Hi,
Im trying to upgrade to wm6 (tofclock version) on my orange spv1000 but when i go into boot loader it says that its connected to the computer but when upgrading it says it cant find it. In normal mode it connects fine but i believe it cant be done like that? im using vista
Any thoughts?
thanks
With vista there are certain issues which need to be addressed at the time of upgrade. see here --> http://buzzdev.net/read.php?64,29174,31817
Related
I tried to update my rom and it was working, until my laptop turned off. (I forgot to plug in the power cord). So I tried it again, and it was stuck in bootloader and so I tried to update it using a Official Cingular Rom. But it gives me an error 260 saying cannot connect. I then tried to use mtty (one of the guides on here) but there's no USB option. I tried this on 3 different computers. Any suggestions please?!
To access mtty with USB option, you need to kill the wcescomm process (or disable USB connection in ActiveSync).
Thanks for the reply but I did kill it and disable usb connections. Stll no USB shows up. Im using a pretty new laptop with XP
Are you sure your Wizard is in bootloader mode when you start mtty?
It's always in bootloader mode when it's on since the Rom Update Failed ( computer turned off).
I really don't know why I have this problem. It was working before, but then it failed, and now it wont connect
Try to flash it on another computer.
I suspect there are problems on the USB ports (And/Or software issues) of your computer...
In my first post I said I tried to flash it on 3 different computers ( I meant laptops.) I dont know why it wont work now though. It worked yesterday
If it helps before it gives me the 260 error it says my USB device is not recognizable.
Please, does anyone have anything?
Im getting realy worried and my warrantys expired
help me stuck on bootloader
what do i do when i downloaded mtty? im am stuck on the bootloader screen due to a 98percent error but right now i cant do anything but stay on the bootloader.
I downgraded so im back to
IPL 1.01
and SPL 2.25.
HELP me get out this screen please? I've tried almost everything i could search on this forum. thanks in advance. and thanks for the hard work on the great roms you guys have!
Is there any other way to revive my device? I've been trying for the past 2 days and it's still not working
TheTop- Flash a official rom to it
I have tried official Roms like the one from the htc website, should I just keep trying even if I get error 260?
dunno if it helps, but make sure that you're battery is charged at least 50%. It seems to be one of the requirements that are needed when you normally flash with the RUU after activesync hookup. I know that when I tried flashing below 50%, the program wouldn't work for me and boot out.
if it's below 50%, look for a friend to charge it and try again.
So i'm a clueless noob and am trying to install Windows Mobile 6 using the "WM6 UPGRADE FOR HTC 3600 & ORANGE SPV M700 - AX3L OS v2.0.8.1" found on torrentz.com
Anyway whenever i try to install the os i'll eventually lose connection to my active sync and my device will no longer be recognized or conncected to my pc (i think it looses connection when the bootloader is prompted).
I'm pretty sure i am making a simple mistake that could resovle the situation but im not sure.
Also, has anyone else tried to use the same upgrade? is it safe and successful?
thanks for any help you can provide
when it loses connection, leave everything connected as it is and restart the update program... it's timing out when your device gets put in bootloader mode
I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!
NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!
mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji
brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?
I have been trying for almost 2 days straight to flash a new HardSPL then ROM to my Touch Diamond. I have done everything I can possibly think of but nothing works. I think the problem may be that I am using VMWare Fusion (on a MacBook Pro) running Windows 7. I can establish a connection with WMDevice Center perfectly fine, the RUU puts my Diamond into BootLoader and it says USB in the white area. However, after this step the status bar shows up on the computer for about a minute then I get error 26x (260, 266, 264....) cannot connect to device. I don't know how to work around this. I would just boot from the Internal Storage but I need to be able to flash a HardSPL before I can do this. I somehow was able to flash a new SoftSPL (I'm running SPL-0.64.000 right now). If anyone has any ideas about what I can do please let me know. I've searched the forum, done hard resets, tried JumpSPL v1, tried to boot a ROM from Internal (can't without updated HSPL), everything. I'm out of ideas.....
Im having the same problem i almost slammed mines. At first the activesync use to come out now it doesnt even do that some choose what to open with box comes out. This phone does things random i have no idea why. Everytime it connects i press the update to install the new windows 6.5 on it and the the sound of it disconnecting shows up then it sounds again and then the screen says usb and then on my computer it says theres no htc connected so i wait to see and i get a error after 3minutes of waiting then i got to reset. Its getting me real frustraded.
Hi.
I have a Wizard G3. I'm running Windows 7 and therefore I don't have Active Sync, but the Windows Mobility Center. I wait until it says connected (no partnership) and then I run the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE file. The problem now is that it loses the USB connection a second after I tried to update the ROM. Phone remeins in Bootload modus and the custom ruu wizard crashes. Does anyone have an idea what might cause that?
Thanks.