Related
HAS anyone uninstalled or overrided IMATE UPGRADE rom and reverted to original CINGULAR 8125 ROM? IF so, please list steps. I'm within 30 day period and don't want to send back with HTC and IMATE info and splash pages
Thanks
same here.. please help someone.. someone...
i had the same issue, and didnt find original, but for what its worth, exchanged my 8125 with no problem with i-mate rom.
good luck!
IF you can find someone with an SD backup (you shoulda made one when you started screwing around!) this is trivial to do.
Otherwise its somewhat of a PITA......
could you please outline the steps needed to accomplish this simply?
I am currently back at the cingular rom, but I could not restore the extended rom.
Basic rundown, After screwing around witht eh imate rom, decided to try to go back, found out I could not.
There is a particular issue with imate locking the extended rom, and problems running awizard and lokiwiz on a imate rom.
So, I went a round about way (suggested by someone else).
I used the tmobile uk rom (comes with same installer as teh iamte one), once that was installed, I ran awizard, which ran fine, and restored my cingular rom and splash screen (this is of course assuming you made a backup of the rom the first time around).
Only thing I cannot do, is restore the cingular extended rom.
Hello folks,
Today I flashed with the ROM in thread 'T-Mobile USA 2.17 ROM (Custom)'. After it came up, I ran through the screen align and wizard. When it was all done installing extended rom etc it restarted on its own. After booting back up, everthing was really slow and there was no cell signal. The battery icon had an ! mark on it and when clicked, it says unknown battery. At this point everything keeps freezing and genrally not working including no activesync connection possible. I restarted into the bootloader and tried to flash again. It completed, but now I just get the tmobile boot screen, and eventually it restarts again, never completing the boot. This is when I notice that it doesnt seem to have a radio rom (GSM) version listed, but rather a gap where it should be. I ended up pulling the battery out and trying to get back into the boot loader again, and now I cant get it to power on in any way.
I guess that is enough said. The only other thing to note is that everything was working fine prior to the attempted update, I was merely hoping to get a performance boost, as I was using the original rom.
Any thoughts?
Thanks!
B. Ramsey
Fixed!
No other ROM would install, but in reading back through threads, I found a link to RUU_Prodigy_1081002_108_10910_TMO_US.exe. After installing this, I had my GSM rom back. Then everything worked. I think the not powering on issue had to do with the fact that it sat in the bootloader screen for several hours at one point. Since there was no standby, the battery was wasted. I am attempting to reflash it now to 2.17, we'll see.
No dice
After installing the 2.17 ROM, no more GSM, and same problems. I reflashed back to the previous and it works again..
Re: Fixed!
pterodyne said:
No other ROM would install, but in reading back through threads, I found a link to RUU_Prodigy_1081002_108_10910_TMO_US.exe. After installing this, I had my GSM rom back. Then everything worked. I think the not powering on issue had to do with the fact that it sat in the bootloader screen for several hours at one point. Since there was no standby, the battery was wasted. I am attempting to reflash it now to 2.17, we'll see.
Click to expand...
Click to collapse
THANK YOU SO MUCH for posting this! I also had a brick because of the same setup - trying to use the custom TMOBILE ROM. I had the same symptoms you did - basically non-responsive and no radio stack and no USB connection. I was not getting anywhere with any other ROM. Now, at least I have a working device.
Still no AKU2 though
Let me know if you manage to get an AKU2 ROM on your device!
That's worrisome. Do you know if the CID unlock was successful? (I think it's scripted into that custom upgrader)
If you're feeling adventurous, you could try intalling the custom 2.17 Cingular upgrader I made (it's on the FTP server). If that's successful, then the problem is with the T-MO upgrader. Based on all the folks having success with that T-MO upgrader though, I imagine the only issue might be a corrupt download. If the Cingular upgrader results in the same behavior, then the problem is either with the CID lock or some odd hardware problem.
I'm truly perplexed by the issue you're having..sure wish I knew how to help ya.
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
pterodyne said:
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
Click to expand...
Click to collapse
My device is a QTEK 9100. I was upgrading from the ROM on my device when I got it:
ROM 1.1.7.5 9/22/2005
Radio: 01.01.10
Protocol: 4.0.13.16
ExtROM: 1.1.7.105
My carrier is TMobile, so I figured the TMobile custom rom that was built off of the latest QTEK would be a good bet for me - but instead I ended up with no Radio.
I have the IMATE ROM you refer to - maybe I'll try to go to that as an interim step to get to the QTEK ROM I really want, since you had success with that method.
What I don't understand is why the Vanilla QTEK 2.17 (which is what I tried after the TMO Custom 2.17) gave me problems. I don't recall the exact error message, but basically it said it couldn't use that ROM on my device.
pterodyne said:
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
Click to expand...
Click to collapse
When you say it was already unlocked, don't you mean SIM unlocked? It would be unusual to buy a phone that is already CID unlocked.
I bought the unbranded k-jam from Simoncells.com. All I did was put my tmobile sim card in it and it worked. I guess I dont know the difference between SIM and CID unlocking.
Well theb that's where you went wrong, sim unlock refers to ur phone being able to use any world sim card...cid unlock refers to country Identification...if ur fone is not cid unlocked then wen u install foreign roms it will bugg up ur fone...dats wat happened to u and that other fellow pterodyne...I sim and cid unlocked my fone. ran the tmo 2.17 custom rom without a problem....plz do ur research on upgrading roms b4 u bash them...most factory fones don't come cid unlocked so I'd b surprised if urs did (tho it prolly came sim unlocked)...
Hi,
Ever since upgrading to 2.17 (official QTEK version) I can no longer get a stable WiFi connection - I get poor signal displayed even though I am next to the AP and it can take anything from 5 to 20 attempts to get connected.
The 9100 came with 1.6.7 installed which not perfect more or less connected first time, but I hoped the later ROMs would fix some other stability problems.
I have tried AKU 2.3 and I still get the same issues (plus I miss the battery indicator in the top bar).
Also, I cannot get back to 1.6.7 (I managed to get the OS back to it but the other 2 were stuck at 2.4) as every time I try I get vendor ID is wrong.
Any ideas?
Cheers,
Taomyn
I have the same problem, but even worse. I see the network after connecting it says it is connected but I cannot browse or do anything on the "socalled Internet" DHCP says that it found an adress in my case at home 192.168.1.33.
I am not sure if an upgrade would help.
My wifi version is 01.04.10
I am looking for any idea too.
Just an update, though the problem remains.
I have downgraded the OS to 2.17 as it seems better than the later ones posted and is at least a QTEK one.
Still hit and miss with the WiFi
Does anyone know if there are any later QTEK ROMS available?
search this forum to find a solution to downgrade the rom version to 1.x then do CID unlock using aWizard.
or you should try upgrade to cingular 2.25WWE rom to see if there is any improvement.
huangyz said:
search this forum to find a solution to downgrade the rom version to 1.x then do CID unlock using aWizard.
or you should try upgrade to cingular 2.25WWE rom to see if there is any improvement.
Click to expand...
Click to collapse
I did try various of the downgrade tips but none seemed to work even though I've got a G3, so hopefully the LokiWiz will be updated soon to work on v2 ROMS.
The Cingular 2.25 ROM didn't work very well either and I hated the extra rubbish it comes with. The radio ROM I happen to be using was from that same one.
I suppose I could go for the 2.25 OS but not the Extension - would that leave behind the Cingular crap?
Taomyn said:
I did try various of the downgrade tips but none seemed to work even though I've got a G3, so hopefully the LokiWiz will be updated soon to work on v2 ROMS.
The Cingular 2.25 ROM didn't work very well either and I hated the extra rubbish it comes with. The radio ROM I happen to be using was from that same one.
I suppose I could go for the 2.25 OS but not the Extension - would that leave behind the Cingular crap?
Click to expand...
Click to collapse
I now run 2.25rom without its original Extrom. It works perfect for me.
huangyz said:
I now run 2.25rom without its original Extrom. It works perfect for me.
Click to expand...
Click to collapse
Thanks. I have now loaded the following but with the QTEK 2.17 Extension ROM:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS: 2.25.11.1
I will have to wait until tonight to try the wireless at home.
One thing I've noticed is that I don't have a battery indicator at all now, neither in the Today window or the bar at the top. I'll dig around more to see why this has happened.
Taomyn said:
huangyz said:
I now run 2.25rom without its original Extrom. It works perfect for me.
Click to expand...
Click to collapse
Thanks. I have now loaded the following but with the QTEK 2.17 Extension ROM:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS: 2.25.11.1
I will have to wait until tonight to try the wireless at home.
One thing I've noticed is that I don't have a battery indicator at all now, neither in the Today window or the bar at the top. I'll dig around more to see why this has happened.
Click to expand...
Click to collapse
it looks a little strange that you have a 2.25OS with 2.24IPL/SPL. :?
you could put a bat. icon on task bar by running Windows\Init_Tray.exe
Ok so I still can't get WiFi working :-( but at least I've sorted the the battery indicator out (thanks to a reg tweak for AKU2.2)
Which leads me to this AKU stuff. I keep reading about 2.3 but I'm not sure if this is an official release or something that someone has put together. I'm willing to give it a try but not if it's just 2.2 with some tweaks or something like that.
Can anyone shed some light on the AKU releases? Mine definitely says 2.2 at the moment.
Oh and can I simply create an upgrade file with just the 2.3 OS file in it?
TIA
Ok, my WiFi is still borked, it sees AP's all over the place but the ones I know it should connect to the phone just will not lock on to - it tries for a few seconds then simply says "Unavailable".
Currently I have on the phone a combination of:
IPL: 2.24
SPL: 2.24
GSM: 02.25.11
OS:2.24.10.1 WWE
Protocol: 4.1.13.12
ExtROM: 2.17.7.102
WM5 5.1.95 (14955.2.3.0)
I've actually tried what should have been a later OS, 2.25, but the AKU was 2.2 and the copyright message shows 2005 where as this one is AKU 2.3 with 2006 displayed.
I'm thinking now that perhaps the Extended ROM which is from the latest QTEK build I could find. Can anyone suggest a good replacement for it that doesn't have a load of baggage and only useful customisations?
As a last resort I'd like to try downgrading back to full 1.x ROM (QTEK 1.6.7 I think) but as I understand it this may not be possible. If it can be done, can anyone point me in the right direction i.e. which downgrade ROM to try? Yes, I have gone through this forum but it's almost "information overload" and very confusing,
TIA
if you update to shipped Cingular 2.25WWE rom, you can bypass all the extrom and see if wifi works normal (before you install other apps.)
Mine is ok.
the AKU2.3 one is a custom test rom which may cause slightly unstable.
while this still doesn't work, i think there's no means except sending your device back for checkup and repair.
Thanks, but how do I "bypass all the extrom"? Is there a clean extrom I can use with it?
Ok, I'm making progress.
I followed the instructions for downgrading, which although says it won't work for 2.21 or above, sort of does.
I downgraded to the custom 1.5.4 which succeeded but left SPL still at 2.24 but everything else had changed. I then ran the LokiWiz v0.2b and that seemed to succeed too at least there were no errors.
I then tested WiFi and it locked and connected first time - yay!!
Next I have taken the 1.6.7 QTEK ROM (which the phone originally had) and when that finished both IPL/SPL were downgraded to v1.x - WiFi still working.
At least now I know that WiFi is not borked but it's some strange ROM issue.
I'm going to try QTEK's 2.17 ROM and see what happens - at least I know I can get back to 1.x if it still doesn't work.
This is fun - not!!
Taomyn said:
Thanks, but how do I "bypass all the extrom"? Is there a clean extrom I can use with it?
Click to expand...
Click to collapse
after the RUU completed and restart automatically, after those init setting you must follow(eg. align screen, select time zone, etc.), at the moment when u see "customize within 3 seconds", poke the reset hole as quick as you can. Then you Bypass the extrom installation.
Thanks - you are being a great help, it's much appreciated.
I went back to 1.6.7 then added the Cingular 2.25 OS ROM but with the QTEK 2.17 extended ROM. What a mixture that is! WiFi would not work. I then hard reset and used your bypass technique - WiFi now works.
It seems that an extended ROM application is screwing up WiFi so I need to get everything up to the latest and greatest, bypass the extended ROM then one by one run them to see which is the culprit.
The plot thickens......
Well it looks like *any* v2 ROM screws up the WiFi on my phone and I have no idea why :x I have tried various combinations of ROM parts (proving the phone is most definitely CID unlocked :wink: ) and I either have no WiFi or some which progressively gets worse as time goes on to the point it stops connecting again.
I'm back to the original 1.6.7 QTEK WWE shipped ROM and WiFi works flawlessly but I'm now missing all the nice tweaks of v2 and I'm sure my BT headset doesn't work as well as before.
Maybe the next release will be better :?
Just to conclude this thread. The 2.26 ROM recently released seems to have cured my WiFi woes and it has made my phone run so much better than before.
I recommend it to anyone
Taomyn said:
Just to conclude this thread. The 2.26 ROM recently released seems to have cured my WiFi woes and it has made my phone run so much better than before.
I recommend it to anyone
Click to expand...
Click to collapse
Cheers!
wifi probs with 2.26
i just upgraded my MDA USA to this ROM. My wifi now doesnt connect. It was working fine with ROM 1.08. Any suggestions? I havent tried bypassing the ext ROM, will this work? thanks
Same problem here as above
I got same wifi problem when upgrading from 2.25 to 2.26 .
i am going to revert back to 2.25 which is from the imate website. and hope it sorts it.
will get back to you when done.
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Is my fone a lemon? I did the upgrade to WM 5 Crossbow 3.0 upgrade for my friend 8125, downgrade it to 1.1 RUU ROm, cid unlock then upgrade to 2.XX and then did the 3.0 upgrade and everything when well. I don't know why my 8125 after the 3.0 rom upgrade the OS still show 2.X I have done 2 upgrade and both was success all except my phone. Any help will be great. You peeps rock
Mine is doing the same thing
hksmr2 said:
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Click to expand...
Click to collapse
Did the Wizard reboot each time you ran the lokiwiz .2b?????
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
canadian student said:
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
Click to expand...
Click to collapse
Did you use the method in my sig? Please do it again, slowly, each step. I've personally unlocked around 60 G3 8125 and MDA's this way... never not it not work.
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
canadian student said:
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
Click to expand...
Click to collapse
If you got all the T-Mobile crap when you installed that 2.26 I'd think you were OK. For fun download the latest Faria ROM at ftp://xda:[email protected]/Wizard/Roms/faria-roms/ ... I'm running the 8MB as we speak.
Good luck!
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
canadian student said:
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
Click to expand...
Click to collapse
you're kidding, right?
I have never worked with RAR files before, i'm a total noob I know. When I click on it asks me what program do i want to open this up with.
I got it I got it, thank you very much.
Hi,
I have a Cingular 8125 phone, I upgraded it WM6 with one of the ROM that I downloaded from xda forums. I do NOT know which one that I downloaded. I remember downloading and installing one of the T-Mobile stuff, then flashing a new WM6 ROM from this forum. My phone locks up every time AFTER I receive/make a phone call. I would like to go back to stock WM5. I have no idea how this works, but it appears that I am running the risk of bricking my device if I do it wrong. Any help would be appreciated. Following is the details of what I have.
During BOOT it shows
T-Mobile Logo
IPL 3.08
SPL 3.08
GSM 2.25.11
OS 6.1.0.0
After boot,
About page says Windows Mobile 6.1 Professional
Device Information page says,
ROM Version: 6.1.0.0 WWE
ROM Date: 1/16/08
Radio Version: 2.25.11
Protocol Version 4.1.13.12
Thanks,
JSenthil
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Isn't that I first have to downgrade my SPL/IPL to 2.xx in order for the original WM5 to work on my G3 wizard?
Can you please explain the steps involved? BTW, where can I find the original ROM, are you referring to the one that can be downloaded from the HTC website?
Thank you for your help,
JSenthil
Unfortunately I installed iPhone skin onto my Cingular 8125. I would like to revert process and get back my WM5, but I tried "hard reset" (Comm Mng + Voice buttons and poke reset with stylus) and nothing. Keeps going back to the iPhone skin. Few things do not work, still has scroll bar on side, connection and battery icons and no lock mode. Contact list feels like iPhone, but is not well developed, still has bugs and menus to la-la land.
Please help, I don't know much about WM5 or cell phones.
Thanks!
rapanui
ricomilion said:
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Click to expand...
Click to collapse
ricomilion,
Could you hook me up with the Cingular/At&t original WM5 ROM?
Thanks,
daveetrice
Yes, id like the cingular wm5 stock rom as well if possible...im having problems after "upgrading" to wm6 too.
WM6
Can someone help for locate the WM6 ROM for the 8125 also WM5 so I can scale back if 6 hoses up my phone? Thanks.
Maybe my ROM's would work for you guys
Cingular Official stock wm5 Rom :-
http://www.htcamerica.net/support/8125/software-downloads.html
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe