Database Develop

Bootloader Screen

Hello,
I need some expert help to get my XDA IIs out of bootloader.
I attempted to update ROM and got stuck in Bootloader.
I followed directions posted on this forum to the letter:
Make sure your device or cradle is connected directly to your computer (so no hubs!)
Disconnect the device from the PC, or remove from cradle
Perform a "hard reset" on the device (screen will flicker but nothing will change)
Kill the BaUpgradeUt.exe program on your PC by using Window's Task Manager (CRTL+ALT+DEL)
Kill the wcesscom.exe program on your PC by using Window's Task Manager (this is the ActiveSync application)
Place the device back in it's cradle
Restart the upgrade program from your PC (double-click BaUpgradeUt.exe)
Still No JOY !!! Any suggestions ?

Solution to Upgrade..?
Hi, have you looked at this properly..?
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Or - If you're trying to update to WM5..
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
Then you should be ok.. Take a breather, start again..
Let me know how you get on..?
Cheers,

Stuck in Bootloader Screen
Mr Philly,
Thank you very much for your help, however I followed the links you gave me, and still have no joy.
When I run the BaUpgradeUt.exe I get a "connection error" saying check the physical connection between the phone and the computer. Also, BaUpgradeUt seems to close active sync once launched. The program then freezes unless I reopen active sync. I then get the connection error.
When I run the MaUpgradeUt.exe I get to the upgrade screen telling you that you are upgrading from ... to ... however the fields listing the various ROM versions etc.. are blank. If I click on upgrade, I get an error 150 saying "not designed for your device, please get proper ROM upgrade utility."
Any new suggestions for me ?
Missing my XDA very much as I use it a lot.
Thanks

I figured out the problem. It seems that the PDA was not responding to the ROM upgrade because the SD Card was in place. Origionally I thought this to be of no consequence as I only have a "dummy" card in the slot. I was wrong. Once I removed the Card everything went as it was supposed to.
:wink:

Stuck on bootloader
Hi all,
I copyed in fakt i did cut some files from my BA and moved to Storage Card (1Gb), and it restart byhimself and i am stuck on the bootloader. ??? Shall i rom Upgrad it ?
Howlingwolf

PDA2K stuck on boot screen

i have downloaded update rom v 1.40 form the imate site. and connected my device to my PC via bluetooth link and sync through active sync4.5 and then run the update setup setup found the device v 1.22 and ready to update it to v1.4. and then after the restart (which the setup automaticlly does) a display with out back light appers which says (Serial v2.07). i tried to soft reset and hard reset but nothing happens, on the short i am unable to load os on my device and stucked to this display (Serial v2.07). i do not have data cable or cradel. any solution Please.
****
Moderator edit
Thread moved from news section to Blue Angel Upgrading
****

did you find a solution
because i have the same problem with mine

soegaard71 said:
because i have the same problem with mine
Click to expand...
Click to collapse
I have the same problem but i'am with mda III T-mobile can Any one help me ??????

well i do not want to offend you but you are too stupid to even try the upgrade over bluetooth, the upgrade only can be performed over cable

Get a cradle or a data cable and update according to descriptions in the Wiki. You're in bootloader mode, you should be able to resume the update from here, but ofcourse only by cable.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home

worst case scenario is to recover your device using mtty, search the forums for the method

Or you can find it in "the guide" which can be found within the wiki (near xplode ROM)
I really want to improve the wiki - but the ****ing time

is there a way of flashing a rom from sd?

Completely bricked my phone, does not connect to pc even from bootloader, bootloader says "usb" pc says something about a usb device malfunctioning. So I cannot loadwizard love my only input seems to be via sd slot. Can it be saved? please help!!

You should start by listing your phone model, what you were doing when your phone stopped functioning, the ROM you tried to use, whether you followed any flashing or unlocking guides, etc.

sorry all, I spent all night trying to sort this . Post a thread asking for help (always a last resort!) and sorted the problem about 20 later.

benoz said:
sorry all, I spent all night trying to sort this . Post a thread asking for help (always a last resort!) and sorted the problem about 20 later.
Click to expand...
Click to collapse
Still, it would be good to post your information and what you did to fix it. It may help a newbie in the future.

fair enough, g3 wizard running 2.8.7, went to update radio and killed it, would restart and run very slow, no usb connection etc. was running a ipl/spl 2.6.2 or similar. tried to install wizard love but got an error message about a malfunctioning usb device (something like that). Deleted activesync 4.2 and tried again, no goos but when I installed activesync 4.5 I managed to install button rom

xda IIi problem

Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Thanks

you go to bootloadder and uprom again
goog luck

It doesn't sync with the pc anymore though.

Won't sync, but if you plug it in, and see the screen on the pda change to something like USB, it's connected.

It's connected, but when i go to update, it says country id error.

find this file at the ftp "MaUpgradeUt_noID.exe" and use it to upgrade

I fixed the problem by reflashing the rom using the ma_upgradeUt.
Thanks to everyone that helped

xda2i dead
hello
the solution seems very good to resolve the problem i have , but i cannot see any link to domnload the fix....
after aplying update ROM on my XDA2i (Qtek 2020i) i had a black screen with serial and V 1.01..
please advice
thanks

My XDA Dead
my O2 XDA IIi do not boot and it displays is "Serial V.1.01"
Please Help Me ?

fishbulb said:
Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Thanks
Click to expand...
Click to collapse
I'm in the same boat...
I think I'm in the process of reflashing the ROM.
I have a message, " Checking the information on your device, Please Wait"
how long should this whole process take?
Thanks

Time for an update
I waited 45 minutes for the ROM to update. It never got out of the "Checking the information on your device, Please Wait" mode. I have a bad feeling...
Its my guess that when its in the SERIAL screen and USB screen when plugged in to the Computer that its in Bootloader Mode. Is there a way to get it to load a new ROM? Or, am I trying to revive a "brick."
Thanks to all that help or explain my situation to me.

captirwin said:
I waited 45 minutes for the ROM to update. It never got out of the "Checking the information on your device, Please Wait" mode. I have a bad feeling...
Its my guess that when its in the SERIAL screen and USB screen when plugged in to the Computer that its in Bootloader Mode. Is there a way to get it to load a new ROM? Or, am I trying to revive a "brick."
Thanks to all that help or explain my situation to me.
Click to expand...
Click to collapse
you have to quit the installer program from task manager, then rerun it, i had to do this with both my xda2 and xda2i it hangs, make sure you dont remove your phone from the cradle or out of boot loader mode.
the second time the program runs it will not find any existing info and just install the OS, it takes about 30 mins

A Little More Info, Please
skeeve666 said:
you have to quit the installer program from task manager, then rerun it, i had to do this with both my xda2 and xda2i it hangs, make sure you dont remove your phone from the cradle or out of boot loader mode.
the second time the program runs it will not find any existing info and just install the OS, it takes about 30 mins
Click to expand...
Click to collapse
Please go into a little more detail. I go to Windows Task Manager, click on the "Processes" tab but unable to find the "installer program." Thanks...

I tried with my o2 2i XDA but it gets up to 2% then says there is a radio update error. HELP And does anyone have the 1.10 radio update?

well wn i faced this problem in my i-mate pda2,i asked the i-mate support ppl n they sed there wz no way other than dwnloading the original rom n re-installing it,so i guess u guyz hv 2 do da same in ur O2z.this problem happens becoz a simpl 'stik at bootloader' program is loaded in ur extended roms,n remember that extended roms are LOCKED.

fishbulb said:
Hi
I attempted to download the XDA IIi (v1.11.171) software update and during installation the software update was interrupted by my computer rebooting. Now my XDA does not boot and all it displays is "Serial V.1.01". I have tried a hard reset but it still does not boot.
I would appreciate any suggestions you could advise on how I can recover from this situation.
Tried the same but dropped during update & now xdalli is completely dead. Read light comes on if in cradle with no battery.
Knowledge is very basic. Any suggestions apreciated.
Rgds
Click to expand...
Click to collapse

[Q] unlock rom image for hp 6515

Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.

Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone

SKU error,, did not work

Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.

My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.

Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?

ROM Update 6515
SKU-error means wrong language.....

deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20

I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............

Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.

SKU ERROR help pls

cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?

Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!

Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%