I have upgraded my i-mate PDA2K with de file (from i-mate web site) BA_CDL_12203_ESN_177_10600_SHIP.exe a few weeks ago and everything went right, but a few days ago I had problems with the phone (I couldn't receive SMS and no GPRS connection could be stablished) and after a warm start, the blue i-mate screen showed "No GSM" instead "R 1.06.00" so I decided to re-install de update file. This second update process stops with "ERROR 114 – RADIO ROM UPDATE ERROR" when it's trying to update the radio ROM. I have tryed to install the last radio rom version (1.10.00) and the previous one (1.02.00) with no success at all, always the same ERROR 114....
If I install only the ExtROM the device comes to life and the phone seems to work but GPRS doesn't work and when I try to upgrade or simply reinstall only the radio ROM I always get the same ERROR 114....
Could anybody help me to fix this error? I would like to upgrade to the latest version and get my PDA up and everything running.
Thanks a lot.
yes please any body say why Error 114 ?
I cant update my IMATE T-MOBULE with USB, I see error 114 in differend percetanges
thx
Popito
1) Have you tried the 1.12 of wiki and have you fixed it with the fix.bat as per getiting started on wiki ?
2) are you saying that the install of the BA_CDL_12203_ESN_177_10600_SHIP.exefails even though you were able to instal it in the past.
Related
Hi guys, I hope you can really help me out.
I have an O2 XDA IIs which I just tried to upgrade. Now during the install it comes up saying "ERROR 114" saying that there was an error installing the upgrade.
Now my problem is the phone just sits there with Serial 2.07 on the screen .... i've tried running the upgrade program again (the screen where it says what rom you have, and what you are upgrading to, it's blank in the current rom) but I still get the same error every single time.
I'm trying to upgrade to;
CE Image version 1.40.00
Extended Image Version 1.40.923
Radio Version 1.12.00
Can someone please give me some ideas as to what I can do to get this working again?
Many thanks
Damien
sounds like the country id error, have you tried the MaUpgradeUt_noID file???
this usually fixes this. 8)
Hello,
i have a
PDA2K i tried to upgrade it & now it's stack on the boatloader
i tried to upgrade the radio first when i got the message
ERROR 114
then i treid to full upgrade the ROM & Radio
I got the following message
ERROR 120: Country ID ERROR N-N-12-12-12
So what should i do.
Please help.
I never got this, but TRY using the Magician No Country ID upgrade files. You can find them inside the upgrade files for WM5 (I don't know if they're available anywhere else)
hello i have a qtek 9090 but my wm6 rom didnt work anymore zo i ceep gettig
stuck in bootloader mode
but now the problem when i want to get it working agian but when i start an upgrade it wil work for 7 to 98 % and then the upgrader says ce upgrade faild and windows says that my device is disconnected
so the problem is i cant get it upgraded.
can someone give me some advice
are you receiving the Error 112? if you are then i found this posts from another thread it is titled Error 112 CE ROM Update Error it mentioned requiring a clean pc setup.
i hope that works.
mine is able to complete the process but then the wm6 is the same....same contacts same programs...no difference...dont understand
Hi Guys, I have bricked my Cingular branded BA Siemens SX66 PH20B. I am getting the no GSM error, I have read the WIKI and read the thread that follows Help, my device shows "No GSM" after upgrading, and I can not perform any more ROM upgrades Link. I have tried the steps and nothing seems to be working, I guess I must be a complete noob but i have spent hours trying to get the radio to install and nothing will work. I have spent 6 or 7 hours looking on here before i requested help I was running the radio unlock when a tree took out the power line to my house. I edited the ruu.conf and that didnt help I ran the MaUpgradeUt_noID.exe and it will update my rom with no problems at all it just hangs at the radio install and wont go anywhere i get a "Error 114: Radio update error" If someone can help I would appreciate it.
Might help.
I'm not quite sure about your problem but I did get the same radio update error couple times. One thing that I had to do is to let my computer (active sync) recognize my device first. After that the redio update error is gone.
I got it fixed, what i did was install an original rom from seimens that i got at SX66 (Blue Angel) Standardization Project, itfixed the radio error and then i could reinstall the updates
hi guys,
here's my problem:
i was trying to upgrade from wm5 to wm6 everything went fine, except that i couldn´t install any radio rom. so i wanted to downgrade to wm5 but i´ve got the same problems there, too.
i can start the update process of the radio and it works until 32%, then i get this error message: error 114: radio rom update error
does anybody has any solution?
Thanks
P.E.C.K