New shipment of M2000 has Rom 1.31.00WWE - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Over on Modaco MrOrange has posted that the M2000 he has just got has the following ROM details:
Operator version 5.31.1.124
ROM Version 1.31.00 WWE
ROM Date 12/13/04
Radio Version 1.06.02
Protocol 1337.38
ExtROM Version 1.31.124 WWE
Anyone out there who has this version could they upload the contents of the Ext ROM??

I got that fw on my new one.. .
not sussed out how to mess with the rom yet.. im more a p900 man!

I am ringing Orange right now to get mine replaced under warranty!
Will let you know what happens....

They said they will replace it!!

Why don't you just wait for an Orange ROM update? Or wait till someone posts theirs on here?
I used to swap my phones under the insurance but now the following things have happened.
1. I'm a little older & wiser.
2. Orange charge admin fee for each claim.
3. If its like what happened to me, the courier doesn't show up and u get a courier failed delivery fee!
4. Chances are next week the Rom update will be on the Orange site.
and the most important one
5. It's fraud.

I could understand your point if my phone was more than a month old. But it is only two weeks old! It was replaced through faulty key pad before.
Also it saves me having to do the upgrades if they are done already.
Just cause they are replacing it does not mean that it will come with the new ROM anyway!!

Well yeah thats true I suppose,
Must admit I got my M2000 and 2 days later the keyboard was loose, I rang them up a few days later and got a brand new replacement, the replacement lasted for approximately 12 hours before the phone part buggered up (knowing what I know now, the radio rom was corrupted), then I got this one about the 8th December and its a good un...
I think if you are at the end of your contract and intend replacing your phone, its always nice to have a brand new replacement old phone to sell on ebay :lol: not my fault if the display goes off a week before you upgrade it eh?

Ive got the new version.

Turned up at 10.15pm this evening, has all the new ROM, BT, so I am pleased with it.
Have not tested it to see if everything works yet, but so far so good.

Sorry that was me posted as guest!! what a plank, didnt sign in!

How to i make an image for you guys then?

Well, what we could do with is the extended rom to start with. Best way to get at this is to do the following.
1. Download the Extended Rom Unlocker, copy to your PDA and install.
2. Then from Programs/Extrom Tools, run unhide. Then soft reset. You should now be able to see the 'Extended_ROM' folder in the route of 'My Device'.
3. Copy the contents of this folder to your PC and ZIP or RAR them together. Name the file Orange_UK_SPVM2000_Ext_ROM_131124.
4. Post to the Extended Rom folder on the BlueAngel FTP site.
Then post us here to let us know the job is done.
Thanks in advance.

It appears that some people have been sent out with the 1.12.00 Rom, so it seems like Orange are shipping out old refurb stock or they really did have some left of the old batch.
More reasons to post the new Rom on here! Hint Hint!

Ok going to try it now

Blackhorse you're a star! Upgraded parts of you 1.31 rom with parts of my own cooked 1.22.557 rom now my M2000 has the most up-to-date files on.

I have made a copy of the new Ext Rom but cannot remember how to upload it to the FTP site!!
If you could remind me I will do it ASAP.

jrmgolem said:
I have made a copy of the new Ext Rom but cannot remember how to upload it to the FTP site!!
If you could remind me I will do it ASAP.
Click to expand...
Click to collapse
Zip or rar your extended rom files. Now Right click on the newly created zip/rar file. Right click-->Copy.
Go to ftp://xda:[email protected]/BlueAngel/Extended_Roms and right click-->Paste
That should do the trick

done
http://forum.xda-developers.com/viewtopic.php?p=89691#89691

Hi,
Can I use this ROM on my (Swedish) Qtek9090, or is that looking for trouble?
With an upgrade I hope to be relieved from a very annoying bug in my current version (every once in a while the speaker from the phone is dead when I call or are being called; a soft reset "cures" that).
Hope anyone can tell me if it is (reasonably) save to upgrade with this new ROM.
thanks

You could potentially use the 1.31 ROM on your Qtek assuming that you want a English install. I wouldn't recommend using the 1.31.124 Extended Rom discussed here, since that is in the most part Orange UK's customisations, and not of much use to someone from Sweden.
I have had the same problem with the speaker on my phone, on ROM 1.22, Radio 1.06.02. Since I've only just upgrade to ROM 1.31 I can't tell if the problem is fixed.

Related

How you like your Fried XDA 2? Sunny Side Up?

Hello,
I was today handed a fried XDA 2.
My boss had attemted to flash it and it failed for whatever reason.
Now i will say from the outset that i have only ever flashed my XDA1 with a XDA-Developers ROM and it was a breeze.
The ROM file HE flashed with was called.
Xda_II_Upgrade_v16050.exe
Now when you switch the thing on.. all you get is a a small amount of txt saying
'Serial'
'v1.06'
and nothing else..
What have i done? Well i have sifted through the articles on here.. and found this rom
XDA-developers-SER-v12.exe
I have installed this on an SD card using xdatools.. WHOLESALE.. i.e. no moding of the files...
I have looked at 'http://wiki.xda-developers.com/wiki/HimalayaRomFlashing'
but as i can boot into the device.. i cant get the info it requires.
I am open to any and all help. And I'll even buy you a pint!
I am really at a lose.
Thanks in advance Guys and Girls.
It may not be as bad as you think.
It is in bootloader mode - currently in Serial mode and if you put it in a cradle connected to a PC (with ActiveSync installed) the bootloader should change to USB v 1.06. From this point you should be able to load a normal ROM from the manufacturer.
I have an i-mate, so am not sure what the current ROM version for the XDA II is, but I'm sure others will chime in with this information.
I upgraded to this version, not knowing I already had this loaded. You need to check the extROM version before upgrading as this appears to be way the official upgrades seem to change.
I had no problems and it was done through the Active Sync process
The file can be found here if you haven't already got it... http://www.my-xda.com/downloads.html
Try it again. It does take about 90 mins.
Regards
Nope... Nadda... Zip... Zilch.
Roit...
When i dock the pesky thing in the USB craddle.. it does display USB and v.1.06.
Activesync shows NO sign of knowing the XDA is there.
The ROM found at http://www.my-xda.com/downloads.html as suggested by flintanis fails with a ERROR 100: MODEL ID ERROR.
BRosenow what do you mean by 'load a normal ROM form the manufacturer' is that not what i have just tried?
Once again a pint for all contributors.. and my first born to the dude with the solution.
Cheers.
ActriveSync won't activate because it's in Boot loader mode but you can download the latest ROM Update from the manufacturer or cellphone service provider and load that to flash the ROM and complete the process.
If it's a UK XDAII, get the update at www.my-xda.com .
It appears the previous user tried to flash it with a ROM from another manufacturer (Q-Tek/MDA II/i-mate). You are now receiving a Model/Country ID error. I have not experienced this myself, but I have read posts in this forum on how to fix it. Do a search and I bet you will find it.
- OR - any user who has experienced this and successfully flashed his ROM could chime in here and give jonathh some advice . . .
After much ado about nothing..
i have returned to again fix this XDA2 (the joys of pesky FT employment; make your minds up guys.. you want this XDA2 fixed or not?)
Right i *think* with quite a high level of certainty that the XDA2 currently in my grubby mitts was purchased in Malaysia/Sinapore.
Now.. am i correct in that flashing it Xda_II_Upgrade_v16050.exe from http://www.my-xda.com/downloads.html
Would cuase the problem i have now.. or at the very least wont go on on the XDA2 now because it is a UK ROM and a Malaysia XDA2?
I have flicked thru the pages on here.. and i cant seen to see how to solve this!!
PPllleeasseee help
*sobs, and gently rocks back and fourth*
I think there is a bit of confusion going on in this post!
The first ROM you tried (XDA-developers-SER-v12.exe) is for XDA1 - NOT XDA2.
The best place to get the latest UK XDA2 ROM is http://www.sourceo2.com/O2_Developers/Devices/O2_Xda_II/XdaIIRom.htm
and i *believe* that the place to download the Malaysia ROM is
http://www.myxda.com/XdaII/serviceandsupport/template/XdaIISoftwareUpgrade.vm (note the absence of the '-' between my and xda...this is the Asian O2 website)
See if the ROM from either of those sites will install
Hope that helps!
How about scrambled?
Ok, thanks 'pope'
*none* of the roms suggest work..
Xda_II_Upgrade_v16050.exe reports unknown country code..
and the recently suggested
Xda_II_LaunchROM_v10311.exe just sticks on the 'checking for information' left it for over an hour! BUT doesn't report unknown country code like the other one.
I cant get the XDA2 rom from the Asia site, as after i registerd my XDA2 it reports i dont need the damn update... anyone got it already?
I have extracted the core files from both these exe's and tried to copy them to an SD card(the NBF fille) using XDAtools.. and xdatools report the files are invalid.
I am lost and clueless!
HHHEEELLLPPPPP
Well that didn't work...
I got my grimmy grits on another XDA2 and using XDAtools sucked the ROM off of that.. and then.. again using XDAtools squirtted it out onto an SD card..
But i am unsure what i have to do then? is this latest approach possible??
Comments welcome![/code]
Love to help… but
My UK O2 XDA II has exactly the same problem. I died whilst flashing the UK O2 1.60 ROM, and now I can't do anything with it. Identical symptoms. Identical complete lack of success (eight hours and counting).
How can I find out the country ID of my device when my XDAII is dead?
mark8barnes said:
Love to help… but
My UK O2 XDA II has exactly the same problem. I died whilst flashing the UK O2 1.60 ROM, and now I can't do anything with it. Identical symptoms. Identical complete lack of success (eight hours and counting).
How can I find out the country ID of my device when my XDAII is dead?
Click to expand...
Click to collapse
O2 will fix this for you if it happened as a result of flashing with their rom.
By they way, in case anyone was concerned when I said " I died whilst flashing the UK ROM", I did of course mean "it died..." ;-)
But I have solved my own problem! How come you can spend hours trying to find a solution, and as soon as you ask for help, you sort it out straight away??!!
I hope this works for you if you're still struggling.
1) Download the latest i_Mate ROM from http://www.clubimate.com/Support/RUU172126WWE_imate.exe
2) Download the XDAII Rom Editor from http://wiki.xda-developers.com/uploads/ER2003Edit_1_2_20.msi
3) Extract the files from the IMate ROM, and use the ROM Editor to change the Operator to 02. Get the instructions here and the password here
4) Flash the ROM as normal. It worked for me You could experiment with using the O2 extended ROM files rather than the T-Mobile ones, but I was just glad to get the thing working. Perhaps I'll feel braver later.
I did feel braver, and copied the O2 Cabs into the IMate Extended ROM file. Then I deleted the IMate cabs I didn't want, modified config.txt and prayed! Everything seems to have gone fine, and I'm now re-installing all the software. Already there seems to be a significant speed increase over 1.60.
I'd recommend taking this step before you flash the ROM, rather than doing it twice like I did.
mark8barnes is the man!
I didn't do the mods.. just as per your original post.. and it worked!! Yay
Thanks mate you da man!
Now i do have a query tho.. if i did suck the rom off using XDATools.. how would i get it bck on again?
Cheers all you guys..
Fried XDA
Hello Mark
Me too, I flashed my ROM with the UK version with the same result.
The link to the iMate ROM no longer exists, can you help me please. I'm a real novice at this.
Thank you
Ben (Aust)
mark8barnes said:
By they way, in case anyone was concerned when I said " I died whilst flashing the UK ROM", I did of course mean "it died..." ;-)
But I have solved my own problem! How come you can spend hours trying to find a solution, and as soon as you ask for help, you sort it out straight away??!!
I hope this works for you if you're still struggling.
1) Download the latest i_Mate ROM from http://www.clubimate.com/Support/RUU172126WWE_imate.exe
2) Download the XDAII Rom Editor from http://wiki.xda-developers.com/uploads/ER2003Edit_1_2_20.msi
3) Extract the files from the IMate ROM, and use the ROM Editor to change the Operator to 02. Get the instructions here and the password here
4) Flash the ROM as normal. It worked for me You could experiment with using the O2 extended ROM files rather than the T-Mobile ones, but I was just glad to get the thing working. Perhaps I'll feel braver later.
Click to expand...
Click to collapse

T Mobile UK official update

I'm new round here, but just received a T Mobile update. The file is MDA3_TMUK_v106160_SHIP0307.exe I've put it in the root of the ftp server, since wasn't allowed to put it in a more appropriate place. Hope that's OK.
BTW it does seem to have improved my audio quality, which was the reason I asked for it. It didn't come with release notes, so I don't know what else is included.
Strangely, although the updater worked, and as I say it has fixed my problem, when I look at device info it still shows ExtROM 1.06.117 WWE.
What have I misunderstood?
I think this is only an update to give Blackberry access.
Okay guys,
So you know the next question... can anybody extract the blackberry app so I can try it on my XDAiis as the other ones don't generate a PIN!
yes please, same for me. I would love to have the UK blackberry application.
thanks in advance for anybody who can remove the BB application out of this ROM update.
Ronald
T-Mobile UK Official Rom Update
I have just received this update as well.
Can one of the technical wizards on the site (such as MDAIII user) have a look at what is in the extended ROM, as well as Blackberry.
T-Mobile say that they have included a number of other patches for bluetooth etc. Could someone list exactly what has been changed over the base ROM.
After buying my device nearly 6 months ago and waiting this long whilst all my O2 and Imate cousins have had lots of upgrades to the radio and base rom, I am deeply unimpressed. :evil:
Thank you in advance for any assistance.
J
Same Here!
Hey all,
Well Jason, I feel exactly the same way. :roll: Been long waiting any updates and hopefully this update solves some of the following problems. Just doing a Full Backup, before update is applied! I will reply when installed with any updates to software revisions for bluetooth/rom/extended rom/etc.
*Such as Bluetooth dropping its connection from Weak to Good continuously when connected to me Jabra BT200.
*Another problem is that when firstly I soft reset the device it hangs whilst booting on the second T-Mobile screen, and have to soft reset the device 2/3 times rapidly before it boots properly. This can be a problem if its hung and you urgently need to make a phone call.
Anyone else having these problems?
Apart from that everything else seems to be in working order.
Sunny D
I downloaded the upgrade and ran it agaist the new tool.
This seems to be a 3 version of the encription as the tool will not open the file.
unless somebody posts the cabs ( In a subdir of the root of the ftp site) I can't look at them.
As per my above post shows I was just about to update my phone but no-one said it would lock my networks!.....I just didn't think of that!
Well I've just installed it and it has Locked the networks. It was unlocked to all networks, and not anymore.
Looks like I'll have to pay again to unlock it! Unless someone can help me unlock my MDA III!?!?
---------------------------------------------------------------------------------------------
Rom Version: 1.06.00 ENG (No change)
Rom Date: 08/05/04 (No change)
Radio Version: 1.00.00 (No change)
Protocol Version: 1337.30 (No change)
EXTROM Version: 1.06.160 ENG (Wasn't displayed before update on phone)
Bluetooth: Build 3500 (Was Build 1900)
---------------------------------------------------------------------------------------------
So overall probably just a Bluetooth Update/Blackberry support and Video MMS. Not a great update, probably not worth the update considering I can only use my T-Mobile Sim for now!!!
Well MDAIIIUser what cabs do ya need? I'll try!.....Copy them of my Phone or PC??....& need to know where to find them??
Sunny D
Did I understand what you wrote
you had a phone that was sim locked
you had it unlocked so that you can use any sim
you ran the above upgrade on your unlocked device
now you have a locked device and you can't use any sim that you like but have to use a t.mobile sim
Well that is what I understood
As for the cabs
They are in the extnded_rom folder that is hidden
you need to download the tool, check wiki for the link (if its still around)
Zip the file, and uploaded it
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Tools
ta
If you paid T-Mobile to unlock your MDA they should unlock it again for you without charge.
Anyone managed to get the Blackberry CAB out yet?
MDA III UK Upgrade Didn't relock my phone
I have tested out my phone after the upgrade and I am pleased to advise that it is still totally unlocked.
T-Mobile unlocked the original ROM for me for the £15 charge and the phone has stayed unlocked even after the upgrade (just as well!).
SunnyD - thank you for your work in helping to analyse what is new in the extended ROM.
Hi guys. Never posted before but been around.
Was once able to access the ftp but lately I get a permission denied message. Anyone got any advice on how to overcome this?
Found the ext rom 1.06.160 ENG on ftp site and linked it to wiki, Thanks sunnyd24.
Will cook it and post in wiki as well as update this thread.
The file you are looking for is:
htc_pocketpc_tmo_england_2.0.0.25-18.cab
The rest of the rom seems the same (looked at it for 30 secs)
Managed to access the ftp in the end. Was being stupid really... :?
Posted this ship.exe in wiki
Moved it from root to the correct folder
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
Files to Examine......or Use!!
Hello all,
Not a problem Jason, we are all here to help each other. Well I just tried another sim (old O2 & Orange) after the success you had, & guess what It is unlocked!!!!
I've got a problem with a new O2 sim i'm using. Its new & was working in the phone before the update and kept sim card whilst the update. And now cannot use that sim in the phone for some reason!
Its wierd how an old O2 sim works fine but the new one has problems.
:?: Anyone got any ideas??
Well as for helping everyone with version info for MDAIIIUser I am going to upload the new extended rom files to the FTP Site (and attatched below as a Rar). Hope it helps everyone!
Well all for now,
Regards,
Sunny D
Passwords
Has anyone got the passwords for this old ones dont work
Passwords
Has anyone got the passwords for this old ones dont work
Sunnyd24
Both the ship and exteneded rom for the 1.06.160 have been posted in wiki (as per the posts that i wrote before) Think the only file you need to attach is the one for BB (as ...)

Looking for 1.40 ROM for PDA2k

Ok... I want to upgrade my PDA2k, but am a bit on the chicken side. Has anyone created or cooked a COMPLETE ROM for the PDA2k that they can post a download link to?
I can do the flash myself, but don't know how to cook a ROM and don't have the tools. I would appreciate any help I can get.
Thanks!
ROM Upgrade
Read this site. It's all here.
This FTP site has the ROM for Blue Angel. I used this one to upgrade my PDA2K. Works much better than the released version. Only problem is with sound after using the built in MS PocketPC CLOSE command; just don't use it, use another program like "Launcher" that has it's own CLOSE command which does not cause the problem.
Here is the FTP link: ftp://ftp.xda-developers.com/BlueAngel/BlueAngel_Roms/BA_1.40_radio_1.20_untested_extrom/
ChrisSpera,
Can you post a reply once you do the upgrade? I'd like to do it too, but I'm not as sure as you are on what to do. I also have a PDA2K from the US and would like to know how it goes.
Thanks,
Tom
Well, I got a little help from one of the patrons of this site, and I did get my PDA2k flashed with the 1.40 ROM, 1.12 Radio, and am working with a somewhat baked extended ROM. I've actually been tweaking it most of the day.
If you're using Cingular with your PDA2k, make certain that you grab the Cingular settings file from Club i-mate. You'll need those, as the settings in the SX66 ROM I used aren't quite right, though they work. Applications that automatically dial out via GPRS will not function correctly with the Connection Settings in that ROM. I am working with the guy that helped me to test the fixed connection settings, and when they are fixed, I'll let you know.
If you're using T-Mo, then make sure you get THOSE settings from Club i-mate and use those instead.
All is good, though! It works! I did have one hiccough, though; as my PC lost connection with the device BEFORE any flashing started. I bounced the box, leaving the device in the cradle, and was able to pick it back up from the beginning without any problems.
The device seems snappier. It connects to the PC faster, and boots faster. Pretty cool all told!
Thanks for the feedback! I hate to say this but I already started. It's been pretty slow in the office today, so I said...what the hell...and went for it. Wish I knew about the tmobile thing though. I'm just finishing the upgrade.
Where do I put the tmo information? Or, what do I do with it?
Tom
Chris,
What version is your extended ROM? Mine is 1.22.162 WWE
BTW, mine had the same problem with losing the connection. It's happened twice now. I updated my radio and the same thing happened. Strange.
Tom
I am using the SX66 1.40.110 (i think) version of the extended ROM.
If you go to the support area on club imate, and click on the Operator settings link in the support downloads area, you should be able to find a download link for a CAB that installs T-Mo connection settings. download it and use it to create your connections settings on your device.
I downloaded it and installed it. Didn't find it real helpful. I still had to go through everything to get mms and email setup. Oh well. Thanks for the tip though.
I've had it up and running for the past 24 hours and while I think the OS works a bit better I can't see a huge improvement. The phone is more responsive though.
Any notes on changes would be helpful. I did notice that the BT connects had a strenght signal now, which I find really helpful.
Question: Was this upgrade supposed to do anything to the extended ROM? Because the version is the same as before.
Thanks,
Tom
ChrisSpera said:
I am using the SX66 1.40.110 (i think) version of the extended ROM.
Click to expand...
Click to collapse
I just comprehended your post. Sorry about repeating the question when you already answered. How, or why, should I upgrade the extended ROM? I take it the upgrade I just did did not put the upgraded files in the extended ROM?
Tom
The extended ROM, which is about 16MB in size holds the custom software that comes on the device. You don't have to upgrade it at all. You can leave it be if you're happy with the software that's there.
Correct me if I'm wrong, but shouldn't the upgrade that was just performed by you and I install the new files into the ext rom automatically? Or, do I have to do it manually....copy the cabs from the laptop to the ext rom?
I've just been reading about cooking an ext rom and I'm going to give it a shot.
Tom
that depends on the files the update contained. Look for *.nbf files in the temp folder you launched the update from. What was in there? MS.nbf is the OS, radio.nbf is the phone and nk.nbf is the extended ROM.
I think I screwed something up. radio.nbf and nk.nbf were in the temp file but MS.nbf was not. Was it in yours? I believe I pulled the same file as you did from the link provided but there's no mention of it in there.
I also took a look at my extrom folder and none of the files that were listed in the link are in there nor loaded. I guess I'm getting things confused. Did you copy all the cabs into the extrom folder then run BAUpgradeut.exe? I just ran BAUpgradeUT.exe and thought they'd copy them over. I think I was wrong.
Tom

where i can find the T-mobile ROM and Radio for Diamond

I have searched a lot of places, please help. Where I can get the latest T-mobile ROM and Radio for Diamond? Thanks a lot.
I think you will struggle. I looked for quite some time before flashing my MDA with Swiftblades ROM (in case I needed to send it back for repair). In the end I gave up and just went for it!
here you go
http://forum.xda-developers.com/showthread.php?t=406327
indie said:
here you go
http://forum.xda-developers.com/showthread.php?t=406327
Click to expand...
Click to collapse
The thing with this link is you have no idea what SPL you need to use do you? I havent flashed mine yet from t-mobile stock but Im aware you need to use HardSPL to flash a cooked ROM right? In which case what does this .exe do and what HardSPL does it need.
Like the poster - I like the security of being able to role back....not so keen on a one way ticket even if everyone seems to tell me its the way to go to bring the diamond to life..
Yes, I am looking for the latest ROM and Radio for MDA Compact IV, I don't know if the ROM upstaires of UK is the right one for T-Mobile MDA Compact IV.Please help. If the theme color is pink? Thanks a lot.
do not flash to the rom in the link provided as this is a very old version of the ROM which is extremely slow, instead wait for someone to dump the new ROM (or just keep the old one as a failsafe for warranty like i have) and go to a cooked rom instead ^^
Addicteddddd said:
do not flash to the rom in the link provided as this is a very old version of the ROM which is extremely slow, instead wait for someone to dump the new ROM (or just keep the old one as a failsafe for warranty like i have) and go to a cooked rom instead ^^
Click to expand...
Click to collapse
That link has all the same versions as what T-Mobile are currently shipping...it might be very old...but its what Ive got at the moment...just dont know how to use that .exe and what SPL etc.....
Does anyone know how to dump the rom currently in your phone out to something that you can reprogram it with later if needed?
[Q] MDA compact IV (German T-Mobile)
i have the same Problem.
The German T-Mobile-Version has changed/invertet HW-Buttons!
The original
So, if i find a ROM and Patch my MDA4, will it work? Or do i need a very special version beacuse of the invertet HW-Buttons (Keys?)?
Where may i fond a "how to" to find the way to find the right ROM i can use?
tnx
I have just got a replacement from t mobile yesterday. It is the same version in this page. No new version has been released yet. I use hardspl 1.24 from jocky and then use duttys v2 rom. Works ok. When I had to return mine i used the above link and then used SPL 1.37 which it ships with. You can find stock spls by doing a search.
indie said:
I have just got a replacement from t mobile yesterday. It is the same version in this page. No new version has been released yet. I use hardspl 1.24 from jocky and then use duttys v2 rom. Works ok. When I had to return mine i used the above link and then used SPL 1.37 which it ships with. You can find stock spls by doing a search.
Click to expand...
Click to collapse
Why did you get a replacement - was it to try and get one with a newer ROM? Ive got a week left in which to return mine if I want to - which I dont. I really like the phone but its a bit slow and klunky with 1.37.x.x
Nice to know youhave managed to use that .exe though...so you whacked SPL 1.37 on it which you found somewhere on here and then executed the .exe and bosh....back to old ROM/Radio?
neilsupermac999 said:
Why did you get a replacement - was it to try and get one with a newer ROM? Ive got a week left in which to return mine if I want to - which I dont. I really like the phone but its a bit slow and klunky with 1.37.x.x
Nice to know youhave managed to use that .exe though...so you whacked SPL 1.37 on it which you found somewhere on here and then executed the .exe and bosh....back to old ROM/Radio?
Click to expand...
Click to collapse
yea. Thats about right. First you have to flash the stock rom and radio in the link. Then last of all get the stock spl and flash it. Then it will be like the stock t-mobile you will get from the shop
the phone was faulty. thats why it was replaced. It came with the same old rom though.
anyone know now what to do with a t-mobile MDA IV ?
I am still not able to decide if i will buy a t-mobile (can get it for 300 euro, no contract) or buy a original.
I've given in and bought one, and, hopefully it will be here by Thursday, it works out at £285 over 12 months but only 150/150 mins/txts (I've only gone over that twice in the last 2 years)
I've had my mdac3 for 18 months and it has been returned/replaced 5 times, every time it has had a 'non tmobile' rom on it and they haven't batted an eyelid, so why is everyone suddenly worried about flashing back to an original rom? Surely if your phone knacks up badly enough that it has to be returned then you would struggle to put the old rom back anyway?

Best dutch rom

Hey, I got a MDA compact IV branded from tmobile, but its starting to get on my nerves, and I want the original theme, so I figured I've got to put a new ROM on, now what rom is the best for a Dutch tmobile MDA compact Iv?
thanks in advance
i use A.Z.T.O.R. X2 (V11)Ultimate NLD based on latest Official ROM
you can find it here :http://forum.xda-developers.com/showthread.php?t=422417
there aren't many dutch roms, but this is probably the best one.
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
VerusAmos said:
It seems to be nice and clean... Just a heavily tweaked ROM.
But these are Diamond ROM's, are they good for the MDAcompactIV?
Another thing, when the next Dutch ROM update comes from T-Mobile (if it ever comes) will I be able to update?
Click to expand...
Click to collapse
I also got a MDA Compact IV...since 2 weeks I run the aztor v11 rom, and man what a difference. Much faster.
Just try..
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Ok, I've tried two times to do the update as I just ran the [exe] file on my PC, but I get the [262] update error.
When it updating the bar sticks on 0%, as well on my phone. Luckily after detaching the battery for 3 seconds, my phone just soft resets. What now???
I've done some research but with all the different versions and languages I got really confused. I need another spl to install the [nbh] in order to update the X2 update. But I cant find a way to run the [nbh] file.
I'm also afraid that I'll ruin my MDA. So I searched for a original spl and ROM, but I can't seem to find the right one. I also unable to determine which spl I have on my MDA. It should be a dutch T-Mobile ROM (& spl???). The warranty period isn't over yet so I might need it. (But I hope not of course).
This flashing thing is really confusing...
Same problem
I have exactly the same problem trying to change the ROM from uk vodaphone to Duttys V4. The strange thing for me is that I have 2 Diamonds (his and hers) and the first one went through the process like a dream.
I'd be very grateful to find a fix
VerusAmos said:
Okay, all good.
But here comes the noob question... I already dl-ed the [rar] file, there's a [exe] file in the as well as a [nbh] file. Are these the only files needed for flashing my rom? How do I do it? Do I run the [exe] file on my PC or my phone?
Tnx in advance...
Click to expand...
Click to collapse
First I ran Olinex hard-spl 1.40, after that I rename the .nbh file tot DIAMIMG.NBH, copy that file to your internal storage and than flash from the internal storage. Read this
If above is still abacadabra send me a pm, then I will translate this in dutch.
best rom questions?
to find out whats best for you is to start flashing.
this question is not welcome here on this forum.
as it always end in a flame war.
thread closed.

Categories

Resources