How to replace buid-in application ? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I have upgraded to the latest Belgian Rom for my Qtek 9090 and I have problem with sending MMS. I have the version 2.0.0.16 of MMS composer and I would like to go back to an earlier version as I had no problem before the rom upgrade.
Is it possible to remove the actual program or should I install an other (older) version without removing the actual one ?
Thanks in advance for your feedback.
V.

This app should be being installed from your extended rom. So you should be able to delete it from your ExtRom and replace with an older version. Then perform a hard reset, to re-install everything.
Have a look in wiki.xda-developers.com under Blue Angel for some clues on how to do this.

Related

SMS & Email White Screen

i know that this topic was solved here previously, but i couldnt find it inspite all of the search efforts... so i really appreciate the effort if u can help me solve the problem or guide me to the topis that it was solved in.
whenever i open an sms to read it or try to compose a new one i get a white screen and i cant view or type anything.
my device PDA2K
ROM Version 5.03.02 WWE
ROM Date 03/02/05
Radio Version 1.13.00
Protocol Version 1337.42
i even installed the newsest BA_WM05_patch 2 and fixes from here...
thank u in advance
i downgraded to 2003se, file explorer, emptied the folder called (storage) where the wm5 saves it self, upgraded to wm5 BUT WITHOUT the MMS fix and it worked perfectly, while on another bluangel (for a friend) i upgraded his BA to WM05 including the MMS fix, the .net frame work 22 and the local settings for the service and it is working fine... so is it cause of MMS or not?
shall i take the risk of installing the MMS with the frame work and setting without worrying about going throught the cycle again?
please advice

8125: Complete upgrade and customization, or just upgrade??

Hello there,
Cingular 8125 owner,
Some one posted that we should reset the device right before the manufacturer customization settings start running.
What is the difference if at the end of a succesful installation, we copy the cab from the original extrom?
Aside from the bootup logo, and some small specific apps, some users are reporting that with the Qtek upgrade, Syype is being installed.
Thanks in advance for your reply to this matter.
your sig says you are running 2.17.7.2 so you already have the new rom. With this rom Skype does not get installed as it is not in the EXTRom. Imate's 2.16.9.1 has skype and someone could probably give it to you from there if you want it. The Qtek rom that you are using doesn't really have any cabs that are not useful. no bloat. But don't use Cingular's cabs after the upgrade.

T-Mobile USA MDA v 2.17 Running Goodlink....

Has anyone else attempted to get Goodlink to work on another ROM aside from the stock TM ROM? I have tried both 2.16 and 2.17 and after reboot it just hangs at the password screen. If i reflash the stock ROM it installs and works fine. Any ideas?
Also. With 2.17 installed now, there is no "password" icon in the programs or settings group. I dont know if this is related.
Please help
Rom Upgrade and Goodlink Problems
Hi,
I am a bit of a newbie but could not get goodlink to work once I upgraded my rom. I am on a Qtek 9100. The rom it came with worked. The test rom out there worked and then the 2.18 rom didn't. I had a lot of trouble downgrading but eventually ended up back at the test rom. If you need a copy drop me an email.
good luck
Markus
thanks!
What ROM ver are u running now?"?
No luck here either. Decide to pull it off my Wizard (via hard reset), as I prefer the 2.17 ROM over stock. Figured its worth the trade-off since I'm using push mail at this point anyway.

After upgrade contacts not working

Hi i have a problem with the contacts button. When a want run contact list its blink only and close. Please help me solved my problem i am beginner. Thanx
If you provide more information maybe someone will help you
Which rom do you use ?
I have helmi aku 3.5 v 1.4 but i tried xplode aku 3.5 too and i had the same problem. Before i had a BA 5.1.1700 build 14343 version and my device is qtek 9090.
i think that this is hardware problem, you must contact any near service for repairs
But when i upgrade my device to previous windows (5.1.1700) contacts works correctly.
Do you have any additional software installed? Make sure you've follow the installation in wiki and do not install any 3rd party software.
i ve installed only Rom, radio and extrom, nohing else and it doesnt work. When i install sim manager i dont copy sim contacts to contacts list cause it freezes.
which extrom you install ?
if it is by some operator as ms_.nbf this is the problem
Look when i install only ROM without extrom i have this problemm too so i think that the extrom isnt problem.
Problem Solved
Will you share with us what causes the problem, for future reference
1.Rename file pim.vol to e.g. pi.vol
2.Soft reset
3.Delte pi.vol
4.Backup contacts with PPCBckpContacts
i just got the same problm today. where do i get the pim.vol file?
What's the resolution? just curious.
ljex said:
Problem Solved
Click to expand...
Click to collapse
ok nvmnd. founf pim.vol and renamed.softreset and now i have Contacts.
thx for the solution

How do you obtain the original ExtROM 1.15.405.101

I just got my HTC P3600 few days ago. I am still researching about flashing ROM and stuffs. I really wanted the GPS, but it seems that it comes with many problems. If I somehow want return back to the original ROM (ROM ver 1.15.405.5 WWE) from RUU, will it include the ExtROM ver 1.15.405.101 in the download? If not, do anyone know where I can access the ExtROM ver that came with my phone initially? Thank you very much for your help.
If you get a full RUU (which is usually the case), it will include everything, including extROM.
Tofush said:
I just got my HTC P3600 few days ago. I am still researching about flashing ROM and stuffs. I really wanted the GPS, but it seems that it comes with many problems. If I somehow want return back to the original ROM (ROM ver 1.15.405.5 WWE) from RUU, will it include the ExtROM ver 1.15.405.101 in the download? If not, do anyone know where I can access the ExtROM ver that came with my phone initially? Thank you very much for your help.
Click to expand...
Click to collapse
Download Hemes MountAllextrom.cab and run it on you device soft reset and your ExtendedRom will be visible(NOT writable),Copy/Paste it to your storage card .
Thank you very much for both of your advice. I will try that. Thanks.

Categories

Resources