It is very strange...a week after every upgrade I have a touch screen
problem. At first the screen works perfectly then after a week or some days I
have to align my screen at least 5times a day.
I even tried it with a new protection film...but the problem still remains.
I hope someone can help or has some experience to share although this
doesn't seem to be an upgrade or common problem.
Related
i just recently bought my xda2s and it worked fine for a week though. now, from time to time my screen would be "untouchable". literally i cannot click anything or open anything even if i soft-reset it for 10x. buttons seem to work fine but the screen does not. it happened twice while my bluetooth was "on" and i thought maybe it was the bluetooth but recently the same thing happened with my bluetooth now turned "off". i have to wait for hours before it would return to normal again. Anybody help please? By the way, my bluetooth version is 1.0.0 build 3500.
I had a similar problem on my Samsung SPH-i700 PocketPC Phone through Verizon Wireless. Even after a hard reset, I couldn't get past the screen calibration, until I found out that a piece of hair and debris found on the outer edge of the screen right under the lip of the cover was interfering with the touch portion of the display. Apparently, the touch sensors extend past the visible area of the screen, so with both a little aircan and vacuum cleaning, the debris was picked up and the touch screen functioned normally again.
Is this a consistent and/or intermittent problem? Did a hard reset resolve anything?
look for the alignment
Do you have Calligragher 7.4 installed? I read about this in Tekguru website that if you re-install 7.3, the problem goes away. That is what I have done and it seems to be working for me so far (2 days test).
i've checked out my screen and i dont see any dirt or something... i even have a screen protector... dont know if that might cause the problem. Same thing happened last night but this time it was just for a short period of time then it went back to normal... I didn't try a hard reset cause i dont want to loose some of my files but if ever it happened again, i might try doing a hard reset and see what happens... right now, im having my xda2s checked if maybe it's a factory defect or something...
regarding the caligrapher program thing, i dont have that...
Hey, i have the exact same problem I bought mine here in Toronto, from an Asian dealer, its the O2 XDA IIs asia-pacific model.
Same problem, screen(touch screen) goes dead like no responses to any touches, for like half hour - 2hour once in a day or something and nothing cures it, hard soft rest nothing. just with time it suddenly starts working and the Handheld is useless until then...well i dont see any cure and this is the only place i have heard about someone else having this issue, i will take it back to the dealer, in hopes of exchanging.
any feedback will be will be appreciated
overclock it for a few days..that fixed mine..dont know how but it did.
There is a tread in blue angel about screen aliment that you might like to read. seems 4k of devices went out with screen problems.
What is overclock it. Fairly new to this. Mine just keeps trying to allign and thats all it does it doesnt go into boot mode just allign screen all the time
Hi,
I've had my Diamond for a bit more than 2 months now.
Recently I had an odd problem with it.
The touch screen seems to be busted.
The display works fine. However, it doesn't respond to any of my touch commands and it seems like someone is touching the screen randomly, as in, random clicks on the screen.
The hardware buttons work fine, it's just the touch interface of the screen.
First I assumed it was a ROM related problem, as this happened just after I installed Shine On. So I went back to the original ROM again, but the problem persisted. Then I tried another ROM, but same problem!
Therefore I suspect the hardware.
Am I right to assume that the screen is built up of several layers? Such as the TFT screen it self, the touch part, protective glass part, etc.?
This was a week ago and I've been using my old HTC since (waiting for a reply from HTC customer service which haven’t replied yet! ). However, three days ago I tried the Diamond again, and it seems to work flawless..!
So, I'm wondering if anyone else has seen this intermediate problem? Or if anyone has suggestions what could cause this problem?
Thanks for reading
Same s*it!
Hey mate.
I am experiencing the same problem as you do. The touchscreen does not respond or not accurate enough oder in a completelly different ponint than is poninted at. Readjusting screen helps for a while, soft-reset helps for a while. Sometimes it goes away without doing anything special. Did HTC finally answer your E-Mail?
I'd like to have this fixed as soon as possible.
Edit: I noticed that this problem disappears at once if TF3D is deactivated. Let'S see about that....
Hi,
even though there are probably several other threads concerning this issue, this seems to be the most recent one.
Do you use a (genuine?) screen protector?
I do.
I suppose this problem is caused by the tremendous heat* when the device is used and a screen protector that had been applied wrongly.
I might have applied the screen protector wrongly so there are a few very small (almost invisible?) bubbles (i.e. hot air expands(?) - I don't know the technical term),
since I had to remove the screen protector once because of dust..(does the glue lose its stickiness?)
I don't know if it's because of the bubbles, but I'm quite sure it's because of the screen protector.
Has anyone noticed this behavior without using a screen protector?
(I'm going to buy new screen protectors if neccessary, but I don't want to pay ~25€ if it's not)
*= I've adjusted my screen when my device was "cold".
Edit: I've probably found the reason for this issue: there's a deformation (caused by HTC) on the bottom of the screen(at the end of the screen protector) - there's a hole without glue (but air) - everything works fine while closing the hole by pressing the screen protector on the surface of the device.
I'm going to upload a picture later.
Edit2: The picture is now online. The fact that there's a hole isn't new of course, but no one seems to have linked these two issues so far.
(Correct me if I'm wrong)
The hole wasn't that big first but it grew because of all the testing
I've cut the lower part of the screen protector off now until I have a new one, although it doesn't look that great anymore..
Edit3: Ok, it's the hole and not the screen protector - I guess I have to get a new Diamond from my provider since it's a manufacturing defect..
The touch screen of my htc touch diamond is not working properly. It does not react to my touch. For me to get it to work I have to rub my fingers over it then it will be work again as normal. This only lasts for a few minutes after a while it becomes non responsive again. It is like it has to be warmed up to get it to work. This a problem when it comes to sending text messages. (the problem remains when I remove the protective screen).
Anyone has a answer to this?
remember the last program you installed and remove it , maybe it cause this problem
or try hardreset
Tried both methods still not working. I have ran out of ideas. Anyone else expierenced this problem?
Im having the same problem with my Raphael
To really know whether it is a hardware problem or software based problem, I recommend a hard reset and see whether the problem persists...
this is likely to be water damage on the screen. send it off for warranty see if they fix it. they fixed it for mine.
The thing is iv noticed the touch screen isn't thermal reactive like most touch screens. In other words the temprature of your finger is sensed on thermal screens, the HTC you can use anything solid that makes contact. Usefull if you have long nails.
So I'm guessing its probably hardware if it works after a while of 'rubbing' it, But like otacon said I would do a hard reset before jumping to that conclusion.
Same problem
Hi there....i saw that this is an old thread but did you manage to get it to work?
Cause i have a HTC Diamond that i changed both the displays on(LCD and the "point screen") and everything works fine on mine now,even tried to recieve phonecalls and it works excellent so as i said EVERYTHING works like a charm but the touch function.....it doesn´t react in any way while trying to use the touch function and i have tried soft reset,hard reset,new rom,checked all the internal connections around 4-5times and everything is ok but the damn touch function won´t work whatever i do with it.
I haven´t "glued" the 2 screens together,but they are sitting close to eachother so it should work anyways right?
Now from what i have seen on internet is that there are different versions of touch screens available on the market and i ordered the LCD from one company and the touch screen from another.
Could it be so that they aren´t compatible together or am i doing something wrong?
I´m still stuck at "Tap the screen to set up your Windows Mobile-based device" and can´t get any further after trying another rom.
Please help me out if it´s possible.
I have exactly the same issue you're experiencing, I've actual flashed the original rom, thinking that might put every settings in place to make it work, but no joy.
I don't be leave the concept of the weather condition equate to the performance of the device, as read in some of the forums. reason being I've had mine in very hot climate Country for over year whiles working on a project in Africa. In fact that was when I realised the the screen has become unresponsive.
I think this is a hardware issue.
It´s working perfect again
So since my last reply i ordered a new touch digitizer and lcd display and soldered them together carefully(first time i bought a lcd and digitizer from two different companies so they weren´t compatible with eachother and made the touch defective and second time i bought both digitizer and LCD screen from the same company and then it worked) and it has been working perfect since i last wrote my comment so i recomend you check the contacts/connections first on the phone because i had some minor issues with them when i assambled the phone again so i had to #wiggle# the contacts so i made sure they were connected.
We had a company here that sold lcd displays and digitizers out for a total of 30dollars with shipping so i had nothing to loose on it so that´s why i ordered a new set again and that made everything work as a charm since i replaced it.
Now i have searched online about the displays and the digitizers and i have found out that there are atlast three different versions of them so if you order a digitizer and a LCD make sure you atleast order both from the same company so it doesn´t happen the same to you what happened to me the first time.
Cheers and hope i helped you somewhat or else just ask on and i should try to answer.
Hi guys I've got a HTC Ignito and Id like abit of advice the touch screen on my phone seems to be acting up as u can press on the left hand side and it will detect pressure but only the top and bottom 5mm will work properly the rest it will activate what is on the opposite side or will do nothing.
when Ive tried to calibrate the screen it just constantly repeats the calibration process non stop but if you do a hard reset it will start working properly but as soon as you reset phone it messes up again.
Any one any ideas is the touch screen broken or is it another problem its got the stock rom on it
Sorry for the bad structore of post feeling abit tired as been up for hours annoyed at my phone.
I noticed a simmilliar issue starting a couple of weeks ago. Looks like the X-axis of the digitizer starts to die. In my case it only detects touches in Y direction, but not in X.
So far it only appeared under hot condition like sunlight or constantly running device in craddle. After cooling down it always came back to normal behaviour (so far)
Cheers bud for the reply. Its weird tho as its same as yours as it will detect the Y axis movemnt as when i hadnt hardrest it you could minamise the clock but that was it. Simalar problem happened to my grandads orbit and acted like urs then got progressivly worse over a few months.
I wonder if anybody knows if it would be sortedby getting a new touch screen.
HI...
Hopefully we are not the only ones... But yeah my MDA Compact (Diamond on T-Mobile UK) is doin the same thing. Like you guys, mine has staterd to get worse, before it was just a few edge icons that i could'nt press..but now sometimes pressing the screen anywhere does nothing, all i can do is scroll up or down.
Axelpix... you make a good point about temp...mine gets quite warm when charging on the USB. I will try to see if this is causing the problem.
Any info on fix would be greatly welcomed.
PS i'm running the Windows 6.5 Energy ROM. 14/07/2009
Hi guys least im not alone I think the only way to fix this problem might be to replace the touchscreen im just looking to see how much it would cost to buy a new one and if its easy to just replace the screen or if it comes attached to the lcd screen like on the orbit
continuous request to calibrate the screen
Yes, I have experienced this when i switched the handset on for the first time after purchase but it went off when I forced a restart to the handset.
Hi friends,
A week ago I decided to finally replace the cracked screen of my phone. The phone was perfectly working, with the exception of the annoying lines everywhere around the broken glass.
I went to a repair service (not official) to have it changed for a new one (glass+lcd) and got it back repaired after few days.
During the first hours the phone was working just fine, but I noticed that the touch screen was slowly getting erratic. After few hours it was just a bit erratic but ok. 10 hours later it was almost impossible to use already. 24 later it didn't respond anymore to the touch.
I went back to the repair service and asked for a new screen that I got for free because we assumed it was a problem of the new screen. Problem is, it happened exactly the same with the second one!! And now, 24 hours later, it doesn't work anymore.
I have done a factory reset. I have flashed new ROMs, I have flashed back to the stock ROM, updated it, nothing has changed so it totally looks like a hardware issue.
My question is:
What may be causing my new screens to go mad after working perfectly fine during the first hours?
Summary:
My Moto G 2014 works perfectly, but it has a crack in the screen
Decide to go to a non official repair service to have it changed for a new one (LCD + Glass)
First hours with the new screen: All works fine
Slowly, the touch screen becomes more and more erratic
24 hours later the touch screen is useless (it still reacts to touch but totally mad and weak)
Decide to have it replaced again (this time for free)
With the second new screen, we test that works fine, and to confirm that is not the phone, we install back again the first new screen, verifying that it doesn't work.
Finally install the second new screen. All seems to be perfect!
Experience again all the previous points
What should I do lads? Did the repair service **** my phone? ;^(
It could be that water somehow got in (speaking from experience).
xRandomLurker said:
It could be that water somehow got in (speaking from experience).
Click to expand...
Click to collapse
How would that explain that the newly replaced screens work fine for the first hours and then gradually stop working?. Also , I can't imagine how water got in the phone for the last weeks, besides, it works perfectly, is just the touch screen.Water would most likely **** more things. no?
Has anyone experienced the same problem as me?
thanks!
Is it genuine?
sky0165 said:
Is it genuine?
Click to expand...
Click to collapse
The screen? I don't actually know. But after changing twice the LCD seems unlikely that the LCD was defective. It may be more related to my phone (although I can't understand what) and something the guy of the repair service ****ed.
Any thoughts?
thanks for the help