Related
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Anonymous said:
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Click to expand...
Click to collapse
Hell, its worse than 'just awful'....
...The Bluetooth on the PDA2K is just downright unusable.....
...I am still holding my breath, praying to GOD they get a real fix out and not just a 'here ya go' patch with more problems in it......
BT version... MDA III new ROM
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
have a hcb-30 bluetooth carkit that worked great with my Qtek 2020, but i cannot seem to get it to work with my qtek 9090....it finds the qtek allright and pairs with it, but cannot connect....my bluetooth version is 1.0.0 build 2200...
hope they get a fix out soon...
Re: BT version... MDA III new ROM
lukasz said:
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
Click to expand...
Click to collapse
I'm running v1.0.0 Biuld 2200
Mine also likes to turn the unit on every minute or two and run the battery down VERY fast...........
onurd said:
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
Click to expand...
Click to collapse
You may tried that DON'T PAIR the HBH35, Afterwards, use a Bluetooth connection wizard to add it. This may be OK to add HBH35.
I don't know how those incompetent idiots could release the blueangel with such a obvious bluetooth problem, HOW CAN THEY NOT see it! the error messeges pops up so frequently.
Go for it, version 1.5
http://forum.xda-developers.com/viewtopic.php?p=65548#65548
I couldnt get 1.5 to work on my pda2k, cant overwrite certain files... how did you do it?
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
you don't have it yet and you are telling other people to go for it! i dont think it works for the pda2k
Did you read or post first?????????????????
As you can see Guest and firebird say it worked to some degree for them on the PDA2K (MDAIII). Since I didn't have a BT headset to try myself I thought I would help you by pointing you to someone who had.
Read posts before blasting back.
*********************
Guest
Posted: Mon Nov 08, 2004 06:20
Subject: BlueTooth manually updated on PDA2k to 1.5.081
--------------------------------------------------------------------------------
http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
Since I didn't see in any thread about someone updating their PDA2k to the latest widcomm drivers... Just an FYI, I copied the files from the other thread onto my PDA2k. Seems to be working. Will test further to see if I'm still getting memory issues like before.
NOTE - I used Resco to copy the files over. There were several warnings that I was updating a file in ROM.. but I went ahead and did that anyway...figured I could hard reset the device if need be.
just a warning, the ROM files he was talking about overwriting, cannot be restored by doing a hard reset, it is permanent. if it messes up you will have to re-flash your pda with a new copy of the OS. that's what i had to do since i couldnt get it to work
Hi all,
Since I think we all can agree to that Bluetooth on Qtek 9090 is ****e, I've been snooping around a bit, and eventually I managed to get a brand new upgrade from Dangaard
This patch upgrades the Bluetooth Stack from build 2200 to 3500, and I have experienced some great improvements since I upgraded the device. I’m not done testing yet, but I’ll let you guys know if I find something interesting. I can’t post the file right now because the only link I have to the internet at the moment is my GPRS connection, but it was my understanding that Dangaard will post it on their site within a few days anyway.
I’ll get back to you with more information soon.
Mojn.
cool, please let us know....
However, if you have such a good relationship with DAANGARD, could you please aske them about XDA2 and SE?
THANX
buzz
Found it
http://www.mywindowsmobile.dk/modules.php?name=Downloads&d_op=viewdownload&cid=24
The site is in Danish, but it says that you have to copy both files to the Qtek and then execute them from the file explorer. First do the WWE one, then the Patch file, and then make a soft reset.
That'll do the trick ;-)
Have fun.
Hi,
Has anyone tried these patches? Does it works?
Sam
samvds said:
Hi,
Has anyone tried these patches? Does it works?
Sam
Click to expand...
Click to collapse
I have installed them. Before these patches my Qtek 9090 would turn on by itself when I have paired to the bluetooth carkit. Now it does not do that anymore. I never had problems using the bluetooth carkit together with bluetooth TomTom. So I can not say whether the patches have solved the issues when using bluetooth headset together with navigating using TomTom bluetooth.
've installed and tested the BT patches. I had several problems with the BT headset that are now solved.
- Headset was not reconnected after power off and on again: solved
Now it behaves in a strange way, that the BT keeps connected while the device is powered off and when you turn it on again, BT turns OFF and then On again in a second and the headset is reconnected.
Let's see if this has an impact on battery, as prior the patch, the battery was going down dramatically if the headset was paired!
For the moment I can recomment it, I have a Qtek9090
bluetooth patch
It's a shame to make a path after selling a defecting device.
Each patch that i have tested doesn't work enaugh for me.
It resolve some bugs but audio quality and crackssss are already here.
I have qtek 9090 and motorola 850. Poor audio quality and i have to stay front of the device to speak. If i stay front of it work well.
Is there another patch to test after v3000 and V3200 because it doens't resolve audio quality and distance.
Im using the update from windowsmobile.no ( aka mywindowsmobile.dk )
Found this one
http://www.qtek.nu/default.asp?nc=9683&id=110&element=0
It should update
GSM Radio
Bluetooth MMS Klient
Fix the sound troubbles for the reciver of a call from the phone.
can be downloaded here :
http://www.qtek.nu/files/BA_WWE_BP_12200_126_10600.zip
I wont/cant do anything with it, since it will only install on Swedish 9090, but maybe some off you guys can get the important files out of it??
yep i agree can someone post the important stuff?
I have Swedish QTEK 9090 and i also had installed this new ROM.
It wont fix this well known Jabra and Qtek crackling problem.
It's english, the above ROM 1.22 and instals on english Qtek... I've just done it.
XzaniX said:
It's english, the above ROM 1.22 and instals on english Qtek... I've just done it.
Click to expand...
Click to collapse
All Rom's released in Scandinavien are English.
The installer checks the country code on the phone and wont installed if it's not Swedish.
Well it is suppose to not installe, but for some reason a Norwigean guy over at windowsmobile.no got it installed without problems.
It wont install on mine, bought in Norway.
Does anybody know where to change the country code??
download
Non of the links work, can someone post the cab file?
Help, I bought a hbh-600 bluetooth headset but am not be able to connect it to my Qtek 9090. I can find the device and authorise it, but I am not able to connect to the device. Everytim I will connect to the device my Qtek 9090 says: Connection failed...
Help what can I do...
Had this problem yesterday with my step uncle's Harrier, and the HBH-600.. Just took a lot of fiddling around by turning bluetooth on/off, re-pairing, and it eventually worked.
I haven't seen this with my Harrier/HBH-600.. but I have had some general bluetooth issues.. About to try an upgrade to the 3500 build.
Can you tell me specific what you have done? Because I have tried that repairing and Bluetooth on and off also a few times...
Is it the authentification? Or is it something else.
Tnx!
:wink:
Well, no, not really sorry.. I was just mucking around, because he was in a hurry to leave... It just worked in the end. It may well not be the same problem anyway.. sorry.
the range on HBH600 sucks - mount it on the ear, and put 9090 in your trousers pocket or extend your arm while holding PPC - you will have very poor sound instantly.
Tnx all for the info. I have found the BT-PPC build 3500 patch and my bluetooth headset is working!!!
what's your radio firmware version now ?
Radio: 1.06.00
Bluetooth: BT-PPC build 3500
where is the a2dp support..............
i can't say anything else............ :twisted: :twisted: :twisted: :twisted: :twisted: :twisted: :twisted:
Niver2002, is this ROM available anywhere?
have you tried the newest one, 2.16.9.101? It was just uploaded by someone. Ihave installed it on my Cingular 8125 and it replaces everything. IPL/SPL, Radio, and maybe even Protocol rom versions. Unfortunately I don't have a stereo headset to try. But I did see on a post about the Universal (uses 420MHz XScale) couldn't play a video and use stereo bluetooth.
Currently it is in the upload/HTC-Wizard folder.
Lord Buckingham,
Check other threads; it's all over the board and iMates FTP/HTTP servers.
niver2002,
I was sure I read that iMate are doing a 2.0 ROM now to get DirectPush out the door as soon as possible (to keep MS and partners happy) and have stated that a 2.2 (Stereo BT profile) will follow in a few weeks. BT Stereo aside it looks like a solid enough ROM to use if you want DirectPush.
sorry for my politeless.
but when i use qtek testing rom,
i've try the a2dp and like it very much,
even there is some bug and noise come with the music.
i wait for the new version day and night,
all right now i got it.......and it makes me so disappointed.......
my new r35 is wasted either..........
Hello,
Just upgraded to WM6 using the official Palm upgrade (TREO750-2.23-RWE).
The Treo is unbranded and came with WM5, also an RWE ROM.
The most important issue I currently have is terrible bluetooth interaction with my car-kit. Pairing is OK, I can start or receive a call, but there is no sound. Before, with WM5 I had no issues.
Setup:
- Treo 750
- WM6 (TREO750-2.23-RWE)
- Pegeuot RD4 radio with integrated bluetooth
Any solution? Or should I downgrade to WM5? If so, how should I downgrade?
Your help is most welcome!
David
Odd... With both the Treo 750 running WM5, I had the same problem. Basically, the first 30-60 seconds of a call wouldn't sound on either the handset, or the speakers over the bluetooth connection. This was always for the first call after getting in the car. To get around it, I would get in, start up the car, and call my voicemail. Once I could hear the call on the speakers, usually 30 seconds later, I would hang up. I could then make and receive calls normally.
After upgrading to WM6, incoming calls would occasionally be very low volume. I would have to hang up and call the person back. This also happens with WM6 on my AT&T Tilt.
No fix for that one....
daupers said:
Hello,
Just upgraded to WM6 using the official Palm upgrade (TREO750-2.23-RWE).
The Treo is unbranded and came with WM5, also an RWE ROM.
The most important issue I currently have is terrible bluetooth interaction with my car-kit. Pairing is OK, I can start or receive a call, but there is no sound. Before, with WM5 I had no issues.
Setup:
- Treo 750
- WM6 (TREO750-2.23-RWE)
- Pegeuot RD4 radio with integrated bluetooth
Any solution? Or should I downgrade to WM5? If so, how should I downgrade?
Your help is most welcome!
David
Click to expand...
Click to collapse
daupers,
Just curious that this might be related. Can you post what radio version you ended up with after the upgrade to WM6?
Dropped the issue at Palm
Yesterday I sent an email to drop the issue at Palm, since I used the official upgrade on an official pristine Treo. I still have to receive an answer.
I'm wondering if I ever will receive an answer that will resolve my issue.
Did anybody else on this forum ever get help from Palm?
David
Im heaving simmilar problems with Treo 750 WM5 and Toyota original BT-HF. Repatedly the connection is established, but then lost (without warning) - and then you get no sound (or an odd "interferrence " sound). I switch the BT off, then on, connect it again and it (usually) works fine. I assume it has smthng to do with the BT firmware. No other solution so far.
Where can I find a download for the original RWE WM5 ROM?
Can anybody provide me with a link to an WM5 RWE ROM for the Treo 750 (Cheetah)?
Thanks
I did some searching and so far I discovered the following.
WM 5 supports bluetooth 1.2.
WM 6 supports bluetooth 2.0, which should be backwards compatible with 1.2.
The carkit supports 1.2, but I'm not sure if it supports 2.0.
It looks like a compatibility issue, caused by the upgrade.
Could this be the source of the problem?
D
The hardware in the 750 supports 1.2 only, WM6 is backwards compatible with 1.2. Any device that supports 2.0 will be backwards compatible with 1.2. I just upgraded to the AT&T official WM6 build and am still having the same problems as always with my Moto HF850, no voice command, only get one working connection before the bond fails and I get no audio. *sigh*
I have the same problems Treo 750V 2.18-VFE with WM6.
Car: Citroen C4 with integrated bluetooth radio.
My car connects fine to the Treo, however when I make a call or answer a call 9 out of 10 times I have no sound. Currently I have to use the wired headset.... While I have no sound the connection is intact and I cannot use the Treo itself without cancel bluotooth from the menu.
I can read the indexes of the phone, make calls by using car functionality but no sound. Also when I have sound most of the time it's after ten seconds.
Since yesterday I also have no ringer sound anymore. Palm Support gave me an update but it's not for my ROM version.
I'm affraid I have to ask Palm to swap the phone again. Currently this is number 3:-( within a few months
BT working after WM6 upgrade
Hi everybody, surprisingly, after upgrade to WM6, my BT connection with toyota original handsfree started to work, I haven´t had a single "lost connection" since. Why is that I don´t know... Just to let U know - More lucky than the others...
I Received my fourth Treo last week. I now have ringer sound again (for now).
However I still have the sound problems with using my carkit.
My car connects fine to the Treo, however when I make a call or answer a call 9 out of 10 times I have no sound.
I get the same problem with an Orange SPV M3100 (HTC TYTN) and by factory fitted bluetooth kit in my Citroen C4... It's fine using the latest Orange WM5 ROM, but upgrading to WM6 stops the car kit from working, (connects, but no sound). I asked my Citroen dealer and they advised it was a known issue with 'high end phones like Nokia running Symbian, etc'. They had no idea about when a fix might be available.
Delayed or Missing Sound
Install the sound fix. That's what is there for.
What sound fix? Can you post a link, or let me know where it is?
Support also advised me to install the sound fix.
However it only work for lower rom versions.
When you install WM6 You will have a higher rom version.
The sound fix should allready be in WM6.
I think I'll try to contact Citroen about this...