My system locked whilst flashing the CE rom.....
now i have a completely dead pda.. how do i recover from this?
:shock:
nobody ? any ideas at all? or is my xda going back under warranty?
help!!
reboot
If you reboot your pc, and leave the BA in the cradle, and then just execute the updater (romflasher) again, it works fine!
the BA just sits there.. no lights.. no nothing.
if you remove and reseat in the cradel you get the briefest flash of red on the right hand light. then nothing. screen is blank. hard or soft reset do nothing?
pc just says it cannot find pda when you try to update?
i assume its screwed then.
not nessaserily, try to get into bootloader mode....... i think its power button, camera button and soft reset button, tho someone please correct me if im wrong, if you can get into bootloader, then your device is ok, i aint sure how to get out of bootloader after this, but this happened to me when i tried to install windows mobile 2005 on my BA, lol, before i knew it didnt work, obviously, lol, if you open up active sync, click on file and connection settings, untick, allow usb connection, and try to do the upgrade again, but first after you untick that box, and clicked ok, you need to do a hard reset then put it in the cradle. then after you try and upgrade again, this worked for me, try this and let us know if you still cannot do it.... 8)
I've flashed my XDA, XDAII and MDAIII many times. Ocassionally, something has gone wrong, but I've always been able to recover the situation. But I've just tried to reflashed 1.40 and the PC crashed at 55% and now I'm in the same boat as you. I've tried all the tricks and it is completely dead. Fortunately a new one arrives in the morning.
I think you'll also have to swap your phone. If it won't go into bootloader, it's dead.
thing is, i think the warranty is void if you play around with upgrading and screw up,
im always happy to help someone fix it, as i done it many times with my own, and fixed other pda's too...... 8)
wont go into bootloader mode..
8-(
U shdn't have removed it from cradle.....See if u get a sound in yr PC when u place your device in the cradle.If yes rthen it is detected...
ffelan said:
wont go into bootloader mode..
8-(
Click to expand...
Click to collapse
FFelan,
Last ditch, pull the battery off, and allow the backup battery to fully drain. (60+ minutes). Then put the battery back in, and see if you can get it into boot loader mode using the manual method discribed above.
-Chris
thank to Joey!!!!
we have life.. neither of us is exactly sure why but eventually it decided to talk so was reflashed and all ok!
ffelan said:
thank to Joey!!!!
we have life.. neither of us is exactly sure why but eventually it decided to talk so was reflashed and all ok!
Click to expand...
Click to collapse
no probs mate, hope all is ok, and hope u dont mess it again, lol...
Related
Hey guys,
I've got a realy big problem with my galaxy. It's not possible to start it anymore. Nothing happens when I try to turn it on, I don't even get the first boot screen.
My phone is t-mobile branded and I tried to do this, to get the download mode working (sry, i can't post the link cos i have no permission):
[FIX][110% SAFE][UPDATE: 15.Nov.2010] 3-button combo FiX for Selected Firmwares
forum.xda-developers.com/showthread.php?t=821698
After applying the update.zip the flash starts but the phone did't restart after a few seconds like posted.
I already removed everything (battery, sim card, sd card) but nothing happens.
Please help!
Brgds
can u get into download mode? if yes thn flash a firmware thru odin...
nope, no chance. it's totaly dead, no reaction by pressing any buttons.
seems so i have no other chance then giving it to t-mobile/samsung
is ur phone charged? may be the phone doesnt react cause of no battery...??? try to chrge for some time....
tried already.... seems hope less.
I gave it to t-mobile and will get a new one in 2 weeks
thanks for your help!
same here the same problem is there any thing that I can do to fix this problem please help
x0Nemesis0x said:
same here the same problem is there any thing that I can do to fix this problem please help
Click to expand...
Click to collapse
Can you go to download mode? If yes, then flash a firmware from odin as mentioned above. Else return is the only option provided you haven't left any trace of manipulation on your phone...
Had the same thing. The phone didn't even react after connecting to the charger.
I had to give it to Samsung, got it back after almost two weeks. But it came back unbranded
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
I have the same issue. I was tryint to load Cognition and it just gets stuck on the ATT screen but I haven't tried a jig yet. I was wondering if I can replace the files on the phone with good files that aren't corrupted and see if it boots up because droid explorere can still pick up the phone and so does Odin but when I do a master reset nothing happens.
@rajasekhar - Have you tried: Removing all parts (battery, sim, sd) let it sit for a few min (my preference is around 10 min to insure no residual power is left in the system) then hold the jig in place and putting the battery back in? Keeping the jig in place, so that as soon as the device gets power it is immediately seeing the jig, before it can try any other processes.
A bit difficult to do with hand made jigs I know. If you still getting nothing then your in for the worst and the phone need a JTAG or service center visit.
Tho it sounds a little odd that it could boot up to seeing the AT&T logo, but does not respond to the jig. Might even be a hardware problem.
@i3oots - Since you say your still getting PC response your safe to try and reflash it or just pick something different altogether. Tho you might wanna let ODIN settle and just sit there doing nothing for a few min, w/o then w/ the phone plugged in. Or learn about Heimdall and go that route.
Would I be able to flash it even though it get's stuck on the ATT screen? It won't go into download mode. I'll look on the forums how to flash it too. I'm a newb at this which is why I bricked it but everyone has to start somewhere lol.
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
You have probably Hard Bricked your phone. A JIG will not work to recover the phone. If the phone has any life at all, then the JIG will work. Else, u hard bricked it...you should never remove the usb cable when flashing bootloaders or odin or anything!
the only solution is to get a JTAG which can recover hard bricks OR you can go to a warranty store (don't know about india) and make up a sob story and have them replace it..
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
Does your computer recognize the phone? If odin is open, does the box turn yellow when you connect your phone? Make sure you have the right drivers. I think cm7 and captivate drivers are different. Keep trying with the jig. Just because you can't see anything on the screen doesn't mean the phone is dead.
i3oots said:
Would I be able to flash it even though it get's stuck on the ATT screen? It won't go into download mode. I'll look on the forums how to flash it too. I'm a newb at this which is why I bricked it but everyone has to start somewhere lol.
Click to expand...
Click to collapse
If your phone is booting up far enough to send out USB info for ODIN and other PC programs to see it, then your still in a workable condition. This also means you can still get into download mode, but since things arn't working properly it will be harder. Depending on which bootloaders your phone has will direct which methods you'll have to try out to get into download mode.
AFTER you've had a chance to look around the forum and self-educate on the different ways of getting into download mode. If your still having problems give us a lil more info of what you were running before the flash and to which version of Cog you were trying to flash.
Did anything worked for you, if not only a jtag can help you looks like u hard bricked the phone.
Hi guys
@DaNarki : Yea i tried that method to .
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Went for a samsung service centre they said they wont handle other country products of samsung. Just yesterday went to the local Cell phone Repair store , He said like he would try using a Ctool box they have for installin onto the rom directly. So i thought why not Give a shot to it ...
That store guy raised another question in me . Yesterday after giving it in the morning he said to call in the evening . I did so and he said the Phone is booting on the Ctool but it is sometimes throwing error . I dint get his intention in saying so . have to go to him today
bricked maybe not
I thought I was bricked also ...HARD BRICKED......no buttons no nothing ...tried odin on, phone plugged in, and hold down volume up and down and reinstall batt......nothing worked.......but this... it worked for me........ok first of all remember this will be a bit tricky because you will have to keep the volume keys pressed the whole time till you have download mode......should also have full batt......take out the sim and any flash cards you may have in the phone and the batt.....set the phone down and watch a couple hours of tv or try to brick your buddies phone so he can feel your pain...lol something.....ok now after your tv show has gone off turn on your computer and start up odin one click to stock.... put just the batt in the phone.....if your friend is still there you should try this with 100% batt.... use his phone to charge your batt.....any way put the batt in the phone....plug the usb cable into your computer......now for the tricky part .......press down the volume up and down now and do not let them go till the end of this and you should have download mode.......now plug in the usb to your phone IF YOU HAPPEN TO GET DL MODE HERE THEN GO AHEAD AND LET GO OF THE VOLUME BUTTONS AND FLASH YOUR PHONE ....if not... KEEP THE BUTTONS PRESSED.......now take the batt out of the phone.....keep them pressed......unplug your usb cable......keep them pressed.... restart odin...... keep them pressed....plug your usb cable back in.......keep them pressed... re-install the batt.....you should get download mode.......remember you have to keep them pressed... JUST... the volume up and down pressed through the whole process nothing else....This worked for me and I was dead bricked no nothing from any of the keys no nothing..... I DIDNT INVENT THIS METHOD I READ IT ON HERE SOMEWHERE AND CANT FIND IT AGAIN......It did work for me when nothing else did.....so if the person that posted it reads this THANK YOU...... ................................................. I hate to say this but I may have got the last two instructions backward you may have to put the batt in before plugging in the usb cable.......Like I said I cant find the original post
rajasekhar19489 said:
Hi guys
@DaNarki : Yea i tried that method to .
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Went for a samsung service centre they said they wont handle other country products of samsung. Just yesterday went to the local Cell phone Repair store , He said like he would try using a Ctool box they have for installin onto the rom directly. So i thought why not Give a shot to it ...
That store guy raised another question in me . Yesterday after giving it in the morning he said to call in the evening . I did so and he said the Phone is booting on the Ctool but it is sometimes throwing error . I dint get his intention in saying so . have to go to him today
Click to expand...
Click to collapse
rajasekhar19489 said:
Thanx for ur suggestions guys .I really squeezed through xda for all possible ways of unbricking but no use. SO thought JTAG was the only option.But wanna know more about JTAG???????
Click to expand...
Click to collapse
If you just wanna know a bit about the process ask this guy. He is pretty much the only person in the US (I know not all to useful to a person in India) that does JTAG for the cappy.
I can tell you this much, it requires a special device called a Riff box and it sends boot info directly to the chip on the main/mother board that is used for the booting process.
Somewhere I've seen a site that listed info of ppl around the world that will JTAG, but I can't seem to find it right now.
malebornin69 said:
I thought I was bricked also ...HARD BRICKED......no buttons no nothing ...tried odin on, phone plugged in, and hold down volume up and down and reinstall batt......nothing worked.......but this... it worked for me........ok first of all remember this will be a bit tricky because you will have to keep the volume keys pressed the whole time till you have download mode......should also have full batt......take out the sim and any flash cards you may have in the phone and the batt.....set the phone down and watch a couple hours of tv or try to brick your buddies phone so he can feel your pain...lol something.....ok now after your tv show has gone off turn on your computer and start up odin one click to stock.... put just the batt in the phone.....if your friend is still there you should try this with 100% batt.... use his phone to charge your batt.....any way put the batt in the phone....plug the usb cable into your computer......now for the tricky part .......press down the volume up and down now and do not let them go till the end of this and you should have download mode.......now plug in the usb to your phone IF YOU HAPPEN TO GET DL MODE HERE THEN GO AHEAD AND LET GO OF THE VOLUME BUTTONS AND FLASH YOUR PHONE ....if not... KEEP THE BUTTONS PRESSED.......now take the batt out of the phone.....keep them pressed......unplug your usb cable......keep them pressed.... restart odin...... keep them pressed....plug your usb cable back in.......keep them pressed... re-install the batt.....you should get download mode.......remember you have to keep them pressed... JUST... the volume up and down pressed through the whole process nothing else....This worked for me and I was dead bricked no nothing from any of the keys no nothing..... I DIDNT INVENT THIS METHOD I READ IT ON HERE SOMEWHERE AND CANT FIND IT AGAIN......It did work for me when nothing else did.....so if the person that posted it reads this THANK YOU......
Click to expand...
Click to collapse
Thanx MAN!!!!!! . it seems interesting method to try .. but i have to wait 12 hrs to get my phone back from the guy i gave to repair that. he said his chances of getting it fixed are 50-50 so i might as well prepare for your method to ..
DaNaRkI said:
Somewhere I've seen a site that listed info of ppl around the world that will JTAG, but I can't seem to find it right now.
Click to expand...
Click to collapse
Thanx DaNaRkI .. hmm well i would now again start digging the threads for seeing wat u have suggested ..
rajasekhar19489 said:
HI,
I am from INDIA, few months back I got a Samsung Captivate , Till now i tried FIREFLY and CM7 ROMs . The first time flash i did it with ODIN i guess i did it with a wrong firmware ,So was stuck with AT&T screen boot loop issue. Searching the forums and found JIG may help and so made a JIG (as i can't get one here) . and recovered my phone and flashed stock and then FIREFLY and 2 weeks back i flashed CM7 for getting Gingerbread and not likeing the UI of the ROM tried to switch back to stock and then customize on my own.
So When i tried flashing Stock the installation was success the screen stuck few moments on AT&T logo and i thought it would go off, But as i was very eager to get my phone online again i pulled of the battery to restart manually (Which i dont think was nice idea ) Now the screen remains black even i use the JIG to get into download mode. But the phone heats UP when i plug it for charging on computer or directly to switch
HELP NEEDED as i am very addicted to this PHONE
Click to expand...
Click to collapse
hello brother,,
u can find the Jig here in india... i also purchased... and it worked for me..
Download-Mode-USB-Jig
press thanx if it helps..
rajasekhar19489 said:
Thanx MAN!!!!!! . it seems interesting method to try .. but i have to wait 12 hrs to get my phone back from the guy i gave to repair that. he said his chances of getting it fixed are 50-50 so i might as well prepare for your method to ..
Click to expand...
Click to collapse
Hope it helps I wish I could find the original post again to thank the guy that told me how to do it. I had sent that phone back to att and the promptly sent it back and told me the water dammage sticker in the bat compartment was missing and they wanted to charge me 409 bucks for the phone ....long story short it was there when I sent it and I told them to go pound sand up their ass because I wasnt paying them that much and ended up paying 125 bucks for a paper weight.So that is when I decided to have it jtaged but figured I would give it one more shot before mailing it off. That was when I found the post from that person and low and behold it worked........................... I hate to say this but I may have got the last two instructions backward you may have to put the batt in before plugging in the usb cable.......Like I said I cat find the original post
malebornin69 said:
Hope it helps
Click to expand...
Click to collapse
Buddy tried it ... Thanx for that..But dint help . Now going for another options i mean in search for other options
But ppl help me with JTAG thing and its users(or developers) availability in india
Forgot to mention
I Missed to explain my flashing procedure i have done this time . Like I never tried flash a boot file along and so was reading some threads about boot loader variations between FROYO and GINGERBREAD so i tried flashing ablong with boot loader and then I got the stock gingerbread file i put the boot loader SBL in heimdall Firstboot loader path .And Boom the first reboot got stuck and i removed the battery and then again when i tried to restart the phone is dead
Thinking this might have where the whole thing went wrong and made the cell dead .
hi guys im wondering if any of yous can give me some idea as to what happened to my galaxy note.first of all i will start by saying i am a noob at this?ok so i tried to update my note to ics using odin v1.83.i put in download mode and the box came up yellow and i clicked on pda and then i hit start.now i didnt do a backup because 1 im stupid and too i didnt think i needed to as there wasnt really anything on the fone that i needed or so i tought.anyways everything went fine until it didnt reboot.so i unpluged it and took out the battery and reinserted it.to find that that fone was starting up but with no visual on sccreen or nothing.please tell me im not screwed.iv left it back with vodafone as this is my network.just want to know whats gonna happen really.cheers guys any advice would be great?
fonepimp said:
hi guys im wondering if any of yous can give me some idea as to what happened to my galaxy note.first of all i will start by saying i am a noob at this?ok so i tried to update my note to ics using odin v1.83.i put in download mode and the box came up yellow and i clicked on pda and then i hit start.now i didnt do a backup because 1 im stupid and too i didnt think i needed to as there wasnt really anything on the fone that i needed or so i tought.anyways everything went fine until it didnt reboot.so i unpluged it and took out the battery and reinserted it.to find that that fone was starting up but with no visual on sccreen or nothing.please tell me im not screwed.iv left it back with vodafone as this is my network.just want to know whats gonna happen really.cheers guys any advice would be great?
Click to expand...
Click to collapse
Lets hope you haven't hard bricked it like I did. Are you not able to get anything on the screen at all? Does PC Odin show a cable connection when you connect your phone to your PC via data cable?
Not sure what exactly do you mean by phone starting with no visuals. How do you know it's starting up if you can't see anything ?
Anyway, check if you can enter download mode again - power+home+vol.down. Even without screen, after that press volume up to continue - if it works, Odin should detect your phone. If it does, just flash it again. Probably just a bad/unfinished flash.
Akiainavas said:
Check if you can enter download mode again - power+home+vol.down. If yes, just flash it again. Probably just a bad/unfinished flash.
Click to expand...
Click to collapse
Or you could try a USB JIG if that doesn't work.
Moved To Q&A
Please post questions in the Q&A section
Ahem. Read guys. He said he gave it to vodafone for service.
OP just wants a hint at what might be wrong with it.
screen gone black
cheers guys.to answer some of the questions.first it still detects in odin and i have tried or roms or updates.still not working.2.you can hear the start music when i power on.then the screen is just black.
I'm a complete noob in dire need of help. I wanted to root my phone, and read the 3 procedures mentioned in the sticky thread. The 2nd one (nvflash) seemed very well explained and was sure to work with 2.3.4 so I decided to use that. As I was in my friend's house I used his pc and installed the drivers while my phone was connected in apx mode. Then I double clicked the "install internal xp" batch file which resulted in a black window with some texts, but seeing this my friend freaked out and closed the window before the process was finished. I told him he shouldn't have done that. I then disconnected the phone and switched it on. It seemed to switch on properly. So I then switched it off again and pressed and held the power and vol down switches to see if I got cwm. This showed LG screen for a few seconds and then the screen went off.
Now whatever I try to do I can only see the LG screen for a few seconds and then the screens goes off. No power on, no recovery, no nothing. And I can only attempt to even power on once, after the screen goes off I must remove the battery before the power button does anything again.
I tried to freshly nvflashing the recovery many times, but it made no difference. Does this mean my phone is bricked? Please tell me how I can solve this as I'm really worried.
NVFlashing the recovery again *should* have worked. So we first need to make sure you're trying to start CWM the correct way.
1) Unplug phone
2) Remove battery for 10 seconds.
3) Insert battery
4) Hold volume-down, do not let go, keep pressing it.
5) Press power button, keep it pressed.
If/when you get the second LG-logo, bluish halo, you can release both buttons, not before.
Nope, that was exactly what I was doing to access the recovery. I tried it again just now and it didn't work.
It just displayed the regular LG logo and then the screen went off. I'm not sure the phone completely shuts down 'cause if I keep it like that it gets quite hot and I can't use the power button again to try to power up. Only removing and re-inserting the battery gives me another attempt.
Is there any chance this is a hardware issue?
Hardly any chance this is hardware related if it was working before the first NVFlash.
Good, next step will be to NVFlash a complete stock ROM. You will unfortunately lose any data you might have on it, but that's the price to pay.
Go here, follow the instructions precisely, skip installation of apx-driver. Report back.
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
sean8000 said:
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
Click to expand...
Click to collapse
It works, yes, but is the original Froyo. This is just a way to get the phone up and running again.
Later you have a few choices. Either install CWM, then install you ROM of choice, or upgrade it to the latest for your region by using the LG Update tool.
EDIT. Oh, and btw, it is better to open a command-window and type the flash.bat command. If there are any errors you will still have them on-screen.
Thank you for all the help and support. I didn't get a chance to flash the rom till now (being on a vacation without a smartphone sucks). But I'll try it asap and report back.
So, how did it go?
TrymHansen said:
So, how did it go?
Click to expand...
Click to collapse
I haven't flashed it yet. I've decided to do it after I return home. I'm at my friend's house for 2 more days.
Ok, bad news. I flashed the stock rom you linked. The process went pretty smoothly. After the window got closed and the lg logo on the phone was visible 2 times, I unplugged it and installed the battery. But switching it on wasn't fruitful. It just displayed the LG logo for a couple of seconds and then the screen went off (just like before, only faster). I tried repeating the whole process, even tried to nvflash cwm once again, but nothing happened.
So is it a hardware issue? My phone is no longer in warranty period, so a hardware problem would be really bad...
So is it a hardware issue?
Click to expand...
Click to collapse
I don't know.
What would be helpful is to get a copy of the output you get when you NVFlash, it's simply the only way to verify that the flash process went ok. If you have an aborted flash it of course won't work, and may display the behaviour you describe.
EDIT: Btw, early on there were some ROMs which refused to boot properly unless the baseband was of an early variety as well.
If you feel confident the NVFlash has been successfull, smartflash an old baseband as well, see if it boots then.
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
gabriel2anjos said:
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
Click to expand...
Click to collapse
Now what's this "Jtag service"? (edit- I googled it and it seems to be a method of un-bricking stuff with specialized hardware or something, but I'm not sure I can have that done where I live)
Is there any way to fix the bootloader by myself?
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
sean8000 said:
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
Click to expand...
Click to collapse
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
TrymHansen said:
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
Click to expand...
Click to collapse
Ok, I'll try that when I have the time.
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
sean8000 said:
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
Click to expand...
Click to collapse
If it is you're only the second person in this forum to ever brick his phone. Anything's possible I guess. Some flash cells may have been damaged the first time the power was yanked. But then we should presumably get some verification errors during flashing.
Anyway, I'm at my wits end, and I really do hope you get it up and running, but I don't have anything more to contribute. Good luck.
Corrupted bootloader means that your cellphone simply don't know what to do when you hit the power button, due to the damage. As the cell phone can't turn, the pc can't recognize it. If your cell phone were a samsung, you could try to use a jig to have acesso to the download mode. But I don't know if it would work for a LG. You could try anyway.
And if you live at big city, usually it's common to have some jtag services.
Please, dont be afraid of hitting thanks
Please, dont be afraid of hitting thanks
Ok, so I took the phone to the service center today. The guys there said its battery terminals are messed up. They said replacement terminals are not easily available, but they'll try to find some. And of course I'll have to pay for it. I guess it's still better than using the phone as a paperweight.
What do you guys think?
Good luck I managed to mess up my phone like you too. I'm from India. But the difference was that I was covered by warranty. I managed to get a bunch of hardware replaced and was up and running again.
Hi all,
Wondering if anyone could help me. On the Samsung ATIV Odyssey I have, when it boots, it will show, Windows Phone, Samsung screen then just shows the spinning gears..this will go on forever. I tried to reset and "tried" to hard reset it but could never get the "!" To show up.
Is there any way possible to recover this phone or am I stuck having to send it out to Samsung?
I have not been able to get anywhere with this phone and can't find recovery software like Nokia has for their phones for Samsung models....
Thanks in advance!!
Can anyone help with this issue ?
I ended up calling Samsung, the phone is out of warranty (of course) but, they say they will do a free one time flash to attempt to recover the phone. The provided free shipping and will flash it and return the phone to me at no charge.
Nice, didn't know they offered that....
DavidinCT said:
I ended up calling Samsung, the phone is out of warranty (of course) but, they say they will do a free one time flash to attempt to recover the phone. The provided free shipping and will flash it and return the phone to me at no charge.
Nice, didn't know they offered that....
Click to expand...
Click to collapse
If 'someplace in CT' means 'quacche patte a Catania vicinu a fera o luni' we live in a similar place
Anyway you can get informed better here:
http://forum.xda-developers.com/showthread.php?t=2692049
Take a Flash tool. more infos here(the procedure should be the same for the odissey)
http://forum.xda-developers.com/showthread.php?t=2391138
You can try to flash the fake wolfROM with the customwolfROM.csc(or mbn, I don't remember) for Odissey (You'll find it in the first thread i've linked you)
OF COURSE FOLLOW THE GUIDE NOT TO BRICK MORE YOU DEVICE.
If you have any problems you can ask.
Thanks, does the Odyssey (SCH-I930) can be flashed with the roms for the ATIV S ? Interesting, If I can get this phone up and running again, I might try to go the ROOT route if I can. That is if it can be recovered.
2 computers would not even detect this phone because of it being a reboot loop. So even if I had a rom or something else for it, the computer would not even see it.
Not my primary phone, so no big rush if I have to wait for a week...
DavidinCT said:
Thanks, does the Odyssey (SCH-I930) can be flashed with the roms for the ATIV S ? Interesting, If I can get this phone up and running again, I might try to go the ROOT route if I can. That is if it can be recovered.
2 computers would not even detect this phone because of it being a reboot loop. So even if I had a rom or something else for it, the computer would not even see it.
Not my primary phone, so no big rush if I have to wait for a week...
Click to expand...
Click to collapse
NO IT CAN'T OF COURSE BE FLASHED WITH OTHER PHONES' ROMS BUT IF YOU KEEP READING ALL THE PAGES OF THE THREADS I'VE LINKED YOU YOU'LL LEARN THAT WOLF MADE OTHER CUSTOM CSCs(the smallest,editable part of a WP rom) SPECIFIC FOR YOUR DEVICE AND HOW TO FLASH 'EM
(I wrote with caps lock in order to let you get the importance of the point )
It's normal that every pc doesn't see your phone:something in its os is missing.I would advice you to flash another csc -description in this the customwolf rom thread I've already link to you -(see the specific combination of your model in order to know if your phone turns on in download modus and you can try to flash again it)
EDIT----
Sorry man,I just Thought now to it: You could simplify your life just trying first a Hard reset from buttons combination (I think this is the correct one,but you can search for yourself for the specific combination of buttons of your phone).
Alternate Method
Step 1
Turn off the phone and wait 15 seconds.
Step 2
Press the "Power" button. Press and hold the Volume Down button until an exclamation mark appears on the screen.
Step 3
Press the Volume Up button and then press the Volume Down button. Press the Power button and then press the Volume Down button again. The screen goes black and then the reset process completes.
In this way you should be able to HR your device without turning it on and risking to damage it more with flashing
gidannifico said:
NO IT CAN'T OF COURSE BE FLASHED WITH OTHER PHONES' ROMS BUT IF YOU KEEP READING ALL THE PAGES OF THE THREADS I'VE LINKED YOU YOU'LL LEARN THAT WOLF MADE OTHER CUSTOM CSCs(the smallest,editable part of a WP rom) SPECIFIC FOR YOUR DEVICE AND HOW TO FLASH 'EM
(I wrote with caps lock in order to let you get the importance of the point )
It's normal that every pc doesn't see your phone:something in its os is missing.I would advice you to flash another csc -description in this the customwolf rom thread I've already link to you -(see the specific combination of your model in order to know if your phone turns on in download modus and you can try to flash again it)
EDIT----
Sorry man,I just Thought now to it: You could simplify your life just trying first a Hard reset from buttons combination (I think this is the correct one,but you can search for yourself for the specific combination of buttons of your phone).
Alternate Method
Step 1
Turn off the phone and wait 15 seconds.
Step 2
Press the "Power" button. Press and hold the Volume Down button until an exclamation mark appears on the screen.
Step 3
Press the Volume Up button and then press the Volume Down button. Press the Power button and then press the Volume Down button again. The screen goes black and then the reset process completes.
In this way you should be able to HR your device without turning it on and risking to damage it more with flashing
Click to expand...
Click to collapse
Thanks again for your help here !!!!!!!!!!!!!!! The hard reset is not working. I tried this MANY time before posting (after about a day playing with it, at the point of giving up hope). I can try the key commands but, at no point will I EVER see the exclamation mark. No kidding, I must of tried this 40 different ways, with different timing, I can 100% confirm that something is screwy with this phone.
If I do the Power plus volume down (to try to get the exclamation mark), as soon as a let go of the power button and holding the vol down, the phone will go in a reboot loop.
The phone does not get to a point where the PC will detect it, it will start to boot up and it will show on the display Windows Phone, then Samsung logo, then it will just show the spinning gears(like it had a failed update). It does this for ever (I let it go 24 hours before pulling it). I can do the soft reset but, that is it...
It's packed up ready to go but, I'll hold it for a day, do you think I could actually recover this phone with a rom ?
DavidinCT said:
Thanks again for your help here !!!!!!!!!!!!!!! The hard reset is not working. I tried this MANY time before posting (after about a day playing with it, at the point of giving up hope). I can try the key commands but, at no point will I EVER see the exclamation mark. No kidding, I must of tried this 40 different ways, with different timing, I can 100% confirm that something is screwy with this phone.
If I do the Power plus volume down (to try to get the exclamation mark), as soon as a let go of the power button and holding the vol down, the phone will go in a reboot loop.
The phone does not get to a point where the PC will detect it, it will start to boot up and it will show on the display Windows Phone, then Samsung logo, then it will just show the spinning gears(like it had a failed update). It does this for ever (I let it go 24 hours before pulling it). I can do the soft reset but, that is it...
It's packed up ready to go but, I'll hold it for a day, do you think I could actually recover this phone with a rom ?
Click to expand...
Click to collapse
I really don't know because I don't have the phone in front of me,so I can't 'think' to anything.
I just know that People flashed the custom csc..who knows,that could be Your solution-but could be not-.
I recommend you to read very well and many times the procedure.
Good luck and let me know.
gidannifico said:
I really don't know because I don't have the phone in front of me,so I can't 'think' to anything.
I just know that People flashed the custom csc..who knows,that could be Your solution-but could be not-.
I recommend you to read very well and many times the procedure.
Good luck and let me know.
Click to expand...
Click to collapse
Yea, I tried everything I could find in google and Bing...No luck, I'll send it back to Samsung to see if they can recover the phone....
Thanks again for your help. When I get it back, if it's running, then I will try to interop it....
DavidinCT said:
Yea, I tried everything I could find in google and Bing...No luck, I'll send it back to Samsung to see if they can recover the phone....
Thanks again for your help. When I get it back, if it's running, then I will try to interop it....
Click to expand...
Click to collapse
You're welcome
When the phone will be perfectly working you 'll be able to interop it with wolf's custom csc (the thread I've linked to you)
Cheers
BTW, I have the custom rom for the Odyssey, its definitely got some odd bugs.
Verizon stores can reflash it for you too for free, just need to hit up a Verizon CORPORATE store. Apparently they have the tools and the ROM, instead of waiting for it to be mailed and come back.
Well I used the wolf custom rom and follow the exactly instructions but my phone now say is corrupted, and instead of boat show me a message telling me that!
So, I got another one and now has the same problem, so, somebady knows if there is at day an original rom available?
Still no public Odyssey ROM yet.