Hello,
i have a little problem, I tried to upgrade my VPA III (BlueAngle from Vodafone) to a version with Blackberry support. I do that with the rom_upgrade_mda3.exe from t-mobile. After this upgrade failed I only see the bootloader (serial/usb v2.07). Now I not posible to get an working OS on the PDA.
What I tried to now.
* Dump an image to a SD card. But I get the error section=3, not allowed, update
* run the rom_upgrade_mda3.exe again, I get the error 120 contry ID error
* run xda3nbftool to change the operator ID, but I get the same error (120) again only th last digits change. (45-45-xxx-xxx-...).
Now my question have somebody a working XXXX.nb1 file or know somebody which -so an -sl flag is to use in xda3nbftool for vodafone in germany .
Please help me, thank's
Best regards.
IHWTL
bootloader screen after upgrade
I have the same problem. Please Help.
Phone specs:
Qtek9090
No operator
DANGA001 (at the beginning)
WWE
Me too!!!! HELP!
How it worked for me
I had the same problem...
http://www.ppc-welt.info/community/showpost.php?p=490144
Hi everyone
I'm new on this so be kind please
I have a MDA Vario (great pda) on english
ROM 2.17.7.2 WWE
i do want to flash it to 2.18 on Dutch, when i do i get a VENDER ID error.
So i used Awizard to unlock the CID first en then option W to flash the rom. I use 1.13 beta 2.
But when i select it (optionW) there are no ROM's availlable i have extraxt the ROM package in the ROM dir.
It is a nk.nbf file and when i am reading other threads i seem to need a *. NBA file ??
Anyone have a clue ?
Many thanks
Dave
The netherlands
Just unlock the CID and upgrade it with the Rom Update Package (the executable with the Rom and update program).
Should work without any problems.
Good luck.
I got an email today from a user who tried my HTC Hermes Unlocker on HTC MTeoR, he says this:
I have checked the Breeze (HTC MTeoR) has the same Processor/ Chipsets Qualcomm MSM6275 as the HERMES, I guessed that radio ROM is the same since both devices use Qualcomm MSM6275, and it is possible to flash an Hermes radio ROM on the Breeze.
I have flashed your patched radio ROM for the Hermes in Breeze and it works: I have unlocked it and I have got SuperCID!!
Click to expand...
Click to collapse
I don't have a MTeoR and I can't test it, and I advice you not to try it unless you are an experienced user and are familiar with upgrading roms on HTC devices.
I downloaded a Breeze ROM upgrade and extracted the radio (GSM.nb) from it and it is exactly the same size as on the Hermes (14155776 bytes), the bootloader from the Breeze (SPL 2.05) is also based on the same common base version as the Hermes 1.04 bootloader, so the bootloader commands should be the same and MaUpgradeUt_NoID.exe will actually flash the radio rom on it.
Code:
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
If anyone has the balls to try it, let me know if it works, but always at your own risk and keep in mind that IF THIS DOESN'T WORK YOU CAN BRICK YOUR DEVICE!!!!
Yep, I can confirm that.
Just flashed Radio on my Mteor with this update.
In System information I have now:
Protocol version: 32.49.7018.00W
Radio version: 1.13.00.00
And system works without any problems...
This is first updater that did work on my mteor, other ROM updates always stops at 0% and 262 error... Do you think that it would be possible to upgrade ROM on mteor, with rom from ie. sp-jas or dopod595, but using RUU from Hermes?
just to be fair:
MTeOR can be updated to SP-JAS (or any others) rom using straight forward rom update procedure.
same as with Hermes (bootloader 1.04).
ROM upgrade procedure for Hermes with 1.04 bootloader is well known..
Yeah... but problem in my situation is that i have OS in 0.94 and bootloader in 1.00 version. And as i posted in other topic, every RUU that i try to run gives 262 error update and phone stops with "0% upgrade completed" screen...
After above update i have SuperCID, phone is application unlocked... but nothing changes, same error.
you will have to change your bootloader then.
artinu said:
Yep, I can confirm that.
Just flashed Radio on my Mteor with this update.
Click to expand...
Click to collapse
Thanks for the confirmation! Seems that both devices Hermes and Breeze share the same radio
artinu said:
This is first updater that did work on my mteor, other ROM updates always stops at 0% and 262 error... Do you think that it would be possible to upgrade ROM on mteor, with rom from ie. sp-jas or dopod595, but using RUU from Hermes?
Click to expand...
Click to collapse
I guess that's because you're on a preproduction bootloader. Your bootloader has 'wdata' command and production bootloader has 'wdatah' command. Have you tried flashing from SD card? Format the card in FAT32, take any Breeze upgrade and name it BREEIMG.nbh, put it on the root folder of the emty SD card and start the phone in bootloader mode. You should see 'reading image...' and it will ask you to start flashing it if this method works on your bootloader. This works on some Hermes preproduction bootloaders (>=0.95) I guess for the Breeze is the same.
For what I see, the Breeze is quite similar to the Hermes, most of the info on the Hermes wiki should be also valid for the Breeze. I suggest you to run HHD USB monitor while upgrading, you will see the bootloader errors and why it doesn't flash your unit. Feel free to ask me if you need more help with this.
I've also just flashed Radio 1.20.X from the Hermes into my breeze... works!!!
Did you just download the Hermes 1.20 radio from the ftp site and run it ?
mingw said:
Did you just download the Hermes 1.20 radio from the ftp site and run it ?
Click to expand...
Click to collapse
Yes... However, I still have some issues, probably not related to the radio but to the ROM. I'll give a try to radio 1.16 later today.
Could you please detail Breeze Radio firmware upgrade procedure to Hermes Radio frimware 1.20?
I have tried and failed. here is the error description:
ERROR 150 : ROM UPGRADE UTILITY ERROR
The ROM ugrade utility does not designed for your device.
PLease get proper ROM upgarde utili and try again!
UPDATE
never mind
you need to enter bootloader manualy before runing upgrade utility.
on HTC Breeze to enter bootloader mode manually:
switch off device. now pres POWER +CAMERA + INSERT USB CABLE.
I have flashed Hermes Radio firmware 1.20.xx to my Breeze successfuly.
XzaniX said:
Yes... However, I still have some issues, probably not related to the radio but to the ROM. I'll give a try to radio 1.16 later today.
Click to expand...
Click to collapse
I've not flashed Radio 1.16
I have since several days a problem that the phone either sows: No Service or does not ring nor receives SMS, but I'm allowed to place a call. Switch Phone off and then On again with Comm Manager, solves the problem.
These problems only showed up since few days, about 1 week, but before the Radio upgrade, so these are not Radio related but didn't disapear after Radio 1.20 upgrade. I'll now try with Radio 1.16...
Running now Radio 1.16 and had no issue since the upgrade... maybe this Radio ist more stable that 1.20... I'll keep an eye on it... and you posted.
Since upgrading to the Hermes stack 1.20 I've been unable to run any of the previous upgrades. Just hangs at 0% and the comes back with a 262 error.*Here's the ruu.log
11:40:30:051 [msg] : Version : [5.10 - 20060412].
11:40:30:201 [msg] : Current in CE Mode.
11:40:34:638 [msg] : Device BL VER : [] [].
11:40:34:638 [msg] : =============================================
11:40:34:638 [msg] : START GetNBHInfo !
11:40:34:648 [msg] : END GetNBHInfo !
11:40:40:466 [msg] : Ac Info : [1] [50] [100].
11:40:40:476 [msg] : Check Ac in CE mode. AC : [1]
11:40:40:476 [msg] : IsBL. BL : [0]
11:40:44:872 [msg] : Enter BL OK.
11:40:49:048 [msg] : Disconnect ActiveSync .... [2]
11:40:49:048 [msg] : Start Get Connect Port.
11:40:49:279 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
11:40:58:592 [msg] : Device BL VER : [2.05] [].
11:41:00:615 [msg] : =============================================
11:41:00:655 [msg] : START UpdateNBH !
11:41:02:107 [msg] : Upgrade 1 : 0 Start.
11:44:07:815 [err] : Receive Data Error :0x605 .
In a Htc MtEor (Breeze) I can't get a unlock code to simlock. I upgrade my rom and my radio version is 1.16.00.10. I only can insert a sim of vodafone.
-------------------
Sorry about my english because is toooooooo poor!!
nandex: after you upgrade to the patched 1.16 radio, the unlock code is 22051978.
I can't upgrade to radio version 1.16.00.69
I have rom version: 1.30.251.1
protocol version: 32.53.7018.01H
radio version: 1.16.00.10
When I enter in safe mode ( red, green, ....) i can read ( BREE100 IPL-1.00, BREE100 SPL-1.07.0000)
I enter a sim of Orange and this unlock code and my htc mteor says NON!
I cant upgrade radio version, I cant upgrade or degrade rom version. My Htc has the control now
When I would to upgrade rom it takes me a Invalid Country id .
Help Help
My phone is in the same situation.
I am simply trying to upgrade the ROM.
I have "BREE100 IPL-1.00 BREE100 SPL-1.07.0000" and three colour screen.
I run the RUU I have tried.
RUU_BREE100_1.30.251.1_1.16.00.10_HTCEUR_Ship
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3
RUU_BREE100_1.15.71.6_1.06.00.00_OCH_Ship
roms. but none work, its crashed half way thorugh upgrading the ROM on my HTC Mteor.
None its stalls on 0% upgrade and shows
ERROR [294] : INVALID VENDER ID
which the RUU read me says
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Anyone help ?
Help me.
I've tried radio upgrade (as reported by POF, using Mermes procedure):
previous situation
Model Breeze
Bootloader SPL 2.05
Radio version 1.06.00.00
actual situation
radio version 1.16.00.00 (by MaUpgradeUt_noid.exe)
But, when i try execute Herm_unlock_v2(or V2a) i read on display "error, this tool cannot be used on this device".
How can i complete unlock?
I think a need to resolve this last step before insert code (220151978) to unlock sim.
Please help me.
Kablo said:
But, when i try execute Herm_unlock_v2(or V2a) i read on display "error, this tool cannot be used on this device".
Click to expand...
Click to collapse
HERM_Unlock_v2a.exe checks MODEL ID and only runs on Hermes, however you can unlock your Breeze by putting another SIM card and entering any unlock code after you've flashed the patched radio.
On my Mteor, the MAUPGRAD... hangs at 0% and eventually times out. This happens no mater which radio ROM I am trying to flash. Any thoughts on how to get this to work? Seems like I need to use the ROM upgrade utility for mteor and Hermes ROM.
i've got a problem with my BA when i try to flash my ROM, everytime there is a problem with : COUNTRY ID ERROR which is CID, I have tried to unlock it with lookwiz which i have found here, but it didn't help me please help me how to upgrade my Qtek to wm5 or wm6... Thanks
So, here are some info about my ROM :
Model = PH20B
ROM-version = 1.22.01 GER (wrrrr, i don't like german, cuz' i don't know it)
RADIO-version = 1.06.00
Ext-ROM-version = 1.22.115 GER
Protokoll-version = 1337.38
------------------------------
please help me
first, read wiki
second, if you still not find an answer try MaUpgradeUT_NOID.exe for upgrade
I was trying to upgrade my phone from 1.16.251.1 to the 1.34.251.1 version.
I got as far as finding the firmware with the two .exe files (one which installs the SPL 1.10 and the other with the 1.34 firmware) but my phone has crashed and, whilst it will go into Bootloader I can't seem to get it to complete an upgrade (bombs out at 1% with "vendor" error). I'm happy to take it back to an earlier version but I figure because it's got SPL 1.10 on it that I need to rewind this too?
Anyone got any suggestion and could point me in the direction of the SPL or actual firmware to try?
Many thanks.
PS. Hard reset doesn't work either.
Same problem
Well my MTeoR/Breeze is also bricked when trying to upgrade to latest rom - but my upgrade went well, but now i'm stuck i splashscreen.
In bootloader SPL1.10 I get this:
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
When reading about this on HERMES this is not good - unless someone can provide a rom/bootloader with CID: F
Cmd>task 32
Level = FF
Cmd>checkimage
IPL CRC checksum = 0x9352B5E9
SPL CRC checksum = 0x34258312
CE CRC checksum = 0x8176DBC9
ExtROM is None.
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
So the radio is probably dead
password seems to be static - it is written i clear text in the .nbh file.
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCEPassWord: BsaD5SeoA
When i try to upgrade i will get an invaild vender id because my cid is all wrong.
Any ideas? besides calling support?
Hi, i have the same problem as you. It arrives because i flashed the SPL (2.05 to 1.09). Now i'm looking for a SPL nbh file version 2.05.
I hope it will works because i tried everything. ++
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3 contains the 2.05 SPL, as far as i know you cannot flash your device as long as you don't have a .nbh file that matches your CID - correct me if i'm wrong.
What is your CID?
How could we know what CID we have got ? Thanks a lot. ++
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
once you are able to communicate with your breeze from putty or mtty type info 2 or getdevinfo