Hi,
I just would like to know if it's possible (or if it's a stupid question) to put a rom of a Qtek 9090 on a Qtek 2020.
Why this question ? Because the Qtek 9090 have the same processor and (I suppose ) mainly the same hardware than the Qtek 2020.
Benefits of the manipulation : WM2003 SE, BT Widcomm stack, ...............
Did someone have this rom ?
If no, I have one
and you're still waiting to publish it !!
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
To freddyzaz
To freddyzaz
Tofreddyzaz
freddyzaz, if you really have this ROM from Qtek 9090 - please post it, so we can see what can be done with it.
Can you upload the ROM of qtek 9090??
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Hi,
I've posted the Qtek 9090 rom. Enjoy it, and please post your results here
Re: Can you upload the ROM of qtek 9090??
van said:
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Click to expand...
Click to collapse
Hi Van,
I will try it for you and will add comment to XDA-Forum,
For O2 XDA-II -> everything is possible .... like mission imposible ... and make it avaible.
Mentioned ideas the same with mine, ... we will use O2 XDA-II or XDA-II(i) or XDA-II(s) or XDA-III ??? where the core hardware inside is not much impressive.
Chim sao / VHS
mamaich said:
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
Click to expand...
Click to collapse
Wrong my Qtek 9090 has a PXA263 400Mhz...
from the registry I noticed a difference in the bluetooth device:
qtek2020:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ASIC5_BTUR]
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="ASIC5_BTUR.Dll"
"FriendlyName"="BT on COM6:"
"Index"=dword:00000006
"IoBase"=dword:afe00700
"IoLen"=dword:00000024
"Irq"=dword:00000022
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
qtek9090:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BlueTooth]
"DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,\
00,00,00,00,00
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="Serial_BTUR.dll"
"FriendlyName"="BT UART"
"Index"=dword:00000004
"IoBase"=dword:aa050000
"IoLen"=dword:00000024
"Irq"=dword:00000011
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
different iobase, different drivers.
I don't have a qtek9090, so can only look at the binary for differences.
It's normal because the 2020 has a MS drivers/stack whereas the qtek 2020 has a WidComm drivers/stack but the drivers file has the same name.
In the Qtek 9090 :
"Bluetooth for Windows CE BT-PPC/PE Version 1.0.0.1900"
I need the password for this ROM... :roll:
Try to flash ROM- Qtek 9090 for MDA II
I have been trying flash ROM- Qtek 9090 for MDA II but no success :evil:
1. Copy NK.NB1 to the SD card
2. Enter bootloader mode
3. Hook up a terminal on the serial line
4. Insert SD card
5. Type 'S2d'
Nothing
Any Ideas ???
I dont think just flashing the qtek 9090 rom will do the trick.
there's just to much difference between the devices.
but I'm looking forward to you guys getting this done. there are so many freaks around here
off topic
@JRC
Where did you get the Qtek 9090? And how much did you pay for it.
I would like to buy one, but here in Belgium or the Netherlands, they still not available
freddyzaz: Could you please download all 3 ROMs (OS ROM, Extended ROM and Radio ROM) and post it here?
itsme: Could you please create the .nbf files when freddyzaz will post the ROMs here?
Sorry, I can't. The 9090 was just for a test, and I've not the possibility to have it again.
Aarrrgghhh... That's bad, that's bad...
I think we need all these tree ROMs backups, 'cause I'm "sure" RadioROM is little bit changed (updated?)... And ExtROM we need for great new versions of included SW, of course...
But I hope, if we get these ROMs someday and try to flash them, it should work in Himalaya as Himalaya & Blue Angel are different only in keyboard and WiFi, the rest should be same (CPU, RAM etc...)
As far as I see 9090 uses a different BT chip: BRF6100, that is probably incompatible with ours. Display hardware is also different - when I've replaced ace_ddi.dll with this - my iMate hanged on startup. Camera is also incompatible - the 9090 application crashes at start.
i think it's not the right way by trying to get the whole thing working with the qtec 9090 images but to extract the wm2003 system.
so we get a completly "naked" system in which we can load our old software and drivers from the qtec 2020.
I guess that's the way to get started on this.
ROM Qtek 9090
Flashing error again
I think that we need WM 2003 SE and smart bluetooth profile supported PAN. Some months ago nick HTC already had test ROM with WM 2003 SE and it is working. Now Tmobile and mmO2 have tested ROM and we have to wait for launch MDA III fist in Nov. :wink: then the upgrade 2003 SE will be posted?
May be somebody can share the beta upgraded ROM WM 2003 SE here???
Thanks
hi guys
for me need change lang from Fance to English for QTEK 9100
my phone information:
------------------------------------------------------
model: wiza200 QTEK 9100
HTC INNOVATION
IPL 1.01
SPL 1.01
GSM
VERSION ROM 1.1.7.8
DATE DE ROM 9/16/05
VERSION RADIO 01.04.10
VERSION DE PROTOCOLE 4.0.13.17
VERSION DE ROM EXT 1.1.7.110
---------------------------------------------------------
need help, where i can find latest soft. wich MaUpgradeUt_noID need to use. nee full info
thank you for help
How many PDA's do you got dude.....I saw similar messages from you in every forum here
I could only tell you this, just read the forum everything you want to know is explained a thousands times (read all the sticky's).
2 Weeks ago I was a complete Wizard/PDA noob, look what I know now already, just my browsing around this forum for a few times every day
Simple explanation for upgrading how I did it about 10 minutes after discovering this forum:
1) Install ActiveSync
2) Unlock CID (and SIM if necessary) with LokiWiz
3) Download ROM, click executable, start updating and that's it!
did they stop support for this model?
I don't know....but what I do know is that it's about time Qtek releases a new Rom with AKU2.2/3 !
But because I got an MDA Vario I cannot register myself on the Qtek website, because you need an Qtek IMEI number.
Anyone willing to share their Qtek IMEI number so I can register myself and can watch the forums for what is coming (or what not)?
If so...PM please
Molski
qtek 9100 latest version
English (WWE) : (AKU 2) Rom:2.17.7.2 Ext:2.17.7.102 Radio:02.07.10
so there is no update
Hi guys!
Two days ago I started to try to put a French rom on my VPA Compact II. I searched for french wizard roms and found three (in the qtek section on your FTP)
Evertime I try to "install" one of the roms I get an error [296] MODEL ERROR. I even tried to export the nk.nbf from one of the qtek roms and install it with the noID update tool.
My phone is CID-Unlocked. Current ROM-Version: 2.21.3.1 GER
Is there a way, to put a French ROM on my phone?
Please try to help me!
Greets, Vianney
---Edit
Got the Problem... The roms I tried to use were called RUU_Prodigy (another question is qhy they don't work?!) is a RUU_WIZARD FRENCH out there?!
Mr. Vi said:
Hi guys!
Two days ago I started to try to put a French rom on my VPA Compact II. I searched for french wizard roms and found three (in the qtek section on your FTP)
Evertime I try to "install" one of the roms I get an error [296] MODEL ERROR. I even tried to export the nk.nbf from one of the qtek roms and install it with the noID update tool.
My phone is CID-Unlocked. Current ROM-Version: 2.21.3.1 GER
Is there a way, to put a French ROM on my phone?
Please try to help me!
Greets, Vianney
---Edit
Got the Problem... The roms I tried to use were called RUU_Prodigy (another question is qhy they don't work?!) is a RUU_WIZARD FRENCH out there?!
Click to expand...
Click to collapse
My question is answerd... Just found the GREAT how-to written by Isidoro telling, how to flash any rom to a CID-Locked device.
Just createt my first own rom in french =) THANKS Isidoro!!
Hello, my brohter present me his qtek 9090. It is a TMOBILE MDA III. It was in german and i downloaded a version in english the qtek 9090 windows mobile 2005 m2000. Now it is in english but i can not use the WIFI feature. In Settings/ System / ABOUT appears Windows Moile Version 5.0 OS 5.1.1700 (build 14343.0.0.0).
I donwloaded a few roms but all of them say that my pda is not compatible with that version. Can You help me????? Thank You Very Much
Did you read everything from this page?
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
You have there ALL the information you would need about your problem.
BTW: you said nothing about what rom have you tried to install - I mean name (like Helmi 1.3.2, or Baniaczek R2 etc).
Thank you very much Jakudd for the reply of my message. I have tried all that you tell me. The rom i installed yesterday was;
Rom Windows Mobile 2005 Qtek 9090 Spv m2000 (the full name of the file). So i think i have installed the orange ROM. It was installed with the Tmobile ROM but i dont know wich ROM. When i har reset (power button + reset) the pda it apears something like that
R 1.13.00
N 1337.41
D 5.03.02 WWE
i have donwloaded 4 ROMs. I changed de BAupgrade por MAupgradenoid as i have seen in this forum. I use the MAupgrade, the computer says that is going to upgrade the pda but then, when i click in upgrade, the activesync turn off in the computer and the upgrade say that there is not any pda conected to the pc. I hope you to understand me what i want to say... sorry of my bad english.