Related
Hello folks,
Today I flashed with the ROM in thread 'T-Mobile USA 2.17 ROM (Custom)'. After it came up, I ran through the screen align and wizard. When it was all done installing extended rom etc it restarted on its own. After booting back up, everthing was really slow and there was no cell signal. The battery icon had an ! mark on it and when clicked, it says unknown battery. At this point everything keeps freezing and genrally not working including no activesync connection possible. I restarted into the bootloader and tried to flash again. It completed, but now I just get the tmobile boot screen, and eventually it restarts again, never completing the boot. This is when I notice that it doesnt seem to have a radio rom (GSM) version listed, but rather a gap where it should be. I ended up pulling the battery out and trying to get back into the boot loader again, and now I cant get it to power on in any way.
I guess that is enough said. The only other thing to note is that everything was working fine prior to the attempted update, I was merely hoping to get a performance boost, as I was using the original rom.
Any thoughts?
Thanks!
B. Ramsey
Fixed!
No other ROM would install, but in reading back through threads, I found a link to RUU_Prodigy_1081002_108_10910_TMO_US.exe. After installing this, I had my GSM rom back. Then everything worked. I think the not powering on issue had to do with the fact that it sat in the bootloader screen for several hours at one point. Since there was no standby, the battery was wasted. I am attempting to reflash it now to 2.17, we'll see.
No dice
After installing the 2.17 ROM, no more GSM, and same problems. I reflashed back to the previous and it works again..
Re: Fixed!
pterodyne said:
No other ROM would install, but in reading back through threads, I found a link to RUU_Prodigy_1081002_108_10910_TMO_US.exe. After installing this, I had my GSM rom back. Then everything worked. I think the not powering on issue had to do with the fact that it sat in the bootloader screen for several hours at one point. Since there was no standby, the battery was wasted. I am attempting to reflash it now to 2.17, we'll see.
Click to expand...
Click to collapse
THANK YOU SO MUCH for posting this! I also had a brick because of the same setup - trying to use the custom TMOBILE ROM. I had the same symptoms you did - basically non-responsive and no radio stack and no USB connection. I was not getting anywhere with any other ROM. Now, at least I have a working device.
Still no AKU2 though
Let me know if you manage to get an AKU2 ROM on your device!
That's worrisome. Do you know if the CID unlock was successful? (I think it's scripted into that custom upgrader)
If you're feeling adventurous, you could try intalling the custom 2.17 Cingular upgrader I made (it's on the FTP server). If that's successful, then the problem is with the T-MO upgrader. Based on all the folks having success with that T-MO upgrader though, I imagine the only issue might be a corrupt download. If the Cingular upgrader results in the same behavior, then the problem is either with the CID lock or some odd hardware problem.
I'm truly perplexed by the issue you're having..sure wish I knew how to help ya.
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
pterodyne said:
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
Click to expand...
Click to collapse
My device is a QTEK 9100. I was upgrading from the ROM on my device when I got it:
ROM 1.1.7.5 9/22/2005
Radio: 01.01.10
Protocol: 4.0.13.16
ExtROM: 1.1.7.105
My carrier is TMobile, so I figured the TMobile custom rom that was built off of the latest QTEK would be a good bet for me - but instead I ended up with no Radio.
I have the IMATE ROM you refer to - maybe I'll try to go to that as an interim step to get to the QTEK ROM I really want, since you had success with that method.
What I don't understand is why the Vanilla QTEK 2.17 (which is what I tried after the TMO Custom 2.17) gave me problems. I don't recall the exact error message, but basically it said it couldn't use that ROM on my device.
pterodyne said:
Thanks for the replies. My phone was already unlocked as it was purchased that way. I actually did get custom 2.17 tmo Rom to work, I just hadnt posted here yet. After flashing to the older rom, I flashed to the 2.16 Rom on clubimate.com. Then I had a working 2.16 with GSM. I figured what the hey and went ahead and tried the custom 2.17 Rom again. All is great, and FAST. I wish I could remember what custom Rom I was using before I think it must be the culprit. I cant remember, but it did have the extended rom free and open, total commander, and an unlocker.
Thanks
Click to expand...
Click to collapse
When you say it was already unlocked, don't you mean SIM unlocked? It would be unusual to buy a phone that is already CID unlocked.
I bought the unbranded k-jam from Simoncells.com. All I did was put my tmobile sim card in it and it worked. I guess I dont know the difference between SIM and CID unlocking.
Well theb that's where you went wrong, sim unlock refers to ur phone being able to use any world sim card...cid unlock refers to country Identification...if ur fone is not cid unlocked then wen u install foreign roms it will bugg up ur fone...dats wat happened to u and that other fellow pterodyne...I sim and cid unlocked my fone. ran the tmo 2.17 custom rom without a problem....plz do ur research on upgrading roms b4 u bash them...most factory fones don't come cid unlocked so I'd b surprised if urs did (tho it prolly came sim unlocked)...
I did an upgrade for my wizard and yes the CID was unlocked on my phone before going for my second upgrade...
[big edit]
Something went wrong, the updater attempted a second update which succeeded....
I only have these questions:
- Will the phone be working 100% or will I have some hik-ups because of the error I got during upgrading and then re-upgrading it again…?
- Did some of you had an error during an upgrade?
I can edit also!
Thank you
@Dr Puttingham
The topic start was indeed to descriptive, but it was something I needed to get off my chest albeit executed in a very poor way.
My sincerest apologies for that.
Very first time I ever tried to flash the ROM in my 8125 (was up to the latest Cingular release), it errored out on me. Didn't have any problems after doing it again.
Since then, I've CID unlocked and flashed to several different ROM's, right now running one of Summiters ROM's..
@sk0t
Thank you, good to know that future upgrading went without problems.
So far it has. And I've done a weird path of upgrading and downgrading and such.
Started @ 1.8. Upgraded to 2.5. Downgraded back to 1.8 (SPL stayed at 2.25). CID unlocked phone. Upgraded to 2.17. Now running a Summiter 2.3 (I think) ROM w/ the radio from 2.17.
So far so good.. I also keep wiping my extended ROM clean using Summiter's multi-installer. I find it's easier just to get rid of the damn thing. And if I really need something from the extended ROM, I just go nab an extracted one from the FTP.
dragonetti said:
@Dr Puttingham
The topic start was indeed to descriptive, but it was something I needed to get off my chest albeit executed in a very poor way.
My sincerest apologies for that.
Click to expand...
Click to collapse
Thank you for the big edits. As for your question, agreeing with sk0t, things should be better. I've felt it necessary to reflash a couple of phones a couple of times before I felt that they took the update. I've rebuilt many phones many times and have have learned to watch the IPL/SPL closely. If you really want to make sure that you're fully unlocked and upgraded, downgrade to the early Button 1.05 and then back to your 2.x watching your IPL /SPL.
Glad you got that off your chest btw, must have been a *****!
@Dr. Puttingham
Thank you for the extra info, I will do a re-flash in the near future while keeping my eyes on the IPL/SPL. (and thanks for your edit )
I also want to downgrade. I now have "Mr. Clean" AKU 2.3 ROM installed. I only have problems with it. So you suggest to go back to 1.05 or 1.08 and then to 2.21?
I have read that this maybe can brick your device. I have a mda vario.
(I already have tried to downgrade to the dutch t-mobile rom 2.21 directly. The setup fails when it restarts my vario, nothing serious. It's already CID unlocked.)
Ok I purchased a new Cingular 8125. It is a G3 Version. It was purchased with these settings
Original
Ipl 1.08
Spl 1.08
GSM 01.09.11
OS 1.8.11.1
New
Currently I Upgraded it to the HTC Release ROM from
HTC's website Settings now are
Ipl 2.25
Spl 2.25
GSM 02.25.11
OS 2.25.11.1
I want to use Risi's new 2.26 Rom but I can't CID/UNLOCK my phone. I noticed that there are MANY others here with the SAME problem.
I'm Begging for some assistance.
We need
1. Instructions on how to Downgrade to 1.8.11.1 so that we can use LOKIWIZ to unlock it. Thereby enabling us to use cooked up roms.
Been looking all over for the programs that are needed to do this. And I'm just as lost as ever. I definately do not want to brick my 8125 but I'm out of options.
http://forum.xda-developers.com/showthread.php?t=263116
Forget the warning at the top, I just used this method and on my new 8125 with the same firmware you are running and it worked fine. Take your time and follow directions. If you are not absolutly sure after reading the instructions stop and forget it. Download all the tools you need and do a dry run in your head.
Oh, I just found all this information a couple days ago by searching and spending time on the forum reading.
thanks man. im doing it right now the downgrading process hopefull it works. pray for me. if it does work ill have your children, build a shrine in our honor, and send 5 strippers to your house. if it fails i shall smite thee to hell on earth and take your first born.
well ive tried everything man. I went BACK to that old rom. Did the CIDunlock deal it apparently worked. But Nothing else does. It goes back to the old 1.xx rom then i made the mistake of upgrading to risis rom immediately. that didnt work. kept everything the same but installed the EXT rom. so i went BACK to the 1.xx rom unlocked again and then installed the 2.17 shipping rom. It instaleld but the OS stayed stuck at 1.xx. I ran risi and it only installed the ext rom again. I'm beginning to think my device can never support any cooked up roms and have given up. I'm installing the HTC shipped 2.25 rom now and hope that everythings all good and gravy again and all my numbers match up again. Hopefull this will be the case.
DUE to the first thread been turned into another unlocking one I had no choice but, to close the project.
But I feel that it is unfair to the people that respect my work an appreciate it.
The response to the rom has been overwhelming!!!! I never see this kind of response to a rom since the blue angel days
once again this thread been trashed with crap.rom is no longer available.next realease is pending.got better things to do with my time.plus time job is takeing most of mine time now and with x-mas coming,gonna get worst. when im ready i will contact the testers.no more tester are neede at the moment.
if you experience power-ups with push email folow.this;
now for users that have the device powering up when push email activated,i have been doing some testing;
i setup my push email [web2mail]
now i have setup the device security with a password,so when it comes from stand-by,will ask for it,
then a setup devicee lock in batterie status to also lock the device [see pictures]
what can i say i works fine.
when i receive an email from my server ,it notefys-me with the email sound ,but the device does not power up as reported.
now when the device lock time out is up,the device wakes up to lock itself
and the powers down in 1-2 seconds -this is normal in this rom atleast.
how to the date in the top right corner ?
use registry wizard[included in the rom] to remove the date or time
to use default clic sound download the file below
remove the .zip from the file name as it's just a cab...thanks dr.p
whats is in my rom?
unlcoking problem
people don't get it and it is really easy to unlock CID if they really follow the threads that there are. This thread says it clearly what u do and it is really easy to do it. Most of the people have update tool problem they can solve that with wizard_ROM update utility_noID file on the FTP site of the XDA. They can just put it to the unpcaked faria RC1 file and run it after unlocking CID. Two steps simple and cristle clear !!
http://forum.xda-developers.com/showthread.php?t=263116&highlight=CID+UNLOCK
/APPLAUDE
Just wanted to thank you for everything so far. Loving the ROM and will continue to provide Beta feedback as much as possible.
hey faria, awsome job i wish i had half your skills. your latest rom has been exeptional, the only issue i had was when i overclocked it the screen would intemitently turn on, oh and the battery meter never went below 57%. any help or sugestions would me much appreciated.
bigdooky said:
hey faria, awsome job i wish i had half your skills. your latest rom has been exeptional, the only issue i had was when i overclocked it the screen would intemitently turn on, oh and the battery meter never went below 57%. any help or sugestions would me much appreciated.
Click to expand...
Click to collapse
how much did you overclocked?
LOL!!!
faria said:
You my requested the rom from me but I will select you according to your posts.
Click to expand...
Click to collapse
LOL! So you will select us according to whether or not we have something intelligent to say. Well, I am about to put your 8mb rom on my MDA (right now using the RISIDRO rom loaded on top of the t-mobile official 2.26 rom) and will let you know what I think. I will be sure to say something smart. I will just blow you away with my intelligence and technical prowess.
I would like to see some articles on the page-pool size thing though. That's a new one to me. Check my post in the original thread (#419). Anyone wanna point me in the right direction? I can only find how-to's and not any reasons as to why one would do this...
So uh ... how do I unlock my phone? I did not get any keys. Are they on the stylus somewhere? I gotta go download a computer.
Portuguese Support
I faria since i`m new in this all new stuff of cooked rooms and extended roms etc; all that i can do is asking how can i help you on your journey, just tell me how i can donate you something for you to continue the great job that i have the oportunity to see in this forum i will be pleased to help with anythig to honor your Portuguese contribute to the XDA, continua o bom trabalho e ficarei a aguardar pelo "lançamento" da tua nova room EXCELENTE TRABALHO.
well I told you I would let you all know if there was a difference that I noticed between the 8mb and 12 mb with the voicemail issues and in-call issues.
with the 12, sometimes in a call, buttons would become usless and had to soft reset to hang up. same thing with the 8.
with the 12, voicemail icon would not go away after voice mail deleted. havnt seen that with the 8 yet.
other than that, speed is good in both, and everything works like a charm.
Jeb
I hope your donations will provide you with at least the ability to take a night off and go to dinner or maybe get a massage to help you forget the newbie questions. I will be sending a donation as well. You have provided an outstanding ROM that has rivaled (and beaten) multi-m(b)illion dollar companies core and "upgrade" roms.
To all those that wish to ask newbie questions, leave faria's threads dedicated to the enhancement and ultimate release of one of the best ROMS for a PPC phone alone.
The least you could do is create your own thread and post your questions there.
I hope I may be considered for future testing granted my moderately new questions have not been classified as non rom related. If so, I will go study some more and apply to faria U at a later time
G4s and the ROMs
Faria, I think I am onto something here. From what I am reading in the posts, and from what you and I discussed the other day about my extended rom not loading correctly, I think and G4 with IPL/SPL ABOVE 2.17.0001 have a greater degree of security. Again, reading the posts in your other thread, it seems a handful of G4 owners could indeed install your rom fully, while the other half would only get the OS. Correct me if I am wrong, but I am starting to see a pattern.
First and foremost I would like to thank Jose for all the time and effort that he put into making this great rom. If and when you come to NYC I am taking you out and getting you twisted VIP style! But enough ass kissing and lets get to bussiness.
I have had very minor issues.
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
After installing all the software extras that was included to check how they worked, I have not been able to keep the phone off. When I say off I mean the backlight staying off when nothing is running. I have tried using the XP feature to turn the light off but it doesnt keep it off either. This could be something that I did so I may just reflash and install everything one by one to see where the problem comes from.
I also have noticed some signal problems but I think that was more of me installing those cabs from the 2.26 rom
Any help is appreciated.
one issue i have noticed is right before the device wakes up it white screens for 2-3 seconds then loads the today screen.. i dont know if this is a issue as i have not seen it really affect anything but i figured id let u know.
peraltah said:
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
Any help is appreciated.
Click to expand...
Click to collapse
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Hello faria. I said eariler that this was a great rom. I think i have found a minor annoyance, i wouldn't call it a bug. It is related to spb time at least I'm pretty sure it is. I get the calnot.exe error every now and again and the cannot locate the spbtime.exe on reset. Its strange everything still works as it should. I think someone else had this problem in the other thread. I thought is was because spb time was loaded on the mem card and the fact that windows is sometimes late in loading it. So my next step was to move it to the sys mem. Same problem, I guessing it is on spb to fix this. I was probably not designed to work well with aku 3.2. Other than I that i could not find any real problems, except one time i uninstalled spb time and i oculd no longer sync. easliy fixed by hard reset no prob. I'm using 12mb pool. I also used your registry tweak program and set all the cache to the highest settings. Do you think that is a bad idea for this pool size. Have noticed some slow down in performance i don't know if the two are related.
thanks for the great rom again man!!
appreciated
jacob-mda said:
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Click to expand...
Click to collapse
I didnt delte it I just ran the other cabs from 2.26 and soft rest it. I think thats where my signal problem came from. I have to reboot to get my signal back.
monadzback said:
well I told you I would let you all know if there was a difference that I noticed between the 8mb and 12 mb with the voicemail issues and in-call issues.
with the 12, sometimes in a call, buttons would become usless and had to soft reset to hang up. same thing with the 8.
with the 12, voicemail icon would not go away after voice mail deleted. havnt seen that with the 8 yet.
other than that, speed is good in both, and everything works like a charm.
Jeb
Click to expand...
Click to collapse
i see a patern emeging here the voice mail/phone buttons seems to be an american thing.now i tryng to find out if its a carrier specific thing.
cptcafne
Faria, I think I am onto something here. From what I am reading in the posts, and from what you and I discussed the other day about my extended rom not loading correctly, I think and G4 with IPL/SPL ABOVE 2.17.0001 have a greater degree of security. Again, reading the posts in your other thread, it seems a handful of G4 owners could indeed install your rom fully, while the other half would only get the OS. Correct me if I am wrong, but I am starting to see a pattern.
Click to expand...
Click to collapse
please contact-me privite go somethig for you .
Timbo_fdw
Hello faria. I said eariler that this was a great rom. I think i have found a minor annoyance, i wouldn't call it a bug. It is related to spb time at least I'm pretty sure it is. I get the calnot.exe error every now and again and the cannot locate the spbtime.exe on reset. Its strange everything still works as it should. I think someone else had this problem in the other thread. I thought is was because spb time was loaded on the mem card and the fact that windows is sometimes late in loading it. So my next step was to move it to the sys mem. Same problem, I guessing it is on spb to fix this. I was probably not designed to work well with aku 3.2. Other than I that i could not find any real problems, except one time i uninstalled spb time and i oculd no longer sync. easliy fixed by hard reset no prob. I'm using 12mb pool. I also used your registry tweak program and set all the cache to the highest settings. Do you think that is a bad idea for this pool size. Have noticed some slow down in performance i don't know if the two are related.
thanks for the great rom again man!!
Click to expand...
Click to collapse
that app has problems in 3.2 roms.
Originally Posted by peraltah
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
Any help is appreciated.
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Click to expand...
Click to collapse
please provide the rigth cab files for the next update.
dreamteam3x said:
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Click to expand...
Click to collapse
im afraid you phone still locked
now put it int bootloader mode and run the latest rom from your provider.
dreamteam3x said:
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Click to expand...
Click to collapse
when u downgrade then upgrade with a 2.26 ROM (IPL , SPL) like moliskis and then upgrade to farias and it will show u
IPL=2.26
SPL=2.26
OS=3.000
jacob-mda said:
one issue i have noticed is right before the device wakes up it white screens for 2-3 seconds then loads the today screen.. i dont know if this is a issue as i have not seen it really affect anything but i figured id let u know.
Click to expand...
Click to collapse
there is a fix for that in page 7-8 in the old thread
LOL! So you will select us according to whether or not we have something intelligent to say. Well, I am about to put your 8mb rom on my MDA (right now using the RISIDRO rom loaded on top of the t-mobile official 2.26 rom) and will let you know what I think. I will be sure to say something smart. I will just blow you away with my intelligence and technical prowess.
I would like to see some articles on the page-pool size thing though. That's a new one to me. Check my post in the original thread (#419). Anyone wanna point me in the right direction? I can only find how-to's and not any reasons as to why one would do this...
So uh ... how do I unlock my phone? I did not get any keys. Are they on the stylus somewhere? I gotta go download a computer.
Last edited by appye : Today at 10:45 PM. Reason: I am cool like that.
Click to expand...
Click to collapse
nice try.but no dice
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Is my fone a lemon? I did the upgrade to WM 5 Crossbow 3.0 upgrade for my friend 8125, downgrade it to 1.1 RUU ROm, cid unlock then upgrade to 2.XX and then did the 3.0 upgrade and everything when well. I don't know why my 8125 after the 3.0 rom upgrade the OS still show 2.X I have done 2 upgrade and both was success all except my phone. Any help will be great. You peeps rock
Mine is doing the same thing
hksmr2 said:
Folks,
Please help, I have a cingular 8125, it is CID Unlock, and I have upgrade it from Cingular OEM ROM to Molski 2.6 ROM, but now as I tried to upgrade it to AKU 3.3 with Crossbow icon ROM, the entire process goes through fine, but after the update the rom is still 2.6. Please help. I make sure to run the ENABLErapi but still no luck, OS is still showing up 2.26.10.2. I upgrade my friends MDA to the AKU 3.3 with no problem. Any advise. Thanks
By the way I also downgrade it to SPL 1.X and still with no luck in the upgrade.
Click to expand...
Click to collapse
Did the Wizard reboot each time you ran the lokiwiz .2b?????
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
canadian student said:
Yes it did, I knwo how sick you guys are of answering the same questions all the time, and I have searched for over 5 hours and I still can't get this thing to update. If you can help please?
Click to expand...
Click to collapse
Did you use the method in my sig? Please do it again, slowly, each step. I've personally unlocked around 60 G3 8125 and MDA's this way... never not it not work.
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
canadian student said:
I did read it, followed everything. I was able to upgrade it to the t-mob rom 2.26, I have a G3 8125. With the WM5 AKU3.3 file do i just run the updateutility from there and it should upgrade the rom? Or do I have to put one of thise files on my phone? Should I extract it? I'm not very good at this stuff as you can tell. If you can just tell me how to upgrade a cooked rom that will be so well appreciated.
Thanks for the quick responses also.
Click to expand...
Click to collapse
If you got all the T-Mobile crap when you installed that 2.26 I'd think you were OK. For fun download the latest Faria ROM at ftp://xda:[email protected]/Wizard/Roms/faria-roms/ ... I'm running the 8MB as we speak.
Good luck!
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
canadian student said:
Thanks for the link Now with this do i copy it to my device? I saved it, should I have just opened it? How do i install it now? Sorry if I'm being a pain, I just really want to get this working. Thanks
Click to expand...
Click to collapse
you're kidding, right?
I have never worked with RAR files before, i'm a total noob I know. When I click on it asks me what program do i want to open this up with.
I got it I got it, thank you very much.