, and just put the headphone jack in there, jiggled it a bit and it started working. basically released the switch. your symptoms point to a similar problem...does not have anything to do with Radio ROM. Has not given me problem since then

here you go..
http://forum.xda-developers.com/viewtopic.php?t=33207

Yup, I've seen this forum before. If it has to do with a headphone problem, then It shouldn't be heard anytime, and I CAN hear music and such from the device when it isn't in a call. Anytime I put the device on the "call" state (dialing, connected, hold, etc..) the sound goes out. :-S
So, it should not be a headphones problem.... should it??
deepakr said:
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone...
Click to expand...
Click to collapse

Yes, I will, for nth time... No solution yet... I will apply the Unidirectional patch again on WM2003 to see... Keep you posted..
arran83 said:
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
Click to expand...
Click to collapse

OK, I've tried, for nth time, going back to WM2003SE (112 T-Mobile) and applying the unidirectional patch I've found here (I think is the same posted on the I-mate site I've tested before) and NOTHING changes...
Still the same problem.
Any clues?

hi !
try like me... in bt setting-->accessibility-->disable all access options..
to me this little trick cut off every problems on use the phone....
hi

OK, I'll give a try :? (Again going to WM2003, as I think is that what you have right?)

No Sound on BA
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?

Re: No Sound on BA
I can not turn on the speakerpone.....
pjax said:
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Click to expand...
Click to collapse

I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.

Bluetooth Problem with Kaiser Please Help

Can anyone help me with this problem i just bought kaiser yesterday but i notice that i cant be able to receive any file transfer from a bluetooth connection.
However i can be able to beam file through bluetooth connection to another phone.
Can anyone help to solve this problem please?
thanks

Please be more specific, in order to get answers to your question. How your problems shows? Could it be just that other devices can not see your Kaiser, if so, then you have to tick checkbox "Make this device visible to other devices" on bluetooth settings.
--
Mika

As per the last post, your device has to be set to 'Visible' in BT settings and if you want your device 'Open' to receive all beams the uncheck the box in BT settings under 'Security'

There is another setting to check.
Under Start\Settings\Connections there is an icon labelled "Beam". Click this and make sure the box labelled "Allow incoming beams" is ticked. (Not sure about the exact wording but it is the only checkbox on the screen.)

And whilst we're on the subject of ticking boxes....
I'm pretty sure the two boxes under the FTP tab in the bluetooth setting need to be ticked aswell...Could there BE anymore boxes to tick for 1 simple operation?!

Similar Issues
I am having similar issues, but a bit more severe. Kaiser wont see my laptop that has a USB bluetooth dongle. It can see my bluetooth headset just fine. But it refuses to see my desktop and my desktop refuses to see it. Any suggestions
JKO

jack_b_uta said:
I am having similar issues, but a bit more severe. Kaiser wont see my laptop that has a USB bluetooth dongle. It can see my bluetooth headset just fine. But it refuses to see my desktop and my desktop refuses to see it. Any suggestions
JKO
Click to expand...
Click to collapse
This sounds like a problem with your laptop/dongle, if your kaiser is able to see other things...

What rom are you using? I was using alex's rom for a while but he some how removed the ftp tab in the bluetooth settings and I was never able to receive any files. I switched over to sleuth's rom and it fixed all my problems.

kinktao said:
What rom are you using? I was using alex's rom for a while but he some how removed the ftp tab in the bluetooth settings and I was never able to receive any files. I switched over to sleuth's rom and it fixed all my problems.
Click to expand...
Click to collapse
It's the same in Dutty's new ROM. The FTP tab is gone, and now I (and a few other people) can't send/receive via bluetooth.

Technical intervention is required here ...
I'm facing the exact same problem with my TyTn 2, but here are some spacifics that require an expert's opinion...
1. The device sends perfectly...
2. When it comes to recieving, here's the low-down:
-I tried sending a pairing req. from my computer (through my BT dongle) & the phone received the req.
-After the pair, the computer sent & the device received (no problem until now)...
-I tried sending another file (from my Nokia 6300) & there was no response from my phone...
-I tried sending from a Nokia 6260, the phone received without even the need to pair!!!
What I want to know is the technical reason for this to happen???
P.S.
Here are the options set on my device:
-Receive all incoming beams (Checked)
-Turn on BT (Checked)
-Make this device visible to other devices (Checked)
-Authentication (Passkey) required (Unchecked)

I think it would be a whole lot easier if you just packed your phone up and sent it to me. I would uh, take care of it for you.

Bluetooth beam fixed
You have to fix bluettooth with this cab
http://forum.xda-developers.com/attachment.php?attachmentid=69625&d=1202484170
after fixed make soft reset and bingo!!
k101d

Thanks alot k101d for the quick response, but as I'm quite skeptical when it comes to messing around with my phone's internal configuration or registry files & so on, I would like to know the source from which you got the .CAB file, & what it exactly does (on the inside of course)...
Many thanks again, dude...

Oh, thanks a lot k101d.
Till today I was so dissapointed with this BT of mine (it costs about 100 €).
It worked !!!

Yo costas2by4AIO,
sorry if I'm gonna be bothering you, but bare with me & my desperate questions...
What exactly were you suffering (concerning BT) from before applying the .CAB file, & what was the result that satisfied you?

Hi Guys,
Need Help......
I am not able to beam more than one file altogether with my HTC tytn II
Please help me to figure out, How can I beam files altogether to other Bluetooth device instead of one by one.
Thanks,

k101d said:
You have to fix bluettooth with this cab
http://forum.xda-developers.com/attachment.php?attachmentid=69625&d=1202484170
after fixed make soft reset and bingo!!
k101d
Click to expand...
Click to collapse
I can't download this .CAB file any more ........anyone could help?
Or any way to fix my bluetooth problem.
I can not send or receive file with another PPC or even my computer.........

Please someone help
I do have the same problem. I can't send or receive files (contacts, video, photo, music, ringtones) from other phones.
Already tried HTC patchs, but no solution at all.
Tried to download that file, but the link is not availlable. Can someone post the file again or have another solution ?