Hi.
I have a Wizard G3. I'm running Windows 7 and therefore I don't have Active Sync, but the Windows Mobility Center. I wait until it says connected (no partnership) and then I run the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE file. The problem now is that it loses the USB connection a second after I tried to update the ROM. Phone remeins in Bootload modus and the custom ruu wizard crashes. Does anyone have an idea what might cause that?
Thanks.
Related
So i'm a clueless noob and am trying to install Windows Mobile 6 using the "WM6 UPGRADE FOR HTC 3600 & ORANGE SPV M700 - AX3L OS v2.0.8.1" found on torrentz.com
Anyway whenever i try to install the os i'll eventually lose connection to my active sync and my device will no longer be recognized or conncected to my pc (i think it looses connection when the bootloader is prompted).
I'm pretty sure i am making a simple mistake that could resovle the situation but im not sure.
Also, has anyone else tried to use the same upgrade? is it safe and successful?
thanks for any help you can provide
when it loses connection, leave everything connected as it is and restart the update program... it's timing out when your device gets put in bootloader mode
Hello.
First of all i am new.
secondly:
I flashed my device with a 10 mb rom, and my device is really really slow now. So i want to recover to what it was from the start, a danish rom i have on my computer.
But i cant connet to activesync. It just keeps "Connecting" and after a half minute it gives me an error.
What to do ?
Its a G4 CID locked Device (Wizard)
XabdullahX said:
Hello.
First of all i am new.
secondly:
I flashed my device with a 10 mb rom, and my device is really really slow now. So i want to recover to what it was from the start, a danish rom i have on my computer.
But i cant connet to activesync. It just keeps "Connecting" and after a half minute it gives me an error.
What to do ?
Its a G4 CID locked Device (Wizard)
Click to expand...
Click to collapse
10MB? What ROM? Are you talking about a Wizard Device? Bacause Wizard's ROMS are between 40-70MB
JP
Yes i know, i used one called wizard-aku2.3-EXTENDED-ROM-FOR NON-CINGULAR-USERS.zip
My problem is that i want to flash the real rom, i got it on my pc, but i cant connect to activesync.
use the sprite backup if its not work use usb switch and open it in.your ppc then click on usb and ok but this tool.does not work in bootloder mode download sprite backup.and install.in.ur pc then connect ur ppc it will.work in bootloader mode
Hello,
so my T-Mobile MDA III (german) = HTC Blue Angel ist not working any more. I tried to apply the latest update form T-Mobile but it failed.
Now I am stuck in the bootloader. It says: "Serial" above and "v2. 08" below. When I insert it into the cradle "Serial" changes to "USB".
I cannot hard or softreset the phone. It stays in the bootloader. When I connect the MDA III to Windows 2000 or Windows XP it is not recognized anymore by the device manager. In windows 2000 no driver is being installed and under windows XP (with SP3) "unknown device" is being installed. No chance to manually change to any other driver. Also tried new windows installation.
Tried with Active Sync 3.7 (original from t-mobile), 4.2 and 4.5.
Flash via SD Card is not possible, if I understood the posts correct. Further mtty does not detect anything at the usb port. BaUpgradeUt.exe and MaUpgradeUt_noID.exe fail.
Any help greatly appreciated.
Fixed mine....
Exactly the same problem with mine Thought I had blown it up. Left it for 5 mins then connected my USB(still no activesync connection and no lights or nuthin) but selected the MaUpgradeUt_noID.exe again and it just worked.
Hope yours works too.
No it doesn't help.
Hi! I know that it was long time ago, but how did you manage to solve the boot-loader problem?
I didn't.
Same problem with 2.06
Restart
It really helps. Restart and try again:good:
Had the same problem right now.
Reflashed MultilangROM - didn't help.
Reflashed Radio ROM - all's fine now
I have been trying for almost 2 days straight to flash a new HardSPL then ROM to my Touch Diamond. I have done everything I can possibly think of but nothing works. I think the problem may be that I am using VMWare Fusion (on a MacBook Pro) running Windows 7. I can establish a connection with WMDevice Center perfectly fine, the RUU puts my Diamond into BootLoader and it says USB in the white area. However, after this step the status bar shows up on the computer for about a minute then I get error 26x (260, 266, 264....) cannot connect to device. I don't know how to work around this. I would just boot from the Internal Storage but I need to be able to flash a HardSPL before I can do this. I somehow was able to flash a new SoftSPL (I'm running SPL-0.64.000 right now). If anyone has any ideas about what I can do please let me know. I've searched the forum, done hard resets, tried JumpSPL v1, tried to boot a ROM from Internal (can't without updated HSPL), everything. I'm out of ideas.....
Im having the same problem i almost slammed mines. At first the activesync use to come out now it doesnt even do that some choose what to open with box comes out. This phone does things random i have no idea why. Everytime it connects i press the update to install the new windows 6.5 on it and the the sound of it disconnecting shows up then it sounds again and then the screen says usb and then on my computer it says theres no htc connected so i wait to see and i get a error after 3minutes of waiting then i got to reset. Its getting me real frustraded.
I'm trying to flash a ROM on to my HTC HD7 and I am having a problem when I try to establish an Activesync connection with my phone. I have HSPL all set up on my device (an unlocked T-mobile HD7 on Rogers) the phone OS version is 7.0.7004.0 and my bootloader version is 3.1.2250.0(119314).
I have tried to soft-reset, hard-reset etc. and these things haven't worked. When I run Task 29 I get to the part where it tries to verify if I have an active connection with Activesync (or Sync Center or whatever) and it fails to work. I have a Windows 7 32-bit computer. I have checked my flash versions, .net framework version and everything in between, nothing seems to be wrong and can't figure it out!
If anyone can help me establish a connection with the Sync Center I would be very grateful.
Thanks!