The software i downloaded which is version 124 of their 3500 patch..it makes the pda2k ONLY ring to the bluetooth headset, whether you have one on or not. if you dont have your headset on or bluetooth enabled, the phone WILL NOT RING AT ALL! i downgraded to the previous 3500 patch and the phone rings again. just a quick warning if you are having problems after the install.
Thanks for this warning. I was just about to do a rom upgrade.
Re: warning to all who update 3500 bluetooth patch on clubim
Eddieh31 said:
The software i downloaded which is version 124 of their 3500 patch..it makes the pda2k ONLY ring to the bluetooth headset, whether you have one on or not. if you dont have your headset on or bluetooth enabled, the phone WILL NOT RING AT ALL! i downgraded to the previous 3500 patch and the phone rings again. just a quick warning if you are having problems after the install.
Click to expand...
Click to collapse
I have upgarde my PDA2K to 1.22.00 WWE yesterday. The intergrated 3500 version patch has the 1.0.0 version inlcuded which works fine !
Re: warning to all who update 3500 bluetooth patch on clubim
Gboye said:
Thanks for this warning. I was just about to do a rom upgrade.
Click to expand...
Click to collapse
Do it !
french new rom
Is somebody can post the french version new rom from imate please.
I have a qtek 9090 and a lot of troubles with audio quality with bluetooth headset
Scrashessssss in the headset when i am far from the device.
It's the same with all bluetooth headset
Is the new rom correct this trouble ?
There are a couple of standalone updates around but not too much information about any improvements or otherwise with the Blue Angel variants. So lets post our results and see if these updates are worth upgrading to. My XDA IIs is running
latest rom 1.31
bt patch 3900
radio 1.06.02
Bt upgrade seems to have made minimal changes, maybe a touch louder but thats all, no other changes noticed
Radio 1.06.02; cant say i notice any changes here as i didnt have any calling problems with ver 1.02. I upgraded cos of a problem with wifi which is still there
Anyone have anything to note about the wlan patch? If there are any other patches i missed please post what they are and what effects it has had
Hi.
I have spent a while looking for the patches. Can you point me in the right direction?
I actually went back to the Dangaard BT stuff...version 3500 and patch. This worked better for me with my Logitech BT Headset.
I upgraded the radio also to 1.06.02...can't really say it made a difference, but hell, it didn't hurt either...
BT Build 3900
Hi.
Upgraded to Build 3900 from 3500, found on the FTP server.
Only dif. is that my SE HBH 300 is now faster do disconect a call when pressing the on/of switch.
I was fooling around alot with my BA the day i installed the Build 3900, and right after installing the patch i tested it without a Soft Reset. I got a perfect connection without any crackling noise and a really good distance.
After a Soft Reset it was back to the old crackling noise and poor distance.
And i just cant recreate the scenario i had that day
Radio, dont know. Dident have any troubbles with the old one.
Wlan patch, wating for others to tell.
I upgraded my radio rom to 1.06.02 and BT Stack 3900 and found the Bluetooth still crackled on my old jabra bt 200.. just bought a BT800 today and it appears to work better even the caller display works.. with the radio stack upgrade i have had quite a lot of problems connecting to known wifi access points even when all the correct details were in. I also could not connect to BTOpenzone when standing under the access point (and yep i do have an account on it) so I re flashed the radio rom back to 1.06.00 and bluetooth 3900 with high quality audio patch and it all back to normal with abit mor BT Stability :roll:
Jabra BT800 worked straight out the box with no patch needed and has good loud audio 8) and a range of 10 meters ish still a bit crackly at 5 meters though
Marqnet said:
... so I re flashed the radio rom back to 1.06.00 and bluetooth 3900 with high quality audio patch and it all back to normal with abit mor BT Stability :roll:
Click to expand...
Click to collapse
So what you are saying is that radio version 1.06.02 interferes with WiFi somehow....that is interesting... :shock:
Do you remember what happened with your WiFi strength when you turned of BT, or have you not tried that?
Cheers,
HappyGoat
Hi as far as i am aware so far there has been no real issue with the Bluetooth and wifi interfering with each other or should i say i have not experienced any problems. the i ssue was just around using wifi and its connectivity problems i have had with open and unencrypted access points and encrypted ap,s the radio could see them but not connect. my xda came with 1.06.00 as standard and i was curious to see what the latter radio rom would offer. so as i didnt work for me i decided to go backward on step and all seems weel now. will agree interesting one and after trying a number of different 1.06.02 files as i thought the first was corrupt i just decided to revert back to a known to me working rom.
radio version difference
what is the difference in radio version 1.02 v 1.06?
Hi all,
Just got my PDA2k and like all of you I'm suffering the bluetooth problem. Can someone tell me which is a better fix the BT3500 or BT3900? Does this fix the problem of headset bonding when phone resumes? Does anyone have a link to where either can be downloaded please?
Thanks
Medube 8)
The files are here ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/
I found the 3900 a little bit better, but i think its very independent for each setup.
i sold my XDA2s to a friend (probley soon to be ex friend) anyway as it hard reset its self he gave it back to me to reinstall his tomtom. As there was a rom upgrade i did this as well, i also used the the BT3900 from my XDA2i but i could not get the 2s to pair with any BT headsets, so i had to go back to the BT3500 that came in the new rom upgrade.
John
Im trying to get hold of bt 3900 but i cant get on to the ftp server? do I need special access or is it something im doing wrong (like clicking the link with the wrong finger or somthing :shock: )
irelmo said:
Im trying to get hold of bt 3900 but i cant get on to the ftp server? do I need special access or is it something im doing wrong (like clicking the link with the wrong finger or somthing :shock: )
Click to expand...
Click to collapse
Try using an FTP klient instead of using your browser.
Host : xda-developers.com
User : xda
Pass : xda
Just put the user and password in lower case
I'm confused. Isn't OEM_WWE_160_600.sa.CAB (version 1.6.0.600) a newer version than 1.0.0.3900 or 1.0.0.3500?:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/OEM_WWE_160_600.sa.CAB
Click to expand...
Click to collapse
I'm running this version without problems and includes the "Connect to a keyboard" and "High quality audio setup" bluetooth profiles.
andresp said:
I'm confused. Isn't OEM_WWE_160_600.sa.CAB (version 1.6.0.600) a newer version than 1.0.0.3900 or 1.0.0.3500?:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/OEM_WWE_160_600.sa.CAB
Click to expand...
Click to collapse
I'm running this version without problems and includes the "Connect to a keyboard" and "High quality audio setup" bluetooth profiles.
Click to expand...
Click to collapse
Well as far as i know, the 160_600.sa.cab is a Widcom release, whereas the 3500 and 3900 are Broadcom, and these 2 companies are now the same....again as far as i have heard.
I tried the 160_600.sa.cab but it was a total disaster. Dont let the numbers fool you. Since these are from 2 different companies.
someone has explained in other post that Widcomm 1.6.0.600 is older than Broadcomm 1.0.0.3900. After Broadcomm bought Widcomm they reseted version numbering to 1.0.0
Currently the latest BT stack I was able to find is 1.0.0.3900 and audiogw.dll - 1.33g.00. There is 1.35.00 DLL but it has problems transferring call from BT to handheld. audiogw.dll is the reason of bad sound quality over BT.
I have upgraded to BT 3900, after soft reset the sound cracled like hell, so I reinstalled 3500 and the fix for it (posted on the FTP), then the sound was better, I then reinstalled 3900 and it now sounds good as well. I noticed that the crackle is intermittent on both 3500 and 3900.
Yesterday evening I fully charged my PDA2k and this morning it needed to be charged again, I only made 4 short calls. But I must say that I had my SE HBH-660 off all the time!!??. could this be the reason or the 3900.
P.S. I run my PDA2K with the Arabisation software, and I used to have a lot of hanging and freezing but after cooking the ROM and updating the Radio to 1.06.02 and replacing Caller ID 1.17 (in the extended ROM) with 1.20, it has been running without trouble (for three weeks) in spite of loading lots of other software.
I reckon removing Caller ID 1.17 from the Extended ROM was a good thing!!
ROM Version 1.31.00 WWE
ROM Date 12/13/04
Radio Version 1.06.02
Protocol Version 1337.38
ExtROM Version 1.31.112 WWE
Simple.
Mamaich
Does BT 3900 come with this version of audiogw.dll - 1.33g.00 or is this a sperate file file you have upgraded. If it is can you tell me where to get it from. Ive tried a search here and on google .
Out of interest how do you determine the dll version in pocketpc as this file doesn't come up in the bluetooth manager file list?
I'm using the HP headphones and am pretty happy but the quality is a bit scratchy when you put the XDA2s in your pocket, would be nice if this could be fixed.
Thanks
Wayne
wth said:
Mamaich
Does BT 3900 come with this version of audiogw.dll - 1.33g.00 or is this a sperate file file you have upgraded. If it is can you tell me where to get it from. Ive tried a search here and on google .
Click to expand...
Click to collapse
Uhh...did you read this thread?
The link is in here...
But ok, here it is again: ftp://xda-developers.com/BlueAngel/CAB_Files/Bluetooth Upgrades/
Look at the BT_Fix as wel...what version the audiogw.dll is, I am not sure, but I think the fix has the latest version.
Cheers,
Happy
HappyGoat - Uhh...did you read my question?
as wel...what version the audiogw.dll is, I am not sure, but I think the fix has the latest version
Click to expand...
Click to collapse
Sorry perhpas I didn't ask the question clearly enough, but what I was asking was.... Is that version of the audiogw.dll included in the 3900 patch?
I only asked as it was stated as a particular version and I dont know how to check the dll version info.
Thanks
Wayne
BT 3500 better than 3900
Yesterday evening I fully charged my PDA2k and this morning it needed to be charged again, I only made 4 short calls. But I must say that I had my SE HBH-660 off all the time!!??. could this be the reason or the 3900.
Click to expand...
Click to collapse
I had the same experience this weekend.
I used to charge it on Friday night and use ir regulary during the weekend with my HBH-600
This weekend, Sunday night battery was exhausted.
I also think that BT 3500 is more stable
audiogw.dll is not included in this one BroadcomCorp_BT1.0.0.3900.cab
Mine is eating power like i have never seen it done before.
Only think .3900 did for me, it's faster to end a conversation pushing the button on the Headset.
I have BT 3900 installed and don't have problems with battery. I have a bonded BT headset and BT activesync connection with PC.
Regarding audiogw. Fix_For_BT.sa.CAB has an updated TIBinaryParser.dll. It deals something with WiFi and BT coexistence. I don't use WiFi so I didn't notice any differences. This archive also has 1.35.00 audiogw.dll that has problems transferring call from headset to phone. I don't recommend installing it. It was taken from Harrier 1.35 ROM and is probably incompatible with other ROMs.
I've attached audiogw.dll that I'm currently using. It is 1.33g version.
I just need some clarification please. If I want to update my BT 3500 stack which of the following cabs should I install ? One of them or both and in what order ?
BroadcomCorp_BTUpdatefor1.0.0.3500.cab
Fix_For_BT.sa.CAB
firas said:
BroadcomCorp_BTUpdatefor1.0.0.3500.cab
Fix_For_BT.sa.CAB
Click to expand...
Click to collapse
You don't need any of these 2 CABs. The first is high quality audio/BT keyboard profiles update and the second is a buggy DLL from Harrier ROM that cause problems on other devices. You need ftp://[email protected]/BlueAngel/CAB_Files/Bluetooth Upgrades/BroadcomCorp_BT1.0.0.3900.cab and the attached CAB in my prev. post. You may install BroadcomCorp_BTUpdatefor1.0.0.3500.cab if you use BT keyboard or have headset that supports high quality audio profile. I have these 3 CABs installed for 3 days and don't have BT problems.
The 3900 file is remove from that directory. Any idea why it's been removed?
rikurn said:
The 3900 file is remove from that directory. Any idea why it's been removed?
Click to expand...
Click to collapse
Maybe someone thought it was funny to delete it.
It's back there now.
Has 3900 improved static?
Has anybody with a PDA2k installed BT3900 to improve static on their BT headset with any success? I'm currently on 3500 through the imate ROM build, and can pair with my HS-850, but the static is pretty bad regardless of the range.
I have an Orange SPV M2000 (HTC Blue Angel) device. It will not connect to any bluetooth hands free car kit. (I even have problems pairing it with a bluetooth motorola headset) Having read some of the posts you guys all seem incredibly switched on so think this post may be misguided. However I think that I have tried everything!
ROM; 1.40.00, ROM date, 03/10/05,Operator version 5.40.1.179, Radio version 1.06.02, Protocol 1337.38, EXT ROM version 1.40.179 WWE.
Has anyone got any suggestions for a novice?
Have you installed tomtom6????
Ignore me, forgot I used the search option and so didnt look at the date!!!
I have an Orange SPV M2000 (HTC Blue Angel) device. It will not connect to any bluetooth hands free car kit. (I even have problems pairing it with a bluetooth motorola headset) Having read some of the posts you guys all seem incredibly switched on so think this post may be misguided. However I think that I have tried everything!
ROM; 1.40.00, ROM date, 03/10/05,Operator version 5.40.1.179, Radio version 1.06.02, Protocol 1337.38, EXT ROM version 1.40.179 WWE.
Has anyone got any suggestions for a novice?