Database Develop

Having problem after radio upgrade from 1.02 to 1.06.02

I have a O2 XDA IIs. I can't figure out what I did wrong. After the upgrade, no sounds comes thru speakerphone when I receive a call and call out. This happaned after I used the phone for like a half a day without soft reset. Once I soft reset the unit, it went back to normal. I tried going back to 1.02, but the problem remain.
Here is how I did the upgrade. I extract the xdaIIs_launchROM_v1.12.62_178; remove the files ms_.nbf, nk.nbf and radio_.nbf in the directory; downloaded the french 1.06.02; Put just that ROM into the directory. Start BaUpgradeUt and it indicates the old version and the new version and the upgrade went smoothly without any error.
I did the same thing to go back to 1.02. I tried install all my software from scratch without using the backup, but the problem remain.
I read thru most of the thread and saw there is a tool called xda3nbftool. Do I need to use this?
Appreciate anyone can help!!!!

That tool is only needed if you are trying to do none same carier upgrade.
Thus I would need it as to use the o2 rom on my T-mobile I would need to fix it with that tool and a fix.bat (wiki, getting started)
In your case you are doing a same carrier upgrade.
This should work out of the box (as in run the ship exe).
Most of us have done a radio only upgrade using the 1.06.02 FRA, and have not had any problems.
In your case I would reflash using the launch rom, try it out an you might have a hardware problem.
What I read that you did looks correct.
Only thing I am not sure is did you do a Hard reset after the install ?? But I am sure you did.

Your problem is not the upgrade, I had the same problem when I was using 1.02 radio rom and THAT'S WHY I upgraded to 1.06.02.. The problem seems to be random so far and there's no real fix as far as I know. Do a search, you're not alone with this problem...

I have that problem too when using 1.02, but after flashing to 1.06.02. This problem did still appear twice - I think this is the signal reception problem. You might try to notice that whether this happens always in the same area you are in.

Thanks for all the input. I did not have this problem before I tinker with the Radio ROM. So, I am thinking this may actually related to the ROM flash. I don't think it's related to reception since my provider coverage is very good. I am giving it another try and may ended up sending it in for repair. Having to soft reset every few hours is not fun.
Regards,

leochan2005 said:
I have that problem too when using 1.02, but after flashing to 1.06.02. This problem did still appear twice - I think this is the signal reception problem.
Click to expand...
Click to collapse
I also had this on 1.06.00 and 1.06.02 radio. After upgrading to 1.33 main ROM (from Siemens SX66) I have not noticed such problems. I've also noticed that you'll never have such a problem whan you have a bonded headset, even when headset is powered off.

mamaich said:
leochan2005 said:
I have that problem too when using 1.02, but after flashing to 1.06.02. This problem did still appear twice - I think this is the signal reception problem.
Click to expand...
Click to collapse
I also had this on 1.06.00 and 1.06.02 radio. After upgrading to 1.33 main ROM (from Siemens SX66) I have not noticed such problems. I've also noticed that you'll never have such a problem whan you have a bonded headset, even when headset is powered off.
Click to expand...
Click to collapse
mamaich, I think you are correct. I tried this yesterday by bonding my bluetooth headset which I did not do after the radio ROM upgrade. So far, the problem does not re-surface using the phone for more than 12 hours without soft resetting. What else does the 1.33 main ROM change?

that problem appear 4 times today. When a number get connected, time started counting, no we could not hear each other. Each time I need to soft reset.
Also, using Spite backup 3.14 to recover previous backup including mms and sms, mms cannot be received any more (I sent myself one), but sms ok.
My god! hard reset again....install everything again.

ok. some update. It happened again even I have the bonded blue tooth device. I notice however, if I go activate bluetooth and disable it, it comes back to normal without soft reset.

It seems no one can find out what is happening on the radio of XDAIIs

Having to reset Qtek daily cause I don't hear the one I call

Hi
I have the newest firmware version installed on my Qtek 9090 (BA_WWE_14000_147_11200_Ship), and I experience a problem again which I had first when I bought my Qtek but was gone after I had installed Radio version 1.08.00:
Once a day I have to reset my Qtek because I can't hear the one I am calling - usually this happens when I call my mobile phone's answer phone. The phone gets connected but I don't hear anything. After a soft reset everything is fine again.
Is this a known issue? Any solutions to it? Ok - I know I can downgrade to 1.08 again but I dont really wanna do that. And yes, I can stop calling my anser phone ....
Anyone knowing what is causing the problem?
Reagrds,
A

I had the same problem with my Qtek 9090 until I stopped use the Bluetooth feature completely. Since then, everything is fine.

tot 1.12 radio has solved the "no sound" issue.

keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet

ThExSenatoR said:
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
Click to expand...
Click to collapse
i have tried 1.06 & 1.10, all are having that issue. that's why i have upgraded to 1.12 so far so good. umm.....................strange..

keeping_sg said:
ThExSenatoR said:
keeping_sg said:
tot 1.12 radio has solved the "no sound" issue.
Click to expand...
Click to collapse
I cannot verify this, i have an mda3, upped it to R1.12 but i had many "no sound" problems. Now i downgraded to R1.10 and had not a single no sound issue ..yet
Click to expand...
Click to collapse
i have tried 1.06 & 1.10, all are having that issue. that's why i have upgraded to 1.12 so far so good. umm.....................strange..
Click to expand...
Click to collapse
For me, radio 1.12 delivered:
- worse signal reception
- higher battery consumption
- still no sound issue.

flashed twice & still having the bloody "no sound" issue. really give up. i think the next thing to change is the motherboard. sigh.........................

I had never had this issues untill I upgraded my Radio to 1.12 and then I had it 5 times in one day, went back to 1.10, no more issues

Hmm. This is a really 'odd' problem. I didn't originally have this problem with my SX66. Then, it just 'popped up' one day, and I can't seem to get rid of it.
I have tried different ROM versions (currently 1.40), and my radio version is at 1.10.
I have NEVER used radio 1.12, so I know that's not the CAUSE.
We need to compile a list of people with the problem, and see exactly what combination of ROM and Radio they have, as well as the programs they have installed.

if you read the cingular forums, there are a few folks there that say they have had it all along so I am not sure where to start...

umm....... different ppl have different problem. seems like it's a integration issue.

If you go to some HK forums, you will also find a lot of people suffering from this.
To me, I seldom use it as a phone. I only use it to receive emails and website browsing. When I go overseas and I used it as a phone with a BT handsfree (shut down GPRS connection), everything is just fine. I only encountered once with no sound problem when I take away my BT handsfree on a plane....
It's definitely a bug since a long time ago with old and new versions.....
Sad....and disappointed......

Hi all,
I upgraded my phone to the 1.12 radio along with the 1.40 CE ROM and am always resetting due to the "can't hear caller" issue and I never had this problem before.
I'm going to do a hard reset and see if that helps (clear out all the apps and use it for a day or so). If this doesn't work, I shall revert back to the 1.10 as I had no problems with that.
ROM 1.40.00
Radio 1.12.00
EXT ROM 1.13.139 (with Updated CallerID [1.20] and older version of O2 Active [3.0])

This cant hear caller issue, is it cant AT ALL hear caler or caller is so faint I cant hear him.
I ask as sometimes I get calls that are faint however when the caller rings back it fine. Not sure if its crap reseption or the device.

I got O2IIs from UK and had the same "No sound" problem. I have to SR about 5 times daily to sort it out. However, if I turn off Bluetooth (pairing with my Bluetrek G2) then everything's OK.
My ROM version is 1.31.00 WWE, Radio : 1.10.00, ExtROM: 1.31.139 WWE and BT 1.0.0 Build 3500
Had up to BT 3900 but wont help. Gonna up radio to 1.12. Will post the outcome soon.

I've only experience the problem once since the imate 1.40 upgrade.
Now, I must say that I don't use the phone THAT heavily.

I upgrade to 1.40 EX, it seems working fine, still the sound quality is not good enough...

people!
A guy called Derek has posted a possible solution to this problem here! http://forum.xda-developers.com/viewtopic.php?p=118364
It involves removing the Bluetooth for the startup because he believes that even with the bluetooth off, the unit is still trying to connect to a bluetooth headset.
I'm going to remove/unpair my Bluetooth Headset and see if that makes a difference. If anyone else can try this and post results I'm sure this would help loads of people.
Dom

Please confirm this and I will post it to wiki

@xdadom,
It's correct. As I mentioned in my post, when I "turned off" Bluetooth, everything's OK. The way I "turned off" Bluetooth is exactly the same with Derek did in his post, i.e. delete "Run_BTTrayCE" from Windows\StartUp\
However, I still need Bluetooth for my hand-free device. In my opinion, it's rather a trick, not a solution to kill "No sound" problem. Anyway, we can wait the updated BT version from supplier to sort it out.

PLEASE HEEELP!!!! NO SOUND on my BA on calls ... :(

I'm having the same problem for a week now...
I was on the street with my BA making calls and all went Ok. I use it for my work, so I do lots of calls a day. Suddenly, I realized, when I call, that the other can not hear me, nor can I hear them! The counter is running, the screen says "Connected". I haven't done anything to change the configuration, nor it have dropped it from my pocket.
I'¡m getting crazy. I don't know what I've done wrong.
Things tried unsuccessfully: Crying or Very sad
-Lots of device resets..... Between tryes and Updates.
- Reinstalled WM5 using a different ROM. Now I have TM 1.3. [http://forum.xda-developers.com/viewtopic.php?t=42632]
- Upgraded Radio to 1.15 (previously, I had 1.13)
- Used a Bluetooth headset. It worked, I could hear the sound from the phone, at least. Only thru the bluetooth headphone. Still, I could not hear any phone-sound from the loudspeaker when I turned off the headphone and the bluetooth headset were disabled, even with the Bluetooth signal ON, as suggested on other post. Each try with a new call. The weird thing is that I CAN hear the loudspeaker when I hear music or the system sounds... :?
- "Installed" the Unidirectional patch (copied the AudioGW.dll file over the old one successfully, reset, etc..)
- Turned off the device and leave it off for a while. Take off the SIM card, touch it (cosmic vibrations Embarassed) Sometimes, before, the SIM card went a little nuts if I resetted the device too much -maybe Confused- or if I got the battery off...
- Last, I've downgraded to the latest WM2003 ROM. Formatted the Storage Space and resseted the Registry Hive. No change. All else is working.
My options are finishing ....
Sorry if this has been posted before, but, at this point, when I've been tried almost (I think) everything, i couldn't find anything relevant using search.
Please, any help will be greatly appreciated!!! Maybe I can use at least a link to another thread..
Thanks

try downgrade your RADIO to 1.13

I've allready upgraded to 1.15 because of this problem. Anyway, I've downgraded just now and nothing same problem..... also: I can not get the handsfree-loudspeaker mode (pressing the "call" button for a while). Just nothing happens
Let's hope mamaich or other cracks read this post
Thanks for ur answer
indra9110 said:
try downgrade your RADIO to 1.13
Click to expand...
Click to collapse
HEEEEEEEEEEEEEEEELPPPPPPPPPPPPPPPP ((

ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO

Rom & Radio flashed again. At no avail
I've used, lastly, the "standard" Rom posted on I-mate website (www.clubimate.com) [ROM: 1.40.00 WWE; Radio: 1.12.00; Protocol: 1337.42], just to checkout and everything (regarding this problem) remains the same.
I've, however, noticed that, before, when I used the volume slider up, first the PDA-volume went up, later the phone-volume. Now it only fully moves up the PDA-volume. I think this have something to do...
Again: Please, help me!!!
Thanks for your answer!!
indra9110 said:
ow... DONT PANIC !!! try flashing once again ... including ROM & RADIO
Click to expand...
Click to collapse

Still the same after 3 flashing sessions
Two days ago, I've sent an e-mail to I-Mate. They have answered me yesterday telling me to hard-reset :?:evil: and if that doesn't work, to send the device to France or Portugal for fixing. Here on Spain there's no place where to send it.
I think it should be a software problem (maybe) that's why I'm asking help here.. Also, the problem with the volume slider up only occurs on W2003, not on WM5
What should I do??
Anyone?? HELLOO?

i've had this problem for a long time, and tried so many different patches non worked, but there is a way to deal with this issue u need to keep ur bluetooth on all da time or remove the file BTTrayCE from this directory
Mydevice>windows>start up
and copy this file to ur storage card if later u want to use ur Bluetooth so wat removing of this file does is that the icon in of bluetooth in tray bar will not appear automatically after u restart ur machine .
hope this helps

At no avail , but many thanks anyway.
I've seen this solution on other posts and I've tried it before. Without luck
Even the 'bluetooth on all the time' alternative. Without luck
Also, I'm now on TuMa 1.3 (WM5). The file relative to bluetooth on the startup folder is "BTIcon", wich I have moved as you stated. Without luck
Maybe the file you tell is for WM2003 ?? Could it be? Is the file named 'BTTrayCE' on WM2003 and 'BTIcon' on WM5?
I'm really desperate.
arran83 said:
i've had this problem for a long time, and tried so many ...
Click to expand...
Click to collapse

umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.

ok here is a patch that is supposed to fix this problem but hasn't worked on mine, i just attach it here it might work on urs, or u might already have used it.

Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone.
I had a similar problem sometime back, and just put the headphone jack in there, jiggled it a bit and it started working. basically released the switch. your symptoms point to a similar problem...does not have anything to do with Radio ROM. Has not given me problem since then

here you go..
http://forum.xda-developers.com/viewtopic.php?t=33207

Yup, I've seen this forum before. If it has to do with a headphone problem, then It shouldn't be heard anytime, and I CAN hear music and such from the device when it isn't in a call. Anytime I put the device on the "call" state (dialing, connected, hold, etc..) the sound goes out. :-S
So, it should not be a headphones problem.... should it??
deepakr said:
Sometime back, I had come across a post on a similar problem. I think what you have is a erratic headphone jack..I believe there is a micro (?)switch in there which connects headset and disconnects speakerphone...
Click to expand...
Click to collapse

Yes, I will, for nth time... No solution yet... I will apply the Unidirectional patch again on WM2003 to see... Keep you posted..
arran83 said:
umm yeah i'm sorry, mine is running WM2003, maybe u should try downgrading to 2003 as well since i've done it and now i'm having less problems, i really don see much of advantage in using 2005, good luck.
Click to expand...
Click to collapse

OK, I've tried, for nth time, going back to WM2003SE (112 T-Mobile) and applying the unidirectional patch I've found here (I think is the same posted on the I-mate site I've tested before) and NOTHING changes...
Still the same problem.
Any clues?

hi !
try like me... in bt setting-->accessibility-->disable all access options..
to me this little trick cut off every problems on use the phone....
hi

OK, I'll give a try :? (Again going to WM2003, as I think is that what you have right?)

No Sound on BA
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?

Re: No Sound on BA
I can not turn on the speakerpone.....
pjax said:
Hi there. Have pda2k, rom-1.40.00, radio-1.12.00. Have previously lost sound during call. Can be heard but cannot hear. Phone have been exchanged under warrantee, but new phone developed same problem after using BT to connect with PC. Currently I turn on the speakerphone in order to converse. Any help?
Click to expand...
Click to collapse

I also have a similar problem - when in phone mode, other side can hear me but i cannot hear them, if i plug a headset with microphone the other side hear me and i also have sound from other side.
if i unplug the headset, i cannot hear the other side but the other side can hear me.
are there microswitches inside the headset plug for both microphone and speaker (two microswitches) ?
thanks, yol.

Problem with WM5 on BA - No Radio...

Hi
Tried looking through all the threads and checking what I have done but still no joy hence post.
Have upgraded my old BA PH20B (I have another one so no panic) to WM5 with the latest WM2k5_AKU3.2_32mb_v1.3.2 setting Operator to ORANG001 (Orange UK).
1st time I tried everything seemed fine except although I had a signal from Orange I couldnt ring the phone (went to answer machine) and if I tried calling out the call disconnected with 0min 0sec calltime. I did receive a text message saying I had missed a call (me calling phone to test). But couldn't make or receive calls.
So I tried again from scratch twice and both times I have no signal and in Device Info have "Radio version: NONE" - followed instructions to the letter anyone any ideas?
Cheers
RichardC
ps. I can re-flash ROM OK.

this happened to me, too. but only when i changed batteries...
try to soft reset until the word NONE is replaced by the radio rom version (during boot up).
good luck!

Thanks for that, did soft reset and suddenly I have a radio ROM, so removed battery and inserted SIM then no radio again. Soft reset and radio back...weird
Now I can make calls and receive text but can't call phone (engaged or answerphone, maybe network I guess) but also GPRS connection info wrong so guess better start searching for info on that now. lol.
Thanks for the tip.

Check out my signature - use the links provided.

_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
Makes sense thanks...just the GPRS issue now. lol

Just stepped through GPRS settings not changing anything but clicked OK at the end and it works now. Looks like install didnt configure everything fully.
Weird issue I now have is dialling out cancels and yet the phone I dialled rings about 10 seconds later (very weird).
When receiving a call - nothing happens on the BA, no ringing down phone calling out from then when the network drops the call the BA makes a small burp sound. So it knows it should be ringing but something is stopping it.
Tried upgrade to 1.15 Radio ROM - same. So now going to try downgrade to original WM2003SE Radio ROM version (1.06) and see how that goes unless someone has another bright idea?

same issue here
I am now experiencing the same issue, suspect its battery related though...hope someone can come up with something better than that. :lol:

_TB_TB_ said:
Check out my signature - use the links provided.
Click to expand...
Click to collapse
You'll need to update those links for the new forum it seems.

Tried everything but although it all worked phone usage was inconsistant. Sometimes calling out works, sometimes just drops call with duration 00:00. Sometimes receives a call, other times goes straight to voice mail or un-obtainable tone even when signal fine and 2nd BA running WM2003SE works fine (same operator, Orange UK). Bluetooth also needed re-boot most of the time to be enabled. So reverted to WM2003SE for now .

just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00

hirsty said:
just for comparison i have an xda iis that works fine phone and all and im in wm2k5......except cam doesnt work lol gunna fix taht later .....i used radio version 12.00
Click to expand...
Click to collapse
Thanks for that I tried 12 and then finally went back to standard WM2003SE radio version out of desperation. Nothing worked.
When I have the energy! I may try upgrading my other (newer) BA to see if that helps but first I need to backup my current ROMS as it works faultlessly under WM2003SE...why am I thinking of upgrading I ask myself

Alhumdulillah
everything is working fine for me
AKU 3.2 owns
CAM is fine
ricardo there must be some other problem i hope u didnt drop the phone too many times
looks more like a hardware problem to me

Hi
Phone is 100% OK with WM2003SE, so not a hardware issue...may try again soon, thanks for input.

where can i find 2.47.11 radio rom to download

i went from 2.19 to 2.61 but not any better. can someone forward me the link to download 2.47.11 radio rom cab file?
i tried to search but when i put in the search field 2.47.11 radio rom, 21 pages of related topics pop up and i can't find anything in terms of downloading this rom.
thanks, m3m3

http://forum.xda-developers.com/showthread.php?t=279380

xeno1 said:
http://forum.xda-developers.com/showthread.php?t=279380
Click to expand...
Click to collapse
hey xeno,
seeing that you are senior member, i have some questions for you.
how do you like 2.69 rom? here is my situation that i am running into with my 2.19 radio rom.
i cannot receive signal in my house but as soon as i walk outside, it get 4 bars but it takes awhile to recover. i tried 2.40 before but during a call, i could not switch over with call waiting and sometimes, when i call my voicemail, i could not hang up. so, i went back to 2.19. 2 days ago, i installed 2.61 but i don't get any better signal strength than 2.19. but with 2.61, i am experiencing the same problem of not being able to hangup during a call or navigating through my voicemail box. it seems as though it doesn't recognize any button inputs or touch screen inputs.
i bought a longer lasting battery for my MDA so power drain is no issue. the main issue is reception which i will trade off with battery life.
my question to you is are you happy with 2.69 with regard to reception and recovery of lost signal?
maybe i should try 2.69...can you point me to the download?
i am running SPL 2.17/IPL 2.17 on Faria's Crossbow
thanks in advance.
-Mike

2.69 isn't bad, but I liked 2.47 a lot better. Unfortunately 2.47 has problems with 2.47. I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
I'm not sure where the 2.69 rom is off hand and don't feel like searching for it at the moment so I'll just upload it for you. Try out 2.47 first though and see if it works well for you. The navigation problem problem through your inbox might not be a radio problem, there are a few roms that have problems with DTMS which sends the tones over an already connected call. Theres quite a few threads on here about that problem, just search DTMS and you should be able to find something on ways to solve that problem.

xeno1 said:
I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
Click to expand...
Click to collapse
I've had 2.47 radio on a G3 ever since i flashed molki's 2.26 OS and have successfully used along with WM6 (since day one). Signal has always been strong even inside my house that is covered by a hill.
The only issue i'm experiencing is with TheEquinoxe's reTouched ROM and BT that pairs devices but they can't 'see' the phone but can't say if the radio is to be blamed for this.

i've searched for DTMS but the search pulled up nothing under Wizard except for this thread. any ideas??
xeno1 said:
2.69 isn't bad, but I liked 2.47 a lot better. Unfortunately 2.47 has problems with 2.47. I know that there were people working on solving the problems with most of the radio versions not working with WM6 but I haven't checked those threads in a while to see if anyones has solved it or not. I know they were getting somewhere when it came to the cingular netwrok working with them but I have t-mobile so that won't help me much.
I'm not sure where the 2.69 rom is off hand and don't feel like searching for it at the moment so I'll just upload it for you. Try out 2.47 first though and see if it works well for you. The navigation problem problem through your inbox might not be a radio problem, there are a few roms that have problems with DTMS which sends the tones over an already connected call. Theres quite a few threads on here about that problem, just search DTMS and you should be able to find something on ways to solve that problem.
Click to expand...
Click to collapse

mestrini said:
I've had 2.47 radio on a G3 ever since i flashed molki's 2.26 OS and have successfully used along with WM6 (since day one). Signal has always been strong even inside my house that is covered by a hill.
The only issue i'm experiencing is with TheEquinoxe's reTouched ROM and BT that pairs devices but they can't 'see' the phone but can't say if the radio is to be blamed for this.
Click to expand...
Click to collapse
Maybe it's just the .318 WM6 versions that have been having that problem then. Using any other radio versions with it other than 2.19 or 2.69 causes you to have a lot of missed calls.
m3m3, I'll have to do a little searching and see if I can find those threads for you. It's been a while since I've seen them.

Well, I figured out part of your search problem, it's DTMF not DTMS. Sorry about that.

Looks like reinstalling your phone dialer pad should fix the problem. The only other solutions I came across all involved doing a hard reset.

lol...thats fine man. after i installed 2.69 radio rom, i missed a buttload of calls especially from my wife which wasn't too good. had to go back to 2.19 radio. hopefully, someone can program a good radio rom that doesn't miss calls and increases reception otherwise, I will have to migrate to the iphone and to cingular (att)....
xeno1 said:
Well, I figured out part of your search problem, it's DTMF not DTMS. Sorry about that.
Click to expand...
Click to collapse