conection lost during upgrade - MDA III, XDA III, PDA2k, 9090 Software Upgrading

hello i have a qtek 9090 but my wm6 rom didnt work anymore zo i ceep gettig
stuck in bootloader mode
but now the problem when i want to get it working agian but when i start an upgrade it wil work for 7 to 98 % and then the upgrader says ce upgrade faild and windows says that my device is disconnected
so the problem is i cant get it upgraded.
can someone give me some advice

are you receiving the Error 112? if you are then i found this posts from another thread it is titled Error 112 CE ROM Update Error it mentioned requiring a clean pc setup.
i hope that works.

mine is able to complete the process but then the wm6 is the same....same contacts same programs...no difference...dont understand

Related

ERROR 114 – RADIO ROM UPDATE ERROR

I have upgraded my i-mate PDA2K with de file (from i-mate web site) BA_CDL_12203_ESN_177_10600_SHIP.exe a few weeks ago and everything went right, but a few days ago I had problems with the phone (I couldn't receive SMS and no GPRS connection could be stablished) and after a warm start, the blue i-mate screen showed "No GSM" instead "R 1.06.00" so I decided to re-install de update file. This second update process stops with "ERROR 114 – RADIO ROM UPDATE ERROR" when it's trying to update the radio ROM. I have tryed to install the last radio rom version (1.10.00) and the previous one (1.02.00) with no success at all, always the same ERROR 114....
If I install only the ExtROM the device comes to life and the phone seems to work but GPRS doesn't work and when I try to upgrade or simply reinstall only the radio ROM I always get the same ERROR 114....
Could anybody help me to fix this error? I would like to upgrade to the latest version and get my PDA up and everything running.
Thanks a lot.
yes please any body say why Error 114 ?
I cant update my IMATE T-MOBULE with USB, I see error 114 in differend percetanges
thx
Popito
1) Have you tried the 1.12 of wiki and have you fixed it with the fix.bat as per getiting started on wiki ?
2) are you saying that the install of the BA_CDL_12203_ESN_177_10600_SHIP.exefails even though you were able to instal it in the past.

problems ugrading to wm5

hi all, i have been looking and asking questions all mornin on how to upgrade to wm5, so i downloaded needed files, hard reset my xdaIIs and run rom, with the baupgrade rom i get error 103 and with the maupgrade it runs for 20 secounds or so, says its comlete and to do another hard reset, and when i have done this nothin is different, please tell me where i am going wrong,
My device info is
rom version 1.40.00 WWE
protocol version 1337.42
Extrom 1.40.237 WWE
I take it my xda is still standard?
Thanks
Alan
wiki
pls read wiki
you need to formate the device
camera+recoder button thing
i did exactly that and had usb come up on screen but still no joy.
Cheers
hey
regarding the the maupgradeutnoid.exe, when your using it for the vry first time, you have to disable activesync first, put your device into bottloader mode, and put it ine the cradle... you could here a sound, wait till the device would be recognize and wait till a popup message telling you that the new device installed is ready to use and that's the time where you run the maupgradeutnoid.exe otherwise you'll keep on just getting that message that the upgarde is finished, well actually nothing has happened.
since, its your first time attempt of upgrading to wm5, you can use baupgrade.exe but be sure you have set the corect operator for your device. to know what is your operator info, just transfer the getdeviceinfo.exe to your device and run it, this .exe will generate devicedata.txt found in the windows directory of your device. tranfer it to your pc and read it from there, in my case I have an imate, my operator is CDL_01, remember this coz you will neede this when your upgrading to wm5.
in any rom that you can download in this site, there is an included bat file, setoperator.bat, and enter you operator info, after that your ready to run baupgradeut.exe with no problem... read the wiki for better understanding.. alwaysssssssssss read..............

Attempted WM5 Rom upgrade and got stuck!!!

Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx
Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?
I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06
Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.
thanks a lot i ll try it right now been waiting for this
OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you

Need HELPPPP plzzz

hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'

Can't upgrade I-mate PDA2k!

I need to upgrade my i-mate but the RUU gives me the Error 120: Country Code Error...
Anybody can solve this?
-Thanks!
put your device in bootloader mode before connecting, and use maupgradeut_noid. that question has been asked and answered hundreds of times, please search the forum next time you come along a problem
In order not to multiply the topics:
I have succesfully upgraded my Tmobile MDAIII to Win 6.1 via the mentioned above method. And now I want the start-button-in-the-bottom
So I downloaded the image file, put MDA into a bootloader, plugged it into craddle, started maupgradeut_noid and... the second screen didn't show any data about the device. (in FAQ "something went wrong, start over again" is advised). Several attempts were of no use. The fresh XP SP3 also didn't help. What is wrong??
By the way, the official upgrading software (that one that shows Invalid country ID later) does show the device info screen correctly.

Categories

Resources