To all
Somebody already installed Destinator version 2006 in a XDA II using WM 2005
The WM2005 is giving error type 2577 or OS(351)
thanks
Ummm...this is the Blue Angel forum, and I still have no idea what you are asking .
TheLastOne said:
Ummm...this is the Blue Angel forum, and I still have no idea what you are asking .
Click to expand...
Click to collapse
The Destinator is e navegation software
www.destinatoreurope.com
If you want help with with WM2005 on a Himalaya device, I would recommend asking at the Himalaya forums, not here, as the Blue Angel has no WM2005 yet.
TheLastOne said:
If you want help with with WM2005 on a Himalaya device, I would recommend asking at the Himalaya forums, not here, as the Blue Angel has no WM2005 yet.
Click to expand...
Click to collapse
thank you
Hello,
I have installed the last version of Destinator (5.1.65) on a Himalaya running Windows Mobile 5 and I didn't have any errors.
But I had a lot of trouble connecting the Bluetooth GPS and configuring the COM port. I recommend to read http://forum.xda-developers.com/vie...0&postorder=asc&highlight=destinator&start=25
As far as I know since 05/09/2005 and thanks to almighty buzz_lightyear you can upgrade Blue Angel to, see http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&task=listcat&catid=3
I have Destinator PN as well and have problems with it on WM5. The install fails running from Activesync or by manually copying the cab files to my SD card and running from there. I managed to get it to run by restoring files from a backup i had. But i cant connect to my bluetooth gps. Under WM2003SE i was connecting to com port 6. i tried what WC posted with the tomtom patch for com 6 but it still wont work. Anyone with any ideas? Thanks
OMG!! Where's the moderators? isnt that the moderators job is to moderate every single thread here..
Any live moderators here who can move this thread to its proper place..
Destinator PN running WM5
Hi Guys,
Just installed Destinator PN to my BA running WM5. Installed OK and running sweet.
Anyone having installation error - processor or OS type error. There is a solution. Locate the file default.ini in your DestinatorApps folder. Double click on it , it should open with Notepad. Scroll down to the Platform section and insert this line P2577v351=ARM save and close. Then try installing your software from the Destinator Console.
Have fun.
@tcmg1666, what WM5 rom version are you running? I have mamaich's 2nd patched rom and Destinator's install has always failed for me. I'm going to try what you suggested now and see if it works.
Edit: I have just hard reset and still cannot complete Destinator installation. The Destinator install program will install Destinator English but fails on the rest of the package. I am able to install the TextToSpeech part ok. tcmg1666, I would really appreciate if you could tell me what rom you are running and how your install went. Also what version of Activesync are you running? I am using 4.0 build 4343. Thanks
Destinator PN with WM5
Efjay, I am running with Maimaich BA_WM5_Patch2. My Rom version 5.03.02WWE, Radio 1.13.00. I am using Activesync 4 build 4343.
I am sorry to hear that you are having problem with your Destinator PN installation. My installation went smoothly from the Destinator Desktop Console. I did not have to hard reset after the installation. Just launched Destinator on the device and it executed straight away. Destinator found my wired GPS straight away. I have a Seido Car mount with wired GPS, it worked beautifully.
Can you tell me what sort of error on installation?? Glad to help if I can.
Did you get the 'Unknown Processor type or OS type??
@tcmg1666 thanks for replying. My problem is this: when I install from the console it will look like the install has finished. I get the prompt to check my device. On the phone I will get 2 prompts; the first to install Destinator English will succeed. the second prompt will be to install Destinator Apps; this will try to install then give me the message installation was unsuccessful. As I said I tried a hard reset and still get the same result. I don't get any other errors. I can install the TTS engine with no problems. I have also tried reinstalling the console. Nothing has worked so far . I did try what you suggested as well. Any ideas? what version of destinator do you have?
DEstinator PN with WM5
Efjay, sorry to hear of your installation problem.
I am stumped. I am running Destinator PN version 5.1.118 in my Blue Angel.
May I suggest you try and remove Destinator from your device and do a hard reset and then try to re-install Destinator afresh in Main Memory and if you are sucessful, the Maps can be installed in your storage card. Apart from that I have run out of idea. As I said I did not encounter any installation problems on my device.
tcmg1666, I am running (under 2K3SE) version 5.1.65. I bought it from Routeplanners.co.uk around July. Seems I have a later version than yours which you would think is more compatible. Is yours the European version? Maybe the version number is the clue as to why its not working and Destinator need to update the software. Thanks for all your help.
Edit: just to add i have also tried reinstalling the console on my pc, hard resetting the BA, deleting all folders and registry entries and install still fails.
Destinator PN
EfJay, I am running Destinator PN Australian version. I got it from www.pressdigital.com.au .
Related
Hey Guys i would need some help here i downloaded the Helmi upgrade rom but didnt seem to work. i get the device connection error before it even starts
i downloaded the official rom that i found on this forum on this link
ftp://ftp.clubimate.com/PDA2k_WWE_14000_176_11200.exe
as u can c this is the one from the Imate website when i attempted to install it. it actually didnt give me a connection error and started to install but when the PDA rebooted i got that connection error back and now i am stuck at the bootloader screen with SERIAL written at the top and V. 2.06 at the bottom tried to soft and hard reset but nothing seems to happen i even disconnected the battery for 30 minutes but couldnt get it to boot
Anybody pleeeeeease heeeeeeeeeeelp!!!!!!!!!!
Thanx
Please give us more information.
What windows are you running? XP or Vista?
Do you have an error number?
I run windows Vista and the error number i get is 101 Connection error when i attempt to run BaUpgradeUT
on the PDA the only screen i fet is the bootloader screen with SERIAL and V.2.06
Ok, the problem in flashing our precious BA under vista is that you need to replace the usb driver with an old version so the updater will work correctly.
Search the forums for vista update or vista flash and you will get the answer and the driver you need.
thanks a lot i ll try it right now been waiting for this
OK i just searched for vista flash and found this post
http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista+flash
tried it it worked done upgrading and now i have WM5 on my PDA2k
thanx alot u really saved my day
i am looking for imaginet arabizer for it now to fully enjoy the experience
And one more thing i have to thank Duanes who posted up the vista upgrading manual linked above Thank you
Hi all,
Finally WM6. Great!
But after installing the Tofclock ROM, my device became unstable like many others have reported. So when C_Shekar published his ROM, I installed it.
No problems on stability anymore, but after this upgrade I can no longer use my Bluetooth functions properly.
I can pair with my GPS, but as soon as I try running GPS software the device becomes slow and will reset after some time. After that, only turning bluetooth on will cause a reset, no matter if I'm paired or even using it at all.
So I re-installed the Tofclock ROM, because there I had at least GPS. But now it was no longer working there either.
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Can someone please help me on this one. I understood from other posts that I'm not the only one, so it's not just my Hima. But I really would like to have my GPS back.
rvdrijt said:
Today I even downgraded to AKU3.5 and even a 'pre-historic' version of 2003 (1.70) but it does not work anymore for any of the ROMs.
Click to expand...
Click to collapse
Which indicates that it is an hardware failure and not a software problem.
Flashing the device with another ROM version does not destroy any hardware at all.
Sascha
Thanks for your response.
But if it is just a hardware problem that can't be caused by an upgrade, how come I'm not the only person experiencing the same issue that started at the same time?
If it was just me it simply could have been bad luck.......
I'm just still not sure of my conclusions, but everything points at the upgrade to WM6. Let this be a warning!
I have not seen any similar reports in any threads before. Can you link us to specific messages?
It is very well possible that it's a software problem. After all you're probably using the same GPS/BT software in all these ROM up/downgrades you tried?
My GPS software is entirely on my SD card, after flashing a new ROM and formatting my RAMdisk it instantly knows my last position. Your software has IMHO probably messed up some file on your SD card that's related to your BT/GPS settings or so. I advice you to format your SD card, reinstall the clean GPS software on it, see if it still misbehaves.
http://forum.xda-developers.com/showthread.php?t=332945&page=17
You also entered a reply back then ;-)
I will re-install my GPS software. However, I've tried other programs as well with the same result (i.e. Speed Sentry). But that might be because I tried it after a first reset. And the reboot also appears when I have a different SD card in the slot.
Right now I'm waiting for my backup battery to be empty. Who knows, a 'real' hard reset might help.
@Maggy
Seems you were right! Removing the battery didn't work so I checked my GPS program's files. I found a recently changed file for the config and after I removed it it seems to work again!
Still a big puzzle why it started when I changed to WM6. But I'm updating my ROM at this moment so I hope to be able to answer the question if it is WM6 related soon.
Thanks for the help!
You're welcome.
And yes, you're right that I replied to that post but my memory is in my PC and XDA, not in my head
It's possible that there's a tiny difference between the way the config file is written in WM6 or WM2003, so switching from one OS to the other messes the file up.
I have the good habit of formatting the SD card when I flash a ROM.
Glad this item looks solved.
Even better: it doesn't look solved, but it is solved.
I went home using my GPS! YESSSS!
Knowing this it's time I start cooking my own ROM......... thanks to all the great people at this forum.
Hello All
After having read the message, I just try TOMTOM 6 with RBT2001 and have the same problem, tomtom is very slow, and after some time soft reset.
And I have this problem with the new ROM: 7.0c.40CS (WM6 AKU 7.0)
And I had no problems with the ROM: 7.0b.40CS (WM6 AKU 7.0)
If this can help you understand the problems ?
I guess you should delete \Storage Card\ttnavigator.bif, then reinstall Tomtom
It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.
rvdrijt said:
It's even much simpler: simply delete the \TomTom Navigator 6\navigator.cfg file. You'll have to redo some configuration, but it works great again.
Click to expand...
Click to collapse
Good.
Tomtom work again.
Thank you
Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!
please add which rom you currently use, do you have activesync installed
Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !
Sorry !
Yes I have Activesync installed (for another palmsize divice).
What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.
Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.
night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.
Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.
you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync
Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.
For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5
Error Message: "The program you have installed may not display properly because.."
Hello Guys,
Has anyone of you encountered this error message? "The program you have installed may not display properly because it was designed for a previous version of Windows mobile software".
I encountered this problem when i downgraded my rom from Master Efsane's WM6.5 to 2003se..Before that, the hima doc tool of Masther Ather doesn't work so i tried the other hima doc tools on this site..anyway, i tried flashing my himalaya with different roms but i keep on getting this error message. Right now i couldn't use some applications that are previously working with wm6.5. I already tried to flash different EXTroms but it didn't resolve the issue..this is very frustrating..please advise..
I'm using Sundream's 6.5 and I always get that message after installing programs but they still work just the same. it's just a warning. the only way to know is to try the program after installing.
Oh I see your problem. You said you downgraded from 6.5 to 2003se. Definitely not compatible. At least Use WM5 or greater for compatibility with 6.5 programs.
ferdiebaq said:
Oh I see your problem. You said you downgraded from 6.5 to 2003se. Definitely not compatible. At least Use WM5 or greater for compatibility with 6.5 programs.
Click to expand...
Click to collapse
Let me just clarify that the programs that are using are for WM2003se..when i upgraded to wm6.5, it's still working fine..but when i downgraded back to wm2003se, some of them are not working anymore..
I`ve installed WM 6.5 in my Qtek 9090, and when i put in dock to syncronize with my pc, said that the USB port is no longer availabile, chose another way to syncronize, or install a synchronazation software from the getting started disc... but i dont have this disk. what can i do to sync my phone with pc?
first of all, perform a hard reset by pressing power+reset+camera+record, in the menu that appears, set
Enable Kitl NO
Format Storage YES
Clear Registry Hive YES
using the camera and record buttons, confirm with the mail button.
make sure you delete older sync partnerships on your pc, you need to set up a new one.
if bot those actions did not work, try another usb port or finally flashing the rom again or maybe another rom, there are certain builds out there, that have sync issues, which one did you pick exactly?
Same problem
I have just updated a SPV M2000 to WM6.5 and cannot sync
I have tried a virgin PC running XP and this doesn't communicate. The USB connection is recognised by the PC but neither active sync works nor does the file manager recognise the PDA.
The PDA says that the USB port is a problem.
Can I still reupgrade? Maybe should I try an earlier version?
Is there a "known good" version of WM6.5 for SPV M2000?
Thanks for your help
hi and welcome to the forum.
what rom are you using (build number, chef)?
are you sure you followed the right upgrade procedure to the point? http://forum.xda-developers.com/showpost.php?p=4706441&postcount=2
especially the hard reset at the end is important and might help your case here.
yes, you will be able to upgrade/downgrade to change the rom, as long as activesync 4.5 is installed on a windows xp pc. that brings the needed driver for the device to connect, also if you can't sync.
there are many good wm6.5 roms here, just go to the blueangel rom development section and look at the different releases.
Same Problem sorted
Problem sorted.
Before you replied I tried one of the ROMs you recommended and Eureka.
This forum is really useful - thanks
I wonder if you can point me in the right direction. My real reason for upgrading the Blue Angel was to see if it would run Tom Tom Navigator 7 which needs WM6. It won't. I simply get the answer Program not for this device even though I am now running quite successfully WM6.5.