OK, I have a Cingular SX66, I flashed it using the WWE Versions With Arabic Customizing WITHOUT the ExtROM, meaning I kept the Cingular ExtROM, no problem, flashed find.
After that, I flashed the RadioROM 1.06.02 ALONE, and right now, when I hard reset, it says NO GSM, in other words, it became a PDA only, phone function is no longer avaiable. I tried to flash other i-Mate ROMs, but it keep says Country ID is not correct, N-N-12-12-12. I ran GetDeviceData.exe, it comes out like this:
PH20B1 B 1 WWE E 1.31.00 0 0 1.31.112
So now, what is my country ID so that I can use the xda3nbftool.exe? It used to be XGULA001, or is there a way to execute the program without checking the country code, or a ROM with no country code checking.
TIA for all of your helps!
Still looking for help, tried O2 launch ROM, wrong Mobile ID error.
BTW, this is the DeviceDate.txt, before and after:
Before:
PH20B1 B 1 WWE E XGULA001 1.20.10 1 0 1.20.115 1.02.10 02.10
After:
PH20B1 B 1 WWE E 1.31.00 0 0 1.31.112
Nevermind, problem solved by flash another RadioROM from QTEK.
Paper weight
JRSmooth, I just saw your posts. I'm experiencing the exact same thing!!
I tried to upgrade my phone during the Christmas vacasion and haven't been able to use it ever since. The radio says FAILED during the startup sequence (which takes forever after the "upgrade")
How exactly did you fix it??
Re: Paper weight
GNU said:
How exactly did you fix it??
Click to expand...
Click to collapse
Well your situation maybe different from mine.
The radioROM I used was corrupted, I kind of knew it because when I flashed it, it did not show what version of radioROM am I flashing into. Now, what error message if you try to flash it again? Try to use a different radioROM from the same mfg. as your last flash.
Hope this help.
Well, it's a kind of embarrassing situation...
I've flashed my GSM device with a CDMA radio stack... It shows up as FAILED if you look at the version.
Hello,
Because your device IDs are different, eg, PH20B1 as opposed to PH20B0, you'll have to make a batch file to fix this. Here are a few instructions I threw together but REMEMBER - I take no responsibility for any damage done to your device. You are following these instructions below at your own risk!
1.) Download a full ROM upgrade file of your choice. I recommend the i-mate one in this folder here - ftp://xda:[email protected]/Imate_PDA2k_WWE_12200_162_10600_SHIP/ but feel free to use another.
2.) Extract the files from your full ROM by opening it with Winzip or Winrar and dumping it's contents into a folder. From now on it will be refered to as "your folder".
3.) Copy the file "GetDeviceData.exe" from your folder to your device and run it. It wont appear to do anything but it has!
4.) From your PC, browse to the Windows folder on your device. Copy the file "DeviceData.txt" to your folder.
5.) Open the "DeviceData.txt" file on your PC. You will see what ROMs your device has installed on it. Mine reads (without the blank/null characters):
PH20B0 B
WWE E
O2___001
1.22.00 0 0
1.22.162
1.06.00 06.00
The "PH20B0" is the device id, the "WWE" part is the country code and the "O2___001" part is the operator ID. Identify this information from YOUR "DeviceData.txt" file as your devices are different from mine and you will need this info for your upgrade. Make sure you write them down because if it's incorrect, you'll get errors and your device will hang!!!
6.) Download the file attached to this post, "Fix.zip" and extract it to your folder. Make sure you have the two files "xda3nbftool.exe" and "Fix.bat" in the root of the folder, not in a folder of it's own!
7.) Edit the file in your folder "fix.bat" using notepad (DON'T RUN IT YET). Replace the words "PH20B0" with your device ID, "WWE" with your country code and "O2___001" with your operator ID. Now, exit this file and save your changes.
8.) Run "fix.bat" from you folder. A Command promt window should appear and process the ROM files. This will change the device ID, country code and the operator ID to the ones you specified, thus allowing the upgrade to work on your device.
AT THIS STAGE, IF YOU CONTINUE, YOU WILL LOSE ALL THE DATA AND PROGRAMS ON YOUR DEVICE!!! BACKUP ALL FILES THAT YOU NEED!!!
9.) Run the "BaUpgradeUt.exe" file from your folder. This will start the upgrade process, so follow the on-screen instructions. During this you will see a screen with "From:" and "To:" showing what versions you have got to what versions you're going to. Make sure this data is correct and then continue.
10.) Once the upgrade has finished you'll be instucted to do a hard reset.
YOUR DONE - You should now have the upgraded ROM!!!
Good luck with this and let me know how you get on!
Regards,
Dom
I got a device of a friend. I'm not sure he used a wrong ROM image or the upgrade failed but it ended up with no Radio or ext ROM version in the boot screen .. only Rom 1.12.
More over, running getdevicedata.exe gives empty file with only "PH20" written there!
.. and any rom flashing gives operator id error.
my question is, can I update the Rom files to have no operator ID ?
Biso007,
In theory, you should just be able to follow my instuctions above but instead of using the standard PH20B1 or PH20B0 in the -sd switch ot the batch file, use PH20. This should allow you to continue with the upgrade process.
Regards,
Dom
Upgrading iMate PDA2k to O2 Rom
Can you tell me where I can download the Fix.Bat File?
Do you know if it will work to upgrade my iMate PDA2K to the O2 rom?
I keep getting an error message incorrect Country ID?
still getting the country id error...
can someone upload a country id free rom?
thanks
also it says checksum error.. how i fix this
thanks
heya,
i downloaded my actual ROM from my MDA III useing the XDATools to my PC. I named the file to nk.nbf. When I start the BAUpgradeUt.exe then after a short check the following error appears:
ERROR 102: CE IMAGE FILE CHECKSUM ERROR
How can i correct this?
I used the latest TMA GER Update from T-Mobile. I changed some programs in the \Extended ROM\ Folder ... can this error come from this?
Pls help me
XdaTools is a backup utilitty just for HTC Wallaby series i.e O2 Xda, T-Mobile MDA, Siemens SX56... and not for the MDAIII (HTC Blue Angel series). You have to use another tool, mtty I guess
If you dump or flash a ROM to your PC, you can not simply name it *.nbf.
The dumped versions are all *.nba files, and need to be converted (=coded) to *.nbf files to work again with the BaUpgradeUt.exe tool.
Conversion goes via the xda3nbftool or by hand (XOR it).
Also not that your PDA has 3 ROMS...
I have a qtek 9090 (dangard distributed) with blue angel wm2003 software installed on it
ROM 1.40.04 ITA
RADIO 1.13.00
EXT.ROM 1.40.153 ITA
i try to prepare my qtek with unlock but it return me an error when i execute it (impossible to find the executable control if are present DLL e name file are correct)
Can you help me to solve the problem???
I have to Hardreset my phone to proceed with this porcedure???
unlock italian rom
I have this problem. It is related to the directory that is used for installing unlock and unhide. You should move the whole folder from the directory "Programmi" to "Program files" and run the program from Start.
It will work
In bocca al lupo :lol:
Great
Thank you for you help now work fine
DOC Repartitioning tool locking up extended ROM
While trying to prepare my qtek 9090 for WM5 the following is happening:
Unlock tool confirms "extrom unlocked"
when repartitioning with DOC tool I get the error:
FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed.
result when checking available storage via Space Detective:
Extended ROM 16mb - used 16mb
Storage 43.3mb - used 43.3mb
both are locked up after this.
after unlock I can manually delete extended ROM via Resco Expl. but formatting the Ext. ROM with DOC tool is not working.
Does anybody have a work around for this? Or has anybody run into the same problem?
Device info current is:
1.40.00 WWE
03/10/05
1.13.00
1337.42
1.40.556 WWE
Error when partitionning
I've got exactly the same issue with my Qtek 9090 with the original ROM
My Qtek 9090 Dead after or in time flashing
I try .....
1. Flash with NO_ID
2.TRy via romupdate and nb1-file
3. Try via I-mate and T-mobile roms includes NO_iD
and nothing... only dark screen and USB or Serial string......
HELp plz.
...... and IF I insert in it SD card string serial no change after put him in cradle.....
What you can try.
if you have the seral message on your screen then just replace it in cradel and rerun the no_id application.
Are you SURE that you are using a valid ship.exe file and that you have extracted all the files and are following the upgrade instructions for 1.42 as per wilki.
MDAIIIUser said:
What you can try.
all THAT MAY BE
if you have the seral message on your screen then just replace it in cradel and rerun the no_id application.
Yes try, i start no_ID (with many roms) and 9090 waiting 20-30 minutes after this connection error
Are you SURE that you are using a valid ship.exe file and that you have extracted all the files and are following the upgrade instructions for 1.42 as per wilki.
Yes I extract all files , I try many ROMs for I-mate , Qtek , T-mobile in various version ..... I try make SD-Card with dump of rom,......
Only one that i cannot see How Update 9090 from SD to ROM or how copy dump of the ROM from harddrive via MTTY to 9090
This`is Unreal I work with PDA 3,5 years ago but look this bugs first ........
Click to expand...
Click to collapse
We have had a few (very few) that were not able to do an upgrade form thier pc. Not sure if this is a USB issue or software but after all the suggestions that we gave these people and none of them worked all they had to do was move over to a different pc and it worked.
So we know that the wiki 1.42 upgrade page works, that the file works and that the instructions are correct. Best for you is to try a different pc.
I had one of the first versions of WM5 on my blue angel, and decided to go downgrade back to WM2003 beacuse of the lack of applications for WM5 at the time. I now wish to go back to WM5, and cant beacuse devicedata.exe creates devicedata.txt with nothing more than PH20B in it.
I.e I should get something like PH20B 0 B GER R T-MOB101 1.12.00 0 0 1.12.100 1.02.00 02.00
when I only get PH20B.
Can I type this info in manually?
My device info is as follows:
I have a orange m2000 with the iMate 1.40.00 WWE ROM that I think is cooked using radio version 1.13.00 and protocol version 1337.42. ExtRom seems to be blank
I have created PH20B 0 B WWE E ORANG001 1.40.00 2 2 1.12.139 1.13.00 04.00 would this work for my device??
Thanks in advance WWWeed
Anyone Know if I can get away with just reflashing it with the latest ROM as I have patched once when I first upgraded??
Also where are the ExtRom patches located on the FTP? Theres no URLS on the wiki (http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_WizardPort_v1.3-TuMa)
I need to find
* ?MidletManager-TuMa.cab - Installs the Java Midlet Manager
* ?ArcsoftMMS-TuMa.cab - Installs the Arcsoft MMS Composer (NOTE: You must create an account)
* HTC Camera-TuMa.cab - Installs the HTC Camera and updates MMS for Camera operation
* HTC Camera-TuMa-?RamDisk.cab - This is an additional .cab file, this can be installed onto the RAMdisk ("Temp Disk")
If I can get this all working, I'll make a nice donation on XDA developers!
There resaon you only see the device name in your txt file is that it has a lot of charters that are no printable and you are only looking at the first few charaters, (Wiki getting started does a better job of explaining that).
You can't copy your created txt file to your device (well you can but it does no good). The file is need in its full form as in with all the rubish (I think but have never provesn it) that the file is created by the upgrade process and that the country code error derives from the check of that file and the header of the rom that you are flashing.
So the short of all that is if you need the latest OFFICAL rom (1.42) then follow the instructions in wiki on flashing it,
If you want the latest WM5 (1.3)rom then .... Follow the instructions in wiki else follow the instructions in wiki.
As for the cab files and the link to the WM5 1.3 rom well there is always wiki...
The cab files are part of the rom which can be found under the link "2 Download the ROM from here" wihch part to of the instructions in the section above your own cut and paste. (thats the also the Link BTW)
Have fun!!
Cheers for your time and patience MDAIIIUser,
Guess it was just me being stupid
Am now on the 1.3v WM5 Cheers!