I'm a complete noob in dire need of help. I wanted to root my phone, and read the 3 procedures mentioned in the sticky thread. The 2nd one (nvflash) seemed very well explained and was sure to work with 2.3.4 so I decided to use that. As I was in my friend's house I used his pc and installed the drivers while my phone was connected in apx mode. Then I double clicked the "install internal xp" batch file which resulted in a black window with some texts, but seeing this my friend freaked out and closed the window before the process was finished. I told him he shouldn't have done that. I then disconnected the phone and switched it on. It seemed to switch on properly. So I then switched it off again and pressed and held the power and vol down switches to see if I got cwm. This showed LG screen for a few seconds and then the screen went off.
Now whatever I try to do I can only see the LG screen for a few seconds and then the screens goes off. No power on, no recovery, no nothing. And I can only attempt to even power on once, after the screen goes off I must remove the battery before the power button does anything again.
I tried to freshly nvflashing the recovery many times, but it made no difference. Does this mean my phone is bricked? Please tell me how I can solve this as I'm really worried.
NVFlashing the recovery again *should* have worked. So we first need to make sure you're trying to start CWM the correct way.
1) Unplug phone
2) Remove battery for 10 seconds.
3) Insert battery
4) Hold volume-down, do not let go, keep pressing it.
5) Press power button, keep it pressed.
If/when you get the second LG-logo, bluish halo, you can release both buttons, not before.
Nope, that was exactly what I was doing to access the recovery. I tried it again just now and it didn't work.
It just displayed the regular LG logo and then the screen went off. I'm not sure the phone completely shuts down 'cause if I keep it like that it gets quite hot and I can't use the power button again to try to power up. Only removing and re-inserting the battery gives me another attempt.
Is there any chance this is a hardware issue?
Hardly any chance this is hardware related if it was working before the first NVFlash.
Good, next step will be to NVFlash a complete stock ROM. You will unfortunately lose any data you might have on it, but that's the price to pay.
Go here, follow the instructions precisely, skip installation of apx-driver. Report back.
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
sean8000 said:
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
Click to expand...
Click to collapse
It works, yes, but is the original Froyo. This is just a way to get the phone up and running again.
Later you have a few choices. Either install CWM, then install you ROM of choice, or upgrade it to the latest for your region by using the LG Update tool.
EDIT. Oh, and btw, it is better to open a command-window and type the flash.bat command. If there are any errors you will still have them on-screen.
Thank you for all the help and support. I didn't get a chance to flash the rom till now (being on a vacation without a smartphone sucks). But I'll try it asap and report back.
So, how did it go?
TrymHansen said:
So, how did it go?
Click to expand...
Click to collapse
I haven't flashed it yet. I've decided to do it after I return home. I'm at my friend's house for 2 more days.
Ok, bad news. I flashed the stock rom you linked. The process went pretty smoothly. After the window got closed and the lg logo on the phone was visible 2 times, I unplugged it and installed the battery. But switching it on wasn't fruitful. It just displayed the LG logo for a couple of seconds and then the screen went off (just like before, only faster). I tried repeating the whole process, even tried to nvflash cwm once again, but nothing happened.
So is it a hardware issue? My phone is no longer in warranty period, so a hardware problem would be really bad...
So is it a hardware issue?
Click to expand...
Click to collapse
I don't know.
What would be helpful is to get a copy of the output you get when you NVFlash, it's simply the only way to verify that the flash process went ok. If you have an aborted flash it of course won't work, and may display the behaviour you describe.
EDIT: Btw, early on there were some ROMs which refused to boot properly unless the baseband was of an early variety as well.
If you feel confident the NVFlash has been successfull, smartflash an old baseband as well, see if it boots then.
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
gabriel2anjos said:
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
Click to expand...
Click to collapse
Now what's this "Jtag service"? (edit- I googled it and it seems to be a method of un-bricking stuff with specialized hardware or something, but I'm not sure I can have that done where I live)
Is there any way to fix the bootloader by myself?
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
sean8000 said:
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
Click to expand...
Click to collapse
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
TrymHansen said:
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
Click to expand...
Click to collapse
Ok, I'll try that when I have the time.
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
sean8000 said:
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
Click to expand...
Click to collapse
If it is you're only the second person in this forum to ever brick his phone. Anything's possible I guess. Some flash cells may have been damaged the first time the power was yanked. But then we should presumably get some verification errors during flashing.
Anyway, I'm at my wits end, and I really do hope you get it up and running, but I don't have anything more to contribute. Good luck.
Corrupted bootloader means that your cellphone simply don't know what to do when you hit the power button, due to the damage. As the cell phone can't turn, the pc can't recognize it. If your cell phone were a samsung, you could try to use a jig to have acesso to the download mode. But I don't know if it would work for a LG. You could try anyway.
And if you live at big city, usually it's common to have some jtag services.
Please, dont be afraid of hitting thanks
Please, dont be afraid of hitting thanks
Ok, so I took the phone to the service center today. The guys there said its battery terminals are messed up. They said replacement terminals are not easily available, but they'll try to find some. And of course I'll have to pay for it. I guess it's still better than using the phone as a paperweight.
What do you guys think?
Good luck I managed to mess up my phone like you too. I'm from India. But the difference was that I was covered by warranty. I managed to get a bunch of hardware replaced and was up and running again.
Related
Ok guys, I feel this is just the end of the games... I was flashing back the Roto JME fw with the swype keyboard issue fixed that I have just made, when I accidentally unplugged the tab while starting flashing and in downloading mode.
Now all I get is a logo with a phone an alert symbol and a computer .
Windows as well as Odin see it, but I can't do anything, as Odin hangs on waiting for connection, or something like that.
Is there anything I can do?? Or do I really have to take it to the warranty? And if I will have to take it to the warranty will they see I have previously flashed a beta rooted image on it??
Here's what I am talking about
Please I need some help..
Thanks
Is there no recovery mode by buttons like the captivate? I hate seeing all the bricks
Sent from my SPH-P100 using XDA App
Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d
Technomancer said:
Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d
Click to expand...
Click to collapse
damn it says Failed to access device. Error: -12 .. I am on windows with latest version of heimdall ...
Segnale007 said:
damn it says Failed to access device. Error: -12 .. I am on windows with latest version of heimdall ...
Click to expand...
Click to collapse
Ops, it was the driver... damn windows ...
Solved btw.. I just realized I have lots of things to learn ... I have almost died of heart attack when I saw my tab stucked on that logo.. and now its back again..
Thank u falks
You need to make sure samsung kies are not running for sure unistall it and try it again
use odin. that is still download mode. might take you a couple of tries but works. i was in your shoes the other day
Everything is fixed thanks to Tecnomancer. Thank u guys
Sent from my GT-P1000 using XDA App
Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Segnale007 said:
Everything is fixed thanks to Tecnomancer. Thank u guys
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
I've heard plenty of goofy stories about bricking devices over the years. You must conclude the following:
1.Flash your device in a locked room to avoid your wife/ child pulling cables or pressing buttons.
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
3.Read instructions carefully and write the procedure out in your own words if its your first time.
I've been flashing for years and haven't had a brick yet. Not crossing my fingers either because it has little to do with luck and much to do with care. In this way its a lot like making babies...
ftgg99 said:
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
Click to expand...
Click to collapse
Good advice.
My only semi-bricks (that involved an hour or two of trial and error to unbrick) resulted from some manner of overzealous cable unplugging.
zyborg said:
Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Click to expand...
Click to collapse
This is what I have done
Technomancer said:
Its not bricked
heimdall close-pc-screen
should restart it
then power it off
then put it into download mode again using power + volume down
-d
Click to expand...
Click to collapse
ftgg99 said:
2.Don't touch anything while you're flashing. This is why many people that could help you will ignore you after reading about 'accidentally disconnected' wires - they just assume you're a moron not worth helping.
Click to expand...
Click to collapse
Well, first of all thanks for ur nice words. Let me just say that I was about to disconnect another device from the hub where the GTAB was attached and flashing at that time, and yea, I accidentally unplugged the GTAB instead of the other device. I may be a moron, thanks, and thankfully not everyone believes themselves as god, which is a good reason to not help other people who are in troubles, even if for stupid things sometimes... If everyone were thinking like u we were probably still at the age of 1400 ...
Mate it wasn't a barb directed at you personally, but you weren't exactly careful were you?
I'm no god... but I've never bricked a device either, and I've been flashing for over five years now. To top it off I've almost never owned a device which could be taken back to the shop (90% of them come from other countries, not my local retailers). Perhaps this has taught me to be careful.
In any case, what I said holds true, and if you ask around I'm certain you find most will agree.
Dude, you have the best avatar! I can't keep my eyes away! Good luck, and don't worry about mistakes - that is one reason this forum exists.
Cannot start my Gtab after trying update JMC
...Hello everybody,
I am really worry about the fact my Gtab doesn't want to switch on after trying to flash it. I tried all process to put it on download mode or recovery but nothing work.
Do you have any idea about it ? Is there a specific procedure to switch on (eg : press power for 1 minutes + blablabla).
My provider doesn't want to take my Gtab in warenty before my contract is activated (the 4th of february).
Thank you for your answer
HELP, I have same problem, please explain how Hemidall can fix it?
Thanks
[email protected]
zyborg said:
Could you please list the steps you went through in order to fix this - for everyone else's sake? Thx!
Click to expand...
Click to collapse
I also had a semi-bricked VZW Tab, with the phone-triangle-computer warning graphic at start up. (I flashed a new boot loader, and failed to read the instructions closely enough. Either the file was incorrect for my device, or the drivers were not loaded correctly, but my tablet was borked.)
Using heimdall 1.3.2 (with the correct drivers, on a 32-bit windows system), I clicked the "close pc screen" option to clear the warning.
I then held the power button until it turned off, then held vol+ and power to re-enter download mode. Once in download mode, I used heimdall 1.1.1 to flash the zImage from SCH-I800-Stock-Rooted-2.3.5. My tablet (still unrooted, and still stock?) booted, but sat at the SAMSUNG logo for ten minutes or more. (It announced its progress, telling me periodically "five minutes remaining", etc.)
Once it finished, my tablet was revived. I will now follow the above advice and read all instructions very carefully, re-writing them in my own words to ensure I understand what I'm doing, before I try this again.
One year old thread......do you guys ever watch posting dates???
Sent from my GT-P1000 using Tapatalk 2
...like REALLY bricked
bumping this old thread in hopes that someone can point me in the right direction...
Got my p7510 (10.1" wifi retail) stuck pretty badly when trying to restore stock ROM coming from Overcome (it came rooted from ebay). From what I gather from the forums, seems like my bootloader is still locked.
whenever I attempt to flash a BOOTLOADER, PIT, or PDA using ODIN it connects, initializes, and gets stuck on "Flashing boot.img"
I think the recovery partition is damaged. When I boot using Power + Volume Down, I can get to the screen where you select recovery mode or download mode but recovery mode will not load. The screen flickers when I select recovery, but goes nowhere. Download mode works.
I tried using nvflash to force the right software onto it but I get error 0x4 (usb write failed).
There has to be a way to restore the stock bootloader and get this thing running again. Tablet will not boot android at this point. I have been searching the forums for about a week now, anyone have any ideas?
The story so far...
Bought a new Optimus Black and gave it to my girlfriend for her birthday a couple of days ago. After playing with it for about an hour she put it down, I picked it up and decided to have a tinker. I installed Cyanogen mod 3.5.1 after rooting it with Gingerbreak. So far so good but I didn't really like the look of the ROM and the absence of a Market seemed like hassle so I used ClockworkMod to restore the backed up stock ROM.
It's still working fine but now I see there is an official update from inside the phone. I presume it's the upgrade to Android 2.3 so run it and reboot the phone. That's when it all goes wrong. I'm now stuck in the CWM recovery screen. I try all the options, following any online guides I can find that were supposed to have worked for people. I try restoring the backup, restoring cyanogen, clearing the cache, dalvik, everything but nothing happens and I keep booting back into the CWM recovery screen.
Next day I try the LGUnitedMobileDriver and the phone recovery option but despite trying several times I can get no further. A friend tried to use Odin to restore it but got no success. Finally, we tried restoring with a KDZ file with
KDZ_FW_UPD_EN, Windows Enabler and LG B2CTool and now the phone got stuck in yet another loop - a black screen with 'updating firmware'. The LEDs flash for a minute and it reboots and does the same again.
What's more, the phone will now no longer charge or turn on without being connected to the mains.
What are my options here?
Follow the tutorial given below.
http://forum.xda-developers.com/showthread.php?t=1275315
Thanks, but I've already tried that and it doesn't work. I'm forever stuck in the firmware update screen.
pickarooney said:
Thanks, but I've already tried that and it doesn't work. I'm forever stuck in the firmware update screen.
Click to expand...
Click to collapse
have you tried the CS_EMERGENCY option in R&D TOOLS? Wait I'll find the link..
Here >>> http://forum.xda-developers.com/showpost.php?p=18841596&postcount=8
http://forum.xda-developers.com/showpost.php?p=18740082&postcount=45
The CS_EMERGENCY is the only thing worked, he used a german V10A ROM. If you managed to unbrick it, you can flash it again with your desired KDZ, or use CS_EMERGENCY and flash directly your desired KDZ. TRIAL AND ERROR.
Emergency c-section... nope, I will try that now!
Said that it will get stuck at 4% but it is still flashing. Just wait for the phone to reboot by itself.
It just crashes with a fatal error as soon as it gets to the second tab (downloading) on both PCs I tried it on. I tried several KDZ files with the same result.
Does anyone know if it's possible to physically change the ROM on this phone and if it would be worth trying that before binning the thing?
pickarooney said:
Does anyone know if it's possible to physically change the ROM on this phone and if it would be worth trying that before binning the thing?
Click to expand...
Click to collapse
Does it have warranty? Why not RMA it, I think it has a hardware problem now since you mentioned it doesn't charge anymore. Also, have you tried a different USB cable?
The warranty gets voided as soon as you root or mod a phone and it's probably as expensive to get it fixed outside of warranty as to buy a new one.
pickarooney said:
The warranty gets voided as soon as you root or mod a phone and it's probably as expensive to get it fixed outside of warranty as to buy a new one.
Click to expand...
Click to collapse
Most of the time they change the board right away if it can't boot (as many as I've read) board was changed and none just revived the OS. So they won't know you rooted it. Just specify that they should contact you first before making any changes.
gabwerkz said:
Most of the time they change the board right away if it can't boot (as many as I've read) board was changed and none just revived the OS. So they won't know you rooted it. Just specify that they should contact you first before making any changes.
Click to expand...
Click to collapse
true.. you can just tell them that you received an update and upon getting it the phone wont boot anymore.. just dont tell them that you rooted it or tinkered it in any way.. i'm sure you'll be able to get your warranty that way..
darkzorn said:
true.. you can just tell them that you received an update and upon getting it the phone wont boot anymore.. just dont tell them that you rooted it or tinkered it in any way.. i'm sure you'll be able to get your warranty that way..
Click to expand...
Click to collapse
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
pickarooney said:
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
Click to expand...
Click to collapse
Fingers crossed for you !!!
pickarooney said:
Well, that's exactly what I did so we'll see in two weeks if I get a fixed phone free of charge
Click to expand...
Click to collapse
IT will mostly work..Good luck though and please do reply here and let us know if it worked..
I tried flashing the ics source port but forgot to flash cm7 first... It flashed fine and I followed the procedure to flash. The phone would turn on but always go straight to recovery. I figured this was because I didn't go to cm7 first, so I went to flash it but I kept getting errors. I went to flash stock, it started going so I walked away. When I came back my phone was just a white screen and odin was stuck at sbl.bin. So now I can't boot up the phone, there's no bootloaders, just a black screen whenever I try to do anything. The thing is, I can get into download mode just fine through button combos which leads me to think it's not bricked. However, odin/heimdall will not recognize it... Anyone know what to do?
EDIT: View last post by me.
mikel.canovas said:
I tried flashing the ics source port but forgot to flash cm7 first... It flashed fine and I followed the procedure to flash. The phone would turn on but always go straight to recovery. I figured this was because I didn't go to cm7 first, so I went to flash it but I kept getting errors. I went to flash stock, it started going so I walked away. When I came back my phone was just a white screen and odin was stuck at sbl.bin. So now I can't boot up the phone, there's no bootloaders, just a black screen whenever I try to do anything. The thing is, I can get into download mode just fine through button combos which leads me to think it's not bricked. However, odin/heimdall will not recognize it... Anyone know what to do?
Click to expand...
Click to collapse
Try the things listed in the "connectivity issues" post attached to my signature. If none of those works to get Odin/Heimdall to see your phone, post back.
followed it. Didn't recognize for like a minute then it showed up. I started it but it's stuck at do not turn off the target
tried again and same thing
What is it showing on the computer side (i.e. what is Odin/Heimdall saying right now)?
I'm using odin right now. But heimdal would always just say not recognized or whatever it says. Odin, when I get it to finally recognize after waiting a minute using your method, it just gets to DO NOT TURN OFF TARGET! and stalls there.
I got it to work. No clue what made it finally work
mikel.canovas said:
I got it to work. No clue what made it finally work
Click to expand...
Click to collapse
Good to hear. I know the feeling - it's like the computer/phone are just messing with you.
Damn. A similar thing happened. I had to flash to stock since button combos weren't working, and all the sudden while odin was running my screen just went black. I waited to see if anything would happen, but everything just stalled there. I've been trying to use my homemade 100k ohm resistor jig, and button combos to get into download mode but nothing seems to be doing anything. Am I bricked?
If u have no signs of life at all (no battery charging screen when u plug into a wall charger or no kind of something happening if u try to power it on) then u r hard bricked.
But there is Jtag and the Unbrickable Mod.
4-2ndtwin said:
If u have no signs of life at all (no battery charging screen when u plug into a wall charger or no kind of something happening if u try to power it on) then u r hard bricked.
But there is Jtag and the Unbrickable Mod.
Click to expand...
Click to collapse
Thanks, not what I wanted to hear. But okay.
mikel.canovas said:
Thanks, not what I wanted to hear. But okay.
Click to expand...
Click to collapse
Its cheap and keeps your phone from ever being unrecoverable again, it is better than paying the $150 for a replacement.
Sent from my I897 using xda premium
Yeah and seeing as how I'm planning on doing a bunch of development on it once I get another phone, I'm probably going to need it.
I have it and it does come in handy
Sent from my I897 using xda premium
mikel.canovas said:
Yeah and seeing as how I'm planning on doing a bunch of development on it once I get another phone, I'm probably going to need it.
Click to expand...
Click to collapse
Sometimes, if you get a lucky brick, the UnBrickable resurrector will work without any mod. This is rare, but its a shot. If you need a mod and don't have the tools, pm me.
AdamOutler said:
Sometimes, if you get a lucky brick, the UnBrickable resurrector will work without any mod. This is rare, but its a shot. If you need a mod and don't have the tools, pm me.
Click to expand...
Click to collapse
Thanks, will try that next time. Luckily AT&T exchanged it for me
mikel.canovas said:
Thanks, will try that next time. Luckily AT&T exchanged it for me
Click to expand...
Click to collapse
I had something similar happen to me,when I was running A6 or A7. I even noticed that I was losing folders that were visible on CWM. I was going to try to re-flash the ROM, but those folders were gone. What fixed it for me, was I did a Factory Reset, and al of the lost folders came back, and I was able to Odin back to stock. I was one of the more weird things I'd seen with my Cap
I was attempting to flash the ICS4 ROM. I had formatted /system and was done with installing the from from zip. Before I could do anything else, the phone just stopped being responsive. I pulled and restored the battery but the phone will not boot up. What to do now, short of going to my VZW store?
When you say it doesnt boot.. what exactly do you mean? Does anything come up on the screen?
nothing comes when you press the power button, screen remains blank.
ronaldheld said:
nothing comes when you press the power button, screen remains blank.
Click to expand...
Click to collapse
Did you try booting up into recovery and then going to fastboot and reinstalling the stock fxz file to see if that fixed it?
Sure the battery didn't die also?
The phone does not boot into recovery. Pressing the power button does nothing at all, as far as I can see.
I found out that the phone is literally fried. Whether the ICS4 ROM contributed is unknown.
You are most likely covered under manufacturer warranty - seems like a hardware failure. Never known of a ROM flash to fry a phone's board.
They also most likely won't know you even tried to flash a custom ROM.
That part is very good to know.
I will have restart again with rooting, and proceed with flashing Eclipse 2.2.
Is the place you live in very statically charged? When you touch metal do you get shocked alot?
If you touched the battery ports it could have discharged into the phones board and killed it.
Let us know what they do for you.
ronaldheld said:
That part is very good to know.
I will have restart again with rooting, and proceed with flashing Eclipse 2.2.
Click to expand...
Click to collapse
Compared to everything else we do here at XDA, the process to get rooted and flash a ROM is very basic. Getting the phone back up and running is the more difficult part.
What I can say to try is attempt to use a different battery. I had a problem once where both of my batteries functioned properly because I was able to test them in other phones. But when I placed that specific battery into my phone, it wouldn't boot up. I ended up using a different battery and was then able to boot into AP Fastboot and fxz to fix it. Then my "dysfunctional" battery worked properly again.
Hi all,
Wondering if anyone could help me. On the Samsung ATIV Odyssey I have, when it boots, it will show, Windows Phone, Samsung screen then just shows the spinning gears..this will go on forever. I tried to reset and "tried" to hard reset it but could never get the "!" To show up.
Is there any way possible to recover this phone or am I stuck having to send it out to Samsung?
I have not been able to get anywhere with this phone and can't find recovery software like Nokia has for their phones for Samsung models....
Thanks in advance!!
Can anyone help with this issue ?
I ended up calling Samsung, the phone is out of warranty (of course) but, they say they will do a free one time flash to attempt to recover the phone. The provided free shipping and will flash it and return the phone to me at no charge.
Nice, didn't know they offered that....
DavidinCT said:
I ended up calling Samsung, the phone is out of warranty (of course) but, they say they will do a free one time flash to attempt to recover the phone. The provided free shipping and will flash it and return the phone to me at no charge.
Nice, didn't know they offered that....
Click to expand...
Click to collapse
If 'someplace in CT' means 'quacche patte a Catania vicinu a fera o luni' we live in a similar place
Anyway you can get informed better here:
http://forum.xda-developers.com/showthread.php?t=2692049
Take a Flash tool. more infos here(the procedure should be the same for the odissey)
http://forum.xda-developers.com/showthread.php?t=2391138
You can try to flash the fake wolfROM with the customwolfROM.csc(or mbn, I don't remember) for Odissey (You'll find it in the first thread i've linked you)
OF COURSE FOLLOW THE GUIDE NOT TO BRICK MORE YOU DEVICE.
If you have any problems you can ask.
Thanks, does the Odyssey (SCH-I930) can be flashed with the roms for the ATIV S ? Interesting, If I can get this phone up and running again, I might try to go the ROOT route if I can. That is if it can be recovered.
2 computers would not even detect this phone because of it being a reboot loop. So even if I had a rom or something else for it, the computer would not even see it.
Not my primary phone, so no big rush if I have to wait for a week...
DavidinCT said:
Thanks, does the Odyssey (SCH-I930) can be flashed with the roms for the ATIV S ? Interesting, If I can get this phone up and running again, I might try to go the ROOT route if I can. That is if it can be recovered.
2 computers would not even detect this phone because of it being a reboot loop. So even if I had a rom or something else for it, the computer would not even see it.
Not my primary phone, so no big rush if I have to wait for a week...
Click to expand...
Click to collapse
NO IT CAN'T OF COURSE BE FLASHED WITH OTHER PHONES' ROMS BUT IF YOU KEEP READING ALL THE PAGES OF THE THREADS I'VE LINKED YOU YOU'LL LEARN THAT WOLF MADE OTHER CUSTOM CSCs(the smallest,editable part of a WP rom) SPECIFIC FOR YOUR DEVICE AND HOW TO FLASH 'EM
(I wrote with caps lock in order to let you get the importance of the point )
It's normal that every pc doesn't see your phone:something in its os is missing.I would advice you to flash another csc -description in this the customwolf rom thread I've already link to you -(see the specific combination of your model in order to know if your phone turns on in download modus and you can try to flash again it)
EDIT----
Sorry man,I just Thought now to it: You could simplify your life just trying first a Hard reset from buttons combination (I think this is the correct one,but you can search for yourself for the specific combination of buttons of your phone).
Alternate Method
Step 1
Turn off the phone and wait 15 seconds.
Step 2
Press the "Power" button. Press and hold the Volume Down button until an exclamation mark appears on the screen.
Step 3
Press the Volume Up button and then press the Volume Down button. Press the Power button and then press the Volume Down button again. The screen goes black and then the reset process completes.
In this way you should be able to HR your device without turning it on and risking to damage it more with flashing
gidannifico said:
NO IT CAN'T OF COURSE BE FLASHED WITH OTHER PHONES' ROMS BUT IF YOU KEEP READING ALL THE PAGES OF THE THREADS I'VE LINKED YOU YOU'LL LEARN THAT WOLF MADE OTHER CUSTOM CSCs(the smallest,editable part of a WP rom) SPECIFIC FOR YOUR DEVICE AND HOW TO FLASH 'EM
(I wrote with caps lock in order to let you get the importance of the point )
It's normal that every pc doesn't see your phone:something in its os is missing.I would advice you to flash another csc -description in this the customwolf rom thread I've already link to you -(see the specific combination of your model in order to know if your phone turns on in download modus and you can try to flash again it)
EDIT----
Sorry man,I just Thought now to it: You could simplify your life just trying first a Hard reset from buttons combination (I think this is the correct one,but you can search for yourself for the specific combination of buttons of your phone).
Alternate Method
Step 1
Turn off the phone and wait 15 seconds.
Step 2
Press the "Power" button. Press and hold the Volume Down button until an exclamation mark appears on the screen.
Step 3
Press the Volume Up button and then press the Volume Down button. Press the Power button and then press the Volume Down button again. The screen goes black and then the reset process completes.
In this way you should be able to HR your device without turning it on and risking to damage it more with flashing
Click to expand...
Click to collapse
Thanks again for your help here !!!!!!!!!!!!!!! The hard reset is not working. I tried this MANY time before posting (after about a day playing with it, at the point of giving up hope). I can try the key commands but, at no point will I EVER see the exclamation mark. No kidding, I must of tried this 40 different ways, with different timing, I can 100% confirm that something is screwy with this phone.
If I do the Power plus volume down (to try to get the exclamation mark), as soon as a let go of the power button and holding the vol down, the phone will go in a reboot loop.
The phone does not get to a point where the PC will detect it, it will start to boot up and it will show on the display Windows Phone, then Samsung logo, then it will just show the spinning gears(like it had a failed update). It does this for ever (I let it go 24 hours before pulling it). I can do the soft reset but, that is it...
It's packed up ready to go but, I'll hold it for a day, do you think I could actually recover this phone with a rom ?
DavidinCT said:
Thanks again for your help here !!!!!!!!!!!!!!! The hard reset is not working. I tried this MANY time before posting (after about a day playing with it, at the point of giving up hope). I can try the key commands but, at no point will I EVER see the exclamation mark. No kidding, I must of tried this 40 different ways, with different timing, I can 100% confirm that something is screwy with this phone.
If I do the Power plus volume down (to try to get the exclamation mark), as soon as a let go of the power button and holding the vol down, the phone will go in a reboot loop.
The phone does not get to a point where the PC will detect it, it will start to boot up and it will show on the display Windows Phone, then Samsung logo, then it will just show the spinning gears(like it had a failed update). It does this for ever (I let it go 24 hours before pulling it). I can do the soft reset but, that is it...
It's packed up ready to go but, I'll hold it for a day, do you think I could actually recover this phone with a rom ?
Click to expand...
Click to collapse
I really don't know because I don't have the phone in front of me,so I can't 'think' to anything.
I just know that People flashed the custom csc..who knows,that could be Your solution-but could be not-.
I recommend you to read very well and many times the procedure.
Good luck and let me know.
gidannifico said:
I really don't know because I don't have the phone in front of me,so I can't 'think' to anything.
I just know that People flashed the custom csc..who knows,that could be Your solution-but could be not-.
I recommend you to read very well and many times the procedure.
Good luck and let me know.
Click to expand...
Click to collapse
Yea, I tried everything I could find in google and Bing...No luck, I'll send it back to Samsung to see if they can recover the phone....
Thanks again for your help. When I get it back, if it's running, then I will try to interop it....
DavidinCT said:
Yea, I tried everything I could find in google and Bing...No luck, I'll send it back to Samsung to see if they can recover the phone....
Thanks again for your help. When I get it back, if it's running, then I will try to interop it....
Click to expand...
Click to collapse
You're welcome
When the phone will be perfectly working you 'll be able to interop it with wolf's custom csc (the thread I've linked to you)
Cheers
BTW, I have the custom rom for the Odyssey, its definitely got some odd bugs.
Verizon stores can reflash it for you too for free, just need to hit up a Verizon CORPORATE store. Apparently they have the tools and the ROM, instead of waiting for it to be mailed and come back.
Well I used the wolf custom rom and follow the exactly instructions but my phone now say is corrupted, and instead of boat show me a message telling me that!
So, I got another one and now has the same problem, so, somebady knows if there is at day an original rom available?
Still no public Odyssey ROM yet.