Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Is my fone a lemon? I did the upgrade to WM 5 Crossbow 3.0 upgrade for my friend 8125, downgrade it to 1.1 RUU ROm, cid unlock then upgrade to 2.XX and then did the 3.0 upgrade and everything when well. I don't know why my 8125 after the 3.0 rom upgrade the OS still show 2.X I have done 2 upgrade and both was success all except my phone. Any help will be great. You peeps rock
Mine is doing the same thing
hksmr2 said:
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Click to expand...
Click to collapse
Did the Wizard reboot each time you ran the lokiwiz .2b?????
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
canadian student said:
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
Click to expand...
Click to collapse
Did you use the method in my sig? Please do it again, slowly, each step. I've personally unlocked around 60 G3 8125 and MDA's this way... never not it not work.
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
canadian student said:
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
Click to expand...
Click to collapse
If you got all the T-Mobile crap when you installed that 2.26 I'd think you were OK. For fun download the latest Faria ROM at ftp://xda:[email protected]/Wizard/Roms/faria-roms/ ... I'm running the 8MB as we speak.
Good luck!
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
canadian student said:
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
Click to expand...
Click to collapse
you're kidding, right?
I have never worked with RAR files before, i'm a total noob I know. When I click on it asks me what program do i want to open this up with.
I got it I got it, thank you very much.
Related
Can someone help me to downgrade from this rom.
I would like to put back my original one.
I already tried and I didn't managed. I have a Qtek 9100 so normaly it is unlocked.
When I tried to downgrade a got a message 296 saying that the rom is not usuable for my device.
Can someone give me the correct procedure to downgrade..
Downgrade to Button's 1.05 available Here !
Then you can "upgrade" it back to the shipped version.
Good luck!
thanks a lot.
It's worked
WOW! Quick like the bunny!
Same problem
Hi,
I have the same wish (re-install the original rom).
Like you indicate, I've downgrade... but now I can't upgrade to the original rom (i try with this one and this one)...)
Have you any idea ?
Thank a lot.
Loïc.
Resolved
Thank to Chris...
He help me in PM and I've resolved my problem...
Loïc.
link not working
Dr Puttingham said:
Downgrade to Button's 1.05 available Here !
Then you can "upgrade" it back to the shipped version.
Good luck!
Click to expand...
Click to collapse
Het the link is not working!!!!
Try this ... ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
trying to upgrade to the new t-mobile (2.26.10.2) rom
can anyone help me, i currently have mr clean installed but i cannot update to the new t-mobile rom?
what do i need to do?
Still looking for button 1.05
That link doesnt work either. I have looked all over this site for this button 1.05 and I always get this Error 550 Failed to change directory message...
Its 6 in the morning for me now in paris. I give up for now. But I have crashed my spv 3000 trying to downgrade it with a link somebody gave at some point on this site. I think I can just put back the 2.17 IPL and SPl Roms I have. But its a real bother. Anyone can help, so I can do this CID unlock., and then and only then pgrade my rom...
Paul Bourbon said:
That link doesnt work either. I have looked all over this site for this button 1.05 and I always get this Error 550 Failed to change directory message...
Its 6 in the morning for me now in paris. I give up for now. But I have crashed my spv 3000 trying to downgrade it with a link somebody gave at some point on this site. I think I can just put back the 2.17 IPL and SPl Roms I have. But its a real bother. Anyone can help, so I can do this CID unlock., and then and only then pgrade my rom...
Click to expand...
Click to collapse
That file you were given is good. ROM files are no longer posted here per M$'s request.
Typically when the install "hangs" it due to a problem with the PC, spyware would be my first guess. Also it's amazing what deleting your Windows temp files and running a CHKDSK /F can do. Try with another PC.
btw, there's a couple of good tutorials that deal with unlocking G3 devices ..
Good luck.
I just upgraded to the cing aku2.3.
I originally had the imate kjam 2.16.9.
Now my device is showing...
rom version:2.16.9.1 wwe
rom date:2/6/06
radio version:02.25.11
protocol version:4.1.13.12
ext rom version:2.25.11.102
Now it appears to me that I really haven't upgraded my rom, while everything else has changed.
What in the world did i do wrong? I simply did the sim unlock and cid unlock and the used the aku 2.3 installer program, and chose the number one selection which included the bootloader.
What am I missing?
Has anyone seen this issue before?
What can I do to resolve the issue?
I apologize for the newbie questions....
i encountered the exact same thing, i just switched back to the moslki 2.26 rom, no big deal to me
@ironbear - I'm afraid you never actually upgraded your phone. If those little numbers don't change then it's no go....
I keep meaning to make this part of my signature ...
http://forum.xda-developers.com/viewtopic.php?t=47848
Good luck!
and that is why i went back to my favorite Molski 2.26 rom
Well...
I thought I had unlocked my CID several times before. I got the same message and result as I did when I used Faria's tutorial this last time. And low and behold it WORKED!
I successfully upgraded everything now thanks to that tutorial. I guess starting from scratch in essence did the trick!
Thanks everyone for your help!
i had done the unlock along time ago.. but still my device never upgraded to 2.3... oh well, the molski rom kicks a$$
hi all
i tried to download the file ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe from the unlockung topic then it failed
seems to be removed
somebody have please upload it on any server except rapidshare
like : http://www.quicksharing.com/
or http://www.up4world.com/
my device now unusefull , so please help me
thanx in advanced
http://download.yousendit.com/FF900F2908E9D05B
Thanks for the info.
Hi there everyone
Greetings from Paris
I encountered the same problem. The file was not there anylonger. Then I saw this post, and its reply. I downloaded the file on http://download.yousendit.com/FF900F2908E9D05B which worked fine.
I ran the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file.
So far so good, and then the process crashed at 98%. Something about a file in outlook. I started the whole process again, and now it just stalls at 98%. No error message. NOthing. Anybody have any idea what I should do now...
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Paul Bourbon said:
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Click to expand...
Click to collapse
I never have to downgrade before I do the CID unlocked. I've tried with two MDA and never encountered any problem. You will only need to downgrade if you CANNOT CID unlocked; otherwise, don't bother to downgrade.
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
When downgrading with this ROM...it will stall at 98% for a few minutes...be patient. To confirm that the ROM I posted was legit...I used it again myself and worked fine. Then to make sure it wasn't just me...I had 2 other people tell me they used it and worked fine for them as well.
Don't know what to tell you as this is the ROM that was hosted on the FTP site for a long time.
shell tool
If your having trouble flashing a rom the shell tool posted on the g4 threads lets you flash any rom you wish onto your phone i have a g4 cid locked and using the tool i can swap my roms every day if i wished to with no hassle
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip
Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
Get yourself a signature. Is your Wizard G3 or G4.
I think that my wizard is a G3. I just added my signature.
Still looking for the mysterious file that apparently is no longer posted on this site.
thanks for any info.
i need a rapdishare or megauploads link to where i can download a 1.xx ROM for my G3 Qtek 9100 (Tmobile with imate 2.21 ROM).
I want to upgrade to wm6 and need to have a backup plan if it fails
10x in advance.
j3d1n4s7y said:
http://download.yousendit.com/FF900F2908E9D05B
Click to expand...
Click to collapse
thanx for uploading , but sorry this server blocked on our country
if any one can upload it again on the servers which i linked on the first post
thanx in advanced
looking for BUtton 1.05
this rom is not working for me. I stalls at about 98% of the process, and dies...
If you decide to do it, make sure you have a back up option.
Do a search on PirateBay for it. Its seeded...
i found the file
thanx for all
my device unlocked
I have WM6 TNT professinal + HTC home on my 8125 and have to send it back to cingular for warranty. I need to find the WM5 rom that came on the phone originally. Can anyone help me please?
Click below, this will restore your factory software
http://www.htcamerica.net/support/8125/software-downloads.html
Thank you for your help. It is greatly appreciated
Cing 8125 said:
Click below, this will restore your factory software
http://www.htcamerica.net/support/8125/software-downloads.html
Click to expand...
Click to collapse
Carefull this one is for G3 only and will brick a g4.
What if you have a G4, is there a ROM for that somewhere as well?
This can be used on a G4, since it has SPL/IPL for both. I know, as I use it every time I need to flash with shelltool.
Ah, well that makes sense. I thought it was pretty odd that the official ROM flasher would have a brick risk and not warn you about it ;P
I too...help me!
Drear mod,
Can you give for me one other line?Because too i am need it, my phone died at boot loader,and hardreset is " format fault". Help me!
Regard.
Hi,
I have a Cingular 8125 phone, I upgraded it WM6 with one of the ROM that I downloaded from xda forums. I do NOT know which one that I downloaded. I remember downloading and installing one of the T-Mobile stuff, then flashing a new WM6 ROM from this forum. My phone locks up every time AFTER I receive/make a phone call. I would like to go back to stock WM5. I have no idea how this works, but it appears that I am running the risk of bricking my device if I do it wrong. Any help would be appreciated. Following is the details of what I have.
During BOOT it shows
T-Mobile Logo
IPL 3.08
SPL 3.08
GSM 2.25.11
OS 6.1.0.0
After boot,
About page says Windows Mobile 6.1 Professional
Device Information page says,
ROM Version: 6.1.0.0 WWE
ROM Date: 1/16/08
Radio Version: 2.25.11
Protocol Version 4.1.13.12
Thanks,
JSenthil
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Isn't that I first have to downgrade my SPL/IPL to 2.xx in order for the original WM5 to work on my G3 wizard?
Can you please explain the steps involved? BTW, where can I find the original ROM, are you referring to the one that can be downloaded from the HTC website?
Thank you for your help,
JSenthil
Unfortunately I installed iPhone skin onto my Cingular 8125. I would like to revert process and get back my WM5, but I tried "hard reset" (Comm Mng + Voice buttons and poke reset with stylus) and nothing. Keeps going back to the iPhone skin. Few things do not work, still has scroll bar on side, connection and battery icons and no lock mode. Contact list feels like iPhone, but is not well developed, still has bugs and menus to la-la land.
Please help, I don't know much about WM5 or cell phones.
Thanks!
rapanui
ricomilion said:
no problem, just flash he original rom.
I have it, from mda t-mobile.
I think i have from cingular to, if you need it, let me know.
Click to expand...
Click to collapse
ricomilion,
Could you hook me up with the Cingular/At&t original WM5 ROM?
Thanks,
daveetrice
Yes, id like the cingular wm5 stock rom as well if possible...im having problems after "upgrading" to wm6 too.
WM6
Can someone help for locate the WM6 ROM for the 8125 also WM5 so I can scale back if 6 hoses up my phone? Thanks.
Maybe my ROM's would work for you guys
Cingular Official stock wm5 Rom :-
http://www.htcamerica.net/support/8125/software-downloads.html
http://download.america.htc.com/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe