Broadcom Bluetooth 1.6.0600 cab available here! - MDA III, XDA III, PDA2k, 9090 Software Upgrading

The new version of Bluetooth 1.6.0600 is now available at
ftp://xda:[email protected]/BlueAngel/OEM_WWE_160_600.sa.CAB
I have installed it but I haven't tried it yet. I had no problem installing the cab manually or directly from the Extended ROM.
Does any one knows which are the corrected bugs in this version and what's new? Why this new version number (from 1.0.3500 up to 1.6.0600)? It looks like a major release to me. I hope it DOES solves the problems we have with Bluetooth and our Blue Angels.
Enjoy it!
ArtZ

thanks for this really a nice update

I can't install it! :x
It says that a dll is in rom and connot be overwrited ...
(how do you install using extended rom??)
Thanks

I guess Bluetooth has to be be turned "OFF" when you install the update.
I had no problem to install it. I will play with this update tonight at home
ArtZ

I tried with it off, even put it in the startup dir but it says the same error ...

Yeah!
Occur the same thing with me!
Can anyone say the reason for this?
It will be because of the ROM installed on int?
My device configuration is:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.00
Protocol Version: 1337.38
ExtRom: 1.22.126 WWE
Thanks.

If it can help, here's my device info:
Rom Version: 1.22.00 WWE
Rom Date: 10/22/04
Radio Version: 1.06.02
Protocol Version: 1337.38
ExtRom: 1.22.557 WWE
Thanks!

Hi,
i have the same problem.
the dll is in use or in rom
Thanks.

I have installed the cab in two ways as follows:
First way: I copied in my SD Card the OEM_WWE.160.600.ca.CAB and I launched from there with the Bluetooth turned "OFF" and all other communication ports closes ( No active USB for ActiveSync and/or Wi-Fi) and I had no problem to install it.
Second way: I have unlocked the Extended ROM and put the CAB there deleting the previous BT patches from the Belgium Extended ROM ver.557 (OEM_124_008.ca.CAB, OEM_Patche_12100401.sa.CAB, then, I deleted the two lines to install these patches in the Config.txt file to replace them the new CAB) and I had also no problems to install.
Hope that helps.
Regards,
ArtZ

Hmm..
Well. I got the same problem..
The file "\Windows\ace_ddi.dll" is in use or is in ROM.
What to do?

I had more of a problem even out of the cradle so I:
Renamed the files in the \windows
(My Resco Explorer complained that it was unable to delete but it renamed them any way
ace_ddi.dll
ahioem.dll
AudioGW.dll
BtCeIf.dll
BtCeProfiles.dll
BtCeStack.dll
BTChooserLib.dll
BtPhoneIf.dll
btrez.dll
BTTrayCE.exe
FrontLight.dll
Keybddr.dll
Serial_BTUR.dll
Serial_Cmd.dll
Wavedev.dll
wbtapiCE.dll
Then I installed the Cab from \Storage\temp
Bluetooth Reports 1.6.0 Build 0600
I have not tested if it works

Has anyone tried this on an XDA II with 2003SE?
I'm tempted to install it if it works.

It Worked!! Had to renew a few more file but it is running now.
Thanks MDAIIIUser!

I have a Verizon XV6600 and tried this. For whatever reason it instantly makes the phone stop working. Also the Bluetooth starts but also instantly turns off with the following message: "The Bluetooth Radio failed to turn ON due to insufficent driver memory available. You must perform a normal reset before you can trun ON the Bluetooth Radio."

Before I install (and risk another Hard Reset and new System Setup) the key questions:
1) Does ist improve BT-headset voice quality or stability?
2) Does it include or work with the High Quality Audio Profile for the HP BT-Headphones?
3) What are the recognizable improvements over the 1.0.0.3500 stack?
Any answers available?[/list]

Before checking the forum again i made the same procedure described by MDAIII user .
I have tested with my HB60 headset and its working fine so far..

RE
Its NOT working on O2 XDA II with WM2003SE.
The whole thing hangs
:evil:

How do I make the dlls visible in order to rename them?
I would like to install this on an XDA II but I cannot see the dll files in the Windows directory.
How do I make them visible in file explorer so that I can rename them?

RE
Just go to File Explorer --> Windows and tap the screen and hold it there. A box will pop up and you'll be able to see 'View All Files'

Broadcom Bluetooth 1.6.0600 cab available here
Hi all
I did this update 3 times, the install went ok, but me BT signal
is not very good, it swings up and down..
Did this only happen for me ??

Related

Pre-production problems

Hi!
I've got a pre-production version of the Qtek 9090.
The ROM version was 0.9x something and I had some troubles with it so I figured I would just update it... Shouldn't have done that
Anyway, I got hold of a strange update file, called "HA_RUU_12100_112_00125.exe" and ran it on my PC. Not that bright, one might think :?
The device would not fully boot up. I then took out the battery and waited a coupple of minutes. After that it booted up nicely. However, the device is not fully functional and when I look in the "Device Information" it says:
ROM version: 1.21.00 WWE
ROM date: 07/28/04
Radio version: DM FAIL
Protocol version: DM FAIL
PRL version: N/A
ExtROM version: 1.21.112 WWE
I've tried upgrading it using all the tools and instructions that I could find on this great forum but with no luck..
The DeviceData app brings back a strange txt-file that looks a bit like this:
PH20A1 A 1 WWE E [and some strange characters] 1.21.00 0 0 1.21.112 DM FAIL
I would be VERY grateful if someone could help me back to a fully functional device!!
Bump!
!!!Help!!!
so, why don't you just try using a non-strange file to upgrade your device then?
Help!
I am, you know! :lol:
I've tried upgrading it using all the tools and instructions that I could find on this great forum but with no luck..
Click to expand...
Click to collapse
maybe upgrading the radio stack using the SD method would solve your issue, however, you'll need an SD backup of a working Radio rom for this.
there is a 1.06.01_sd_img.rar (german i think)
and a NTRW_ImageQtec9090.rar (no idea which language)
on the ftp
THANK YOU!!!
I'll give a try right away!
What does the "NTRW"-file do?
Can I upgrade the radio stack without any 120-errors?
A quick question:
Do a use Winhex or some other tool to copy the data to the SD card?
To be more specific:
What tools do you use to copy the .nb1 file to the SD card?
Help!
xdatools is used to program sd cards with rom image.
I've tried the version of XDATools that I found on Jeff Summers page. It says "Invalid file size" and that the image should be a certain size. The Radiostack is not that size..
Anyone?!
Getting Image on XDA III / PDA2k from SD
Just use "ntrw.exe" - search forum for location. That runs in DOS and will copy the .nb1 image you can get from the ftp to an SD card in one command. Insert card/enter bootloader and it worked for me (but not the radio as it hung there - i also have a pre production model)
chris
I've got the 2.03 version of the Bootloader and it will not detect the card...
Do you know how I can upgrade it?
Strange - I had 2.03 too - but after I applied the 1.06....sd_img file from ftp it uploaded to 2.05 - so i was in the same position as you and got it working.
I am not 100% sure it was that file i tried first - it might have been
ntrw_imageQtec9090.rar also in the ftp archives.
Either way I do find some images dont work - so i also found and used psdwrite.exe and that seemed to work when writing images using ntrw.exe did not. I am sure there is something else wrong- but find that between these 2 I can create bootable Sd images that at least get the device up and running.
I am still struggling to upgrade the radio stack - as with the 0.9x version none of the "mainstream" upgrades work - they all fail complaining about the radio stack version.
Good luck - i think you must be close!
Thank you Hampers!
Progress! I got the Bootloader to accept the Qtec.nb1. It takes about 40seconds before it reacts and after that it says:
"
SD Download
=========
Selection=1
Not allow
update!
"
Quite strange, don't you think?!
Just make a copy of your 9090's ROM with romupdate.exe and ntrw and copy the firtst 416 bytes from that to the image file you are trying to flash by overwriting them. Then it will allow the update
Just make a copy of your 9090's ROM with romupdate.exe
Click to expand...
Click to collapse
I would like to but when I give the command "d2s", it runs a checksum test, starts to copy and finally fails with the message "Add record is error!" (Even I speak better English than that )
The SD card now contains a bit of information from my Qtek. When I try to re-flash it with this information it returns the same message as usual; "Sections=1 Not allow update!"

Official i-mate ROM release (1.40.176 & 1.12.00)

It's too good to believe:
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
I'm downloading now.
Tom
39.6MB (their server is really slow today)
From i-mate site:
The details of the new ROM image are:
For the Worldwide English Build:
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Radio version: 1.12.00
Protocol version 1337.42
ExtROM version: 1.40.176 WWE
I think they waited until the pros on this site figured everything out first...then they just piggy-backed on their findings. Kudos to the real pros on XDA-devel!!!
tom
How to install this rom in Spanish Qtek 9090, i'm new and y don't now very well to change the language.
Thank you!
imate update
I just got the update from the I-mate site and am working it with the XDA tools but I'm getting a checksum errors on the radio, NK, and MS filles. Should I be using a different tool? My device is a MDA III T-mobile german flashed to english. Any Ideas???
Downloaded, installed and running. No problems....yet. I can't find a config file in the extrom in order to make some changes, but there's a setup.exe file now. Not sure what that's about.
No idea how to change the language...I'm not good enough to know that.
More later.
Tom
So far so good. A couple issues. 1) the phone off (or flight mode on) is no longer activated by the Call End button. Shame...I loved that feature. 2) I have a problem turning the phone on (flight mode off) after a soft reset. I think it may be caused by the Contacts Button addin. The only way I can turn on the phone is to go into the keypad and then turn it on. All other methods cause the system to lockup.
Tom
Temporary copy...
Until someone puts it up on xda-developers / cooks it,
a MUCH faster loading copy is at
http://www.myehud.com/BlueAngel/PDA2k_WWE_14000_176_11200.exe
Ehud
Great!!!!!
I'm downloading it right now!!
i-mate finally released it after 1000's of unkept promises!
FINALLY!!! Here's to hoping it will be better than the Qtek version!
Again, I would like to ask why there is no config file??? I take it setup.exe has the config file built in? If any of the pros can give me some feedback as to this, I would appreciate it. I'd like to drop in several cab files incase I fubar something down the road.
Thanks,
Tom
P.S. almost 6 hours and only the "turning on the phone" problem.
yes... config is missing...
will try out some combinations .
skype is taking 3.8 megs... i don't need it there.
sunish said:
skype is taking 3.8 megs... i don't need it there.
Click to expand...
Click to collapse
Ture...true. Skype was fun the first couple times, but with VOIP at home, I really don't need it anymore. Still, kind of cool to show people...if you have someone that you can connect to.
Tom
Tried some combos, including, using the old config and setup files... nothing wrorks,
only thing is that any additional file found in ext rom is treated as a carrier customization file, and on selecting one file , that particular file will be installed..
also, i noticed that there is one config file in the windows directory.
Just take the Autorun.exe and config.txt from another rom, add in the cabs from the i-mate rom, and there you go.
Yeah, I will be removing Skype ASAP myself. I can understand how it could be useful, but for my purposes, it just takes up space.
The Setup.exe is way better then the config
Leave the setup the exe it is better then the config. with the config you have to site the and write a line for each cab file. the setup.exe automatically runs every cab file in the ext rom. whether you put it there or not. So when cookinh your extended rom no need to keep having to change the config.txt. The setup will run whatevers there.
You can find this new ROM at ftp upload folder hope MDAIIIUser can move to wiki , I will upload ext.ROM by tomorrow
TheLastOne said:
Just take the Autorun.exe and config.txt from another rom, add in the cabs from the i-mate rom, and there you go.
Click to expand...
Click to collapse
Tried that , removed setup.exe , copy old autorun.exe and made new config file,
but didn't worked out..
Re: The Setup.exe is way better then the config
MarcValme said:
Leave the setup the exe it is better then the config. with the config you have to site the and write a line for each cab file. the setup.exe automatically runs every cab file in the ext rom. whether you put it there or not. So when cookinh your extended rom no need to keep having to change the config.txt. The setup will run whatevers there.
Click to expand...
Click to collapse
Do I need to keep autorun.exe ? If yes, then which one old or new?
sunish, I can not imagine why it would not work. You must have made a mistake somewhere.
The WMP10 close problem still exists, which leads me to conclude that it is indeed a problem with the 1.40 CE Rom, and not something within the Extended rom muddling it up.
Has anyone seem any actual improvements with this rom over Qtek's? All of the same problems still to be in place. The extended rom has a few different (but unimportant) cabs, but that's about it.
MarcValme, I'm not so sure I agree. One of the good things about the config.txt file is that you can specify the order in which the cabs install, which does actually make a difference in a few circumstances. Food for thought.
TheLastOne,
Don't know / Can't figure out where is the problem.
No combination is working for me.
Maybe will try it again after a day or so.
Right now, after unhiding the Ext ROM, I'm installing all the programs needed by me manually.
One thing that I noticed is the increase in speed... The performance is somewhat better now...

Cingular SX66 Upgrade - a complete "How-to"

Cingular SX66 Upgrade - a complete "How-to"
I am not associated with XDA-Developers, but these guys do a lot of good work. If this post helps you, please support their efforts by making a small contribution to XDA-Developers forum – I did. This is a long post and I wouldn't blame moderators for shortenning it. If this is the case, the entire procedure is available on my website:
http://www.souljernation.com/files/SX66Upgrade.doc
Well, I was one of the lucky winners of a Siemens SX66 "AT&T" variant, sold by Cingular, which can not be upgraded using the Siemens SX66Update.exe program. Each time I try, I would get a COUNTRY ID ERROR.
SO, after loads of research, I finally put all of the pieces together to get the thing upgraded to Version 1.33.10 with Radio Stack Version 1.12.00 and Bluetooth stack 1.0.0.3900
This configuration is working pretty well for me and has solved a bunch of the little annoyances of the 1.32 version of the ROM and 1.02 Radio ROM.
Here is the procedure for upgrading – get used to going through the initialization process – you’ll have to do it several times. I am not sure if a full backup is a good idea since it will overwrite the BT stack after you upgrade it. But it is definitely a good idea after you are finished upgrading and getting the PDA restored to the way you use it.
You will need the following files which can easily be found using Google:
Siemens’ upgrade package: SX66update.exe
Hacked Upgrade utility: MaUpgradeUt_noID.exe
Blue Angel Flash Tools: BAFlashTools.zip
Radio ROM version 1.12.00: R1.12.00.zip
Restart Radio utility: restartradio.exe
Broadcom Bluetooth stack cabinet: BroadcomCorp_BT1.0.0.3900.cab
Now, you do not want to search all over the internet for these, so here is a nice clean package that contains everything all ready to go…. LMSX66Upgrade.zip
http://www.souljernation.com/files/LMSX66upgrade.zip
You can extract this file to its own directory or build the file set by downloading the files individually.
Here is how to build the file set:
1) Extract the Siemens SX66Update file.exe to a new directory called SX66Upgade (using winzip or winrar). Add the file MaUpgradeUt_noID.exe to this directory.
2) Extract the BAFlashTools.zip file to another new directory called BAFlashTools.
3) Extract the R1.12.00.zip to the BAFlashTools directory.
4) Don’t worry about the BT stack and resetradio for now – just keep track of them.
If you downloaded my fileset you can skip all of that stuff and just extract it to a temp directory somewhere on your PC.
Before proceeding, make sure that you have a good connection and partnership from PC to SX66, that the main battery is fully charged and that you have the power supply plugged in to the cradle. These are all very important steps!!
Remove the device from the cradle.
Start the upgrade –
Manually trigger a bootload by holding the record button and the power button and pushing the reset. Your device will say SERIAL, but the back light will not be on, so it will be difficult to see.
Plug the device into the cradle and the display should change to USB.
Go into the SX66Update folder on your PC and run the MaUpgradeUt_noID.exe and follow instructions – don’t worry that it does not display the current software versions.
In about 1 minute or less, you should see a bar graph displaying progress. If the program is inactive for longer than a minute or two, restart the PC and try again.
Once the ROMS are updated, the system will reboot, go through the initialization process, but don’t waste any time because the system will get wiped again after the radio upgrade.
Wait for the device to go though the program installation and become usable and partner it with the PC again. (I know, this is tedious – but, hey, we’re geeks, right?)
Next, open the BAFlashTools directory and run BaUpgradeUt.exe. This will take you through the same process, but only flash the radio ROM with the 1.12 stack.
Once complete, the system will go through another complete initialization. Suffer through it, plug it in to the cradle, and partner it with your PC yet another time.
Using the Explorer option of ActiveSync, create a temporary folder on the SX66 and copy restartradio.exe and BroadcomCorp_BT1.0.0.3900.cab to this new folder.
Using the PDA, go into the temp folder and run restartradio.exe by taping it once. This will shut down the BT stack. Look for the telltale “X” by the antenna ICON in the menu bar.
Next, tap the BroadcomCorp_BT1.0.0.3900.cab file and it will self-install the new BT stack. This file will delete itself once installed.
FINALLY, do a soft reset by pushing the reset button and you are done.
NOTE: the Bluetooth stack is integrated into the system ROM. If you do a hard reset or the battery dies and the system memory is lost, the BT stack will revert to the old version.
Good Luck!!
Perhaps this should find its place in the wiki?
This is made obsolete by the new series of 1.40 roms. Soon enough, Cingular will have their version too.
Instructions to update to 1.33.10 are already on wiki, as they are the same instructions as all the other ones. So are instructions to upgrade your bluetooth to 1.0.0.3900 (also made obsolete by the 1.40 series).
Not to mention that there is a 1.13 radio rom, which is superior to the 1.12 rom, seemingly.
I actually noticed all of that, yet I found very few posts to actually recommend those versions and fewer still that actually detail how to find all of the right files and upgrade the SX66 specifically. This is especially true of the SX66 AT&T variant which can not be upgraded with the Siemens' upgrade package. It took me a very long time to find all of this information and get it to work right based on scattered postings - I'm just trying to save brother SX66 owners a little time and frustration and would argue that this post is actually valid until obsoleted by an official Cingular update package (which undoubtedly will not work on the AT&T variant.....)
I'll give you that. I was just refuting ejdmoo's post more than anything.
I assume that you are refering to the wiki upgrade information here
http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
here
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
and here
http://wiki.xda-developers.com/index.php?pagename=BA_GettingStarted
I have a seimens sx-66 and none of these methods worked. They all either gave me the country id error or they froze and left me with no radio.
What i ended up having to do was download the official ssiemens version for the PH20B1 near the bottom of this page.
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
and then add [CHECKCEID_TYPE]=1 to the ruu.conf as described in this page . And was FINALLY able to even upgrade to the official siemens rom that i'm supposed to have no problem with.
this is what i started out with
PH20B1 : B 1
WWE : E
XGULA001
1.20.10 : 1 0
1.20.115
1.02.10 : 02.10
Sorry The SX-66 is not very well supported on this site and all the begging that I have done for somebody to open a wiki section for it has not worked.
Here are the facts (in my eyes)
Best Search to use on this site
Author = cdaly1970
Sort = Posts
Best Person to PM on this site
cdaly1970
Best SX66 info you can get here (what ...and the author is cdaly1970)
http://home.comcast.net/~sx66-blueangel/
Best Site
http://www.pdaphonehome.com/forums/forumdisplay.php?f=167
Best Person to PM on that site
cdaly1970
So that 4 Woskars for Charlie !!!

Help LOST CRITICAL FILES>>>>

OK, I have a Verizon Wireless XV6600.... I accedentaly deleated some files in the windows folder, and now my "Album" will not open, and I cant play any videos.... I am not sure how to back up all my data, settings and programs. I would like to do so before upgrading firmware or re installing the Windows Mobile.
Where should I start, Without loosing everything?
HELP???
ROM version: 1.35.00 WWE
ROM Date: 12/10/04
Radio Version: HA01_140
Protocal version: AA3.3.301
ExtROM version: 1.35.113 WWE
ALSO, I use a MAC with Missing Sync. :?:
In your case I recommend upgrading to the latest ROM.
most of the programs can be later re-installed using Activesync.
If you keep all item in PC's Outlook, you'll be able to sychronize them with 'fresh' device.
It's hard/impossible to preserve ALL programs and settings.
Hard resseting / flashing the device always require some configuration work after...
Good luck.
OK, It seems to be the "Album" program is missing:
I did some cleaning and, when I try to run ALBUM, I am now getting the error:
Album.exe- (Cannot find 'Album' (or one of its components). Make sure the path and filename are correct and all the required libraries are available.)
How do I download this program and where?
I need the slideshow with Vids and PICs.... I love this little usfull program!
HELP
I am using the Verizon XV 6600 with camera....
upgrade
just upgrade your device to new ROM

NEW Custom 2.26 ROM with CF2-SP1 Flash7 Java Rings Themes...

Hi all,
to those of you who need an Operator-independent (AKA 'Clean'), stable, fast and space-saver ROM, i'm glad to offer my fully customized AKU 2.3, WWE 2.26 ROM.
It comes pre-loaded with the latest Compact Framework 2.0 SP1, Macromedia Flash 7.0, Intent MIDlet Manager, xnView Pocket, Total Commander 2, performance tweaks, freeware utilities, a new improved pocket IE start page and lots of ringtones, themes and Camera templates!!!
The programs and files I listed are integrated in the ROM so they don't waste any bit of your precious storage space.
EDIT: due to the problems with RUU (Rom Upgrade Utility) that many users have reported, i've re-uploaded the rom with two different RUUs, one for G3 users and the other for G4.
DOWNLOAD LINKS
G4 OWNERS (RUU 2.5.2):
LINK: ftp://xda:[email protected]/Uploads/Wizard/Roms/RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G4.exe
G3 OWNERS (RUU 2.0.1): [NOTE: You MUST have both IPL and SPL version 2.xx]
LINK: ftp://xda:[email protected]/Uploads/Wizard/Roms/RUU_RIsidoro_2.26.10.2_WWE+CF2SP1_G3.exe
How to tell which model you have:
- soft reset the phone and look at the IPL and SPL version numbers
- if the numbers end with .0001 (e.g. 2.18.0001) you have a G4
- if you have not the tailing .0001 (e.g. 2.18) then you have G3
THE ROM IN DETAILS
ROM Version: 2.26.10.2 WWE
Radio Version: 02.25.11
AKU: 2.3
IPL & SPL: NOT INCLUDED (for G4 owners)
Software pre-installed (and integrated):
.NET Compact Framework 2.0 SP1 - required to run .NET 2 applications
Macromedia Flash 7.0 - IE plug-in to play Flash animations
Intent MIDLet Manager 10.1.7.551 (Session fix included) - to run java applications
xnView Pocket 1.35 - best free image viewer (with slideshow)
Total Commander 2.0 - best free file browser, FTP client and Registry editor
Magic Button 2.0 - great free task manager [*]
vxIPConfig 0.9.7 - IP details and renew
vxUtils 1.6.4 - Ping, Traceroute, Whois, Lookup, Wake On Lan and much more
NbtstatCE 0.05 - NetBios scanner and remote shares browser
OmapClock 0.2 - CPU overclocker [*]
SmartsKey 0.52 - the best utility ever made!!! [**]
PHM TrayLaunch - application launcher (from tray) [*]
Control Panel Applets:
New Menu for WM5 2.01 - application launcher (from menu) [*]
File Dialog Changer 1.65 - to open/save files from/to anywhere [*]
Soft Key Applet Ex - to edit the default soft keys [*]
Bells and Whistles:
New pocket IE start page - Google search field (web and images), Gmail, Skweezer and PocketPCFreewares
10 new Camera templates - to take funny photos
29 new ringtones - NokiaSick is the best IMHO
2 ETEN phone dialer skins - portrait blue and black with SmartDial support! [***]
The ExtROM in details:
Cert_Disable.cab - remove the security check when installing a program
CF2reg.CAB - registry entries for CF2 SP1
Disable_security.CAB - disable every phone security check
Enable_NTIZ_.cab - enable Timezone tab in Settings->Phone
MIDLet_manager.cab - registry entries for Intent MIDLet Manager
MP-Shorcut-MMS1-Voice-CV-TMUS-060404.CAB - shortcuts for Voice and PDF viewer, MMS account creation
MP_CVSDcpl_20060220.cab - voice applet in Control Panel
MP_SmartDialing_enable_0915_signed.CAB - Enables Smartdial
PP_ExtVersion.CAB - Sets extrom version number
regsvrce.exe - needed to register Macromedia Flash 7 DLL
VJBrisk.exe - needed to register Macromedia Flash 7 DLL (Thanks Vijay)
VJTarget.lnk - needed to register Macromedia Flash 7 DLL (Thanks Vijay)
SmartDial+EtenBlackPortretENG_0.1.cab - ETEN black skin with Smartdial [****]
SmartDial+EtenDBluePortretENG_0.1.cab - ETEN blue skin with Smartdial [***]
TMOUS_Camera_Profile_reg_0414_signed.CAB - photo camera settings
Risidoro_Tweaks.CAB - tweaks
Tweaks:
IE zoom set to Normal
HKCU,"Software\Microsoft\Internet Explorer\Main","ZoomSetting",0x00010001,2
Keyboard status (CAPS LOCK, Blue/Red key modifier)
HKCU,"ControlPanel\Keybd","EnableIndicator",0x00010001,1
SIM contacts are not listed in Contacts
HKCU,"ControlPanel\Phone","ShowSim",0x00010001,0
Cache, cookies and History relocated to SD card
HKCU,"Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders","Cache",0x00000000,"\Storage Card\Program Files\IEM\Cache"
HKCU,"Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders","Cookies",0x00000000,"\Storage Card\Program Files\IEM\Cookies"
HKCU,"Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders","History",0x00000000,"\Storage Card\Program Files\IEM\History"
Disconnect button in GPRS notifier
HKLM,"ControlPanel\Phone","Flags2",0x00010001,16
Wireless plugin in Today
HKLM,"Software\Microsoft\Today\Items\Wireless","DLL",0x00000000,"netui.dll"
HKLM,"Software\Microsoft\Today\Items\Wireless","Enabled",0x00010001,1
HKLM,"Software\Microsoft\Today\Items\Wireless","Flags",0x00010001,0
HKLM,"Software\Microsoft\Today\Items\Wireless","Options",0x00010001,0
HKLM,"Software\Microsoft\Today\Items\Wireless","Order",0x00010001,0
HKLM,"Software\Microsoft\Today\Items\Wireless","Type",0x00010001,4
Bluetooth transfers enabled
HKLM,"Software\Microsoft\Obex","IsEnabled",0x00010001,1
Timezone tab in Settings->Phone (duplicated)
HKLM,"Software\OEM\PhoneSetting","ShowTimeZonesPage",0x00010001,1
Menu animations disabled
HKLM,"System\GWE\Menu","AniType",0x00010001,0
Glyphcache - improves speed
HKLM,"System\GDI\GLYPHCACHE","limit",0x00010001,16384
Cleartype in landscape mode
HKLM,"System\GDI\ClearTypeSettings","OffOnRotation",0x00010001,0
Differ icons for GPRS and EDGE
HKLM,"Drivers\BuiltIn\RIL","EnableDifferGprsEdgeIcon",0x00010001,1
Workaround to avoid GPRS connections conflict with phone calls
HKLM,"Drivers\BuiltIn\RIL","GPRSStallWorkaround",0x00010001,0
Enable DTMF
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x00010001,1
Enable WiFi 802.11g (54 Mbps)
HKLM,"Comm\TNETWLN1\Parms","dot11SupportedRateMask",0x00010001,1
HKLM,"Comm\TNETWLN1\Parms","dot11SupportedRateMaskG",0x00010001,8
NOTES:
[*]: the program is in ROM but you need to manually enable/start it if you want it.
[**]: SmartsKey is in \Program Files\SmartsKey+OmapClock you need to start it from here. Smartskey's INI files has been preconfigured to overclock the wizard to 228MHz. Create a new smartskey.ini if you want to make changes and overwrite the one in rom.
[***]: ETEN blue dialer skin is automatically installed during the extrom installation. It is NOT in rom so it wastes a bit of space in \windows but you can uninstall it if you don't like it.
[****]: ETEN black dialer skin is in \extended_rom. Use Total Commander to open the folder and doubleclick to install it.
Wow...2.26 roms are poping up everywhere! Now the time comes to choose one. As far as your goes does it come with the ability to remove the programs you listed? As well as the ringtones and themes? I hate having all of that stuff on my phone and not using it!
thankins said:
Wow...2.26 roms are poping up everywhere! Now the time comes to choose one. As far as your goes does it come with the ability to remove the programs you listed? As well as the ringtones and themes? I hate having all of that stuff on my phone and not using it!
Click to expand...
Click to collapse
You cannot remove them BUT they're in ROM so they don't waste any space on your main storage. Moreover, the slipstreamed CF2 SP1 and Flash7 let you save about 6.5Mb of storage (or 2.5Mb if you install CF2 in SD card).
Anyway, choose the rom that best suits you.
Bye bye
Thanks for the quick reply...have you noticed any bugs/problems with your ROM?
thankins said:
Thanks for the quick reply...have you noticed any bugs/problems with your ROM?
Click to expand...
Click to collapse
No (fingers crossed).
Basically, it is the T-mobile US 2.26 ROM so it behaves just like any other t-mobile 2.26 ROM. I only added some files (i didn't touch any of the original files).
Try it if you want but remember: if you have a G3 phone then you must have both IPL and SPL version 2.xx to install this rom.
Bye
Sounds righteous dude! I'm looking forward to seeing the performance.
Thanks!
Hi guys.
Great work with all the custom roms. I have a problem with these english roms that i hope you guys can help me fix. I posted this in its own thread but i dont know if you guys read that som hopefully you will give me a litle of your valued time and see if you can help me out
I have been messing around with differnt rom versions on my Danish qtek 9100. There has been no new updates out in Danish for a long time and the phone is quite buggy. Anyways, i have tried multiple roms and they all seem to work well but my problem is that i need my danish keyboard to funktion with Æ Ø Å which are one my phone keyboard.
when I install the cab Default_Prodigy_Nordic_keyboard_1102.sa
from
ftp://xda-developers.com/Wizard/Extended_Roms/ExtRom_1030712_121_10410_Qtek_NOR_Ship.rar
The Æ Ø Å buttons on the keyboard works but The 4 point navigation "joystick" with the button in the middle stops working.
What can i do?
Also, how do i go about getting a danish T9
Thanks
Jacob
I'm interested in this ROM however I need a refresher regarding loading extended roms such as (ftp://ftp.xda-developers.com/Wizard/Extended_Roms/cingular-ExtROM.zip) I've been spoiled with Roms that have always inculded the Cingular settings (thanks to Summiter).
Looks like this might be a better cingular setting file to run - http://forum.xda-developers.com/viewtopic.php?t=61619
Is it as easy as copying to the SD card and executing?
Wow, your ROM sounds great. I just flashed the Xelencin ROM, but I may redo it with yours. However, I have a question regarding the Radio version.
I just received a warrantee replacement phone from T-Mobile USA today. When I booted it up, it showed the following:
IPL 2.26
SPL 2.26
GSM 02.26.11
OS 2.26.10.2
I then flashed the Xelencin 2.26 ROM with this filename:
T-Mobile_RUU_Wizard_2261020_226_22511_ENG_US.exe
Upon rebooting, the following was shown:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
Your notes indicate that your ROM includes Radio version 2.25.11. Do you know what the difference is between 02.25.11 and 02.26.11?
I don't think I can get the 02.26.11 back now that I've flashed it. I didn't make a backup of the shipped ROM first.
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Error 208
The rom looks very promessing, but something goes wrong... I receive an error 208. Anybody any idea what means?
Who can help the newby?
Thanks in advance!
I am very excited to try this, and read above about the Cingular extended rom as well, So i would install this and then run the Cingular Extended ROM to copy over some of the Cingular Settings that I may be missing?
Also what is diifference in this compared to the BETA 2.26 ROM that is out there!?
yowzator said:
Wow, your ROM sounds great. I just flashed the Xelencin ROM, but I may redo it with yours. However, I have a question regarding the Radio version.
I just received a warrantee replacement phone from T-Mobile USA today. When I booted it up, it showed the following:
IPL 2.26
SPL 2.26
GSM 02.26.11
OS 2.26.10.2
I then flashed the Xelencin 2.26 ROM with this filename:
T-Mobile_RUU_Wizard_2261020_226_22511_ENG_US.exe
Upon rebooting, the following was shown:
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
Your notes indicate that your ROM includes Radio version 2.25.11. Do you know what the difference is between 02.25.11 and 02.26.11?
I don't think I can get the 02.26.11 back now that I've flashed it. I didn't make a backup of the shipped ROM first.
Click to expand...
Click to collapse
I've never heard of a 2.26.11 radio stack. Maybe it was taken from some t-mobile beta rom.
However we'll never know how it performed since you overwrote it
Bye
gomylle said:
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Click to expand...
Click to collapse
The rom upgrade process didn't work. The rom was not installed. Try flashing the rom again.
To avoid problems you can try to extract the content of the rom executable in a folder (use winrar: right click on the exe and choose 'extract here') and run newromupdateutility_wizard_noid.exe from there
Re: Error 208
ghostb said:
The rom looks very promessing, but something goes wrong... I receive an error 208. Anybody any idea what means?
Who can help the newby?
Thanks in advance!
Click to expand...
Click to collapse
Sometimes the self-extracting archive doesn't work well. The problem is NOT related to the rom; it's just the self-extracting exe archive.
To avoid the problem you must extract the content of the rom exe in a folder (use winrar: right click on the exe and choose 'extract here') and run newromupdateutility_wizard_noid.exe from there.
Bye,
let me know how it goes...
gomylle said:
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Click to expand...
Click to collapse
thats the rom i posted, i didnt include any extra ringers or theme's yet, risidoro's rom is different
shogunmark said:
gomylle said:
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Click to expand...
Click to collapse
thats the rom i posted, i didnt include any extra ringers or theme's yet, risidoro's rom is different
Click to expand...
Click to collapse
Should you be at work...and if you are there shouldn't you be working
thankins said:
shogunmark said:
gomylle said:
I just flashed my phone from Cingular 2.26 Aku2.3 w/a2dp FULLY LOADED *BETA* to this one but i guess it did not work correctly. The phone works fine but there are no ekstra ringtone or program or anything like that. What could have happened?
Click to expand...
Click to collapse
thats the rom i posted, i didnt include any extra ringers or theme's yet, risidoro's rom is different
Click to expand...
Click to collapse
Should you be at work...and if you are there shouldn't you be working
Click to expand...
Click to collapse
i am at work shhhhh......
Finally a ROM with all bells and whistles. I'll try out soon and looking forward for an AKU3.2 version whenever it will be stable and working
risidoro said:
I've never heard of a 2.26.11 radio stack. Maybe it was taken from some t-mobile beta rom.
However we'll never know how it performed since you overwrote it
Bye
Click to expand...
Click to collapse
Dangit. I was afraid of that. I didn't even think to backup my ROMs first since when it first booted, I just looked at the number briefly and thought to myself, "Oh, it already has the latest TMobile ROMs". But I did take a moment to jot down the numbers anyway. Then, a while later, after loading the Xelencin ROM, I noticed the numbers were different.
I wonder if the Tmobile download site has an updated download, of if this version only comes with warrantee replacements...
If anyone else gets a warrantee replacement phone, perhaps we can get the new 2.26.11 radio stack. I had my MDA replaced because the stylus wouldn't stay in and kept getting lost. Anyone else with that problem could get TMoUSA to replace theirs too.

Categories

Resources