Hello,
i have a little problem, I tried to upgrade my VPA III (BlueAngle from Vodafone) to a version with Blackberry support. I do that with the rom_upgrade_mda3.exe from t-mobile. After this upgrade failed I only see the bootloader (serial/usb v2.07). Now I not posible to get an working OS on the PDA.
What I tried to now.
* Dump an image to a SD card. But I get the error section=3, not allowed, update
* run the rom_upgrade_mda3.exe again, I get the error 120 contry ID error
* run xda3nbftool to change the operator ID, but I get the same error (120) again only th last digits change. (45-45-xxx-xxx-...).
Now my question have somebody a working XXXX.nb1 file or know somebody which -so an -sl flag is to use in xda3nbftool for vodafone in germany .
Please help me, thank's
Best regards.
IHWTL
bootloader screen after upgrade
I have the same problem. Please Help.
Phone specs:
Qtek9090
No operator
DANGA001 (at the beginning)
WWE
Me too!!!! HELP!
How it worked for me
I had the same problem...
http://www.ppc-welt.info/community/showpost.php?p=490144
Related
Hello there,
I'm trying to help out a friend - he has his MDAIII stuck in the bootloader from a crashed ROM Upgrade.
I am familiar with the ROM upgrade process but I don't know what the Country Code ID is for his device. It is the T-Mobile Branded MDAIII which he bought from eBay.
If anyone has this type of phone could they please find out this info please. You can do this by running the attached file on your device. Then please post the text out of the file stored in \windows\DeviceData.txt (this too is on your device).
Can anyone help me/my mate?
Thanks,
Dom
FYI: Man has the same problem
http://forum.xda-developers.com/viewtopic.php?t=15168&start=25
UK country code
I ran the GetDeviceData on my T-Mobile UK MDAIII and it returned this:
PH20B 0 B ENG G T-MOB005 1.06.00 0 0 1.06.117 1.00.00 00.00
So I guess the country code is T-MOB005. :?
Hi,
I just bought a year old T-Mobile MDA111 from Germany and need to change the operating system to WWE. I downloaded the Getdevicedata.exe file but cant seem to get it to work (probably since i dont understand german!). I tried copying it to ( \Windows\Start Menu\Programs\XDA-Tools\ ) but couldnt find \XDA-tools. Even when i saved it in programs and ran it from there it did not work.
I managed to figure out the following though:
Model: PH20B
Language: GER
Oerator code: T-MOB 101
ROM: 1.06.01
Ext. ROM: 1.06.115
Radio: 1.00.00
Could anyone help me!!
Re: I've read the Getting Started section but im still stuck
xummy111 said:
Hi,
I just bought a year old T-Mobile MDA111 from Germany and need to change the operating system to WWE. I downloaded the Getdevicedata.exe file but cant seem to get it to work (probably since i dont understand german!). I tried copying it to ( \Windows\Start Menu\Programs\XDA-Tools\ ) but couldnt find \XDA-tools. Even when i saved it in programs and ran it from there it did not work.
I managed to figure out the following though:
Model: PH20B
Language: GER
Oerator code: T-MOB 101
ROM: 1.06.01
Ext. ROM: 1.06.115
Radio: 1.00.00
Could anyone help me!!
Click to expand...
Click to collapse
I managed to find the DeviceData.txt which gave me the following - PH20B O B GER R T-MOB101 1.06.01 01 1.06.115 1.00.00 00.00
I have now downloaded the following : BA_TMUK_14200_112_11300_Ship
I also managed to use editfix.bat to edit the correct details and i dont think i saw any errors.
BUT.... once i tried running BAUpgrade, i got this error - Radio Image file checksum error
What now??
The 1.42 rom that you downloaded is a type II rom thus the editfixbat will not work (you will get an ERROR in the dos window).
The best is just follow the upgrage instructions of the 1.42 rom as per wiki, it will work and you will end up with a WWE device that is branded by that operator.
Then all you need to do is play in wiki the extended rom kitchen.
Thanks,
Since that post, i tried updating to the current German T-Mobile ROM and this was successful.
Do you think i would be able to manage just the same if i download the Dutch or UK version and work with those? I am currently downloading the following:
ftp://xda:[email protected]_11300_SHIP/BA_TMNL_14200_115_11300_Ship.exe
Dear MDA111user, i hate bothering people but you seem to be the one who can really help me!
I followed the upgrade instructions as per wiki as you told me but i am still getting errors. Do you know which would be the best ROM to use since i need to change language from GER to WWE?
For your info the current status of my MDA111 is as follows:
Oper : T-Mob 101
sold as: MDA111
Shipped Lang: GER
Hardware Keyboard: QWERTZ
SIM was: Unlocked
Shipped Version:
CE = 1.06.01
ExtRom= 1.06.115
Radio= 1.00.00
Shipped GetDeviceData.exe/DeviceData.txt info
PH20B O B GER R T-MOB101 1.06.01 01 1.06.115 1.00.00 00.00
Last know Offical update:
1.42.01 1.42.116 1.13.00
Offical web downlaod site:
T-mobile.de
Last know upgrade that worked
As above
Upgraded on:
19.01.2006
There is no BEST rom, some of us like the 1.31 others 1.40 and others the 1.42. Can't tell you what to do only what I have done, and I have had them all.
Can't help you on the errors unless you tell me what they are. The wiki update page is tried and tested and works, well did for me and many others.
The getting started was written based on Type I roms, Now we have type II and we bypass the county code error with the MA_noID....exe file.
So if you want more help you need to tell us what you have done and what went wrong.
hi can any body help me to flash my german blueangel back to his original firmware. but the problem is to get the device into the bootloarder. i can´t press the power button to get the device into the bootloader . have anybody a tool to get dhe device into the bootloader per software ???
sorry formy very bad english
thx for help
greez
As far as i know there is no software that can do that button emulation. I suggest you go to the nearest service center to replace your button
---
i have this read in the wiki here
BaUpgradeUt.exe = The Upgrade Program
EnterBL.exe = Puts the device into the Bootloader Program
GetDeviceData.exe = If run on the device it will generate \windows\DeviceData.txt
HTCRUU.conf =Config file used by BaUpgradeUt.exe
HTCRUU.dll = used by BaUpgradeUt.exe (I think)
ms_.nbf = Extended ROM
nk.nbf = OS ROM
radio_.nbf = Radio ROM
but why ist did not work ???
please help me
greez Capone
Hi everyone
I'm new on this so be kind please
I have a MDA Vario (great pda) on english
ROM 2.17.7.2 WWE
i do want to flash it to 2.18 on Dutch, when i do i get a VENDER ID error.
So i used Awizard to unlock the CID first en then option W to flash the rom. I use 1.13 beta 2.
But when i select it (optionW) there are no ROM's availlable i have extraxt the ROM package in the ROM dir.
It is a nk.nbf file and when i am reading other threads i seem to need a *. NBA file ??
Anyone have a clue ?
Many thanks
Dave
The netherlands
Just unlock the CID and upgrade it with the Rom Update Package (the executable with the Rom and update program).
Should work without any problems.
Good luck.
Hi,
My charmer is stuck at the bootscreen after trying to flash the charmer_touch rom. First I did a cid unlock and then the update. It finished without errors.
Then I flashed the official AKU3 update from tmobile (because the charmer is tmobile germany branded). Flashed without problems (in bootloader mode) but then the same problem! Even with the AKU 2.x update.
When trying to hardreset I only get "format error".
What can I do?
Thanks in advance.
Read this:
http://forum.xda-developers.com/showpost.php?p=1340773&postcount=32
Hi,
Thanks, this looks great. But I can't find a no-id ruu.
So... where can I find it?
Here:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Yeah, thanks. How can I integrate it in the RUU package? Because when I unpack the update and start it from somewhere of my HDD it won't work! Where is the standard directory to run it from?
Any idea?
you should place it in the same folder where the contents of the RUU were unpacked
rgs
The problem is, that I cant see/decide where the RUU is unpacking itself. When it unpacks and waits for my input, I tryed searching for the files that were unpacked, but no luck! Strange.
So, nevermind the previous problem with paths... figured it out (path was too long)
My new problem:
Updated with the no-id ruu but still format error what now?
Worked fine with prophet rom. CLOSED.
Megabug said:
So, nevermind the previous problem with paths... figured it out (path was too long)
My new problem:
Updated with the no-id ruu but still format error what now?
Worked fine with prophet rom. CLOSED.
Click to expand...
Click to collapse
can you tell me the rom you take to fix it
have the same problem Format failed and stop @ boot screen
http://www.tm-phonedownloads.com/download_manager_mda_com2.html
try this one and tell me
after 1 % i get an nbf file error
i have
ipl 3.08
spl 3.08.0000
gsm 02.69.21
os 3.8.2.22
after hard reset i get format failed
what can i do??
i fix it
i get unlock code from imei-check
then CID unlock
and then i make sd card backup with MTTY_updateROM.exe
after next start it copy all back to the mda and now its all ok
and now format works
Charmer Stuck At Splash Screen
vlodeck said:
Here:
http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Click to expand...
Click to collapse
CHARMER STUCK AT SPLASH SCREEN
--------------------------------------------------------------------------------
I HAVE A MDA COMPACTII ''MADE IN TIWAN'' I WITCH WM5 I WANT TO UPGRADE IN TO WM6 SO I UPGRADE THIS WM6 TouchFLO Charmer WM6 ver. 2.1 FINAL by vlodeck AT THIS HOME PAGE http://forum.xda-developers.com/show...harmer+cert_sp... AFTER THIS I HARD RESET MY MDA C2 ITA ON BUT THE LANGUAGE IS NOT ENGLISH I CANNOT UNDERSTAND ....
SO I CAN REFLASH IT WITH THIS ROM Charmer_Touch_GER_Beta_2.7 .. AFTER FLASHING COMPLETE I SOFT RESET MY MOBILE.
SO MY MOBILE STUCK ON SPLASH SCREEEN ONLY T-MOBILE IS SHOW
MY MOBILE DETAIL IS AS UNDER
IPL 2.06 .0001
SPL 2.06 .0001
GSM 02.19.21
OS 4.0.0.0
PLZ DEAR SIR WHAT IS SOLUTION OF MY MDA C2
ACTIVE SYNC NOT CONNECTED WITH MY MDA C2