Related
I got an email today from a user who tried my HTC Hermes Unlocker on HTC MTeoR, he says this:
I have checked the Breeze (HTC MTeoR) has the same Processor/ Chipsets Qualcomm MSM6275 as the HERMES, I guessed that radio ROM is the same since both devices use Qualcomm MSM6275, and it is possible to flash an Hermes radio ROM on the Breeze.
I have flashed your patched radio ROM for the Hermes in Breeze and it works: I have unlocked it and I have got SuperCID!!
Click to expand...
Click to collapse
I don't have a MTeoR and I can't test it, and I advice you not to try it unless you are an experienced user and are familiar with upgrading roms on HTC devices.
I downloaded a Breeze ROM upgrade and extracted the radio (GSM.nb) from it and it is exactly the same size as on the Hermes (14155776 bytes), the bootloader from the Breeze (SPL 2.05) is also based on the same common base version as the Hermes 1.04 bootloader, so the bootloader commands should be the same and MaUpgradeUt_NoID.exe will actually flash the radio rom on it.
Code:
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
If anyone has the balls to try it, let me know if it works, but always at your own risk and keep in mind that IF THIS DOESN'T WORK YOU CAN BRICK YOUR DEVICE!!!!
Yep, I can confirm that.
Just flashed Radio on my Mteor with this update.
In System information I have now:
Protocol version: 32.49.7018.00W
Radio version: 1.13.00.00
And system works without any problems...
This is first updater that did work on my mteor, other ROM updates always stops at 0% and 262 error... Do you think that it would be possible to upgrade ROM on mteor, with rom from ie. sp-jas or dopod595, but using RUU from Hermes?
just to be fair:
MTeOR can be updated to SP-JAS (or any others) rom using straight forward rom update procedure.
same as with Hermes (bootloader 1.04).
ROM upgrade procedure for Hermes with 1.04 bootloader is well known..
Yeah... but problem in my situation is that i have OS in 0.94 and bootloader in 1.00 version. And as i posted in other topic, every RUU that i try to run gives 262 error update and phone stops with "0% upgrade completed" screen...
After above update i have SuperCID, phone is application unlocked... but nothing changes, same error.
you will have to change your bootloader then.
artinu said:
Yep, I can confirm that.
Just flashed Radio on my Mteor with this update.
Click to expand...
Click to collapse
Thanks for the confirmation! Seems that both devices Hermes and Breeze share the same radio
artinu said:
This is first updater that did work on my mteor, other ROM updates always stops at 0% and 262 error... Do you think that it would be possible to upgrade ROM on mteor, with rom from ie. sp-jas or dopod595, but using RUU from Hermes?
Click to expand...
Click to collapse
I guess that's because you're on a preproduction bootloader. Your bootloader has 'wdata' command and production bootloader has 'wdatah' command. Have you tried flashing from SD card? Format the card in FAT32, take any Breeze upgrade and name it BREEIMG.nbh, put it on the root folder of the emty SD card and start the phone in bootloader mode. You should see 'reading image...' and it will ask you to start flashing it if this method works on your bootloader. This works on some Hermes preproduction bootloaders (>=0.95) I guess for the Breeze is the same.
For what I see, the Breeze is quite similar to the Hermes, most of the info on the Hermes wiki should be also valid for the Breeze. I suggest you to run HHD USB monitor while upgrading, you will see the bootloader errors and why it doesn't flash your unit. Feel free to ask me if you need more help with this.
I've also just flashed Radio 1.20.X from the Hermes into my breeze... works!!!
Did you just download the Hermes 1.20 radio from the ftp site and run it ?
mingw said:
Did you just download the Hermes 1.20 radio from the ftp site and run it ?
Click to expand...
Click to collapse
Yes... However, I still have some issues, probably not related to the radio but to the ROM. I'll give a try to radio 1.16 later today.
Could you please detail Breeze Radio firmware upgrade procedure to Hermes Radio frimware 1.20?
I have tried and failed. here is the error description:
ERROR 150 : ROM UPGRADE UTILITY ERROR
The ROM ugrade utility does not designed for your device.
PLease get proper ROM upgarde utili and try again!
UPDATE
never mind
you need to enter bootloader manualy before runing upgrade utility.
on HTC Breeze to enter bootloader mode manually:
switch off device. now pres POWER +CAMERA + INSERT USB CABLE.
I have flashed Hermes Radio firmware 1.20.xx to my Breeze successfuly.
XzaniX said:
Yes... However, I still have some issues, probably not related to the radio but to the ROM. I'll give a try to radio 1.16 later today.
Click to expand...
Click to collapse
I've not flashed Radio 1.16
I have since several days a problem that the phone either sows: No Service or does not ring nor receives SMS, but I'm allowed to place a call. Switch Phone off and then On again with Comm Manager, solves the problem.
These problems only showed up since few days, about 1 week, but before the Radio upgrade, so these are not Radio related but didn't disapear after Radio 1.20 upgrade. I'll now try with Radio 1.16...
Running now Radio 1.16 and had no issue since the upgrade... maybe this Radio ist more stable that 1.20... I'll keep an eye on it... and you posted.
Since upgrading to the Hermes stack 1.20 I've been unable to run any of the previous upgrades. Just hangs at 0% and the comes back with a 262 error.*Here's the ruu.log
11:40:30:051 [msg] : Version : [5.10 - 20060412].
11:40:30:201 [msg] : Current in CE Mode.
11:40:34:638 [msg] : Device BL VER : [] [].
11:40:34:638 [msg] : =============================================
11:40:34:638 [msg] : START GetNBHInfo !
11:40:34:648 [msg] : END GetNBHInfo !
11:40:40:466 [msg] : Ac Info : [1] [50] [100].
11:40:40:476 [msg] : Check Ac in CE mode. AC : [1]
11:40:40:476 [msg] : IsBL. BL : [0]
11:40:44:872 [msg] : Enter BL OK.
11:40:49:048 [msg] : Disconnect ActiveSync .... [2]
11:40:49:048 [msg] : Start Get Connect Port.
11:40:49:279 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
11:40:58:592 [msg] : Device BL VER : [2.05] [].
11:41:00:615 [msg] : =============================================
11:41:00:655 [msg] : START UpdateNBH !
11:41:02:107 [msg] : Upgrade 1 : 0 Start.
11:44:07:815 [err] : Receive Data Error :0x605 .
In a Htc MtEor (Breeze) I can't get a unlock code to simlock. I upgrade my rom and my radio version is 1.16.00.10. I only can insert a sim of vodafone.
-------------------
Sorry about my english because is toooooooo poor!!
nandex: after you upgrade to the patched 1.16 radio, the unlock code is 22051978.
I can't upgrade to radio version 1.16.00.69
I have rom version: 1.30.251.1
protocol version: 32.53.7018.01H
radio version: 1.16.00.10
When I enter in safe mode ( red, green, ....) i can read ( BREE100 IPL-1.00, BREE100 SPL-1.07.0000)
I enter a sim of Orange and this unlock code and my htc mteor says NON!
I cant upgrade radio version, I cant upgrade or degrade rom version. My Htc has the control now
When I would to upgrade rom it takes me a Invalid Country id .
Help Help
My phone is in the same situation.
I am simply trying to upgrade the ROM.
I have "BREE100 IPL-1.00 BREE100 SPL-1.07.0000" and three colour screen.
I run the RUU I have tried.
RUU_BREE100_1.30.251.1_1.16.00.10_HTCEUR_Ship
RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR_Ship_R3
RUU_BREE100_1.15.71.6_1.06.00.00_OCH_Ship
roms. but none work, its crashed half way thorugh upgrading the ROM on my HTC Mteor.
None its stalls on 0% upgrade and shows
ERROR [294] : INVALID VENDER ID
which the RUU read me says
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Anyone help ?
Help me.
I've tried radio upgrade (as reported by POF, using Mermes procedure):
previous situation
Model Breeze
Bootloader SPL 2.05
Radio version 1.06.00.00
actual situation
radio version 1.16.00.00 (by MaUpgradeUt_noid.exe)
But, when i try execute Herm_unlock_v2(or V2a) i read on display "error, this tool cannot be used on this device".
How can i complete unlock?
I think a need to resolve this last step before insert code (220151978) to unlock sim.
Please help me.
Kablo said:
But, when i try execute Herm_unlock_v2(or V2a) i read on display "error, this tool cannot be used on this device".
Click to expand...
Click to collapse
HERM_Unlock_v2a.exe checks MODEL ID and only runs on Hermes, however you can unlock your Breeze by putting another SIM card and entering any unlock code after you've flashed the patched radio.
On my Mteor, the MAUPGRAD... hangs at 0% and eventually times out. This happens no mater which radio ROM I am trying to flash. Any thoughts on how to get this to work? Seems like I need to use the ROM upgrade utility for mteor and Hermes ROM.
ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Navyaz05 said:
ROM version: 2.18.0.0 WWE
Radio version: 02.25.11
ExtROM version: Faria v5.0
SIM Unlocked
CID Unlocked
Ok, so heres the deal. I've been reading thru the forums for the past two day, and have got nothing but a headache. Keep in mind that I'm fairly new to this. I managed to get WM6 Faria v5.0 on my phone after a few hours of fidiling around
What I'd like to put on my phone is NBD, not sure which version tho. I have it downloaded onto my computer, but when i got to flash it. It come up with Error 208, File Error or something to that nature. Anyone have any advice, or where i can find a very good guide on how to do it? Any help would be appreciated
Click to expand...
Click to collapse
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck
zabardast_1 said:
as you say that your device is SIM/CID unlocked and already using wm6 Faria rom,then I don't think there shud be any problem upgrading to any other new rom,as to the error 208,wud you plz post the exact error what it says,if it say it's a file error...can be related to a missing file called enterbootloader.exe. ,then most probably the file you downloaded is corrupt.which NBD rom you have downloaded.download latest NBD Rom from here and try to flash.
For NBD 9.2
http://forum.xda-developers.com/showthread.php?t=325284
For latest NBD X
http://forum.xda-developers.com/showthread.php?t=335178
But I'll also advice you to flash back again T-mobile 2.26 to have a clear solid base again to start off for upgrading to new rom,it wud give you the advantage of clearing any misappropriations happened during your first install of Faria Rom as it is quite old build.flashing t-mobile 2.26 will give you a new clean base to upgrade make's sure your extended_rom is clean and uncorrupted, it causes all kinds of problems .sure you'll be fine good luck[/QUOTEA
Ok so I'm downloading NBD V9.2. Now after I flash back to 2.26, then flash the NBD V9.2, am i still going to have the Tmobile look? Just for some reason that really bugs me.
Click to expand...
Click to collapse
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Navyaz05 said:
Ok so i flashed back to tmobile 2.26 then tried flashing NBD 9.2 and still got Error 208 "File Open Error". So then i tried Flashing from bootloader, the Red, Green and Blue screen and then i got Error 240 "File Open Error". I downloaded NBD 9.2 from the link you provided? You have any idea what the problem could be?
Click to expand...
Click to collapse
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Navyaz05 said:
ok when you flashed t-mobile 2.26 did it flash and loaded properly ?
secondly download latest official rom from your carrier's site and flash,ok
btw what is IPL/SPL....? showing at present
Yes, when i flashed to 2.26 it flashed and loaded just fine, no errors that i could tell. Official rom from my cell phone service provider or who i bought my cell phone from? And im not quite sure waht my IPL/SPL read cuz i flashed back to Faria v5.0
Click to expand...
Click to collapse
ok
ERROR [208] : FILE OPEN
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
as t-mobile 2.26 flashed and loaded good,than there's no problem with your bootloader,Ok,Now do this,remove your phone from the usb cable(disconnect it) and do a Hard reset of your phone by doing this :-
1. Press and hold the comm manager button and voice command button on the device together with one hand
2.Keep the two buttons pressed,and at the same time,with other hand,use the stylus to lightly press and hold the RESET button
the device will reboot and switch back on.
then delete active sync,reboot your PC,Run disk Clean wizard on Drive C:\ ,check all options in Disk Clean options,specially Temporary internet files and perform disk cleanup,after that delete all cookies in Internet options.
than download the latest version of Active sync ver 4.5 and install.
after this go into bootloader mode in your phone and connect to PC,but don't establish connection with Active sync,cancell the connection when it asks
when you connect witusb you'll see small usb showing at the bottom of bootloader screen (tri color screen) if it's there then open the rom file and try to flash,hope it'll be ok.
just post your present IPL/SPL...? it appears in red color when you switch on the phone and on the boot screen at the top.whatever the ipl/spl..? is there at the moment just post it,ok
I still believe the error 208 is due to some missing files,may be the NBD rom is getting some corruption
anyway you can also download official rom from the official site of your carrier ( the rom which came prinstalled when you bought the phone)
or download this rom and see if it flashes:-
http://forum.xda-developers.com/showthread.php?t=332544
Ipl/spl: 2.26
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Navyaz05 said:
Ok so I did everything you told me to do in your 2nd to last post : deleted activesync and clear cookies and did disk clean, and hard reseted my phone. Then i tried to flash both NBD and TNT and neither of them worked. So then i flashed back to my orignal rom, the one my phone came with. Then tried flashing both of them, and still nothing? I keep getting the Error 208
Current IPL/SPl are both 2.25
Click to expand...
Click to collapse
hmmm !
IPL/SPL 2.25 G3 AKU2 version,
ok,now tell me,when you flashed the original rom,was it successful,did it load up ? is your phone working normal with the original rom ?
I just feel as your phone is still not CID unlock,do one more thing,download this WST tool from the link below,install and run it,then post whatever report it generates,ok
http://forum.xda-developers.com/showthread.php?t=329170
Ah 1
so,when you flashed with T-mobile 2.26 you had ipl/spl 2.26,afterwards you flashed back with your original rom,is it cingular rom ? so ipl/spl 2.25 is registered. Both of these Roms T-mobile and original(cingular or ?) which you flashed are official roms.so only official roms are flashing and not the custom builds,hmm, so custom build rom can only be flashed if device is CID unlocked.
It means may be your device is still not CID unlocked ?
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Navyaz05 said:
But i did CID unlock, because thats how i got Faria v5.0 on my phone. Do I have to CID unlock everytime i flash?... Ok so i ran that program you told me to and heres what i got.
Wizard Service Tool v4.2
09/10/07 11:22:40
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: 356378003310489
=> Bootloaders:
IPL: 2.25 (G3 device)
SPL: 2.25 (G3 device)
Built on May 12 2006 at 00:37:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6e9dc4a2 - 9.99M (0x9fd800)
cea9b13a - 48.23M (0x303c000)
6fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
afb23fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000006f1e0103210403ea17060656
Key Index: 52
All Done.
Can I use the program above to CID unlock or do i have to you lokiwiz to unlock?
Thanks for the help, i really appreciate it!
O and BTW.. i check with that program, My phone is both CID/SIM unlocked
Click to expand...
Click to collapse
I do believe you that you did the cid unlock but lets be sure,on the wst tool there is a button with cid action written on it,hit it and tell me the report,ok
Reading CID block...
Calculating CID block sum...
CID checksum: 16A253F6
Decrypted stored sum: 4086926D7FFBD060
Decrypted calcd sum: 4086926D7FFBD060
Key index : 52 - Block index: 196
CIDkey: …øA‰òÏ5
CID IMEI: 356378003310489
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
go to this link,there is a attached file 'RUU MUN.zip' download it,then extract,there will be four files in it,ok now open the NBD 9.2 Rom compare there you will also similar named four files,now replace these files with the files downloaded in RUU MUN.zip,after replace run the new RomUpdateutility.lets see if works,ok
http://forum.xda-developers.com/showthread.php?t=334796
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Navyaz05 said:
ok im kinda confused.. you want me to replace the files from MUNN with the one in NBD, or vice versa?
Click to expand...
Click to collapse
replace the files from MUNN with the one in NBD,
just a hunch may be bootloader of your phone not accepting romupdateutility of NBD,lets replace and see,it might do the trick.
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Navyaz05 said:
you are awesome.... its loaded NBD... I guess it was a corrupted file. Now does this mean i can put TNT on my phone? If so will i have to replace those files?
Click to expand...
Click to collapse
YES YES YES !!!
You know it got be worried,how come every things fine,your phone is CID unlocked,you can flash T-mobile and official,than why not other custom roms,so I was convinced corrupted romupdatutility,
YUP ! go ahead fire up any wm6 now,I\ll suggest go for TNT excellent ro,see my sig using the same,anyway,i'm glade for you,take care.
Hi All,
I've want to upgrade my Qtek 9100 G3 to a newer IPL/SPL, so i followed the unlocking & Rom upgrade instructions on http://forum.xda-developers.com/showthread.php?t=285435 created by Dr Puttingham.
I was able do downgrade the Button 1.05 ROM version.
So far so good...
the next step (15) CID unlock did work.
Type the letter and press Enter: c
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
could not determine a key index
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: Unable to open host/destination file - The system cannot find the file specified.
result=80072746
Your phone is now CID unlocked....
See device information of wizard service tool:
=> Bootloaders:
IPL: 1.01 (G3 device)
SPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14406.1.1.1)
ROM: 5.1
Registry AKU: .1.1.1
Radio: 01.12.10
Protocol: 4.0.13.23
if i try to read the CID block from the phone i get an REX error : Current_CID has no value. in the REXX script named: at line number:1092.
I also tried to do this on command line of the qtek:
Cmd>r2sd all
***** user area size = 0x79B00000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
GetDeviceCID: Error - InitDecoder
GetDeviceCID: Error - InitDecoder
You didn't get the proper security level to download a specific image
Can someone give me a pointer where to look, or how to repair this problem.
Kind regards,
Marc
Update
To be complete i used the latest version of lokiwiz03a
Copying C:\qtek\lokiwiz03a\Lokiwiz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
could not determine a key index
Thanks for help.
You got a G3 device,why use lokiwiz03a,this version works best with G4 devices and can only generate a SIM unlocking code and doesn't CID unlock the phone.
If you want to SIM/CID unlock your phone,use lokiwiz02b.
As for the WST tool and REXX erorr,which version of WST tool are you using,download the latest version of WST 4.2 and read the thread of WST 4.2 about how to solve the REXX erorr,you have to delete certain old files of older version of WST tool.
Cheers!
The first post contains a screen dump of lokiwiz02b.
The program gave the same error: could not determine a key index.
In the update, I tried the latest version of lokiwiz to give a complete picture. And to be sure it's not a software version problem.
About the service wizard tool by Mestrini:
I'm using version 4.2.1 (2007-10-09) downloaded from:
http://forum.xda-developers.com/showthread.php?t=329170
This states that V4.2.1 (10-10-2007) is the latest version.
I search for the Rexx error : CID has no value, but was unable to find the solution you suggested. Could you please point me to the thread where this is discussed and solved...
Kind regards and thanks for the help,
Marc
Check out this post in the WST 4.2 Tool thread,hope you'll find all the answers here in this thread for your problems.
http://forum.xda-developers.com/showthread.php?t=329170&page=11
Cheers!
I've read the thread, but the problem that i have is probably related to a corrupted CID? The version of WST is not a upgraded version, so a clean install of version 4.2.1.
See WST screendump of SIM unlock action:
Decrypted stored sum: FFFFFFFFFFFFFFFF
Decrypted calcd sum: 769A5E63B0D4DE89
Checksums did NOT match!!
Could not determine a key index to decrypt it.
Your CID block must be corrupted or file isn't
from a valid CID dump!!
Aborting operation.
The feedback when i read the content of the ROM - zone: CID (bdk1) is all 0xFF. So this is probably what's wrong. But how to correct this problem?
Well,sry I'm no expert on this,its better you post this problem in the WST Tool thread or ask mestrini ,he's the best in here on these problems,I'm sure he'll find out the solution.
Good luck
@zabardast_1
tx for the compliment m8
@marcQ
I read your PM but i prefer to reply here since it might help others in the future.
i must say that it's such a coincidence that i was messing with WST version 4.2.2, which didn't happen for quite some time, and got your PM that lead me to solve another bug
As for your particular case i believe that you have a corrupted/empty CID block thus not allowing WST to read it nor lokiwiz to unlock it and the solution is to write a new one to it.
If WST's "Device Info" works use it to read the key index of your CID block, then go to the "Data Crashes" thread (check my signature) and download the matching CID file for your device.
In case you can't find out your key index write any CID file to your phone just to get the CID block back.
report back
cheers
mestrini
thanks m8
Pleasure is all mine
Yup ! No doubt,you're the maestro
Have a nice day !
Thank you both for the help.
I've managed to unlock my Wizard
Now let's see how upgrading goes...
marcQ said:
Thank you both for the help.
I've managed to unlock my Wizard
Now let's see how upgrading goes...
Click to expand...
Click to collapse
Grrrrrrrr8 !
You are most welcome,glade you got it working.
Good luck
marcQ said:
Thank you both for the help.
I've managed to unlock my Wizard
Now let's see how upgrading goes...
Click to expand...
Click to collapse
HEEYYYYY!!!! Aren't you going to say how you did it?
Come on! The purpose is to help others as well by sharing your procedures (or at least to let me know if my theory was correct)
waiting for report...
!!! USE THIS GUIDE ONLY IF YOU KNOW WHAT YOU ARE DOING !!!
!! READ THE END OF THE GUIDE FIRST(Very Importnat)
Aplication Unlock - lets you run unsigned software
SSPL - Software Second Program Loader is a boot loader after IPL (Initial Program Loader) often seen on smart phones and PDA:s.
- Lets you flash any rom on the phone
SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
[B]official HTC ROMS[/B]
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
UNLOCK TOOLS
http://rapidshare.com/files/105133496/Unlock_HTC.rar.html
1. Folder "1"
put the file "SP_AllowCertificateInstall.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
2.Folder "2"
make sure you are connected to the phone threw active sync. Now run "EnableRAPI.bat" it will say if
it has succeded.
3.Folder "3"
make sure you are connected to your mobile phone through active sync. Start "MobileRegisteryEditor.exe"
Now go to SPV_C600 than HKEY_LOCAL_MACHINE than Security than Policies than Policies
so that you are in HKEY_LOCAL_MACHINE\Security\Policies\Policies
Now dubble click 00001001 (the first one after (Default)) and change the value to 1
Now dubble click 00001005 (the second one after (Default)) and change the value to 40
4.Folder "4"
put the file "Cert.cab" into the temp folder on you mobile phone (use active sync)
to connect. Execute the cab file on your phone.
5.Folder "5"
install and run HTC Security Manager.msi
select Security Off
Wait
YOUR PHONE IS APPLICATION UNLOCKED
6. Restart the phone
press and hold CAMERA+POWER while powering
you should see spl version
NOTE THAT VERSION
PULL OUT THE BATTERY AND POWER THE PHONE
7.1 Try to flash wwe rom directy
if you have wwe use sspl 1.01 http://forum.xda-developers.com/attachment.php?attachmentid=38680&d=1178637546
WWE rom
http://rapidshare.com/files/106091341/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
now you have SPL 1.10 and CID HTC__Z12
jump to step 8
7.2 If 7.1 does not work try
7.2.1.SPL 1.09 http://rapidshare.com/files/106089565/MTeoR_-_EUR1.09SPL.rar.html
now you have SPL 1.10 and CID HTC__A07
7.2.2.you need to run the RUS update
RUS
http://rapidshare.com/files/106091396/RUU_MTeoR_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
after this you need to begin from step 1 till you see spl 1.10
jump to step 8
8.flash any rom
now to flash an rom use SSPL 77.7 http://rapidshare.com/files/106072098/SSPL.rar.html
Copy the coresponding SSPL to the ROOT of the PHONE not the SD-CARD
run SSPL on the phone and immediatly press CAMERA+POWER
YOU SHOULD SEE TRI-COLOR SCREEN displaying spl 77.7
This SPL is allowing you to flash latest radio
or to Flash any rom usin sspl 77.7
Run the update from the PC
VERY IMPORTANT
i found a way to installl hardspl
1. unplug phone from usb
2. take out the battery/put it back
3. enter bootloader (press camera+power)
4. check for spl if it sais 2.05 you can go further if not read the fisrt guide
5. enter in windows
6. extract and copy to device root http://rapidshare.com/files/138396463/breeze_HARDSPL.rar.html
7. copy to storage card root BREEIMG.NBH
8. it should say SPL-1.01
9. follow onscreen instruction for the update
10.enter in windows and delete BREEIMG.NBH from card
11.enter bootloader (press camera+power)
12.it should say spl 7.77
13.be happy now you have hardspl and you can flash any rom (without sspl)
BEST REGARDS
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using SDA security unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Please bear with me, because i really do not want to brick my phone.
Admin, please make this thread sticky. cheers
alexnvidia said:
GREATLY APPRECIATED! finally some good explainations. so let me get this straight,
SSPL = application unlock? (im asking this because i already have my phone app unlocked using XDA unlock software)
i have a dopod 595 and,
my IPL is 0.90 (do i need to update this?)
SPL is 2.05 (so i need to use the SPL>1.09)
radio is 1.06.00.10 (do i need to update this?)
RIL is 2.002
do i need to update anything before i try your WM6.1? which is the latest versions (IPL,Radio) you would recommend and can you please provide the links too. also, will the forward facing video call camera work with your ROM?
from wiki, it looks like there is the Radio:1.38.00.10 Protocol:32.71.7020.12H RIL:2.002 SPL:1.10.0000 ROM, and other older Radio ROMs but with newer SPL. so in order to update my radio, do i need to flash the entire ROM into my phone, or can i just use a Radio ONLY rom updater?
Admin, please make this thread sticky. cheers
Click to expand...
Click to collapse
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
jerpelea said:
i had 2.05 spl
i flashed the 1.09 spl from first topic
i flashed the latest wwe rom
now i have 1.10 spl
radio 1.38 from oficial rom
app unlocked
sspl
flashed wm6.1
Click to expand...
Click to collapse
im going to flash to WWE now with this version : HTC MUI BREE100 1.34.251.1 1.38.00.10 32.71.7020.12H 15673.3.3.1 3.3.1 2.002 1.10.0000 , then update to your WM6.1.
am i doing the steps right?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen close blank and nothing happens even though im still pressing the camera+power button. what should i do now?
OK, i've done all the steps you provided in post no.1 (great instructions by the way). problem, when i run SSPL on the root of the device, the screen goes blank and nothing happens even though im still pressing the camera+power button. i had to unplug the battery to restart the device. am i doing anything wrong here?
Update : Now i got it. i had to run the SPL link, not the SSPL.exe as written in the first post. must be a typo.
Update2 : Success!! flashed to WWE. now proceeding to your WM6.1!!
Update3 : Running WM6.1 B1 now! thanks jerpelea! you're the man!
Admins please make this thread sticky.
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
caglar_altan said:
I have I-Mate SPJas. I have tried several unlock tools including HTC Unlock toll, resgistry edit, SDA Unlock....
My original SPL version was 2.05 and after I ran SPL file I had IPL=SPL by des and SPL=7......
I have also applied other methods and my phones seems to be application unlock. But when I try to upload a new rom the phone goes to blank. I could never prevent this condition.
Is there a way to update Imate SPJas to Win 6.1? Which ROM works?
Click to expand...
Click to collapse
all roms work
follow the guide and will work
rom
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
caglar_altan said:
I have gone through all of the steps of ROM update.
When the rom update utility prepare for installing, after I press "ENTER" the device closes immediately and the connection with ActiveSync stops.
In three color screen I see:
IPL SSPL by des
SPL : 1.01
Enter
When I go through root directory and enter to SSPL.exe, the phone again shut down and I have to removE/install battery to start the phone.
Please help!!
Click to expand...
Click to collapse
Hi, I had the same issue. Try pressing camera & off' buttons AND Enter all together.
rom update
1- I have updated the current rom to origininal config by manufacturer's original ROM.
2- I applied HTC unlock tool..
3- My first attempt to update rom gave #262 error. Second attempt was succesful.
thanks.
futureshock said:
i don't know whats the problem with appunlocking... there are 5 Regkeys that have to be set,... it stands all in wiki
http://wiki.xda-developers.com/index.php?pagename=Breeze_Registry
Application Unlock
http://wiki.xda-developers.com/uploads/Policies.reg
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"00001017"=dword:00000090"00001005"=dword:00000028"00001001"=dword:00000001after doing this run SDAunlock app (google for it) or
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101b"=dword:00000001
Running unsigned Apps without confirmation!
add:
[HKEY_LOCAL_MACHINE\Security\Policies\Policies]"0000101a"=dword:1
Click to expand...
Click to collapse
there are 5 keys unless you have the official security configuration manager
that is setting the other keys for you
BR
HARDSPL
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
jerpelea said:
hy all
i found a way to flash hardspl to breeze
this will allow to flash any rom from any cid so that you will not break devices due to wrong cid
BR
Click to expand...
Click to collapse
That sounds interesting..!
alexnvidia said:
is there anyway to hard spl without going into windows? my device is stuck at windows 2nd boot screen (windows mobile 5 logo)
Click to expand...
Click to collapse
no
you must get to windows
what is your current cid?
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
alexnvidia said:
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
Click to expand...
Click to collapse
you can not do anithing
your ipl does not know how to load spl1.09
send the phone to repair and flash hardspl when it returns
there are many people with your problem
till now we have found not found any solution
BR
my phone is out of warranty, so sending for repair will cost me a lot. we'lll keep our fingers crossed and hope you guys can find a solution for us soon. thank you
i think, SPL version is very confusing. 2.05 is older than 1.09?
Would be good to have compatibility list between SPL and IPL versions to not mess and brick device.
I guess i was lucky, because i updated my breeze to resently posted HardSPL (thanks to jerpelea) and device still alive.
I found that RUUUpdateUt.exe i've used for DES SoftSPL is not working with HardSPL anymore. It cost me a bunch of my nerves (no body mentioned this fact!). Again luckily i found that stock RUU upgrade utility works fine with HardSPL (i just removed all dialogs except first for convenient use).
Well, at last, now i don't need to flash stock firmware (with radio ROM update which is extremely dangerous) every time when one of my cooked ROM refuses to work normally.
Needed
1.an BREEZE device[The phone must be able to enter bootloader (3color screen)]
2.TerraTermPro http://rapidshare.de/files/39206549/TeraTermPro.rar.html
3.An rom matching to your device
GUIDE
1.Disable active sync - uncheck
file->connection settings->allow usb connection
2.Put the phone in bootloader mode
power the phone pressing power and camera keys
read and note all displayed info
3.Launch TerraTermPro on the pc
un the connection window check serial and choose USB
in the new open window type
info 2
and note the information
RIGHT - HTCSQTEK_A07„§m»HTCE
WRONG - HTCSF kEØ(HTCE
close terra term
4.Figure out wich rom you need
till now i have roms for
Russian Rom
QTEK_A07
HTC__A07
http://rapidshare.com/files/109782599/RUU_BREE100_1.34.261.1_1.38.00.10_HTCRUS_SHIP.rar.html
WWE Rom (QTEK,HTC,Dopod,OCH)
QTEK_Z12
HTC__Z12
http://rapidshare.de/files/39206931/RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP.rar.html
DOPOD001 - Chinese Rom
http://www.megaupload.com/se/?d=YD49L7JD
5.
Flash the rom corresponding to your CID
6.
Boot the phone and application unlock it
7.
Run SSPL and UPGRADE to 6.1 rom and latest radio version
8.
Save the rom that saved you for latter - it colud help you again
IF YOU CANT FIND THE CID AND ROM HERE WAIT TILL SOMEBODY POSTS IT.
IN CASE OF "HTCSF kEØ(HTCE" IN TERRATERM IS VERY HARD TO REPAIR DUE TO DAMAGED BOOTLOADER
you can repair it using this guide
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
wich requires some advanced skills
OTHER ROMS - wich i dont have
i_mate_SP_JAS_1.15.301.0.exe
RUU_BREE100_1.15.71.6_1.06.00.00_OCH_Ship.exe
ruu_bree100_1.15.707.3_dopodwwe_ship.exe
ruu_bree100_1.15.709.3_dopodcht_ship.exe
Please help me to improve this list sending me CID's and ROM's
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
alexnvidia said:
this is what i get
iinfo 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
what do you mean by very hard to repair? it's impossible?
this is the ROM i flashed back to my phone (although the flashing is 100% completed successfully, it is still stuck at 2nd boot WM logo screen)
RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
i just uploaded th dopod rom in case anyone needs it
http://rapidshare.com/files/109798242/RUU_BREE100_1.15.707.3_DopodWWE_SHIP.exe
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
jerpelea said:
http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES
use this wisely
Click to expand...
Click to collapse
how do i put breeze into KITL Mode? is it the camera+power button tri-colour thing?
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
futureshock said:
reads what stands on hermes wiki page...
maybe i'm talking ****, but i think too enter kitl mode you must have a running windows mobile...
just find the kitl mode "reset" on hermes its "now for your Hermes: hold the Comm button and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL. "
Click to expand...
Click to collapse
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
alexnvidia said:
exactly.. that's the worrying part for me now. i have no idea how do i enter KITL mode in breeze. any ideas?
Click to expand...
Click to collapse
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
jerpelea said:
no
i did this on my hermes once
having the same problem as you have on breeze
hermes and breeze share the same platform
we have to find the answer
How did you manage to screw the bootloader
can you provide us a list of what you have flashed on the device?
what is the brand,model(herm 100/herm160),vendor,region of your device
i am triing to figure an solution
all others upgraded succesfully to 1.34 rus getting HTC__A07 CID and after that radio and wm 6.1
what did you do ?
BR
Click to expand...
Click to collapse
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine. then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
have you tryed a hardreset??
and did you cid is now screwed up??
alexnvidia said:
ok. i have no idea hoiw i screwed up the bootloader too. this is what happens.
i have a dopod 595 device, the breeze with forward facing video call camera, so it's a breeze 160. it's a Qtek_Z12 device and the region is WWE.
before you posted the new herm radio, i successfully updated to your beta WM6.1 using your unlocking SSPL guide. i never upgraded the SPL though. the original phone's IPL and SPL are IPL0.9 and SPL2.05.
so what i did was first to upgrade to the latest WWE 1.38 using your unlocking/SSPL guide, then upgrade to your WM6.1 beta. everything worked fine. i do notice that only the IPL has been upgraded, and the SPL remains 2.05. so i ignored it.
it was when you posted the new herm radio upgrade i then decided to update my SPL as well. so as per your instructions in the unlocking guide, i first unlock the phone (WM6.1), perform the SPL1.09 update. it was successful. phone booted up just fine.
Click to expand...
Click to collapse
here you needed the sspl to flash official rom
i think that i have this im my tread
then i run the official WWE 1.38 (the same one i used before upgrading to WM6.1 beta). and this time i did not run the DES soft SPL ( i must have forgotten and thought the phone is unlocked anyway). the RUU started, and the flashing failed at 1% giving an invalid vendor ID error message (as expected because my phone is not superCID and i forgot to run DES SSPL). after this little incident, i canot boot my phone anymore.
Click to expand...
Click to collapse
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
so i tried to recover it using various methods. and i successfully flashed back the original WM5 WWE dopod 595 ROM by using the latest RUU from 1.38 with old WWE WM5 nbh. the flashing completed 100%, the phone reboots, and still stuck at the second boot screen. IPL has been downgraded to 0.9 and SPL remains 1.09.
what should i do now? i really appreciate you/anyone taking the time to look into this issue. thank you.
Click to expand...
Click to collapse
did you try to hard reset?
the two "-" keys and power
???
futureshock said:
have you tryed a hardreset??
and did you cid is now screwed up??
Click to expand...
Click to collapse
yes. i tried hard reset (two soft keys+power then press 0) many times. doesnt work. tried the mtty to format the phone, doesnt work.
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
alexnvidia said:
here you screwed the botloader
now you have an older ipl that does not know how to load the new SPL
ok, firstly, when i loaded up the SPL1.09, the phone boots up fine. it only got stuck when the flashing to WWE1.38 failed. at this point i still have the new IPL.
the old IPL was flashed in during the recovery attempt when i tried to flash the old official WM5 ROM back hoping it would also downgrade the SPL, but it didnt. it only downgrade the IPL to 0.9. SPL remains 1.09
Click to expand...
Click to collapse
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
jerpelea said:
im my guide i wrote to use sspl
if you use sspl you finish the 1.34 upgrade from spl 1.09 and is everything fine
if not no
from here you had spl A07 so you could flash ONLY original htc Rus rom
you flashed an older ipl instead
an older ipl that does not load correctly the new spl
the spl can not be downgraded from 1.10(1.09) to 2.05
here is the problem
and as long as you dont have an rom with your CID od HARDSPL the phone can only be flashed using my hermes guide if we find the buton combination on breeze
BR
Click to expand...
Click to collapse
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
any solutions so far? guys?
alexnvidia said:
so what you mean now is my IPL 0.9 is WWE and my SPL is 1.09 Qtek A07? and this is causing the problem? so can i flash the IPL on the phone to the lastest one in tri-colour mode so that it can read the 1.09 SPL? can u please provide me with the SPL upgrade file and utility?
Click to expand...
Click to collapse
no
your problem is that ipl 0.9 cant load spl 1.09
the memory load address differs and it cant load it correctly
i havent found an solution
you need an valid spl loaded to flash
you can try all the original roms (don't edit them)
and see if any one of them tries to push ipl and spl before actualy flashing
also try the official 1.09 spl flash
BR
nowaday, I found this thread useful. thanks
what happened? I was upgrading to futureshock ver. 4 and during phone'd swiched off ... I was looking for original ROM posted here in Breeze forum, but I didn't find it ... after read this 1st post I recoginze, that Czech ROM official is RUS .. that news for me (of course good ).
KITL Hermes
I had ROM 6.1 from Futureshock...still problem with radio (my phone couldn´t accessble but signal icon shows good signal, radio version 1.38.0000), so I decided flash some original ROM. Aftet that my booting stuck on HTC logo or Windows Mobile logo. So I can´t use normal way to flashing. Only from SD card or first turn on phone to boot loader mode and than attach usb cable and start flashing. From SD card (where is renamed ROM BREEIMG.NBH) after enter into bootloader mode start loading and than just turn to trhreecolour menu where is BREE100 - IPL-0.90 and BREE100-1.10.0000 and doesn´t want continue. If I flash ROM via USB cable (first go to threecolour mode, than attach cable) than run ROMUpdateUtility.exe and flash process is being started but always die on 2%, than autoreboot and again stuck on HTC logo.
I tried hard reset, I tried lot of ROM versions HTCRUS, HTCEUR, QTEKEUR, FUTURESHOCK but still same problem during flash ROM stop on 2%...
I tried KITL Hermes unbrick method but same problems like had others on this forum, I don´t know how to turn my MTeoR to KITL debug mode because device is different like Hermes so key combination doesn´t matches with Breeze. MTTY - info 2 command show me CID: waiting interpreter failed...
Any ideas how to back life to my MTeoR?
Can I use application like MTTY? Could me help this program?
Thanks for any help...
DOPOD601
which RUS update rom can i use?thanks
HTCSDOPOD601in眘HTCE
which rom?
can somebody email to : [email protected] or [email protected] ?
thank you