Problems connection Activesync - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hello.
First of all i am new.
secondly:
I flashed my device with a 10 mb rom, and my device is really really slow now. So i want to recover to what it was from the start, a danish rom i have on my computer.
But i cant connet to activesync. It just keeps "Connecting" and after a half minute it gives me an error.
What to do ?
Its a G4 CID locked Device (Wizard)

XabdullahX said:
Hello.
First of all i am new.
secondly:
I flashed my device with a 10 mb rom, and my device is really really slow now. So i want to recover to what it was from the start, a danish rom i have on my computer.
But i cant connet to activesync. It just keeps "Connecting" and after a half minute it gives me an error.
What to do ?
Its a G4 CID locked Device (Wizard)
Click to expand...
Click to collapse
10MB? What ROM? Are you talking about a Wizard Device? Bacause Wizard's ROMS are between 40-70MB
JP

Yes i know, i used one called wizard-aku2.3-EXTENDED-ROM-FOR NON-CINGULAR-USERS.zip
My problem is that i want to flash the real rom, i got it on my pc, but i cant connect to activesync.

use the sprite backup if its not work use usb switch and open it in.your ppc then click on usb and ok but this tool.does not work in bootloder mode download sprite backup.and install.in.ur pc then connect ur ppc it will.work in bootloader mode

Related

Revive this bricked (?) Wizard!

I'm trying to fix my friend's MDA right now. The problem is, it's stuck on T-Mo splash screen. It can however go to tri-color screen. Can I save this MDA or should I bury it?
Any help would be appreciated
Hi!
At the tri-color screen you should be able to flash it with a new ROM. Just try it, that worked for me after a failed flash.
Cheers
djvw
rockmanneo said:
I'm trying to fix my friend's MDA right now. The problem is, it's stuck on T-Mo splash screen. It can however go to tri-color screen. Can I save this MDA or should I bury it?
Any help would be appreciated
Click to expand...
Click to collapse
I just had the same problem myself, talk about ****ting my pants.
I have a Dutch rom in my Vario and I cid unlocked it and tried installing
a US rom but the phone was dead after it.
In the tri-color screen I tried to load the new 2.26 US rom and then the latest UK rom but both failed with invalid Vendor id or something like that.
So I downloaded the NL rom from here and thnk god it loaded without a problem and the Vario is working again.
Sadly in Dutch but at least it works again, can anyone from Holland help me upgrade to the latest US rom ?.
Dave...
Dave...
Encountered some problem..
It would not connect to ActiveSync from tri-color screen. There is a 'USB' at the bottom screen when I plug in the USB cable, but I don't think the PC recognizes the device.
And the thing is my friend has never CID unlock the thing
He said he just took it overseas and never turned it off, when he got back here the phone went like this.
More help please
rockmanneo said:
Encountered some problem..
It would not connect to ActiveSync from tri-color screen. There is a 'USB' at the bottom screen when I plug in the USB cable, but I don't think the PC recognizes the device.
And the thing is my friend has never CID unlock the thing
He said he just took it overseas and never turned it off, when he got back here the phone went like this.
More help please
Click to expand...
Click to collapse
PC doesn't need to recgonize the device via activesync to flash the Rom.
Try and find your original rom.
Put the phone in the bootloader (canaryscreen aka tri-colored screen).
plug-in your usb plug.
And start the rom update utility.
Regardless of your activesync status it should start updating your mda.
This takes about 10 minutes, and will pause at some stage, don't be alarmed and don't pull the plug !!!
Good luck
the-equinoxe said:
Try and find your original rom.
Put the phone in the bootloader (canaryscreen aka tri-colored screen).
plug-in your usb plug.
And start the rom update utility.
Click to expand...
Click to collapse
Can I update using the latest ROM (2.26)? Why does it have to be original rom?
Regardless of your activesync status it should start updating your mda.
Click to expand...
Click to collapse
Even tho PC cannot detect the phone at all, rom update util still can go thru?
I will try again tonight, last night I tried, 2.26 rom update utility cannot detect the mda
Good luck
Click to expand...
Click to collapse
Thanks :wink:
rockmanneo said:
Can I update using the latest ROM (2.26)? Why does it have to be original rom?
Click to expand...
Click to collapse
It's recomended to go back to the original rom, so you can go back to the point before the problems began..
Even tho PC cannot detect the phone at all, rom update util still can go thru?
I will try again tonight, last night I tried, 2.26 rom update utility cannot detect the mda
Click to expand...
Click to collapse
In canary-screen mode the phone will have an active usb connection, ActiveSync won't detect it however, because the ActiveSync software on the phone is only started when windows-mobile is running (which doesn't occur in boot-loader).
The Rom Upgrade Utility, should be able to detect the phone.
But always make shure the battery has been charged (at least half-charged).
Several people on this forum have revived their semi-bricked phone this way.
Thanks :wink:
Click to expand...
Click to collapse
You're welcome

HELP! Can't Load Rom - Don't Want A Brick!

Guys,
I just tried to upgrade to a new ROM on my Cingular 8125. I have upgraded from the original rom to a Mr. Clean AKU 2.3 Rom a while back. This time I tried to load Ell's AKU 3.2 Rom.
Anyway, my computer locked and restarted during the flashing process (99%)
My phone turns on and shows the colored bar screen (is this called the bootloader?). This is all it does. I'm not sure how to try and fix this. I'd like to try and reflash a rom; however, if I try to do that I get Error 260. This error says it can't find the phone which is easy to understand since Activesync can't connect since the phone won't boot.
HELP!
SuperDodge said:
Guys,
I just tried to upgrade to a new ROM on my Cingular 8125. I have upgraded from the original rom to a Mr. Clean AKU 2.3 Rom a while back. This time I tried to load Ell's AKU 3.2 Rom.
Anyway, my computer locked and restarted during the flashing process (99%)
My phone turns on and shows the colored bar screen (is this called the bootloader?). This is all it does. I'm not sure how to try and fix this. I'd like to try and reflash a rom; however, if I try to do that I get Error 260. This error says it can't find the phone which is easy to understand since Activesync can't connect since the phone won't boot.
HELP!
Click to expand...
Click to collapse
i had this very proglem... TURN OFF THE PHONE ASAP.. as the bootloader screen will drain your battery very quickly.... reset computer and phone... plus in the USB cord.. and in the booth loader screen in the lower left corner.. you should see USB!!! just flash workin room.. and you should be set to go.. i believe>.
When I plug the phone in it does show USB in the lower left corner; however, The rom update utility can't see the phone.
Am I doing something wrong or should I be trying to install the rom in another manner?
SuperDodge said:
When I plug the phone in it does show USB in the lower left corner; however, The rom update utility can't see the phone.
Am I doing something wrong or should I be trying to install the rom in another manner?
Click to expand...
Click to collapse
hmmm i dont know... try restarting both devices.. other then that i cant hlep ya.. im still new to this...
USB means it is connected.
Again, keep the battery out when you aren't doing the flash. Reboot the PC in case the link is down.
Try flashing a stable ROM, like the Mr. Clean one you used before. Activesync doesn't need to operate, the ROM will see the wizard if the wizard says USB.
Zonealarm actually interferes with my ROM flashes, although it prompts me to see if it is ok; you might turn off your firewall prior to doing the ROM flash. If you do so, disconnect from the web.
I have also the same problem with my XDA 2 mini or the other called this the HTC Magician. I try to UPgrade my Radio 1.03 to 1.12. and when im applying the upgrade procedure the Upgrading stops and error. What happen now is my XDA 2 mini or HTC magician doesnt open now. only the word "SERIAL" and when i plug the USB, the word "USB" show on the screen................... Is there some one can help me pleasssse with my problem....

Bootloader and nothing else

So guys i have a big problem:
I wanted to flash to the Touch WM6 ROM but at 44% the setups stucks now when i start my pda I only see the bootloader and nothing else.
I also tried to use RUU to update to another rom but i cant because I cant connect to ActiveSync or something else.
But the PC still is noticing that an usb device is plugged in and in the top left corner the bootloader displays "usb".
So what can i do now?
Thanks
RUU can connect to a Wizard in bootloader mode, try to disable USB connection is ActiveSync and try again.
Hope you have downgraded IPL and unlocked CID at first. If not, look at the unlock sticky in the forum first.
When you say TOUCH I assume you mean the Wizard reTOUCHED and not the actual HTC TOUCH rom correct?
Madcap180 said:
When you say TOUCH I assume you mean the Wizard reTOUCHED and not the actual HTC TOUCH rom correct?
Click to expand...
Click to collapse
yes the reTOUCHed rom
//EDIT
OK i disabled the ubs connection in activesync and it worked!
Thank for your help.
But now another question:
Why didn the reTOUCHed rom didnt work for me? First time i flashed WM5 started up and i had still my vodafone branding and no touchflo.
Second time the setup got stuck at 40%
What happened?
That means your device is not CID unlocked.

HELP!! I think my Wizard is a Paper weight! Bricked!

HELP PLEASE!!
Ok so i think i bricked my wizard!
I have the t-mobile MDA wm5 unlocked g3.
I've flashed it to the WM6 Rom and everything had been working well, except there was no MMS feature on the phone at all which sucked! . My girlfriend thought it would be better if she did the "windows mobile update" icon feature that was on the phone to speed up the phone....She downloaded the updates & my phone shut off!! When it rebooted everything seemed normal...
1st.
T-mobile screen
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 10.1.0.811
-Then i get the green windows mobile splash screen, but after i get an error message!!
*Device Authentication*
“Device authentication failure. Please contact the product manufacturer. For reference, please provide your device ID.
3563820017905901 38000050bf3f5173”
Ive tried to boot in safe mode to try & flash my phone again but for sum reason my computer wont recognize my phone is plugged in! What do i need to do?!? Please help, any help is thankful!
is not a bricked wizard men
easy men easy... but please tell to your girl dont push everything that she dont nderstands... Everybody knows that upgrade official is only for original OS like windows XP or VISTA..
Firs of all
Put your Wizard on bootloaders mode... plug in via usb the PC Active sync wont recognize your phone.. then run the original shipped Stock ROM and then your Coocked rom...
But if the PC at the same time you place your Device on Bootloaders and plug it via USB... shows a pop up message that said Windows cant recognize your device or unknown device or something... Restart your Pc... Hard reset your PDA... and replug your Device as I said it before... if not check your USB cable maybe a broken cable failure...
IF NOT?????!!!!!!!! then Use another PC with XP!!!!!
If it still on his not reconized message you are in serious problem but your girfriend Too...
Good luck
Easy..."Device Authentication failure" is caused by your ROM. Just flashing another custom ROM and the message should go away.
I'm surprised that the chef that made your WM6 rom left the Windows Update feature in there, it was bound to crash a cooked rom, since the update service never worked properly anyway.
I'm sure flashing another rom will resolve this.
yeah, flash the rom (you might want to try WizFlo 20273 v6.1.1.3 - i'm on it, and loving it). heck, you can even do a hard reset and that would probably resolve it.

Losing USB connection when trying to update ROM

Hi.
I have a Wizard G3. I'm running Windows 7 and therefore I don't have Active Sync, but the Windows Mobility Center. I wait until it says connected (no partnership) and then I run the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE file. The problem now is that it loses the USB connection a second after I tried to update the ROM. Phone remeins in Bootload modus and the custom ruu wizard crashes. Does anyone have an idea what might cause that?
Thanks.

Categories

Resources