I installed the ROM v1.40.533, but now my ActiveSync application is gone :?: ... It works when cradled but the program icon to manually start it is no longer on the BA. I tried reinstalling the update but nothing help.
HELP!!!!
I have the same problem since doing a corporate reset on mine. I even tried copying it over from another XDA but it appears to be a protected system file
Has anyone got the name of the app ? I'm having this problem too
Related
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
I am also having activesync issues.
No Ideas?
Is there a reg hack anyone can think of? My bigest issue is not being able to uninstall/install anything!
Please specify more on the active sync issues? You might have to do a hard reset, or else this problem will stay. And are you talking about the ROM built apps or apps you installed your self?
gehcmatt said:
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
I am also having activesync issues.
Click to expand...
Click to collapse
I have had the same problem twice already.
The first time I did a hard reset and started from scratch, the second time (this week) I just restored a backup I made with sprite backup and everything was working again
Just make sure the backup, (you do have one don't you) was made when the remove programs still showed the programs that were installed.
active sync issue
when I connect the tilt to my laptop active sync on the computer sees the tilt but I cant sync. I can explore the tilt. When they connect the computer says close to the following, "Sync cannot be completed sucessfully. Reconnect your device and try again. If the problem persists see active sync help." I click ok and a new profile is create each time.
Now for what active sync says on the tilt. It says, "To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC.
IF you company supports syncing directly with its Exchage Server you can set up your device to sync to it.
Learn more about synchronizing with a server."
The Sync button is greyed out as is options.
O ya, I did do several sprite restores from as far back as one month, (I do a backup at least twice a week) and still the same issue.
Any ideas?
gehcmatt said:
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
Click to expand...
Click to collapse
Your registry is corrupted and the solution is a hard reset and then reinstall of your add on programs.
I've seen this several times on the Wizards. I've also seen the same problem in Win 2000 and Win XP.
If my reg was currupt, couldnt a restore fix it? I have tried that to no avail.
ive had this issue before, Just delete the partnership and create a new one/ restart computer(had too for my case, maybe it will help yours).
gehcmatt said:
If my reg was currupt, couldnt a restore fix it? I have tried that to no avail.
Click to expand...
Click to collapse
The problem is more then likely that your backups all have the same problem in them.
The only solution I could find is to do a hard reset (clear Storage) reinstall all apps etc, make a backup and keep it in a safe place then make another backup whenever something is added or removed, just make sure that all programs show in the remove programs screen before you make the backup, otherwise a restore will not help.
Another observation I have made is that each time it's happened to me I've either dropped or banged the PDA.
Thanks all for your help. Say if I do a hard reset and then do a restore from a backup, will I have to Reinstall all the software? The reason I ask is that I bought this phone used on ebay and it came with all the software loaded. There are a lot of programs and I cant find the installation programs on the phone of sd card.
gehcmatt said:
Thanks all for your help. Say if I do a hard reset and then do a restore from a backup, will I have to Reinstall all the software? The reason I ask is that I bought this phone used on ebay and it came with all the software loaded. There are a lot of programs and I cant find the installation programs on the phone of sd card.[/quote
You will need to reinstall all of the software first, and then do a restore.
BUT as I have said, if the backup is the same as the PDA ie: no programs listed under uninstall it won't help, you will need to reinstall everything again.
Click to expand...
Click to collapse
Moved this question to a new thread. Still need help with this issue! Thanks
Specifically what is the current problem?
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
i hjave the same problem!!!!!!!!!!!
Very strange - I have the same issue and it just started today. Installed software won't run and I can't install any cabs. Just says it was unsuccessful.
Anyone?
try downloading pocket mechanics, it shows all programs installed and a clean up tool and see if it shows it there, u can delete them through ur program files....see if that works lettme kno how it goes
Tried soft resetting a few times - nothing. Backed up device to my storage card using Sprite Backup and did a hard reset.
Before restoring I tried to install a cab - worked.
Restoring device now from backup....
After restoration installation of cabs - Unsuccessful. Must be sometime in the registry/system?
My question - what did we do in common to get this problem?
Today I swapped SIM cards with another AT&T phone and then put the original one back. I also ran the JumpSPL1.56KAIS on the device but reset at the tri-color screen due to a lack of time.
It is very frusterating as I dont know what to do. Any since I cant load any programs like pocket mechanics I dont know what else to do. Backups didnt help and I know the ones I had a month back showed the programs listed in the Remove Programs tool. THERE MUST BE A REG HACK THAT WILL FIX THIS! Anyone?
The last programs I installed before this happned was the Resco explorer.
Also I have a activesync issue that started about the same time which I have in another post.
I ended up hard resetting it again and am just re-installing everything.
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
i get that issue every now and again. I usually have to either use a different file explorer or do a soft reset and try again.
Thanks for sharing
i have found the solution finally
the current ROM doesn't support the CAB file i was installing,
i needed to do the following:
remove the SD card
reinstall the compatible ROM which support the CAB file
i hoop it it heps other they may had the same issue
reinstalled rom...
still problem continue
has a other solution?
I recently had this problem when trying to install a couple of CAB files. It appears that something was running that the CAB was trying to update. So, for example, I was trying to install "Inbox Extender" and POutlook (and/or tmail?) was running. Once I killed that, I could install the CAB.
CAB won't install suggestion
I saw this with several cabs that I ran using Resco Explorer and I had Kaiser Tweaks set to not delete the cab after install. The solution was to deselect that setting in Kaiser Tweak, ket a fresh (never run) copy of the cab file and run it using the generic file explorer. It has worked every time since then.
Acert_Arb.cab is no more working
NightStar404 said:
Hi all,
I am facing a weired problem,
I have installed an application, it was installed very well, with no problems at all.
But when i flashed it with a new ROM, i have tried to installed that application again, i keep getting:
Installation of 1 ACERT_ARB.CAB was unsuccessful
shortly the whole package doesn't get installed at all.
I went through the program files, deleted any old stuff, tried to reinstall, but the same problem
i have put the old ROM back, but still no luck
am i missing something here? any advises please?
regards
Click to expand...
Click to collapse
hello buddy,
Microsoft has made ACERT_ARB.CAB for limited time I think so. Now Microsoft has decided to claim $ for their OS windows mobile. They are working with www.penreader.com
ACERT_ARB.CAB is no more working.
visit this for more information:
http://social.microsoft.com/forums/.../thread/fa78dad9-7ede-472a-af0b-1f8dddaf7900/
http://www.penreader.com/pocket-pc/arabic/Language_Extender_Arabic.html
I cant install anything, .exe, cab, nothing. Please help!!!
I also can't install and run any .cab , .exe or haret. help us
last thing i attempted to install via ActiveSync is the Microsoft WM Update - KB958639
now my kaiser is rebooting after i enter the startup pin password.
it doesnt seem to have installed the update. it loads the today screen with manila 2d and then begins the cab install process but then resets. it keeps doing this.
i can still sync with outlook/active sync, access files via the PC, etc. if i dont put in my password on the phone to unlock it...
i tried to delete the update from the \windows\appmgr directory but it tells me access denied.
any other way i can remove these files or stop the installer from loading during the next reset? i'm lookin into a reg location that it might have startup entries for this sorta thing...
ok nm, i solved it. the ActiveSync add/remove programs tool allowed me to uncheck the app from install. was weird, cus before it was already uncheck.... oh well all is well
I installed Icone demarrer.cab to change my start icon which worked. But know I cant sync my phone to my computer at all. Any ideas???
I've installed the same cab and no problem. It has nothing to do with active sync. Now try to delete association and re establish association.