Related
I just upgraded to the cing aku2.3.
I originally had the imate kjam 2.16.9.
Now my device is showing...
rom version:2.16.9.1 wwe
rom date:2/6/06
radio version:02.25.11
protocol version:4.1.13.12
ext rom version:2.25.11.102
Now it appears to me that I really haven't upgraded my rom, while everything else has changed.
What in the world did i do wrong? I simply did the sim unlock and cid unlock and the used the aku 2.3 installer program, and chose the number one selection which included the bootloader.
What am I missing?
Has anyone seen this issue before?
What can I do to resolve the issue?
I apologize for the newbie questions....
i encountered the exact same thing, i just switched back to the moslki 2.26 rom, no big deal to me
@ironbear - I'm afraid you never actually upgraded your phone. If those little numbers don't change then it's no go....
I keep meaning to make this part of my signature ...
http://forum.xda-developers.com/viewtopic.php?t=47848
Good luck!
and that is why i went back to my favorite Molski 2.26 rom
Well...
I thought I had unlocked my CID several times before. I got the same message and result as I did when I used Faria's tutorial this last time. And low and behold it WORKED!
I successfully upgraded everything now thanks to that tutorial. I guess starting from scratch in essence did the trick!
Thanks everyone for your help!
i had done the unlock along time ago.. but still my device never upgraded to 2.3... oh well, the molski rom kicks a$$
Ok I purchased a new Cingular 8125. It is a G3 Version. It was purchased with these settings
Original
Ipl 1.08
Spl 1.08
GSM 01.09.11
OS 1.8.11.1
New
Currently I Upgraded it to the HTC Release ROM from
HTC's website Settings now are
Ipl 2.25
Spl 2.25
GSM 02.25.11
OS 2.25.11.1
I want to use Risi's new 2.26 Rom but I can't CID/UNLOCK my phone. I noticed that there are MANY others here with the SAME problem.
I'm Begging for some assistance.
We need
1. Instructions on how to Downgrade to 1.8.11.1 so that we can use LOKIWIZ to unlock it. Thereby enabling us to use cooked up roms.
Been looking all over for the programs that are needed to do this. And I'm just as lost as ever. I definately do not want to brick my 8125 but I'm out of options.
http://forum.xda-developers.com/showthread.php?t=263116
Forget the warning at the top, I just used this method and on my new 8125 with the same firmware you are running and it worked fine. Take your time and follow directions. If you are not absolutly sure after reading the instructions stop and forget it. Download all the tools you need and do a dry run in your head.
Oh, I just found all this information a couple days ago by searching and spending time on the forum reading.
thanks man. im doing it right now the downgrading process hopefull it works. pray for me. if it does work ill have your children, build a shrine in our honor, and send 5 strippers to your house. if it fails i shall smite thee to hell on earth and take your first born.
well ive tried everything man. I went BACK to that old rom. Did the CIDunlock deal it apparently worked. But Nothing else does. It goes back to the old 1.xx rom then i made the mistake of upgrading to risis rom immediately. that didnt work. kept everything the same but installed the EXT rom. so i went BACK to the 1.xx rom unlocked again and then installed the 2.17 shipping rom. It instaleld but the OS stayed stuck at 1.xx. I ran risi and it only installed the ext rom again. I'm beginning to think my device can never support any cooked up roms and have given up. I'm installing the HTC shipped 2.25 rom now and hope that everythings all good and gravy again and all my numbers match up again. Hopefull this will be the case.
DUE to the first thread been turned into another unlocking one I had no choice but, to close the project.
But I feel that it is unfair to the people that respect my work an appreciate it.
The response to the rom has been overwhelming!!!! I never see this kind of response to a rom since the blue angel days
once again this thread been trashed with crap.rom is no longer available.next realease is pending.got better things to do with my time.plus time job is takeing most of mine time now and with x-mas coming,gonna get worst. when im ready i will contact the testers.no more tester are neede at the moment.
if you experience power-ups with push email folow.this;
now for users that have the device powering up when push email activated,i have been doing some testing;
i setup my push email [web2mail]
now i have setup the device security with a password,so when it comes from stand-by,will ask for it,
then a setup devicee lock in batterie status to also lock the device [see pictures]
what can i say i works fine.
when i receive an email from my server ,it notefys-me with the email sound ,but the device does not power up as reported.
now when the device lock time out is up,the device wakes up to lock itself
and the powers down in 1-2 seconds -this is normal in this rom atleast.
how to the date in the top right corner ?
use registry wizard[included in the rom] to remove the date or time
to use default clic sound download the file below
remove the .zip from the file name as it's just a cab...thanks dr.p
whats is in my rom?
unlcoking problem
people don't get it and it is really easy to unlock CID if they really follow the threads that there are. This thread says it clearly what u do and it is really easy to do it. Most of the people have update tool problem they can solve that with wizard_ROM update utility_noID file on the FTP site of the XDA. They can just put it to the unpcaked faria RC1 file and run it after unlocking CID. Two steps simple and cristle clear !!
http://forum.xda-developers.com/showthread.php?t=263116&highlight=CID+UNLOCK
/APPLAUDE
Just wanted to thank you for everything so far. Loving the ROM and will continue to provide Beta feedback as much as possible.
hey faria, awsome job i wish i had half your skills. your latest rom has been exeptional, the only issue i had was when i overclocked it the screen would intemitently turn on, oh and the battery meter never went below 57%. any help or sugestions would me much appreciated.
bigdooky said:
hey faria, awsome job i wish i had half your skills. your latest rom has been exeptional, the only issue i had was when i overclocked it the screen would intemitently turn on, oh and the battery meter never went below 57%. any help or sugestions would me much appreciated.
Click to expand...
Click to collapse
how much did you overclocked?
LOL!!!
faria said:
You my requested the rom from me but I will select you according to your posts.
Click to expand...
Click to collapse
LOL! So you will select us according to whether or not we have something intelligent to say. Well, I am about to put your 8mb rom on my MDA (right now using the RISIDRO rom loaded on top of the t-mobile official 2.26 rom) and will let you know what I think. I will be sure to say something smart. I will just blow you away with my intelligence and technical prowess.
I would like to see some articles on the page-pool size thing though. That's a new one to me. Check my post in the original thread (#419). Anyone wanna point me in the right direction? I can only find how-to's and not any reasons as to why one would do this...
So uh ... how do I unlock my phone? I did not get any keys. Are they on the stylus somewhere? I gotta go download a computer.
Portuguese Support
I faria since i`m new in this all new stuff of cooked rooms and extended roms etc; all that i can do is asking how can i help you on your journey, just tell me how i can donate you something for you to continue the great job that i have the oportunity to see in this forum i will be pleased to help with anythig to honor your Portuguese contribute to the XDA, continua o bom trabalho e ficarei a aguardar pelo "lançamento" da tua nova room EXCELENTE TRABALHO.
well I told you I would let you all know if there was a difference that I noticed between the 8mb and 12 mb with the voicemail issues and in-call issues.
with the 12, sometimes in a call, buttons would become usless and had to soft reset to hang up. same thing with the 8.
with the 12, voicemail icon would not go away after voice mail deleted. havnt seen that with the 8 yet.
other than that, speed is good in both, and everything works like a charm.
Jeb
I hope your donations will provide you with at least the ability to take a night off and go to dinner or maybe get a massage to help you forget the newbie questions. I will be sending a donation as well. You have provided an outstanding ROM that has rivaled (and beaten) multi-m(b)illion dollar companies core and "upgrade" roms.
To all those that wish to ask newbie questions, leave faria's threads dedicated to the enhancement and ultimate release of one of the best ROMS for a PPC phone alone.
The least you could do is create your own thread and post your questions there.
I hope I may be considered for future testing granted my moderately new questions have not been classified as non rom related. If so, I will go study some more and apply to faria U at a later time
G4s and the ROMs
Faria, I think I am onto something here. From what I am reading in the posts, and from what you and I discussed the other day about my extended rom not loading correctly, I think and G4 with IPL/SPL ABOVE 2.17.0001 have a greater degree of security. Again, reading the posts in your other thread, it seems a handful of G4 owners could indeed install your rom fully, while the other half would only get the OS. Correct me if I am wrong, but I am starting to see a pattern.
First and foremost I would like to thank Jose for all the time and effort that he put into making this great rom. If and when you come to NYC I am taking you out and getting you twisted VIP style! But enough ass kissing and lets get to bussiness.
I have had very minor issues.
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
After installing all the software extras that was included to check how they worked, I have not been able to keep the phone off. When I say off I mean the backlight staying off when nothing is running. I have tried using the XP feature to turn the light off but it doesnt keep it off either. This could be something that I did so I may just reflash and install everything one by one to see where the problem comes from.
I also have noticed some signal problems but I think that was more of me installing those cabs from the 2.26 rom
Any help is appreciated.
one issue i have noticed is right before the device wakes up it white screens for 2-3 seconds then loads the today screen.. i dont know if this is a issue as i have not seen it really affect anything but i figured id let u know.
peraltah said:
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
Any help is appreciated.
Click to expand...
Click to collapse
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Hello faria. I said eariler that this was a great rom. I think i have found a minor annoyance, i wouldn't call it a bug. It is related to spb time at least I'm pretty sure it is. I get the calnot.exe error every now and again and the cannot locate the spbtime.exe on reset. Its strange everything still works as it should. I think someone else had this problem in the other thread. I thought is was because spb time was loaded on the mem card and the fact that windows is sometimes late in loading it. So my next step was to move it to the sys mem. Same problem, I guessing it is on spb to fix this. I was probably not designed to work well with aku 3.2. Other than I that i could not find any real problems, except one time i uninstalled spb time and i oculd no longer sync. easliy fixed by hard reset no prob. I'm using 12mb pool. I also used your registry tweak program and set all the cache to the highest settings. Do you think that is a bad idea for this pool size. Have noticed some slow down in performance i don't know if the two are related.
thanks for the great rom again man!!
appreciated
jacob-mda said:
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Click to expand...
Click to collapse
I didnt delte it I just ran the other cabs from 2.26 and soft rest it. I think thats where my signal problem came from. I have to reboot to get my signal back.
monadzback said:
well I told you I would let you all know if there was a difference that I noticed between the 8mb and 12 mb with the voicemail issues and in-call issues.
with the 12, sometimes in a call, buttons would become usless and had to soft reset to hang up. same thing with the 8.
with the 12, voicemail icon would not go away after voice mail deleted. havnt seen that with the 8 yet.
other than that, speed is good in both, and everything works like a charm.
Jeb
Click to expand...
Click to collapse
i see a patern emeging here the voice mail/phone buttons seems to be an american thing.now i tryng to find out if its a carrier specific thing.
cptcafne
Faria, I think I am onto something here. From what I am reading in the posts, and from what you and I discussed the other day about my extended rom not loading correctly, I think and G4 with IPL/SPL ABOVE 2.17.0001 have a greater degree of security. Again, reading the posts in your other thread, it seems a handful of G4 owners could indeed install your rom fully, while the other half would only get the OS. Correct me if I am wrong, but I am starting to see a pattern.
Click to expand...
Click to collapse
please contact-me privite go somethig for you .
Timbo_fdw
Hello faria. I said eariler that this was a great rom. I think i have found a minor annoyance, i wouldn't call it a bug. It is related to spb time at least I'm pretty sure it is. I get the calnot.exe error every now and again and the cannot locate the spbtime.exe on reset. Its strange everything still works as it should. I think someone else had this problem in the other thread. I thought is was because spb time was loaded on the mem card and the fact that windows is sometimes late in loading it. So my next step was to move it to the sys mem. Same problem, I guessing it is on spb to fix this. I was probably not designed to work well with aku 3.2. Other than I that i could not find any real problems, except one time i uninstalled spb time and i oculd no longer sync. easliy fixed by hard reset no prob. I'm using 12mb pool. I also used your registry tweak program and set all the cache to the highest settings. Do you think that is a bad idea for this pool size. Have noticed some slow down in performance i don't know if the two are related.
thanks for the great rom again man!!
Click to expand...
Click to collapse
that app has problems in 3.2 roms.
Originally Posted by peraltah
The mms did not work for me with the settings that I had from tmobile USA. I did get them to work when I got some of the settings cabs from the 2.26 custom extended rom. I did run the auto config that was included to set the network settings.
Any help is appreciated.
i also experienced this problem with MMS settings, what i did was delete the settings faria provided and ran a cab file once, soft reset then ran the cab file again and now my settings are there.
Click to expand...
Click to collapse
please provide the rigth cab files for the next update.
dreamteam3x said:
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Click to expand...
Click to collapse
im afraid you phone still locked
now put it int bootloader mode and run the latest rom from your provider.
dreamteam3x said:
Quote:
Originally Posted by dreamteam3x
Dear Faria and users,
Thank you Faria very much for your work on the new ROM, we all
highly appreciate that.I'm really confused about the
result on my Cingular 8125 after it's upgraded to your new ROM,
i mean your AKU 3.2 RC1.
Let me tell you the whole process that i followed to have a
better understanding:
1. ROM before upgrading:
-IPL 2.25
-SPL 2.25
-Radio 02.47...
-OS 2.26 (Shogun_A_La_Card's ROM)
2.What i see after upgrading to your new ROM:
-IPL 2.25
-SPL 2.25
-Radio 02.25.11
-OS 2.26.10.2
3.The proplem that i encountered:
when ROM upgrade finished, the device automatically
restarted and asked me if i wanna run the autorun files
(the installation of Ext_ROM, i know that) and i certainly choosed Yes.
The installation process went smoothly to its nearly end then a
error dialog box poped up with :"/Windows/autoconfig.exe doesnt exist"
,the only thing i could do is to choose "ok".The device restarted and
what i find after that is a new OS 2.26.10.2 without the EXt_ROM.
I downloaded both 8MB and 12MB pool versions but it gives me
the same result for both.
Please help me me on :
1.How to correct those problems.
2.How to upgrade my SPL and IPL to the newest versions?I stay the same(2.25) even when i upgraded the device to 2.26.
Thank you very much for any help.
Was your phone CID unlocked prior to the install? It seems that you have a G3 so the other thread on unlocking should have been done first. (You may have done this prior to another ROM but I am to tired to think about that...) Good luck!
--M
=============
Urgent helps needed!
So i bricked my Cingular 8125!
I just wanted to upgrade my ROM to the newest AKU 3.2 from Faria.
I did ungrade and errors arised as i described above.
I was told that the fone hadn't been CID unlocked.
I did as what described in lowikiz
-downgrade the rom,
-run enablerapi.cab on my device
-run lowikiz 0.2b
-choose CID unlock
Restarted the fone, what i saw was:
IPL 1.01
SPL 2.25
GSM 2.47.11
OS 3.0.0
There're only two things fulfill me,that's GSM and the OS.I wanted the
IPL and SPL should be 2.26 or later version.
What i did then :
-Downgrade again (hoping that i forgot to SIM unlock)
-run enablerapi on my device
-run lowikiz 0.2b
-choose unlock
And when the fone restart.
What i saw was:
IPL 1.01
SPL 1.01
GSM 1.x.x
OS 1.05.x
when the installation completed, i upgraded the ROM again to AKU3.2
everything went smoothly until it finished.The fone restarted and what i saw was:
IPL 1.01
SPL 1.01
<blank, no GSM version, couldnt believe that>
OS 3.0.0.0
the device kept running until the installation completed.
It restarted again and stopped running.What i can see now is just
nice background and blinking (waited for nearly 15 mins but no futher responses)
IPL 1.01
SPL 1.01
OS 3.0.0.0
It couldn't get further.
I think i bricked my Cingular 8125.
So could you helpers, experienced users help me with that?
Can i fix it?Or can HTC fix it?
Thank you very much!
Click to expand...
Click to collapse
when u downgrade then upgrade with a 2.26 ROM (IPL , SPL) like moliskis and then upgrade to farias and it will show u
IPL=2.26
SPL=2.26
OS=3.000
jacob-mda said:
one issue i have noticed is right before the device wakes up it white screens for 2-3 seconds then loads the today screen.. i dont know if this is a issue as i have not seen it really affect anything but i figured id let u know.
Click to expand...
Click to collapse
there is a fix for that in page 7-8 in the old thread
LOL! So you will select us according to whether or not we have something intelligent to say. Well, I am about to put your 8mb rom on my MDA (right now using the RISIDRO rom loaded on top of the t-mobile official 2.26 rom) and will let you know what I think. I will be sure to say something smart. I will just blow you away with my intelligence and technical prowess.
I would like to see some articles on the page-pool size thing though. That's a new one to me. Check my post in the original thread (#419). Anyone wanna point me in the right direction? I can only find how-to's and not any reasons as to why one would do this...
So uh ... how do I unlock my phone? I did not get any keys. Are they on the stylus somewhere? I gotta go download a computer.
Last edited by appye : Today at 10:45 PM. Reason: I am cool like that.
Click to expand...
Click to collapse
nice try.but no dice
Have a G3 unlocked Wizard (Cingular 8125).
Have been running different ROMS to see which one I like.
Recently stayed with NBD 8.0 for a while.
Last week battery went to heck, apparantly during a reflashing.
Probably due to the battery, I could never reflash and would always get
stuck in bootscreen @ 98%, no matter how long I charged the battery
(using stock charger and battery in-phone.)
I purchased a cradle battery charger and a new battery from ebay (which works great BTW).
Now I can flash... I think.
I managed to flash in "Xda_MiniS_LaunchROM_v154102" and my phone works.
I even got caught up on my voicemails. But every time I try to
upgrade to stock Cingular or T-Mobile, the RUU says incorrect ?nk.nbf? file.
(The actual ROM file).........What gives?
This is what comes up upon bootup.
ipl-1.01
spl-1.01
gsm-1.12.10.0
os-1.5.4.2
I'm using an XP machine with ActiveSync 4.5. Never had a problem
re-flashing before. I tried looking through the threads without success.
Any help would be appreciated.
i was going to say try that xda mini rom. thats what fixed my problem , then i was able to flash a tmobile rom. then tne wm6.
http://forum.xda-developers.com/showthread.php?t=298613 I used this thread. try the tmobile rom on g3.7
joihan777 said:
Have a G3 unlocked Wizard (Cingular 8125).
Have been running different ROMS to see which one I like.
Recently stayed with NBD 8.0 for a while.
Last week battery went to heck, apparantly during a reflashing.
Probably due to the battery, I could never reflash and would always get
stuck in bootscreen @ 98%, no matter how long I charged the battery
(using stock charger and battery in-phone.)
I purchased a cradle battery charger and a new battery from ebay (which works great BTW).
Now I can flash... I think.
I managed to flash in "Xda_MiniS_LaunchROM_v154102" and my phone works.
I even got caught up on my voicemails. But every time I try to
upgrade to stock Cingular or T-Mobile, the RUU says incorrect ?nk.nbf? file.
(The actual ROM file).........What gives?
This is what comes up upon bootup.
ipl-1.01
spl-1.01
gsm-1.12.10.0
os-1.5.4.2
I'm using an XP machine with ActiveSync 4.5. Never had a problem
re-flashing before. I tried looking through the threads without success.
Any help would be appreciated.
Click to expand...
Click to collapse
It may be the RUU you are using. Try flashing the Cingular rom using one of the RUUs I attached below. I personally have never had this problem before so this is my best suggestion.
Is it possible that somehow it got re-locked????
Also, evrytime I try to upgrade out of 1.05 ROM the RUU process stops at 85% and then says nk.nbf not for this PDA.
No, except you didn't have a successful CID-unlock (e.g. Unlock when IPL and SPL is 2.xx, and flashed to WM6 using ShellTool, then you think that you have been unlocked, which is actually not)
Update: Even though I haven't been able to load the official Cingular ROM or
the T-Mobile 2.26 ROM, I HAVE been successful in loading NBD 8.0.
I DON'T GET IT!!!!! Why would NBD load but official carrier ROMs get stuck at 85%?
Although my G3 is is currently working again, I'll still do some more experimenting.
I don't know what an extended ROM is, but I wonder if mine was corrupted
during the power failure when attempting to downgrade last week from NBD to Cingular?
I'll post my results hoping this will help others.
Edit: An hour later- I tried another official WM5 ROM form HTC, no dice. Froze @ 85%
just like the other WM5 Official ROMs. On a hunch, I tried to install the newest NBD 9.2.
IT WORKED! WHY can I install NBD ROMS but not Official WM5 ROMs?
Now the first splash screen is the *dated* green stepped graduated green from 1.05. The current info:
IPL- 2.25
SPL- 2.25
GSM- 02.25.11
OS- 6.0.0.0
Itai! This is tough!
EDIT: OK, it's now 4am and I'm seeing double....
Tried Wizard Service Tool, a very efficient program by mestrini.
Apparantly, my extended ROM was hidden. So the WST unhid it. Now we'll see what this does.
According to WST, there was no pagepool found in WM6 or WM5 location.
Could this be why WM5 updates didn't work?
4:22am, even cat gave up on me...
Sorry if I missed something here, but if you have a CID Unlocked phone and you downgrade back to a 1.xx IPL/SPL, then you will be CID Locked again when you upgrade. Anytime you downgrade to 1.xx you have to redo the CID Unlock process while you are down there before going back to IPL/SPL 2.xx or higher.
So redo going back to the Button rom, do the lokiwiz unlock, make sure both IPL/SPL are 1.xx (so you may have to flash button a couple of times) then upgrade to Cingular, T-Mo or whatever official 2.xx rom.
joihan777 said:
According to WST, there was no pagepool found in WM6 or WM5 location.
Could this be why WM5 updates didn't work?
4:22am, even cat gave up on me...
Click to expand...
Click to collapse
Page Pool is set in ROM image, not hard-coded in hardware.
mfrazzz said:
Sorry if I missed something here, but if you have a CID Unlocked phone and you downgrade back to a 1.xx IPL/SPL, then you will be CID Locked again when you upgrade. Anytime you downgrade to 1.xx you have to redo the CID Unlock process while you are down there before going back to IPL/SPL 2.xx or higher.
So redo going back to the Button rom, do the lokiwiz unlock, make sure both IPL/SPL are 1.xx (so you may have to flash button a couple of times) then upgrade to Cingular, T-Mo or whatever official 2.xx rom.
Click to expand...
Click to collapse
Didn't work. I'm certain I'm unlocked, both by lokiwiz program saying so and
Wizard Service Tool saying so. After the unlock I was successfully able to
load NBD 8.0 & NBD 9.2 ROMs, but not the official T-Mo/Cingular WM5 ROMs.
WST found the pagepool completely missing in both WM5 & WM6 sectors.
The extended ROM was also hidden. Both of those items have been corrected
so later today I'll redo the entire process just to make sure all is well.
starkwong said:
Page Pool is set in ROM image, not hard-coded in hardware.
Click to expand...
Click to collapse
Thanks. More clues to this puzzle!
Try flashing the empty extented rom. Most new roms don't have extended roms, so if your extended rom is corrupt it may be keeping wm5 to load. Which explains why NBD roms work.
goofeyass said:
Try flashing the empty extented rom. Most new roms don't have extended roms, so if your extended rom is corrupt it may be keeping wm5 to load. Which explains why NBD roms work.
Click to expand...
Click to collapse
Thanks, I just now tried this approach. I used mestrini's Wizard Service Tool to 'format' the extended rom. As of this moment I've just downgraded to Button 1.05 ROM and going to use lokiwiz's unlocker.
There is a rom out that will flash an empty extended rom without changing anything else.
http://forum.xda-developers.com/attachment.php?attachmentid=42076&d=1182515673
I have formatted the extended rom.
Then I tried to redo the Button-->Unlock-->T-Mo 2.26.
Still process stops at 85% when installing T-Mo ROM!!!
Also, the splash screen doesn't seem to be working?
goofeyass said:
There is a rom out that will flash an empty extended rom without changing anything else.
http://forum.xda-developers.com/attachment.php?attachmentid=42076&d=1182515673
Click to expand...
Click to collapse
How long are you waiting when its at 85%. I've had them stay at 85 % for over 5 minutes before.
I would recommend flashing ---->http://forum.xda-developers.com/attachment.php?attachmentid=42076&d=1182515673
???
in my opinion it is a waste of time to downgrade to flash a new/original rom...i've flashed about 100 or so roms since late 2005, multiple devices, jumping from carrier rom to latest wm5/6 builds..never had an error.
Do what you like of course, im just saying save 10 mins and flash straight to whatever you're wanting to try. goodluck and happy flashing
BTW like I said before... for those of you with dual/quad core procs, try putting the romupdateutility.exe on real-time priority and check it, I flash in roms in less than 3 mins, everytime, no errors
goofeyass said:
How long are you waiting when its at 85%. I've had them stay at 85 % for over 5 minutes before.
I would recommend flashing ---->http://forum.xda-developers.com/attachment.php?attachmentid=42076&d=1182515673
Click to expand...
Click to collapse
Is there a correct method for using those files? I installed them to the Wizard's Windows/ Startup directory & rebooted. They sorta ran, but when I checked the extended ROM with WST, it reported the extended ROM was empty =)
Now I'll go around again Button 1.04-->Lokiwiz Unlock-->T-Mo 2.26
goofeyass said:
How long are you waiting when its at 85%. I've had them stay at 85 % for over 5 minutes before.
Click to expand...
Click to collapse
Good point... HOW long are you waiting. If you are doing an RUU, you should just let it run. Official roms will "Hang" at 85%, and I've had them hang for over 5mins before also, but they always finish.
As someone used to post, you should start the RUu, then head to the kitchen, go get coffee, a snack, whatever. Just ignore the flashing process until its done...
mfrazzz said:
As someone used to post, you should start the RUu, then head to the kitchen, go get coffee, a snack, whatever. Just ignore the flashing process until its done...
Click to expand...
Click to collapse
Very well said. Lol. It's true though. If you just ignore it, it will seem to go faster. I noticed the same thing too. If you are flashing an official rom, it will almost always stop at 85%, sometimes for a long time... Just let it go and it should eventually finish.
Hello All Developers,
It's my 1st time yo post a new thread, well thats because i always found the answer in either the subject or the answers. Yet, for problem in hand, I cant find any thread with it included.
I bought a G3 Wizard, and I fell in love with it, this is not new, i fall in love with all my mobiles and PDAs.
I have a Himalaya too which is much more simple than Wizard regarding upgrading. and here we go
I followed the instructions in the sticky thread titled:
[READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
I found it very helpful. I followed mainly the FARIA version too, i was reading the 2 threads in parallel to double check my understanding.
it all went great .. till the IPL/SPL upgrade step, i followed my guess that i dont need to go though the 2.26 ROM to update afterwards to 3.08. so i upgraded to 3.08 and all went well.
the next was to upgrade to any WM6.1 versions. and for my sorrow, all of them failed to update.
the failure it self was a piece of art. after the completion of the update taking its 10 mins, it just hard reset my device. no new rom is installed.
my guess was, go back to 1.05 and go to 2.26 instead of 3.08
i did that and found my IPL/SPL changed from 3.08/3.08 to 1.01/3.08 even though the rom is supposed to have both of them equaling 1.05
ignoring this fact "an error i'll regret soon" i tried to upgrade to any WM6.1 ROM and voalla
I BRICKED MY BELOVED WIZARD.
yes thats right, it stuck at 98% and sowed a failure message. allowing me only to follow the recovery steps. and i got this 4 strips screen (i'm counting the white strip too)
any way, after trying with different roms, different uti upgrading file, all reached the point of failure.
so, i kinda lost hope, and removed the batt, the SIM and left the device like this for 4 hours or even more.
i returned from work, and prayed to god to help me. i cant live without my beloved Wizard.
and the only thing i could do was to try to install the button 1.05 rom again. i tried b4 the 4 hours break, and it failed just like the others.
i dont know how but while praying , the mobile continued to flash the rom and booted completely!!!
now, after this story, here is my current status,
IPL/SPL = 1.01/3.08
ROM : button 1.05
additional info: i'm afraid of trying to upgrade to WM6 or WM6.1,may be i get it bricked for life this time!!!!
should i use WST to restore my old IPL/SPL?
what can i do to use WM6 or 6.1?
thanks for taking time to read this thread, i appreciate it
Try to install an official rom from cingular or t-mobile and then try to upgrade to wm6.1
solomhamada said:
Hello All Developers,
It's my 1st time yo post a new thread, well thats because i always found the answer in either the subject or the answers. Yet, for problem in hand, I cant find any thread with it included.
I bought a G3 Wizard, and I fell in love with it, this is not new, i fall in love with all my mobiles and PDAs.
I have a Himalaya too which is much more simple than Wizard regarding upgrading. and here we go
I followed the instructions in the sticky thread titled:
[READ FIRST] The Definitive Guide to Unlocking & Rom Upgrading G3 Wizards
I found it very helpful. I followed mainly the FARIA version too, i was reading the 2 threads in parallel to double check my understanding.
it all went great .. till the IPL/SPL upgrade step, i followed my guess that i dont need to go though the 2.26 ROM to update afterwards to 3.08. so i upgraded to 3.08 and all went well.
the next was to upgrade to any WM6.1 versions. and for my sorrow, all of them failed to update.
the failure it self was a piece of art. after the completion of the update taking its 10 mins, it just hard reset my device. no new rom is installed.
my guess was, go back to 1.05 and go to 2.26 instead of 3.08
i did that and found my IPL/SPL changed from 3.08/3.08 to 1.01/3.08 even though the rom is supposed to have both of them equaling 1.05
ignoring this fact "an error i'll regret soon" i tried to upgrade to any WM6.1 ROM and voalla
I BRICKED MY BELOVED WIZARD.
yes thats right, it stuck at 98% and sowed a failure message. allowing me only to follow the recovery steps. and i got this 4 strips screen (i'm counting the white strip too)
any way, after trying with different roms, different uti upgrading file, all reached the point of failure.
so, i kinda lost hope, and removed the batt, the SIM and left the device like this for 4 hours or even more.
i returned from work, and prayed to god to help me. i cant live without my beloved Wizard.
and the only thing i could do was to try to install the button 1.05 rom again. i tried b4 the 4 hours break, and it failed just like the others.
i dont know how but while praying , the mobile continued to flash the rom and booted completely!!!
now, after this story, here is my current status,
IPL/SPL = 1.01/3.08
ROM : button 1.05
additional info: i'm afraid of trying to upgrade to WM6 or WM6.1,may be i get it bricked for life this time!!!!
should i use WST to restore my old IPL/SPL?
what can i do to use WM6 or 6.1?
thanks for taking time to read this thread, i appreciate it
Click to expand...
Click to collapse
Perhaps! your phone is still CID locked and you upgraded to 3.08,sometimes,while downgrading from 3.08 to 1.xx,spl freezes at 3.08,now try to upgrade back to 3.08 and downgrade first to 2.xx by flashing the official rom and then downgrade to 1.xx.
or,download the latest version of WST 4.2.2 and check the CID lock/unlock status,if its still locked,you can try to CID unlock with WST 4.2.2,its seen,it sometimes performs the CID unlock with different SPL other then 1.xx,atleast one user did report this successful.