Hey, someone sent me this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5802839981
From first glance, it totally looks like a hoax. However, is it possible that someone figured out a way to rewrite the ROM to replace the BT stack?? And why would it require the IMEI number?? I have some serious doubts, but I'd like to hear some others informed opinnions.
-Chris
Looks like a hoax. They do have 99 feedback, but then that probably means someone probably just hacked their account. :roll:
Here is the main wording from the ad, it I notice that nobody has bought one of these yet so no feedback on whether it works. Why would it be emailed to the phone if it is a zip file, it would make more sense to send it by normal email. I think the imei may be a protection device to prevent you using the patch on other phones, the patch will probably work only with that specific imei number.
It's very simple to install this. Just include your your IMEI number from your Siemens Cingular SX66 in the notes field when you make the paypal payment and I will configure and email you a specific update for your phone. To lookup your IMEI, just type *#06# on your phone. When you get my update, unzip the file and upload it to your cell phone memory. use the folder/file viewer on the phone to click on the file. This will install the update. Then unplug your battery for a few seconds, plug it in again and your update will be complete. Then remove any bluetooth settings, delete any profiles, delete any paired BT devices and rescan and pair your BT headset. It's that simple. This update takes about 10 seconds normally. I have never seen any loss of data or any other errors due to this update
Here are some quotes from the Cingular forum (where I found about this patch) on this topic http://forums.cingular.com/cng/board/message?board.id=siemens&message.id=10667 (at the end of the page)
From the author: arikinthecity
It has nothing to do with the wireless.
I am selling a software update the I created for the SX66. The problem is not with the headset that you are buying. It is with the bluetooth software on the SX66. Siemens doesn't want to spend the time and money to fix the problem. They will not even discuss it. They don't care. The reason is that they don't sell enough. This model will be replaced with another model soon and Siemen's will just move on. So will Cingular. That's why I got sick and tired of waiting and I created an update.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5802839981
Now you can buy the same update and install it on your phone in a few minutes. I'm selling the update on ebay.
Click to expand...
Click to collapse
From the author: RonNatalie
OK, I'll bite. I've just sent you the $4.95 and my imei.
I'll report here what I've found.
Click to expand...
Click to collapse
From the author: RonNatalie
Well, I just installed it. As near as I can tell with my Jabra 250 earpiece, it makes no difference. The static is certainly still there. I am pretty convinced this isn't a 'software' issue anyhow.
Click to expand...
Click to collapse
From the author: arikinthecity
Well that's your opinion. I know that this update fixes the SX66. I have tested it on a few SX66 and it makes a world of difference. The only earpiece I recommend is the Motrolla HS820 earpiece. Jabra BT earpieces create problems with other cell phones so I don't recommend them for the SX66. Anyway for those of you who are interested, get my upgrade. If you feel that my efforts should not be rewarded for a small amount of $5 then enjoy using your SX66 plastered to your face. It doesn't work well with any wired earpiece because it needs a stereo 3 conductor plug. It doesn't work with any BT earpiece with the regular siemen's upgrade.
If you are angry at me, your anger is misguided. I am trying to find a solution. It's Siemens that is not updating this phone properly like Audiovox, Sprint, Orange, and other brands are. HTC gives the tools to update it. They just won't bother because it costs too much.
Have a great weekend everybody. If you still want to get the update, just follow the link in my previous posts.
Click to expand...
Click to collapse
From the author: RonNatalie
It's not an opinion. It's a fact. As I stated the JT250 doesn't work any better with your fix than it did before. Your unbiased and intelligent appriasal of the situation is indicated by your childish response. I was willing to blow the $5 to find out, but since you're going to insult me you can deal with the Paypal complaint.
The phone works fine with a wired earpiece. I don't know what you think the plug problem is. I have used it with my Noise Cancelling aviation headset.
Click to expand...
Click to collapse
There can be 2 methods how to do such a fix:
1. Buy a 1000$ SDK from Broadcomm, and make a fix. But in this case 5$ is a very little price for such work.
2. Extract the audiogw.dll from one of the extended ROMs and give this DLL as his own "fix". In this case he is taking money for a free update offered by some operator. Imate offered such an update some time ago, maybe he is selling this update.
Just post it here, I think the IMEI number is bull****.
It's a fix isn't it, what does that has to do with IMEI.
Let the guys here extract the fix to see what has changed.
Greetz,
[email protected] :?
I think Mamaich is correct....this smells...
Why does he need an IMEI number? This has NOTHING to do with BT. I think he is offering an existing upgrade that anyone can download and in the meantime make money (to make it look "real") and getting your IMEI number (so he can sell it, and make more cash).
I contacted the seller...
I described my configuration (see signature). He told me that I would not see any benefits and suggested that the patch is to an earlier configuration (actually told me not to buy it!).
He claimed the IMEI number was keyed into the copy protection scheme that he was using.
Bottom line: if you're keeping up with the updates on this board, there's probably no reason to shell out the 5 bucks on an upgrade you already have.
goestoeleven wheare can I get the upgrade you have?
It solve the BT problem?
I'm tired of looking oktions to use my bluetooth headset clearly...
I have no Bluetooth solution
it still stinks... until we get an upgraded build, we're stuck with static...
If you haven't already done so, check out the SX66 Standardization Project:
http://home.comcast.net/~sx66-blueangel/
This is probably the best you can do with what's available to us today... (waiting for WM2005)
If any of you have the problem that BT goes sleep mode and disconnects your headset, you may try this. It worked for me today. (note: this is only a workaround to prevent BT going sleep mode. This will not fix any of the BT distortion)
Click on the BT icon located at the bottom right of the today screen. Select BT Manager. Then, DON'T click on the X (Close) button of the BT Manager. Just click on the Start > Today icon. This will hide the BT Manager, but it will leave it running on the background (so this way it does not go in sleep mode). I tried this morning and my headset haven't disconnected in all day.
Hope it helps...
Just to summarise:
Tap on the BT Icon on bottom right, turn on BT, tap on the headset to activate then not click the "OK" on top right, instead "Start-Today" ??
Isn't working for me, tried it 10 times. Everytime I send the PDA into Standy and reactivate it and I tap on the BT icon it shows that the BT is not active.
daaaammmmnnnn... It looked soooo good the have a small solution for it.
Saisoku-R said:
Just to summarise:
Tap on the BT Icon on bottom right, turn on BT, tap on the headset to activate then not click the "OK" on top right, instead "Start-Today" ??
Isn't working for me, tried it 10 times. Everytime I send the PDA into Standy and reactivate it and I tap on the BT icon it shows that the BT is not active.
daaaammmmnnnn... It looked soooo good the have a small solution for it.
Click to expand...
Click to collapse
after I posted that, it had worked that entire day and the next. Then at one time I did a soft reset, and followed the same steps, but sometimes it turn off the BT. So it works... sometimes.
pulsorock said:
If any of you have the problem that BT goes sleep mode and disconnects your headset, you may try this. It worked for me today. (note: this is only a workaround to prevent BT going sleep mode. This will not fix any of the BT distortion)
Click on the BT icon located at the bottom right of the today screen. Select BT Manager. Then, DON'T click on the X (Close) button of the BT Manager. Just click on the Start > Today icon. This will hide the BT Manager, but it will leave it running on the background (so this way it does not go in sleep mode). I tried this morning and my headset haven't disconnected in all day.
Hope it helps...
Click to expand...
Click to collapse
I assume that you turn on the b/t first,correct? So, tap b/t icon>turn on b/t>start>today ??? Is this correct?
Thanks...........Later 8)
but it's a small step in the correct direction :wink:
WM5 Bluetooth A2DP
Just to share what I found...it may not be significant....
I Manage to see a Universal/O2 Exec proto device myself that Supports A2DP. It seems that MS Bluetooth Stack is not that crap afterall.
To use Bluetooth Stereo, the device has a shortcut under programs that says "Turn on Stereo HeadSet" and I have successfully paired the WM 5.0 device with my iTech S35 Stereo headset myself on the spot.
Anyway after what I saw I felt that this can be achieved on my BA WM5.
Hence, I started looking into the registry and started enabling the AudioGateway entries.......Suprise!!!! my iTech S35 was detected to have HeadSet Profile!!! But wat was missing was the Audio headset s/w......
oh yah bear in mind when I was trying the above my BA WM5 was without the "Headset today" patch.
Related
PLS forget this, after use BT head set several time, the same problem had been happened! Sorry about this!
BT Head set problem of un-resume with incomming call when the device is suspending. how to fix!
@;Download XDA2s_1-12-178-WWE_UK_Extended_ Rom.zip from below.
http://forum.xda-developers.com/viewtopic.php?t=13072
@And extract the zip and find BA_OEM_PD_BT_Headset.sa.CAB
@Copy&Past BA_OEM_PD_BT_Headset.sa.CAB into Blue Angel and tap it to install.
@Make worm reboot and you can already finish work for replacement the new version of BtCEStack.dll (V1.604)
@@@You can also download same CAB file (but i renamed to BT_Headset.cab) from http://www.asukal.jp/BT_Headset.CAB
Now Blue Angel had became the All Mighty Machine!!!! Enjoy it!
you can see same summary on my Blog
http://asukal.seesaa.net/article/1182756.html
Also you can see how to get the missing function of dial network client service on BlueAngel (replacment of the BTWIzardPrifile.dll)
http://asukal.seesaa.net/article/1031857.html
Attention for this thread
PLS forget this,
after use BT head set several times, the same problem had been happened!!
(sometimes effective,but sometimes not effective,also sometimes auto resume the device.not sure it`s side effect or natural function of this patch)
If you want to try this, plese dont forget it is your own lisk!
------------------------------------------------------------------------------
*for The Guys who already installed and wishes to uninstall due to some side effect. You must delete them manually with following steps.
@If you are using BT function, please turn off the BT, and make worm reboot it.
@Connect IIs to PC with Activesync, and use PC explore (Or use failer which can access dinamic librallies on IIs)and find following 3 files in the windows folder of IIs.
BTAudioGW.dll
BtCeStack.dll
HFPUI.exe
@Rename them to the names to eazy find them in next step（Example;"a" or "1", and make worm reboot again, then you can delete it. You can not delete those 3 files without rename. They were untachable.
@Make it worm reboot again. it have finished already and return to the default!
has anyone found this to work?
Has this worked for anyone? This is the biggest problem with the PDA2K...
Didn't work for me. This BT Headset problem really is a pain.
We were all looking for a solution to the voice dialling problem with the BT Headset on the XDAII and there's no solution to that.
Now a year on, a new 'improved?' model and to cap it all there's no solution to even getting a reliable BT Headset connection!
Now new test of solution
http://asukal.seesaa.net/article/1204039.html
Please watch my test!!!! but i am still not sure for myself!
Somebody please post your result with OzBT
Now my bluetooth head set still working with this ozBT.
But i think my result can't say it all for you,guys.
if somebody tried this, pls post your result, worked or not! Please.
After 3 days test, its workable for ME
PLease see folowing new report! seems to be workable!
http://asukal.seesaa.net/article/1219842.html
BT headset problem
Thanks vey much for all this work trying to resolve this Blue Tooth problem. However, as a newbie with my Tmobile MDAIII, where can I get official upgrade files, ROMs, etc. unless it is only from this site? In other words,
is there a Blue Angel support site in English anywhere?
Thanks!
I follow instruction of Asukal and now BT headset are usable after standby of pda2k.
Now the only problem I have are that sometimes ppc wake up without motivation. the problem was present also before use ozbt and O2 patch.
Thank you Asukal!
BT headset problem
I've tried and it works fine with jabra 250 and kondor bt 25.
Thanks Asukal you solved my big big problem.
Thanks Again :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Re: After 3 days test, its workable for ME
Asukal said:
PLease see folowing new report! seems to be workable!
http://asukal.seesaa.net/article/1219842.html
Click to expand...
Click to collapse
Sure it did Asukal :lol: , don't know what to say,
thaaaaaaaaaaaaaaaank youuuuuuuuu
works great on my Qtek-9090
good work :wink:
thanks guys!
Appreciated your posting, guys!
since my last post, noboday reported my work was usefull or not.
i have been afraid i am about to become a faker! :wink:
And glad to hear that was worked for you guys!
But please do not forget, sometimes suddenly fail to reconize BT head set.
, then you can re-detect it again, you can use it again.
Do not panish me if that time come please <very little probablity>
Answer to the Mr,Guest>
@this blue tooth patch was downloaded from this forum
@you had better not to inquire anything to the XdaO2IIs support center, they are not specialized mechanics for the PDA, but just a mobile phone serveice center, they will replay you with quite different solutions to your question, it make you worth. this is my suggestion.
Mr,ilvanni> auto wake up without any motivate.
Yes i knew it, but it was not coz of OzBT, but coz of BT patch. before i tried OzBT, it also happened with BT patch. Hope you watch the battery.
--------------other way of solution for this--------------------------
Some Thailand Guy said, use the softoware to turn off the screen(but the windows is runnning), works for this BT head set problem, too.
You can try this,too. (i forget to the name of soft---may be "Screen OFF" or something like that.)
but sorry i didnt try this. need much more attention for the battery.
Re: After 3 days test, its workable for ME
Hi Guys,
I'm a bit new to this pocket pc business. I can see where your coming from, but when I try this my screen, particularly the Todat screen, wont refresh properly, ie you cant read it!
Any ideas?
Sorry i cant catch what you want to say exactly,i guess two situations.
#1;Does it mean today plug-in soft were can`t be appeared aftre wake up?<with using ozBT>
On IIs(or PPC2003) has some non-conpatible with the previouse version of Today Plugs-in Soft<World Today, tAgenda, or exToday,etc>
#2;or does it mean IIs can`t return to windows? some like freeze with susspend? if this case, i have no exipierience about that yet. sorry.
Sorry for not being clear!
What I am saying is that the video display of the "Today Program" ie the start up screen is corrupt. Any window, such as the Bluetooth driver message, stays on the screen. When you press the start button it appears on top of this and the display is corrupt. The device is still working anbnd clicking an any "full screen" application displays normally. The Today screen remains corrupt when you return to it.
Anonymous said:
Sorry for not being clear!
What I am saying is that the video display of the "Today Program" ie the start up screen is corrupt. Any window, such as the Bluetooth driver message, stays on the screen. When you press the start button it appears on top of this and the display is corrupt. The device is still working anbnd clicking an any "full screen" application displays normally. The Today screen remains corrupt when you return to it.
Click to expand...
Click to collapse
Switching the Today background to something else, them back again, sorted this for me.
Today programs disapear
Now i got it.
i think it was coz of the New OS, even without those patch, some times happen to me.Or memory condition. Blue Angel lost memory very quick and be stacked easly(too much devise resources--wi-fi,bluetooth,keyboadm many hard bottms--- used i think)
(Himala upgraded with 2003Se is better)
the solution fo this,Mr,Sparkeyxda has right answer, i also try to open option----today---and off/on today plugs in, then return to today. they will come again.
I think it coz of un-compatible of old today programs.
So this moment, i gave up use some of Today programs.
sorry if someboday have better solution, please tell him!
I had the same problem and changing the theme back and forth like sparkyxda solved it for me.
is this worth trying on QTEK9090 ?
The bluetooth problem on 9090 is that whoever calls 9090-user wih BT headset, will hear him/herself really well.. it is as if the audio that is suppoed to get to 9090-user-ear *also* is sent back as if that was somthing 9090 used said. very clear audio loopback
Hi Akusal i wonder if you are working to solve the BT hands free problem & if you need anyhelp testing devices or SW i can do that
I'm having a problem when someone calls, I can't hear them but they can hear me. Once I soft reset, everything's peachy. Just today I used my phone (pda2k with i-mate 1.40 rom) several times. Everything was fine. I turned the flight mode a couple times today. Then, I turned on flight mode, let the phone sit for a while and had an incoming call...I couldn't hear them. I told them to call back in 5 minutes. I tried calling another number but couldn't hear anything, did a reset and everything was fine.
This has happened before and after the 1.40 upgrade. Anyone have any reason why?? I've tried turning the flight mode off and back on, but that didn't help either.
Thanks,
Tom
This is an known issue in 1.40 ROMs, and currently there is no solution.
Dont blame ROM 1.40 because you also face this problem when using ROM 1.31
No solution so far but a trick's available here: http://forum.xda-developers.com/posting.php?mode=reply&t=22239
Solution
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
I don't know if this can help to solve the problem but I wanted to mention that I never had this problems when I was using vodafone, but after I changed the sim card this probleme occured
Solution
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Re: Solution
asim_ag said:
The Solution is TURN ON your BLUETOOTH and then TURN OFF your bluetooth.
Click to expand...
Click to collapse
Unfortunately for me this actually triggers the no sound issue! My device is fine until the first time I use bluetooth then I can almost 100% guarantee that the next call will be silent.
As stated before with the 1.40.00 rom, this issue is certainly linked to the Bluetooth driver, perhaps on use it is switching audio to their driver for headset use and not restoring it?
Are you using sbp Plus, because this application has issue with bluetooth. Try to close all application not to minimize them when you are done with it. Use PocketNav or Magic Button for that.
Re: Solution
ThExSenatoR said:
Delete Run_BTTrayCE_10.lnk from your Windows\Startup folder and soft reset. Now you wont have the BT icon on the tray bar, but you wont have the no sound problem. If you still need bluetooth you can start it from the Windows directory as BTTrayCE.lnk.
Have fun.
Click to expand...
Click to collapse
Can you tell me if the BT has to be started like you described when you use Tom Tom? Normaly Tom Tom starts the BT automaticaly when it starts. Thanxx
hi
I get this problem a lot when I've had the phone on silent or vibrate and then change it back. I think it mainly happens when I receive a call after this rather than make an outgoing one but after the 1st call even outgoing ones have no sound.
It sounds daft but after a couple of months where I reset whenever it happened I just by chance hit the volume slider & sure enough the in call volume was turned right down. It's worth checking as it's an easy fix for me!!
Kill process
The solution for the problem could be to not run the BT driver. Anyway it's possible to delete from startup the dirver and to run when it need (for GPS or headset...).. But is there a way to kill the BT process without reset the machine (that without BT in the startup does't run the driver) whit a simple "TAP" ?
Thanx... M.
I hope I put my Reply on the right forum, but however...
I recently bought a QTEK9090 via Ebay and also I have the "I can't hear incoming calls..." problem.
Radio 1.06.02 and ROM 1.22.ooWWE. I understand from the postings in this forum that only a few (approx 10 to 15) have a problem and the rest of the world does NOT.
Strange but due to this I am really thinking to replace it by a P910I, as a phone should be able to pick-up calls. I haven't decided because the 9090 is a great machine.
Doesn't anybody have a clue, even not the manufacturer ??
Hi,
i had the same problem. Than i followed the advice above from someone deleting the autostart BT and using the btray.lnk instead. Absolutely fine since then.
greetings
Using the XDA IIs.
Until we get a proper fix, I am using the manual Run_BTTray method to turn on the BT if I need to use my headset.
So what I do is, (a) normally, no BT tray, (b) to use my BT headset, use Run_BTTray to turn on BT tray, (c) use ATBluetooth to actually turn on and off the BT radio, and finally (d) soft-reset to remove the BT Tray when I'm done.
I know it sounds complicated, but is ok after I assign the commands to my buttons (XDA IIs, plenty of buttons!).
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
srmz said:
What about the pda2k UniDirectional Patch.sa.cab available on the clubimate site.
I had this problem with ROM 1.40 as well as with the previous ROM. I have installed this patch. I have not had this unidirectional problem since then but I am not sure if this will work in the longer term as I have installed the upgraded ROM and the patch only a few days from now.
Love to hear comments of other members who have tried this patch.
Kind Regards
Click to expand...
Click to collapse
The patch works.... atleast I didnt get the no voice problem after the patch (touch wood :twisted: )
So, I've been searching, and this may be covered, but I seem to have the problem in REVERSE. I can hear the other party when using my BT headset, but they can't hear me! On one call, it'll work, then on another, it won't, and then it'll stop working. I have ROM v.1.40.00 and Radio 1.13.00 I don't know what I could do to fix this problem...
Any suggestion would be appreciated...Although I'm not keen about removing the BT tray from the startup, only to soft reset just to remove it...
Thanks,
Q
does this problem remains in the WM5 ?
I wouldn't know...I'm still on WM2003SE....BTW, I have a Siemens SX66.... Anyone? Please?
I'm having the same problem for a week now...
I was on the street with my BA making calls and all went Ok. I use it for my work, so I do lots of calls a day. Suddenly, I realized, when I call, that the other can not hear me, nor can I hear them! The counter is running, the screen says "Connected". I haven't done anything to change the configuration, nor it have dropped it from my pocket.
I'¡m getting crazy. I don't know what I've done wrong.
Things tried unsuccessfully: Crying or Very sad
-Lots of device resets..... Between tryes and Updates.
- Reinstalled WM5 using a different ROM. Now I have TM 1.3. [http://forum.xda-developers.com/viewtopic.php?t=42632]
- Upgraded Radio to 1.15 (previously, I had 1.13)
- Used a Bluetooth headset. It worked, I could hear the sound from the phone, at least. Only thru the bluetooth headphone. Still, I could not hear any phone-sound from the loudspeaker when I turned off the headphone and the bluetooth headset were disabled, even with the Bluetooth signal ON, as suggested on other post. Each try with a new call. The weird thing is that I CAN hear the loudspeaker when I hear music or the system sounds... :?
- "Installed" the Unidirectional patch (copied the AudioGW.dll file over the old one successfully, reset, etc..)
- Turned off the device and leave it off for a while. Take off the SIM card, touch it (cosmic vibrations Embarassed) Sometimes, before, the SIM card went a little nuts if I resetted the device too much -maybe Confused- or if I got the battery off...
- Last, I've downgraded to the latest WM2003 ROM. Formatted the Storage Space and resseted the Registry Hive. No change. All else is working.
My options are finishing ....
Sorry if this has been posted before, but, at this point, when I've been tried almost (I think) everything, i couldn't find anything relevant using search.
Please, any help will be greatly appreciated!!! Maybe I can use at least a link to another thread..
Thanks
try downgrade your RADIO to 1.13
I've allready upgraded to 1.15 because of this problem. Anyway, I've downgraded just now and nothing same problem..... also: I can not get the handsfree-loudspeaker mode (pressing the "call" button for a while). Just nothing happens
Let's hope mamaich or other cracks read this post
Thanks for ur answer
indra9110 said:
try downgrade your RADIO to 1.13
Click to expand...
Click to collapse
HEEEEEEEEEEEEEEEELPPPPPPPPPPPPPPPP ((
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Rom & Radio flashed again. At no avail
I've used, lastly, the "standard" Rom posted on I-mate website (www.clubimate.com) [ROM: 1.40.00 WWE; Radio: 1.12.00; Protocol: 1337.42], just to checkout and everything (regarding this problem) remains the same.
I've, however, noticed that, before, when I used the volume slider up, first the PDA-volume went up, later the phone-volume. Now it only fully moves up the PDA-volume. I think this have something to do...
Again: Please, help me!!!
Thanks for your answer!!
indra9110 said:
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Click to expand...
Click to collapse
Still the same after 3 flashing sessions
Two days ago, I've sent an e-mail to I-Mate. They have answered me yesterday telling me to hard-reset :?:evil: and if that doesn't work, to send the device to France or Portugal for fixing. Here on Spain there's no place where to send it.
I think it should be a software problem (maybe) that's why I'm asking help here.. Also, the problem with the volume slider up only occurs on W2003, not on WM5
What should I do??
Anyone?? HELLOO?
i've had this problem for a long time, and tried so many different patches non worked, but there is a way to deal with this issue u need to keep ur bluetooth on all da time or remove the file BTTrayCE from this directory
Mydevice>windows>start up
and copy this file to ur storage card if later u want to use ur Bluetooth so wat removing of this file does is that the icon in of bluetooth in tray bar will not appear automatically after u restart ur machine .
hope this helps
At no avail , but many thanks anyway.
I've seen this solution on other posts and I've tried it before. Without luck
Even the 'bluetooth on all the time' alternative. Without luck
Also, I'm now on TuMa 1.3 (WM5). The file relative to bluetooth on the startup folder is "BTIcon", wich I have moved as you stated. Without luck
Maybe the file you tell is for WM2003 ?? Could it be? Is the file named 'BTTrayCE' on WM2003 and 'BTIcon' on WM5?
I'm really desperate.
arran83 said:
i've had this problem for a long time, and tried so many ...
Click to expand...
Click to collapse
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
ok here is a patch that is supposed to fix this problem but hasn't worked on mine, i just attach it here it might work on urs, or u might already have used it.
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone.
I had a similar problem sometime back, and just put the headphone jack in there, jiggled it a bit and it started working. basically released the switch. your symptoms point to a similar problem...does not have anything to do with Radio ROM. Has not given me problem since then
here you go..
http://forum.xda-developers.com/viewtopic.php?t=33207
Yup, I've seen this forum before. If it has to do with a headphone problem, then It shouldn't be heard anytime, and I CAN hear music and such from the device when it isn't in a call. Anytime I put the device on the "call" state (dialing, connected, hold, etc..) the sound goes out. :-S
So, it should not be a headphones problem.... should it??
deepakr said:
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone...
Click to expand...
Click to collapse
Yes, I will, for nth time... No solution yet... I will apply the Unidirectional patch again on WM2003 to see... Keep you posted..
arran83 said:
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
Click to expand...
Click to collapse
OK, I've tried, for nth time, going back to WM2003SE (112 T-Mobile) and applying the unidirectional patch I've found here (I think is the same posted on the I-mate site I've tested before) and NOTHING changes...
Still the same problem.
Any clues?
hi !
try like me... in bt setting-->accessibility-->disable all access options..
to me this little trick cut off every problems on use the phone....
hi
OK, I'll give a try :? (Again going to WM2003, as I think is that what you have right?)
No Sound on BA
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Re: No Sound on BA
I can not turn on the speakerpone.....
pjax said:
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Click to expand...
Click to collapse
I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.
I suspect this is as close to the perfect ROM as I can make for you folks, until I find something else universally useful to add..
This ROM has the following characteristics:
-Based on QTek 2.17.7.102
-OS 5.1.195 Build 1487.2.0.0
-Radio 02.07.10
-Protocol 412.1.03
-Includes assorted ringers, themes, OmapClock, and yes, A2DP
- .NET Compact Framework is integrated. It is build 2.0.5238.0
- .NET Compact Framework 1 has been left in. Build 1.0.4292.2
-Did I mention it has A2DP integrated?
-It is not coded to a specific carrier, so theoretically you shouldn't have to CID unlock. HOWEVER, I ask, no, I demand that you CID unlock before installing. Only then will you be allowed to grovel in the forum for help if you run into problems achieving a successful flash.
-Each morning at 7am it will gently vibrate, go start the coffee maker, fetch the newspaper, feed the dogs, and start your bath. Should you leave it at home it's likely to cuddle with your wife...it has no loyalties.
It can be found here until it gets moved:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP.exe
If anyone asks me to make this ROM using 2.08 I'll send my legions of monkeys to harass and belittle you in public.
Thanks man, this is kick ass.
MY HERO!
Dude, you ROCK!!! You have made my decision to get this phone more and more worth it. Thanks again!
A2DP Not Working
So, I CID Unlocked and installed this new ROM successfully. Then I went to the connections screen and enabled bluetooth. Opened up Bluetooth Settings and created a new partnership with my Moto HT820. Went through all the normal steps and it found Hands Free and Wireless Stereo services on my headphones device. I saved the settings.
In 2.08/2.87, at this point I would press the right ear button, which would activate Wireless Stereo mode and I would see a music icon in the top bar. It didn't happen on this new ROM. Another method is to go back to the Bluetooth settings and click&hold on the device and you see a list of services (Hands Free and Wireless Stereo) and then choose Wireless Stereo. On this new ROM, only Hands Free is listed. If I choose to edit the device, it lists that Wireless Stereo is supported on the headphones, but it is not available as a mode on the phone.
I will be going back to 2.08/2.87 for now. Let me know If you happen to figure out what's might be going on.
Thanks!
Hey Summiter .... canyou? .... are you going to? .... I need? .... would you? .... nevermind can't think of anything
A2DP not working with HT820
I've successfully flashed this ROM and tried to pair Motorola HT820 headset but it was not recognized as Wireless Stereo. It was recognized like Hands-free only.
Anyone knows how to make it work? Thanks
Does this ROM still have the issue where the device won't vibrate from standby?
Also... for those of us just tuning in...
What's the benefit of having additional components (like CF) loaded through the extended ROM? When they're installed, will they live in ROM instead of taking up precious storage space? Or is it just the convenience of having everything install from one place?
Maybe Voice Commander in the next release...?
the non-vibrate thing is part of the rom, as MS made it that way. and voice command isn't free, so i doubt he'd include it in the rom.
amg212 said:
Does this ROM still have the issue where the device won't vibrate from standby?
Also... for those of us just tuning in...
What's the benefit of having additional components (like CF) loaded through the extended ROM? When they're installed, will they live in ROM instead of taking up precious storage space? Or is it just the convenience of having everything install from one place?
Maybe Voice Commander in the next release...?
Click to expand...
Click to collapse
CF goes to main memory regardless of the settings you choose at installation (you can choose Storage Card >>> it installs w/o error message to main memory).
You can see the appropriate files in the \windows directory. They all start with GACxxxx.
Cheers
hrb
Good Stuff...
One question though. Does this still have the battery indicator moved to the top. I just flashed yesterday without issue but I'm thinking the battery indicator can be optioned. Obviously this is a miniscule issue compared to the other great work you've done. Thanx guy.
J
the battery icon at the top is part of the AKU2.
darkjedi said:
the non-vibrate thing is part of the rom, as MS made it that way. and voice command isn't free, so i doubt he'd include it in the rom.
Click to expand...
Click to collapse
I was talking about Voice Commander - not MSVC
Oi Vey!
I'm all settled in on v2.87. everything works, wifi, a2dp, btaudio e.g.
What extras is this going to buy me??
Maybe I'll hold off for a little longer.
Still, thumbs up to Summiter. :wink:
as much as a pain in the ass it is, the 2.17 rom with A2DP is MUCH more stable than the test rom.
Hi Summiter,
I'm set to receive my 8125 this week. I've been doing as much reading and bookmarking as I can until I have the phone in my hands, but I haven't seen this question posted yet.
When a user loads your ROM, does the phone start at the beginning of the customization process (setting time zones, preferences, etc) or do your customizations piggyback as the defaults? What's making me ask is I see you've mapped your camera button to the omap 252 overclock setting and I'm curious what to expect when I load this ROM. Thanks!
100Tbps said:
Hi Summiter,
I'm set to receive my 8125 this week. I've been doing as much reading and bookmarking as I can until I have the phone in my hands, but I haven't seen this question posted yet.
When a user loads your ROM, does the phone start at the beginning of the customization process (setting time zones, preferences, etc) or do your customizations piggyback as the defaults? What's making me ask is I see you've mapped your camera button to the omap 252 overclock setting and I'm curious what to expect when I load this ROM. Thanks!
Click to expand...
Click to collapse
Your phone looses all setting and resets as if you just took it out of the box. Its a pain to do over but most of us have become pretty proficient at it with our mulitude of ROM reloads ;-)
Can anyone confirm that they have A2DP working on this ROM?
For folks that have reported not being able to get A2DP working - can you confirm whether the file "bta2dp.dll" exists in your windows directory? It's a hidden file so you'll need to set your file manager to view all files.
Thanks.
Is there an upgrade in one of these ROM versions for the Bluetooth? Im having issues with my 8125 and my BMW hands free car kit. My contact list doesnt show up on my display in the car. I had a SE 710a and it worked perfectly. With my 8125 I cant get the contact list on the hands free.
If you've CID unlocked previously, and you have 2.17 now, can you just use this ROM directly? Or is it necessary to downgrade and then CID unlock again? Sorry for the noob question.
Summiter...
There has been talk and concern about the 8125 erasing data on the sd card if you set your email options to save attachments to it. I was wondering if you knew anything about this and/or the new ROM version might fix the issue.
HI all,
I have setup MS Voice command on my Fuze to announce the name or phone number of the person calling on in coming calls. On my Tilt, it would announce the name either thru the speaker or my BT headset. With the Fuze, it will not. Is anyone else having this problem.
Also, with my Tilt, my ring tones would play thru my BT Headset and it will not on the Fuze. I don't know if this are related. I am using the BT headset on both.
Thanks
billf.
Yes, I'm having this same problem, and it is making me consider returning my Fuze and sticking with my tilt. Unless HTC or someone comes up with a fix within the next 2 weeks, my Fuze is going back. The only other bug I have noticed is that auto-correct does NOT work for the keyboard. It's supposed to automatically add in apostrophes for words, such as "can't, don't, won't" etc. Also, the word suggestion never shows up when I type, like it did on my Tilt. Of course it gives you suggestions with T9 turned on, but that's not the same as word suggestion. It would provide suggestions based on previous typing habits, and even predict entire phrases it thought I was going to type. Anyway....if someone figures out how to fix these problems, please let me know ASAP! Thanks.
I just noticed this tread. I too am having the same problem with it not announcing. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Check your settings. I think you have to announce notifications using bluetooth hands free if available. and uncheck "only durning free time"
I think that may work.
starstreak said:
Check your settings. I think you have to announce notifications using bluetooth hands free if available. and uncheck "only durning free time"
I think that may work.
Click to expand...
Click to collapse
That is the way I have it set up. No go. What is weird is that my ring tone plays over the bluetooth headset, but the computer generated voice doesn't speak.
it has to be a bad version or something.
also..last night i tried to install the cab i've used for over a year on top of the at&t version thinking it would overwrite the necessary files. no go. it corrupted the phone and had to hard reset to fix.
venelar said:
it has to be a bad version or something.
also..last night i tried to install the cab i've used for over a year on top of the at&t version thinking it would overwrite the necessary files. no go. it corrupted the phone and had to hard reset to fix.
Click to expand...
Click to collapse
I'm glad that you decided to be a "guinea pig!" Because I was going to try this today! I was going to re-install the .CAB that came from my Tilt. But I'm glad to see if that doesn't work. In order to find a solution, do you think I should call AT&T or HTC? Which one would give me the solution? Because I only have 25 days left before my Fuze is non-returnable.
Hmm I never tried it yet on the fuze with my BT. I'll try it and report back.
Ok crap. Yeah. It doesnt "voice" announce. I never noticed it because I can dial from headset and even number dial from headset and it'll work. I can hear it repeating the number back.
BUT its not like its not working... If I remove the announce incommming calls, it makes my phone ring, but in my earpiece I hear a tone to tell me I have a phonecall. When I enable announce incomming calls, my phone vibrates and I hear my ringtone in my ear, and faintly I can hear that "tone" I heard before. So it sounds like the voice side of things isnt working.
Ok tried one last thing before my BT headset died. Doh!
When it died, my phone announced the caller. So it does work. Its just not working from the BT headset, you hear a bell sound or something.
Also, I just noticed my cars BT doesn't show battery of the phone. When my Tilt was on the car BT, it would show the battery remaining.
MS Voice Command
Check out the MS Voice Command guide on WinMo-Experts. There might be an answer to your problems in there.
http://www.winmo-experts.com/viewtopic.php?f=11&t=2
Thanks for the link. I dont think it solved anything we're getting. Since Fuze has it built in, I dont think we can overwrite the files.
starstreak said:
Thanks for the link. I dont think it solved anything we're getting. Since Fuze has it built in, I dont think we can overwrite the files.
Click to expand...
Click to collapse
Guess I didn't notice, but dose not work for me either. I do enjoy that on the Tilt, but I more like the Tilt for the message and email voice notification.
Beahcboyde/JON
PS. I'm simply not keeping the Fuze. I'll stick with my Tilt and TF2. love the whole setup and the speed of the touchflo usingHyperDragon Raphael
Signal is average compaired to my Tilt, when testing out T-Mobile connection. On 3G, I'm constantly around 2 bars(but it spurts to full so I know its working) So I think Hawaii is still bad with 3G is some areas.
I use VC ALOT. So I'm amazed I never noticed this issue where it wont say the caller in my ear.
I'm not sure if I'll keep the phone/drop ATT/both.
Please someone fix this! I dunno if it helps, but all you hear is a bell sound in the background of your normal phone ringtone. I know thats from the MSVC. The only thing not working is the announcement of whos calling. I think everything else is working. I can voice dial,recieve calender announcements and appoinments,etc from my BT headset.
Oh, not just BT headset. It won't announce it from the phone either.
I even did a "bloat free" installation.
the fix is on pdaphonehome.com i had the same problem with my sprint touch pro. weird since the diamond doesn't have this problem. you have to edit the registry to use the wav file instead of the default. only side effect with the fix is the phone will ring once and VC will announce the rest of the duration.
sid
Eww,junk fix. I'll check it out tho. While not a problem when I have my headset, it would be if i had my phone sitting on a table.
Reg hack
I copied this from pdaphonehome.com....kuddos to the person that figured this
out. Kind of a hacky way to get it to work though. Perhaps the brains around
here can figure it out.
--------------------------------paste-------------------------------
This isn't a complete solution - but it's an improvement.
With this fix - the ring tone will play for a second and then be cut off by the call announcement. The announcement will be at a lower volume. The announcement will repeat - the ring tone will not be played again.
NOTE THAT YOU SHOULD ATTEMPT THIS FIX ONLY IF YOU ARE COMFORTABLE IN UPDATING YOUR REGISTRY.
Change the following registry keys:
HKCU\ControlPanel\Sounds\TTSAnnounce\Category
change from VoiceCommand1 to Ring
HKCU\ControlPanel\Sounds\TTSAnnounce\Script
change from as5p to v0p (that's v-zero-p) - for vibrate & ring, or p (ring only)
The above fix seems to get the announcements reliably, and doesn't break the set vibrate/set ringer features in the TF3D interface.
Hopefully we can find a better solution - that will restore the full functionality of Voice Command incoming call announcements - and not need this hack.
Another option is to manually overwrite the ringtone file name:
HKCU\ControlPanel\Sounds\RingTone0\Sound
change to \Application Data\Volatile\TTSCallerID.wav
This fix replaces the ringtone with the call announcement - and at full volume.
BUT this solution has several problems, including breaking the set vibrate/set ringer feature in TF3D.
From reading that, if I DON'T use the TF3D ring/vibrate, but use the windows mobile one, I should be fine by doing the second hack listed above? I think I could live with that as I eventually will kill the TF3D just so I can get the calender of my Pocket Informant to show instead. Only thing I like was the Weather and clock of the TF3D anyways and ATT crippled the clock by removing the animation.
Doe anybody know how to do the 2nd option? Not sure if I'm supposed to delete the whole registry line or somehow add to that line?