SSPL flash interruption with WM6??? - P3600 Software Upgrading

So i'm a clueless noob and am trying to install Windows Mobile 6 using the "WM6 UPGRADE FOR HTC 3600 & ORANGE SPV M700 - AX3L OS v2.0.8.1" found on torrentz.com
Anyway whenever i try to install the os i'll eventually lose connection to my active sync and my device will no longer be recognized or conncected to my pc (i think it looses connection when the bootloader is prompted).
I'm pretty sure i am making a simple mistake that could resovle the situation but im not sure.
Also, has anyone else tried to use the same upgrade? is it safe and successful?
thanks for any help you can provide

when it loses connection, leave everything connected as it is and restart the update program... it's timing out when your device gets put in bootloader mode

Related

Bootloader Screen

Hello,
I need some expert help to get my XDA IIs out of bootloader.
I attempted to update ROM and got stuck in Bootloader.
I followed directions posted on this forum to the letter:
Make sure your device or cradle is connected directly to your computer (so no hubs!)
Disconnect the device from the PC, or remove from cradle
Perform a "hard reset" on the device (screen will flicker but nothing will change)
Kill the BaUpgradeUt.exe program on your PC by using Window's Task Manager (CRTL+ALT+DEL)
Kill the wcesscom.exe program on your PC by using Window's Task Manager (this is the ActiveSync application)
Place the device back in it's cradle
Restart the upgrade program from your PC (double-click BaUpgradeUt.exe)
Still No JOY !!! Any suggestions ?
Solution to Upgrade..?
Hi, have you looked at this properly..?
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Or - If you're trying to update to WM5..
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
Then you should be ok.. Take a breather, start again..
Let me know how you get on..?
Cheers,
Stuck in Bootloader Screen
Mr Philly,
Thank you very much for your help, however I followed the links you gave me, and still have no joy.
When I run the BaUpgradeUt.exe I get a "connection error" saying check the physical connection between the phone and the computer. Also, BaUpgradeUt seems to close active sync once launched. The program then freezes unless I reopen active sync. I then get the connection error.
When I run the MaUpgradeUt.exe I get to the upgrade screen telling you that you are upgrading from ... to ... however the fields listing the various ROM versions etc.. are blank. If I click on upgrade, I get an error 150 saying "not designed for your device, please get proper ROM upgrade utility."
Any new suggestions for me ?
Missing my XDA very much as I use it a lot.
Thanks
I figured out the problem. It seems that the PDA was not responding to the ROM upgrade because the SD Card was in place. Origionally I thought this to be of no consequence as I only have a "dummy" card in the slot. I was wrong. Once I removed the Card everything went as it was supposed to.
:wink:
Stuck on bootloader
Hi all,
I copyed in fakt i did cut some files from my BA and moved to Storage Card (1Gb), and it restart byhimself and i am stuck on the bootloader. ??? Shall i rom Upgrad it ?
Howlingwolf

New To the recent phone pocket pc's

hi..i have a tmobile mda with the rom 2.26.10.x that i didnt know couldnt be cid unlocked...i found out after i upgraded which sux balls.lolz..i have a few questions...
1.What is the best rom i can upgrade or downgrade without bricking my mda...
2.why is the mda wifi reception bad most of the time resulting on always 1 bar for wifis around me...i even tried the wireless b mod.
3.I know your phone isnt dead if bootloader works but do ihave to use an sd with the rom saved on it in order to reflash my mda again...or can i just use an app that installs it via usb while bootloader is on?? <this one im definitely confused on... Please anyone help asap, thanks so much and much blessing
Here's an answer to part of your problem:
As long as you have a USB connection, you can re-flash your phone (provided it's in either the bootloader or connected to your system via active sync 4.1 (I don't know about the beta 4.5 of active sync - which changed the way your PC connects to your phone as I understand it)). You may have to try several different ROMs to re-flash, but generally, I have found that doing the following almost always guarantee's a re-flash:
1) remove the SIM card
2) after every attempt, disconnect the phone from your USB port and then reconnect it
3) between attempts, remove the battery while you are setting up your system (you can't flash a phone w/ a dead battery, so unless you have a way to charge the battery other than the phone, you need to protect the amount of charge you have like it's your lifeline!)
4) I have had more success re-flashing a phone that is in bootloader mode by using the original ROM .exe file instead of trying to extract the files from it and THEN run the update utility.
5) If your phone came w/ a 2.x ROM, I wouldn't try to downgrade it to a 1.x ROM as this has never worked for me. Try flashing it w/ a 2.x or higher ROM only.
Hope this helps (oh, and rumor has it you should use the USB ports on the back of your PC, not the ones on the side or front!)
Black-Wolf

cant connect in boot loader

Hi,
Im trying to upgrade to wm6 (tofclock version) on my orange spv1000 but when i go into boot loader it says that its connected to the computer but when upgrading it says it cant find it. In normal mode it connects fine but i believe it cant be done like that? im using vista
Any thoughts?
thanks
With vista there are certain issues which need to be addressed at the time of upgrade. see here --> http://buzzdev.net/read.php?64,29174,31817

Losing USB connection when trying to update ROM

Hi.
I have a Wizard G3. I'm running Windows 7 and therefore I don't have Active Sync, but the Windows Mobility Center. I wait until it says connected (no partnership) and then I run the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE file. The problem now is that it loses the USB connection a second after I tried to update the ROM. Phone remeins in Bootload modus and the custom ruu wizard crashes. Does anyone have an idea what might cause that?
Thanks.

Is HARDSPL an absolute requirement?

I am trying to HARDSPL my Tilt 2 and keeping getting not connected errors [264]. I have tried auto and manual. I placed the CAB file on the device and re-ran. I tried it in Win 7 and XP Mode. The deivce is connected, I can browse files thru the PC, Outlook is syncing, etc...
What will happen if I flash a new ROM without HARDSPL?
osu9400 said:
I am trying to HARDSPL my Tilt 2 and keeping getting not connected errors [264]. I have tried auto and manual. I placed the CAB file on the device and re-ran. I tried it in Win 7 and XP Mode. The deivce is connected, I can browse files thru the PC, Outlook is syncing, etc...
What will happen if I flash a new ROM without HARDSPL?
Click to expand...
Click to collapse
It won't flash at all.
Make sure you're running the file as administrator, other than that I have no idea what else you can try.
Hope this helps.
search for "enablerapinew.cab" and install
You need to post in the HardSPL thread, if you are having trouble with HardSPL
Thanks for the replies. I am making progress, but still not there.
I already had the enablerapinew.cab installed and I am using the manual flash method.
I "ran as admin" and it started the flash process. This time I got progress bars on-screen and on the device, but both stayed stuck at 0% until the flash utility timed out and walked me thru the recovery process.
I am using Windows Mobile Device Center 6.1.6965. It shows connected but drops the connection when the flash process starts. I assume this normal.
Any other suggestions.
osu9400 said:
Thanks for the replies. I am making progress, but still not there.
I already had the enablerapinew.cab installed and I am using the manual flash method.
I "ran as admin" and it started the flash process. This time I got progress bars on-screen and on the device, but both stayed stuck at 0% until the flash utility timed out and walked me thru the recovery process.
I am using Windows Mobile Device Center 6.1.6965. It shows connected but drops the connection when the flash process starts. I assume this normal.
Any other suggestions.
Click to expand...
Click to collapse
Hmm at least I helped a little, try updating the Device Centre to the newest, which I believe you acually.
A couple more things to try, one you need an active internet connection (can only assume you have this) and I found this on the HardSPL thread...
"if you get error msg for hard-spl program where it can not connect to device than use the cab that the hardspl program asks you to install on device: especially for tilt2 users.
Once you install the cab (on device), rerun the hard-spl program. DO NOT freak out as your device completely powers off. leave the usb cable plugged into device and computer and follow onscreen prompts."
Also make sure your radio is on (aka you have signal on your phone/it's not in airplane mode) and the basics such as the cable and the USB the device is plugged in to.
Once again, hope this helps
Problem soved. I published my answer in the Hard SPL thread.
http://forum.xda-developers.com/showthread.php?p=6518785#post6518785
Issue solved, Thread Closed

Categories

Resources