Wmodem Problem - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Have the so called latest O2 Rom image installed 1.31 .. trying to use Wmodem.. can get XP to recognize it as an HTC USB Modem. it dials TMobile here in the US.. but as soon as it gets to Registering Computer on Network, WModem hangs up and resets the radio..
Any ideas?
Thanks!

Related

Big author Pride on the line...Molsk, Sumitter, Mr. Clean, .

First of all, I install T-mobile clean 2.26, I recall the internet working and with activesync, cause I got sbsh weather updated. Dunno why now it does work on my gf phone. Then I bought a phone and install the T-mobile 2.26 and realize it didnt' work and mokiz version too, then I try Mr. Clean 2.24a, and still doesn't work.....any help would be great.
My home connection with PC.
Microsoft activesync 4.2 on telus DSL line. Try all these rom,
My 8125 CID lunlock ...not sure..I tried to unlock it but dont' know if I got it
IPL -1.08 SPL 2.25 ...try all these rom....Mr. Clean 2.24a, Mosik 2.26, Sumitter 2.24, T-Mobile 2.26.
My gf 8125 CID lock
IPL 2.x SPL 2.x too, try all the rom on hers too, same prob.
But I swear her phone could update the weather before cause i'm looking at it wiht only two days with weather but now I can't do it.??
I thought it was my computer setting cause one time my comp frozen and had to reboot and it was around the same time. So instead I tried on my brother labtop which he just formated so everything should be alright.
But I was still unable to connect to internet with Activesync or bluetoothl.
Please help ......big Cooks.
There's a checkbox in AS that lets you forward the connection... tried that?
I'm running the molski 2.26 rom and had a mr clean rom before, as well as some factory TMO/I-Mate/Qtek roms. Never had any problem connecting with AS.
Appreciate the help and reply.
Hi, tomasz
Thanxs for pointing that out, in AS, I went to connecting setting and found what you were saying, the section my computer is in automatic setting, but I also tried my computer is connected to internet. Still I get this error in IE when loading a webpage, "The page you are looking for cannot be found due to unkonwn error 0x80072f78".
I wouldn't be so annoy if I didn't have internet in the beginning, but when I first got my 8125. Everything works fine with Mr. Clean and T-Mobile rom, without touching any setting in my comp and the phone, AS works like a charm, internet thur AS work fine without any manual setting.?? I didn't know things can change so much all a sudden? I hope someone out there know exactly what the problem is? thanxs again for the post tomasz, hope you have another solution or someone out there does....
Q9100 half dead!!!
Hi pals..
Listen gotta a big problem with my Qtek 9100.This is it. I've tried to update the pda to spanish so I could sell it to a friend of mine.I've downloaded the 1.3.7.5 version from xda-dev.Everything was working fine but in the middle of the process the power in my house failed.So the process stoped now I got the damn OS in Spanish but it doesnt work because it didnt installed properly.I've tried out everything I new about this pda.That is try to install in bootload mode,the only thing I've managed was update the IPL and SPL (that I dont know what doest that means) for that I've used an Orange ROM,if it would have updated properly it would show up the W2k5 customised by Orange but no,it keeps stuck in the same Qtek welcome star up image.
What and I supposed to do? I heard that I could install it loading it direct from the SD Card but I have to do it by copying an Backup SD card already done once mine OS is damaged. I've already tried the one in Dutch on the XDA ftp web page.But it seems not to be working.
Regards
Luiz Santos
Finally got my internet working thur AS
Okay for anyone that is having problems with Internet working thur Activesync, you can try to go into start, setting, connections, usb to pc and uncheck enable advanced network functionality.
And it work for me, yahooooooooooo....

I-Mate K-JAM Radio

Hi guys,
I am guessing my problem is the fact that there is something wrong with the devices radio, more the radio rom.
I a while back flashed my dad's KJAM, and it all worked fine, he however has not used the actual phone part of the device since then, and now that he needs it, its not working.
The phone is not in flight mode, and it doesnt ask for a pin, as thats how he set it before I flashed it.
The phone keeps searching for service, and when I try to manually set the network, it keeps comming up with some or other problem.
The phone worked before I flashed it, so I am guessing it is the Radio ROM.
I am thinking of ugrading him to WM6, is this recommended at all? Which thread is best to follow for upgrading him to WM6?
His current details are:
ROM Version: 2.16.9.1 WWE
ROM Date: 2/6/06
Radio Version: 02.07.10
ProtocolVersion 413.1.03
ExtROM: 2.16.9.101
Any help will be appreciated.
P.S. I did just try to the radio rom that is on the xda ftp, for the wizard, I downloaded and tried to load the REAL_Radio_2.61.11 ROM, but that does not want to load for some or other reason, it first complained about the radio update util and said I must update or something, the second time I tried it was a communication error. I am using my JASJAR's USB cable, is this a problem at all?
Try to change the radio rom to 2.19 or higher but i recommend you to flash first the 2.19 if that fails then try more higher.. i guess 2.2x and 2.6x something like that... i forgot..
Ok, u got a link for me for those ROMS?
wait a sec..
If you search and read all the stickies thread you might encounter this one your self..
http://forum.xda-developers.com/showthread.php?t=268031
There at that thread have a varius radio roms to download..
goodluck!..
post the result afterward
Thanks...I didnt see that one...I will have a look...shot for the help...
Ok, ive tried a few different things.
I tried to get it to connect with activesync, but it just doesnt want to work, I have also attempted a hard reset, and activesync doesnt work either.
Before I did a hard reset activesync 'did something', and a message came up saying it couldnt get an IP address from the server, and on the PC activesync came up with some other thing saying it cannot connect to the Windows Mobile Powered Device.
After the hard reset, I try activesync again, and now absolutally nothing happens on the phone. On the PC the little network icon comes up aqquiring an IP address and dissappears, and the just sits there...
At this point I ran a exe file on the K-JAM, to put it into bootloader mode, I ran the update tool, and again it complained about the update utility, again not changing anything, I ran it, and then it gave a communication / connection error, and a third time also a communication / connection error.
I tried only one radio rom, I am going to try it with the oldest version on that page, if that doesn't work, then I don't know. I tried it with ActiveSync 4.5 and 4.2.
In the mean time I tried the original ROM file from clubimate, that actually loaded, and worked, except the network still isnt working.
I also tried syncing the phone on another pc, and funny enough that worked.
On trying to load the new Radio ROM, it started the update process, and at that moment the phone jumps to bootloader mode, obviously the activesync connection gets lost, the update tool waits a bit, and then suddenly complains about the update tool, saying I need a new version or something.
I have checked the bootloader version of the phone, and it is version 2.x.
I try it again and then I get a connection error....I really need to get my dads phone working again.
Any ideas?
Not sure which Radio's you are trying but go grab a Radio Only ROM. TMobile 2.19.11 UK seems to be a very good and stable one. These are found in the ftp area: ftp://xda:[email protected]/Wizard .
Hope that helps.
Thanks for the help.....ive tried 3 different ones from there, they all do the same thing...so its a bit wierd.....
On the other side of the coin I decided to stick on another sim card, and it works just fine on the other sim card
So the radio is working just fine afterall.....just got back from the service provider and they rekon either the sim card is damaged or its a network error....so lets see what happens.....
Thanks to everybody for the help...
lol..
so its just the simcard after all..
lol yeah....
Although I would still like to know why I can't update the radio anyway...
isnt it because of your activesync?
I don't know what it is...
I used it on another PC alltogether and activesync worked just fine...the update tool interacts with the device, starts the update process, and then the phone goes to bootloader mode, activesync obviously losing the connection, the update tool waits a while and then suddenly says something about the update utility being old or something, I need a new one or what ever....
Then while in bootloader mode I try the update again and then I get a connection error.
Its all wierd.....

Windows Mobile device center problem

After Flashing the latest Hyperdragon III rom I can't set up a partnership between my kaiser and the device center anymore.
Anyone else having a similar problem?
I tried flashing back to my previous rom and it won't set up either.
Everytime I click on "set up your device" I get the following error:
There is a problem with your connection. Please disconnect and reconnect your device and try again.
I tried reconnecting, using another usb port, reinstalling the device center, removing every trace I could find about my kaiser in device manager.
i'm running vista x64 and the latest device center I could find on microsoft site.
my kaiser has hardSPL 3.29.
I don't have any other problem with it, I can transfer files in the device center when I "connect without setting up my device"
anyone who can help?
thanx,
Bonusbartus
you might want to go back to device center 6.0 6.1 gave me nothing but errors.
Thanks, can I use the 6.0 device center version with 6.1 wm roms?
I installed 6.1 because it was on the cd packaged with my TytnII (wm6.1 rom already installed)
Well, it works, don't know why or how, i think installing the 6.0 version helped, thanks
Has not worked for me. I have tried both WMDC 6 and 6.1 and I still cannot get my Tilt to connect with WM 6.1 on Vista 64

Losing USB connection when trying to update ROM

Hi.
I have a Wizard G3. I'm running Windows 7 and therefore I don't have Active Sync, but the Windows Mobility Center. I wait until it says connected (no partnership) and then I run the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE file. The problem now is that it loses the USB connection a second after I tried to update the ROM. Phone remeins in Bootload modus and the custom ruu wizard crashes. Does anyone have an idea what might cause that?
Thanks.

[Q] Problem Establishing Sync-Center Connection.

I'm trying to flash a ROM on to my HTC HD7 and I am having a problem when I try to establish an Activesync connection with my phone. I have HSPL all set up on my device (an unlocked T-mobile HD7 on Rogers) the phone OS version is 7.0.7004.0 and my bootloader version is 3.1.2250.0(119314).
I have tried to soft-reset, hard-reset etc. and these things haven't worked. When I run Task 29 I get to the part where it tries to verify if I have an active connection with Activesync (or Sync Center or whatever) and it fails to work. I have a Windows 7 32-bit computer. I have checked my flash versions, .net framework version and everything in between, nothing seems to be wrong and can't figure it out!
If anyone can help me establish a connection with the Sync Center I would be very grateful.
Thanks!

Categories

Resources