warning to all who update 3500 bluetooth patch on clubimate. - MDA III, XDA III, PDA2k, 9090 Software Upgrading

The software i downloaded which is version 124 of their 3500 patch..it makes the pda2k ONLY ring to the bluetooth headset, whether you have one on or not. if you dont have your headset on or bluetooth enabled, the phone WILL NOT RING AT ALL! i downgraded to the previous 3500 patch and the phone rings again. just a quick warning if you are having problems after the install.

Thanks for this warning. I was just about to do a rom upgrade.

Re: warning to all who update 3500 bluetooth patch on clubim
Eddieh31 said:
The software i downloaded which is version 124 of their 3500 patch..it makes the pda2k ONLY ring to the bluetooth headset, whether you have one on or not. if you dont have your headset on or bluetooth enabled, the phone WILL NOT RING AT ALL! i downgraded to the previous 3500 patch and the phone rings again. just a quick warning if you are having problems after the install.
Click to expand...
Click to collapse
I have upgarde my PDA2K to 1.22.00 WWE yesterday. The intergrated 3500 version patch has the 1.0.0 version inlcuded which works fine !

Re: warning to all who update 3500 bluetooth patch on clubim
Gboye said:
Thanks for this warning. I was just about to do a rom upgrade.
Click to expand...
Click to collapse
Do it !

french new rom
Is somebody can post the french version new rom from imate please.
I have a qtek 9090 and a lot of troubles with audio quality with bluetooth headset
Scrashessssss in the headset when i am far from the device.
It's the same with all bluetooth headset
Is the new rom correct this trouble ?

Related

Imate Rom BT Stack version

I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Anonymous said:
PDA2K has the same issues with the BT Stack. In fcat it is just awful.
Click to expand...
Click to collapse
Hell, its worse than 'just awful'....
...The Bluetooth on the PDA2K is just downright unusable.....
...I am still holding my breath, praying to GOD they get a real fix out and not just a 'here ya go' patch with more problems in it......
BT version... MDA III new ROM
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
have a hcb-30 bluetooth carkit that worked great with my Qtek 2020, but i cannot seem to get it to work with my qtek 9090....it finds the qtek allright and pairs with it, but cannot connect....my bluetooth version is 1.0.0 build 2200...
hope they get a fix out soon...
Re: BT version... MDA III new ROM
lukasz said:
I would like to know which version of the BT you guys have = which is most current for MDA III. To verify this go to settings/connection/bluetooth an check in About .
I have heard some news that ROM 1.20 is being tested internally, and somebody promised me to provide it to me. I am really waiting.. as current one keeps turning on device every minute...
Click to expand...
Click to collapse
I'm running v1.0.0 Biuld 2200
Mine also likes to turn the unit on every minute or two and run the battery down VERY fast...........
onurd said:
I am struggling to use my SonyEricsson HBH 35 Headset with my Tmobile MDAIII. But after a while the BT Stack stops working and I have to turn BT on and off to be able to use the headset again. Tmobile Service Line told me that they are aware of the problem and they will post a fix for that but no time frame was giving. Therefore I was wondering whether the latest Imate PDA2k Rom was having the same BT problems. Which version of BT stack is on this rom? Is it possible to copy the necessary files onto the MDA III and make it work with the never version?
Click to expand...
Click to collapse
You may tried that DON'T PAIR the HBH35, Afterwards, use a Bluetooth connection wizard to add it. This may be OK to add HBH35.
I don't know how those incompetent idiots could release the blueangel with such a obvious bluetooth problem, HOW CAN THEY NOT see it! the error messeges pops up so frequently.
Go for it, version 1.5
http://forum.xda-developers.com/viewtopic.php?p=65548#65548
I couldnt get 1.5 to work on my pda2k, cant overwrite certain files... how did you do it?
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
I didn't do it as i don't have a BT headset yet. because of these treads I'm waiting before i get the headset, gps, and keyboard for bluetooth
you don't have it yet and you are telling other people to go for it! i dont think it works for the pda2k
Did you read or post first?????????????????
As you can see Guest and firebird say it worked to some degree for them on the PDA2K (MDAIII). Since I didn't have a BT headset to try myself I thought I would help you by pointing you to someone who had.
Read posts before blasting back.
*********************
Guest
Posted: Mon Nov 08, 2004 06:20
Subject: BlueTooth manually updated on PDA2k to 1.5.081
--------------------------------------------------------------------------------
http://forum.xda-developers.com/viewtopic.php?t=11729&highlight=widcomm
Since I didn't see in any thread about someone updating their PDA2k to the latest widcomm drivers... Just an FYI, I copied the files from the other thread onto my PDA2k. Seems to be working. Will test further to see if I'm still getting memory issues like before.
NOTE - I used Resco to copy the files over. There were several warnings that I was updating a file in ROM.. but I went ahead and did that anyway...figured I could hard reset the device if need be.
just a warning, the ROM files he was talking about overwriting, cannot be restored by doing a hard reset, it is permanent. if it messes up you will have to re-flash your pda with a new copy of the OS. that's what i had to do since i couldnt get it to work

New Bluetooth Stack for Qtek 9090

Hi all,
Since I think we all can agree to that Bluetooth on Qtek 9090 is ****e, I've been snooping around a bit, and eventually I managed to get a brand new upgrade from Dangaard
This patch upgrades the Bluetooth Stack from build 2200 to 3500, and I have experienced some great improvements since I upgraded the device. I’m not done testing yet, but I’ll let you guys know if I find something interesting. I can’t post the file right now because the only link I have to the internet at the moment is my GPRS connection, but it was my understanding that Dangaard will post it on their site within a few days anyway.
I’ll get back to you with more information soon.
Mojn.
cool, please let us know....
However, if you have such a good relationship with DAANGARD, could you please aske them about XDA2 and SE?
THANX
buzz
Found it
http://www.mywindowsmobile.dk/modules.php?name=Downloads&d_op=viewdownload&cid=24
The site is in Danish, but it says that you have to copy both files to the Qtek and then execute them from the file explorer. First do the WWE one, then the Patch file, and then make a soft reset.
That'll do the trick ;-)
Have fun.
Hi,
Has anyone tried these patches? Does it works?
Sam
samvds said:
Hi,
Has anyone tried these patches? Does it works?
Sam
Click to expand...
Click to collapse
I have installed them. Before these patches my Qtek 9090 would turn on by itself when I have paired to the bluetooth carkit. Now it does not do that anymore. I never had problems using the bluetooth carkit together with bluetooth TomTom. So I can not say whether the patches have solved the issues when using bluetooth headset together with navigating using TomTom bluetooth.
've installed and tested the BT patches. I had several problems with the BT headset that are now solved.
- Headset was not reconnected after power off and on again: solved
Now it behaves in a strange way, that the BT keeps connected while the device is powered off and when you turn it on again, BT turns OFF and then On again in a second and the headset is reconnected.
Let's see if this has an impact on battery, as prior the patch, the battery was going down dramatically if the headset was paired!
For the moment I can recomment it, I have a Qtek9090
bluetooth patch
It's a shame to make a path after selling a defecting device.
Each patch that i have tested doesn't work enaugh for me.
It resolve some bugs but audio quality and crackssss are already here.
I have qtek 9090 and motorola 850. Poor audio quality and i have to stay front of the device to speak. If i stay front of it work well.
Is there another patch to test after v3000 and V3200 because it doens't resolve audio quality and distance.
Im using the update from windowsmobile.no ( aka mywindowsmobile.dk )
Found this one
http://www.qtek.nu/default.asp?nc=9683&id=110&element=0
It should update
GSM Radio
Bluetooth MMS Klient
Fix the sound troubbles for the reciver of a call from the phone.
can be downloaded here :
http://www.qtek.nu/files/BA_WWE_BP_12200_126_10600.zip
I wont/cant do anything with it, since it will only install on Swedish 9090, but maybe some off you guys can get the important files out of it??
yep i agree can someone post the important stuff?
I have Swedish QTEK 9090 and i also had installed this new ROM.
It wont fix this well known Jabra and Qtek crackling problem.
It's english, the above ROM 1.22 and instals on english Qtek... I've just done it.
XzaniX said:
It's english, the above ROM 1.22 and instals on english Qtek... I've just done it.
Click to expand...
Click to collapse
All Rom's released in Scandinavien are English.
The installer checks the country code on the phone and wont installed if it's not Swedish.
Well it is suppose to not installe, but for some reason a Norwigean guy over at windowsmobile.no got it installed without problems.
It wont install on mine, bought in Norway.
Does anybody know where to change the country code??
download
Non of the links work, can someone post the cab file?

BT3900 or BT3500

Hi all,
Just got my PDA2k and like all of you I'm suffering the bluetooth problem. Can someone tell me which is a better fix the BT3500 or BT3900? Does this fix the problem of headset bonding when phone resumes? Does anyone have a link to where either can be downloaded please?
Thanks
Medube 8)
The files are here ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/
I found the 3900 a little bit better, but i think its very independent for each setup.
i sold my XDA2s to a friend (probley soon to be ex friend) anyway as it hard reset its self he gave it back to me to reinstall his tomtom. As there was a rom upgrade i did this as well, i also used the the BT3900 from my XDA2i but i could not get the 2s to pair with any BT headsets, so i had to go back to the BT3500 that came in the new rom upgrade.
John
Im trying to get hold of bt 3900 but i cant get on to the ftp server? do I need special access or is it something im doing wrong (like clicking the link with the wrong finger or somthing :shock: )
irelmo said:
Im trying to get hold of bt 3900 but i cant get on to the ftp server? do I need special access or is it something im doing wrong (like clicking the link with the wrong finger or somthing :shock: )
Click to expand...
Click to collapse
Try using an FTP klient instead of using your browser.
Host : xda-developers.com
User : xda
Pass : xda
Just put the user and password in lower case
I'm confused. Isn't OEM_WWE_160_600.sa.CAB (version 1.6.0.600) a newer version than 1.0.0.3900 or 1.0.0.3500?:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/OEM_WWE_160_600.sa.CAB
Click to expand...
Click to collapse
I'm running this version without problems and includes the "Connect to a keyboard" and "High quality audio setup" bluetooth profiles.
andresp said:
I'm confused. Isn't OEM_WWE_160_600.sa.CAB (version 1.6.0.600) a newer version than 1.0.0.3900 or 1.0.0.3500?:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/OEM_WWE_160_600.sa.CAB
Click to expand...
Click to collapse
I'm running this version without problems and includes the "Connect to a keyboard" and "High quality audio setup" bluetooth profiles.
Click to expand...
Click to collapse
Well as far as i know, the 160_600.sa.cab is a Widcom release, whereas the 3500 and 3900 are Broadcom, and these 2 companies are now the same....again as far as i have heard.
I tried the 160_600.sa.cab but it was a total disaster. Dont let the numbers fool you. Since these are from 2 different companies.
someone has explained in other post that Widcomm 1.6.0.600 is older than Broadcomm 1.0.0.3900. After Broadcomm bought Widcomm they reseted version numbering to 1.0.0
Currently the latest BT stack I was able to find is 1.0.0.3900 and audiogw.dll - 1.33g.00. There is 1.35.00 DLL but it has problems transferring call from BT to handheld. audiogw.dll is the reason of bad sound quality over BT.
I have upgraded to BT 3900, after soft reset the sound cracled like hell, so I reinstalled 3500 and the fix for it (posted on the FTP), then the sound was better, I then reinstalled 3900 and it now sounds good as well. I noticed that the crackle is intermittent on both 3500 and 3900.
Yesterday evening I fully charged my PDA2k and this morning it needed to be charged again, I only made 4 short calls. But I must say that I had my SE HBH-660 off all the time!!??. could this be the reason or the 3900.
P.S. I run my PDA2K with the Arabisation software, and I used to have a lot of hanging and freezing but after cooking the ROM and updating the Radio to 1.06.02 and replacing Caller ID 1.17 (in the extended ROM) with 1.20, it has been running without trouble (for three weeks) in spite of loading lots of other software.
I reckon removing Caller ID 1.17 from the Extended ROM was a good thing!!
ROM Version 1.31.00 WWE
ROM Date 12/13/04
Radio Version 1.06.02
Protocol Version 1337.38
ExtROM Version 1.31.112 WWE
Simple.
Mamaich
Does BT 3900 come with this version of audiogw.dll - 1.33g.00 or is this a sperate file file you have upgraded. If it is can you tell me where to get it from. Ive tried a search here and on google .
Out of interest how do you determine the dll version in pocketpc as this file doesn't come up in the bluetooth manager file list?
I'm using the HP headphones and am pretty happy but the quality is a bit scratchy when you put the XDA2s in your pocket, would be nice if this could be fixed.
Thanks
Wayne
wth said:
Mamaich
Does BT 3900 come with this version of audiogw.dll - 1.33g.00 or is this a sperate file file you have upgraded. If it is can you tell me where to get it from. Ive tried a search here and on google .
Click to expand...
Click to collapse
Uhh...did you read this thread?
The link is in here...
But ok, here it is again: ftp://xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
Look at the BT_Fix as wel...what version the audiogw.dll is, I am not sure, but I think the fix has the latest version.
Cheers,
Happy
HappyGoat - Uhh...did you read my question?
as wel...what version the audiogw.dll is, I am not sure, but I think the fix has the latest version
Click to expand...
Click to collapse
Sorry perhpas I didn't ask the question clearly enough, but what I was asking was.... Is that version of the audiogw.dll included in the 3900 patch?
I only asked as it was stated as a particular version and I dont know how to check the dll version info.
Thanks
Wayne
BT 3500 better than 3900
Yesterday evening I fully charged my PDA2k and this morning it needed to be charged again, I only made 4 short calls. But I must say that I had my SE HBH-660 off all the time!!??. could this be the reason or the 3900.
Click to expand...
Click to collapse
I had the same experience this weekend.
I used to charge it on Friday night and use ir regulary during the weekend with my HBH-600
This weekend, Sunday night battery was exhausted.
I also think that BT 3500 is more stable
audiogw.dll is not included in this one BroadcomCorp_BT1.0.0.3900.cab
Mine is eating power like i have never seen it done before.
Only think .3900 did for me, it's faster to end a conversation pushing the button on the Headset.
I have BT 3900 installed and don't have problems with battery. I have a bonded BT headset and BT activesync connection with PC.
Regarding audiogw. Fix_For_BT.sa.CAB has an updated TIBinaryParser.dll. It deals something with WiFi and BT coexistence. I don't use WiFi so I didn't notice any differences. This archive also has 1.35.00 audiogw.dll that has problems transferring call from headset to phone. I don't recommend installing it. It was taken from Harrier 1.35 ROM and is probably incompatible with other ROMs.
I've attached audiogw.dll that I'm currently using. It is 1.33g version.
I just need some clarification please. If I want to update my BT 3500 stack which of the following cabs should I install ? One of them or both and in what order ?
BroadcomCorp_BTUpdatefor1.0.0.3500.cab
Fix_For_BT.sa.CAB
firas said:
BroadcomCorp_BTUpdatefor1.0.0.3500.cab
Fix_For_BT.sa.CAB
Click to expand...
Click to collapse
You don't need any of these 2 CABs. The first is high quality audio/BT keyboard profiles update and the second is a buggy DLL from Harrier ROM that cause problems on other devices. You need ftp://[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/BroadcomCorp_BT1.0.0.3900.cab and the attached CAB in my prev. post. You may install BroadcomCorp_BTUpdatefor1.0.0.3500.cab if you use BT keyboard or have headset that supports high quality audio profile. I have these 3 CABs installed for 3 days and don't have BT problems.
The 3900 file is remove from that directory. Any idea why it's been removed?
rikurn said:
The 3900 file is remove from that directory. Any idea why it's been removed?
Click to expand...
Click to collapse
Maybe someone thought it was funny to delete it.
It's back there now.
Has 3900 improved static?
Has anybody with a PDA2k installed BT3900 to improve static on their BT headset with any success? I'm currently on 3500 through the imate ROM build, and can pair with my HS-850, but the static is pretty bad regardless of the range.

The Bluetooth Post - will it ever work!

Hi all,
Dunno about you guys but my new XDA2s is pretty paff when it comes to bluetooth. Scratchy sound, erratic volume, headset disconnecting randomly, poor range, etc etc.
I have used an old O2 G2 headset, a new O2 Bluetrek headset and most recently a Nextlink Bluespoon AX headset. All of them were nearly as bad as each other - except the volume on the AX is far less erattic. However, using them with my PC proved no problem so the XDA2s is at fault here!
I did find that forcing the headset to use headset mode rather than hands-free made a significant difference on the older models, however I cannot manage to force the AX to headset mode in any way (still waiting for tech support on that). The AX is let off though as its hands-free mode is as good as the headset mode on the older models, I just hope it will be even better when I force it to headset (if anyone knows how let me know!).
So - I have tried the following builds with my AX:
Radio 1.06.00 BT 3500 - BAD
Radio 1.06.00 BT 3900 - BAD
Radio 1.08.00 BT 3500 - Better volume and outgoing call, but bad for person on other end of the phone.
Radio 1.08.00 BT 3900 - Pretty much the same, small imporvement for me, no imporvement for other end of the line.
I am hoping we can keep a track of various radio and BT version in this post and try between us to figure out a good combination.
There is an extra audio dll
There is an extra audio dll for bluetooth that fixes some problems posted somewhere else in this forum.
This one fixed bluetooth headset enormous here.
I believe the dll you are talking about adds the high-quality bluetooth protocl, allowing stereo bluetooth heasets to be used for music etc. Does this make any difference to the normal bluetooth headsets though?
R
Hi,
Not sure how I got mine to work but I am using a Jabra 200 headset and it works great.
I am using a custom image of WM2003SE with the optional BT drivers and so far no problems - I found when I originally had similar issues I had to pair the headset again and then everything was okay (I noted the XDAII asked if I wanted to enable the headset support).
I get the odd problem where the headset icon disappears from the today screen but I found that its still there, just doesn't refresh so you have to tap the area and it comes to life.
The headset answers the calls after 3 rings (the headset creates beeps in time with the ringing) and when I dial the headset switches on after a second of making the call. The only thing I have noticed is that I cannot redial when pressing the button on the headset however it does hangup an existing call.
Cheers,
Godz
Hi finalzero - you say XDAII, do you mean IIs or are you using the II? My old XDAII worked fine - it is just this new XDAIIs that is giving me problems.
R
Bluetooth
Hi ,
same problem for me ,
Radio 1.08.00 BT 3900 - slightly better but not the best wit Jabra 250 V & Qtek 9090 ,
I installed BA_OEM_AudioGW CAB , downloadble somewhere around , but still problems .
When all of this will end ? Bluetooth is a nightmare !
I've had an XDA2 (several actually and got fed up of them being rubbish so insisted on an upgrade) now got XDAIIs. The bluetooth manager is aweful! Can't connect to my O2 headset, does't work well with TomTom3 and is generally crap!
Logged on to find out if anyone else is having trouble so please it's not just me, now all I need to do is find out how to fix it. I'm not a mega techie (but not too bad with the right support) and wondered if it's possible to use the bluetooth software from the XDA2?
Bluespoon AX
I have the same sort of combination Orange M2000 and Bluespoon AX and have the same nightmare sound quality - using Radio 1.04.00 and BT 3900. The AudioGW patch makes no difference (as posted above it's for headphone solutions).
Would be interested in the info you get back from Nextlink on the way to force the mode of the device if possible. Otherwise it's a complete waste of money as it crackles at both ends.
Nothing back from NextLink - have sent 2 emails. With radio 1.08 it sounds fine to me but the user on the other end reports it still quite bad. Gonna do 1.10 soon and see if that helps...
Rich
XDAIIs Bluetooth - upgrade to a Jabra 250
I had similar problems with my bluetooth Jabra 200 so I upgraded to a 250 (the black one) and I didn't have any further problems. The vibrating alert is really neat... 8)
bluespoon AX
while we're waiting for Nextlink's reply - can anyone advise me as to whether an upgrade to the Radio version (I'm only on 1.04) requires a hard reset (and full software re-build) or not? If not - are there instructions on another post that say how to do it??
Upgrading to radio ROM 1.08 or 1.10 may improve your BT performance significantly -- I updated my SX66 to 1.08 a couple weeks ago and my Bluetrek G2 headset now works much better.
Radio ROM upgrades do involve a hard reset & software re-install; this thread is devoted to the 1.10 upgrade -- there's another one in this forum for the 1.08.

bluetooth hell

Hi folks,
I've upgraded from version 1.40 WWE - radio 1.10 to versione 1.40 ITALIAN and radio 1.12.
Before the upgrade, my bluetooth headset motorola HS801 was recognized but appear like a very noisy and crackled device. Sometimes people don't hear me, sometimes yes, it was a lucky job to talk wth everyone. My BT version was 3900.
And now?
Now after the upgrade, my HS801 isn't recognized at all. Bt3900 says no services availables for the headset, it was found but not linked to my QTEK 9090.
Must I take my headset and put it in the recycle bin or somewhere anybody is so merciful to give me a hope...?
Will this hell end or what ? Upgrade after upgrade it seems to be worse.
Thanks to all
albnigxda said:
Hi folks,
And now?
Will this hell end or what ? Upgrade after upgrade it seems to be worse.
Click to expand...
Click to collapse
tell me about it..............I think the actual Bluetooth hardware itself has a defect or incorrectly designed. no amount of upgrades and patches can fix that issue unless a hardware recall is done.......
Well, my headset motorola HS801 have had troubles and problems since from first time I used it. With BT2200 CE Rom 1.02 it was not recognized at all, like now with CE 1.40, RADIO 1.12 anc BT3900. This is a summary:
CONFIG. USAGE
ROM RADIO BT VERSION
1.02 1.06 2200 NOT RECOGNIZED
1.06 1.08 3500 RECOGNIZED, LOUD, NOISY
1.22 1.10 3900 RECOGNIZED, LOUD, NOISY
1.40 WWE 1.10 3900 RECOGNIZED, LOUD, NOISY
1.40 ITA 1.12 3900 NOT RECOGNIZED (service not found)
Very strange think, indeed.

Categories

Resources