Related
Hi,
I managed to brick my Milestone, terminally I'm afraid, but the symptoms are different than what I see around the forum so they might interest someone else.
So, I first backed up everything with GOT Nandroid and Titanium Backup then modded CyanogenMod 7 RC4 0.08-11.04.05 (Android 2.3.3) successfully, except that the SIM was locked and would not unlock, although it works in another phone. This was a bug supposedly fixed in version 6 of Cyanogen...
Browsing the forums, the only thing that made a bit of sense was that maybe the GSM frequency was set to the wrong value. There is a Nandroid mod (but not GOT) that allows you to change that so I entered GOT Nandroid again. Since it had no such option, I Rebooted. Then, the fun begun.
The phone got stuck on the Motorola logo and no button, not even Power, worked anymore. After waiting for many minutes with no progress, I took out the battery - that made a change , the phone shut down. I then put it back - the phone immediatelly, no, instantly, cause there's no delay as when you were powering it up, lights up with the same Motorola logo. Tried several times, always the same behavior.
I left it booting (but also connected to the charger) for a whole night, no change.
The phone is not seen by the PC when connected to USB. It won't reboot, normally or to recovery. Buttons won't work at all. Yeah, tried with or without the SIM and the sdcard, no change. Tried to start without battery, just the charger, doesn't work.
Useless to say, I am getting bored of that Motorola logo
I suspect that the bootloader in the internal memory got corrupted. Can this be flashed even if the device is not seen by the PC (I mean by the RDSLite installed on it)?
Cheers
When the charger is connected to the phone try at the same timeull out and pull in the battery while holding the buttons who will get you in the OR
Yup, it worked. So first I got the battery with a question mark. Then I put in the battery and I got a battery at 60%. Since I was holding Power+Camera, it continued to the Recovery mode and now I have a working Milestone with Cyanogen mod!!
Thank you a lot, Mikicishte.
I still have to see about the initial locked SIM problem... but that will be mostly fun.
florinadrian said:
I still have to see about the initial locked SIM problem... but that will be mostly fun.
Click to expand...
Click to collapse
Have you tried to factory reset the Milestone, to see if after that the SIM is accessible again ?
http://forum.cyanogenmod.com/topic/14099-sim-card-not-detected-after-factory-reset/
You could try also to install a logger application catlog for example (https://market.android.com/details?id=com.nolanlawson.logcat&feature=search_result ) to see in the logs if you can find out more details to help you with the investigations...
I did the factory reset as part of installing the mod.
Even if the post quoted reports the wipe as the source of the problem and not as a solution, I just wiped again with no good result.
Will try catlog.
florinadrian said:
I did the factory reset as part of installing the mod.
Even if the post quoted reports the wipe as the source of the problem and not as a solution, I just wiped again with no good result.
Will try catlog.
Click to expand...
Click to collapse
or maybe you could try to use an unlock tool to see what error is reporting
https://market.android.com/details?id=com.droidgram.bladeunlock&feature=search_result
I recently bought this Nexus off eBay and it worked fine.
Owner said it had problems with the SD card, but it seemed to be working, for they said it wouldnt read, when it does.
Anyway, it had cyanogen mod 6.1.1 on it, and I hate the setup...so i changed roms. That was a success, but when i flashed a sense rom thru clockwork(most updated) it said:
E:Error in /sdcard/N1Sensation_v0.4.zip
(Status 0)
Installation aborted.
Now, when i flash any roms, whether it says it installed correctly, it doesnt change anything. Now it's stuck at the 4 color x with the unlock icon. Any advice is good advice!
In my hboot, it says:
*** UNLOCKED ***
NEXUSONE PVT SHIP S-ON
HBOOT-0.35.0017
MICROP-0b15
TOUCH PANAL-SYNT0103
RADIO-5.00.00.04
Oct 12 2010, 14:33:16
HBOOT
Etc. Etc. Etc.
Thanks for any help!
Edit: I fixed the issue with why it failed, was my fault, didnt partition the card...but i was flashing a stock rom and it said complete and when i rebooted it stayed at the X and then powered off. Since then has never turned on. I don't know what to do. Nothing will turn it back on. I have a universal charger that charges the battery and it said the battery is full. I need help!
Ok lets see here try this plug in the charger then pull the battery place it back in wait a few seconds and repeat until you see the splash screen (the static X). This could get the phone to at least boot.
But just to check did you flash a radio in all that stuff??
Dude Random21 said:
Ok lets see here try this plug in the charger then pull the battery place it back in wait a few seconds and repeat until you see the splash screen (the static X). This could get the phone to at least boot.
But just to check did you flash a radio in all that stuff??
Click to expand...
Click to collapse
That did not work. I work at a cellphone repair store, but im yet to open it up. But i flashed a sensation rom...
http://forum.xda-developers.com/showthread.php?t=1083035
After then i got stuck on the X
Then i used... well i cant find the link, but it's PureGoogleMod.
From what I saw, there was no radio or kernal being flashed. I just know i flashed a rom, it said completed, then went to the X, rebooted, but never turned on. And ive tried other batteries.
matistight said:
That did not work. I work at a cellphone repair store, but im yet to open it up. But i flashed a sensation rom...
http://forum.xda-developers.com/showthread.php?t=1083035
After then i got stuck on the X
Then i used... well i cant find the link, but it's PureGoogleMod.
From what I saw, there was no radio or kernal being flashed. I just know i flashed a rom, it said completed, then went to the X, rebooted, but never turned on. And ive tried other batteries.
Click to expand...
Click to collapse
Try flashing CM7. Also...before you do...you may want to search for a format.zip from a member named temasek. It'll wipe your phone...clean. Real clean. Then flash CM7. try that.
also....those sense roms sometimes take at least 5 minutes to boot. Sometimes it'll stay on the X screen for 5 minutes or it'll stay on the bootanimation screen for 5 minutes. FYI.
SiNJiN76 said:
Try flashing CM7.
those sense roms sometimes take at least 5 minutes to boot. Sometimes it'll stay on the X screen for 5 minutes or it'll stay on the bootanimation screen for 5 minutes. FYI.
Click to expand...
Click to collapse
I can't flash anything. Phone wont react to anything anymore. Hoping one of my family members can fix it. But if I get it on I will try that.
I am pretty sure i waited long enough, but who knows. I didn't partition my card, which may have been the problem. And also it was S-On....which i thought was odd when it had a custom firmware.
Unlock bootloader. Flash recovery. Boot into recovery. Wipe everything. Flash rom.
Why do you guys keep suggesting software stuff when it's probably a hardware problem he can't get the phone to boot up so he can't do any of that.
Although there is one thing I want you to try before your family take a crack at it to take it apart and what not, it's a long shot but it's your last chance if it's software. Hold down trackball and press power keep holding trackball for another 5-10 seconds (better to long then to short) then connect it to the computer via USB you could see a popup notification saying that it's looking for driver software if you do then it's software and we need to reflash everything and might need to unlock the bootloader. Now if you don't see a popup notification I would still go check in the device manager and check for an unidentified device probably in other (it should be extracted so that you can see it).
If this doesn't work then sorry but I think it's a brick
Because in order to find out if its truly a hardware problem you need to try every software fix first.
Op mentioned nothing of trying fastboot as well. Software fix is free hw is not. That is why we suggest software fixes.
Sent from my Nexus S using XDA App
Let me remind you guys, THE PHONE WONT TURN ON AT ALL REGARDLESS OF WHAT I DO. I can post a YouTube video to show everything. It'd be very random for it to be hardware because it just turned off and will not turn back on. If there is any software like an RUU out there, that would help, if not, ill have to buy a bottom piece and warranty it out. But I'd feel bad because that isn't the right thing to do.
I don't expect you guys to fix it and I and very thankful of your help! But the phone won't turn on at all. So telling me to flash roms doesn't work. Imagine it as flashing a rom with the battery out of your phone. I am wondering if there's an adb way or something to get it to turn on and restore to stock?
With all that said, any help is amazing help and I am very grateful that this isn't a post I have to bump! Thank you so much, when I go on the PC, ill thank the helpful posts
Sent from my (finally) permanent root Sensation 4G
Then it is a brick if it won't turn on at all. The entire getting stuck at the x thing confused me to think it was powering on.
You have me confused sir, I'm not quite sure what good it is your looking for a RUU for. If the phone truly won't turn on/go past the X screen and you have it on a charger with no LED notification, then the phone is bricked. When you said you flashed a Sensation rom, I truly hope you just meant a Sense rom. If you can still get to the bootloader screen then you are not bricked and should retry everything from scratch.
Thread Closed
xsnipuhx said:
When you said you flashed a Sensation rom, I truly hope you just meant a Sense rom.
Click to expand...
Click to collapse
Sensation based, but it was a Sense rom
Confirmed it is bricked.
Sold on eBay for $100
Bought for $77
Semi-Winning.
Thread Closed
I'm a complete noob in dire need of help. I wanted to root my phone, and read the 3 procedures mentioned in the sticky thread. The 2nd one (nvflash) seemed very well explained and was sure to work with 2.3.4 so I decided to use that. As I was in my friend's house I used his pc and installed the drivers while my phone was connected in apx mode. Then I double clicked the "install internal xp" batch file which resulted in a black window with some texts, but seeing this my friend freaked out and closed the window before the process was finished. I told him he shouldn't have done that. I then disconnected the phone and switched it on. It seemed to switch on properly. So I then switched it off again and pressed and held the power and vol down switches to see if I got cwm. This showed LG screen for a few seconds and then the screen went off.
Now whatever I try to do I can only see the LG screen for a few seconds and then the screens goes off. No power on, no recovery, no nothing. And I can only attempt to even power on once, after the screen goes off I must remove the battery before the power button does anything again.
I tried to freshly nvflashing the recovery many times, but it made no difference. Does this mean my phone is bricked? Please tell me how I can solve this as I'm really worried.
NVFlashing the recovery again *should* have worked. So we first need to make sure you're trying to start CWM the correct way.
1) Unplug phone
2) Remove battery for 10 seconds.
3) Insert battery
4) Hold volume-down, do not let go, keep pressing it.
5) Press power button, keep it pressed.
If/when you get the second LG-logo, bluish halo, you can release both buttons, not before.
Nope, that was exactly what I was doing to access the recovery. I tried it again just now and it didn't work.
It just displayed the regular LG logo and then the screen went off. I'm not sure the phone completely shuts down 'cause if I keep it like that it gets quite hot and I can't use the power button again to try to power up. Only removing and re-inserting the battery gives me another attempt.
Is there any chance this is a hardware issue?
Hardly any chance this is hardware related if it was working before the first NVFlash.
Good, next step will be to NVFlash a complete stock ROM. You will unfortunately lose any data you might have on it, but that's the price to pay.
Go here, follow the instructions precisely, skip installation of apx-driver. Report back.
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
sean8000 said:
Ok, so I just download the 200mb file, connect in apx mode and double click flash.bat, right? And will this rom work regardless of country/region? I'm from India and was running stock 2.3.4 with v20* (can't remember the letter. God, I hate myself).
Click to expand...
Click to collapse
It works, yes, but is the original Froyo. This is just a way to get the phone up and running again.
Later you have a few choices. Either install CWM, then install you ROM of choice, or upgrade it to the latest for your region by using the LG Update tool.
EDIT. Oh, and btw, it is better to open a command-window and type the flash.bat command. If there are any errors you will still have them on-screen.
Thank you for all the help and support. I didn't get a chance to flash the rom till now (being on a vacation without a smartphone sucks). But I'll try it asap and report back.
So, how did it go?
TrymHansen said:
So, how did it go?
Click to expand...
Click to collapse
I haven't flashed it yet. I've decided to do it after I return home. I'm at my friend's house for 2 more days.
Ok, bad news. I flashed the stock rom you linked. The process went pretty smoothly. After the window got closed and the lg logo on the phone was visible 2 times, I unplugged it and installed the battery. But switching it on wasn't fruitful. It just displayed the LG logo for a couple of seconds and then the screen went off (just like before, only faster). I tried repeating the whole process, even tried to nvflash cwm once again, but nothing happened.
So is it a hardware issue? My phone is no longer in warranty period, so a hardware problem would be really bad...
So is it a hardware issue?
Click to expand...
Click to collapse
I don't know.
What would be helpful is to get a copy of the output you get when you NVFlash, it's simply the only way to verify that the flash process went ok. If you have an aborted flash it of course won't work, and may display the behaviour you describe.
EDIT: Btw, early on there were some ROMs which refused to boot properly unless the baseband was of an early variety as well.
If you feel confident the NVFlash has been successfull, smartflash an old baseband as well, see if it boots then.
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
gabriel2anjos said:
Its hardly a hardware problem. As you dont have the warranty anymore, and the bootloader is probably corrupted, i would recommend a Jtag service.
Please, dont be afraid of hitting thanks
Click to expand...
Click to collapse
Now what's this "Jtag service"? (edit- I googled it and it seems to be a method of un-bricking stuff with specialized hardware or something, but I'm not sure I can have that done where I live)
Is there any way to fix the bootloader by myself?
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
sean8000 said:
@Trym- So, I should download a v10 baseband and flash it with this "smartflash" tool, right?
Click to expand...
Click to collapse
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
TrymHansen said:
Yeah, as a last-ditch effort. I haven't the slightest hope it'll help, but it can't hurt to try.
Click to expand...
Click to collapse
Ok, I'll try that when I have the time.
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
sean8000 said:
So do you know anything about this corrupted bootloader thing? Does this mean my phone's hard bricked?
Click to expand...
Click to collapse
If it is you're only the second person in this forum to ever brick his phone. Anything's possible I guess. Some flash cells may have been damaged the first time the power was yanked. But then we should presumably get some verification errors during flashing.
Anyway, I'm at my wits end, and I really do hope you get it up and running, but I don't have anything more to contribute. Good luck.
Corrupted bootloader means that your cellphone simply don't know what to do when you hit the power button, due to the damage. As the cell phone can't turn, the pc can't recognize it. If your cell phone were a samsung, you could try to use a jig to have acesso to the download mode. But I don't know if it would work for a LG. You could try anyway.
And if you live at big city, usually it's common to have some jtag services.
Please, dont be afraid of hitting thanks
Please, dont be afraid of hitting thanks
Ok, so I took the phone to the service center today. The guys there said its battery terminals are messed up. They said replacement terminals are not easily available, but they'll try to find some. And of course I'll have to pay for it. I guess it's still better than using the phone as a paperweight.
What do you guys think?
Good luck I managed to mess up my phone like you too. I'm from India. But the difference was that I was covered by warranty. I managed to get a bunch of hardware replaced and was up and running again.
I am running Infected's CM12.1 ROM on my Yuga, and it's been working great, but just yesterday, my phone restarted without warning and optimised all the apps (200 of them), right when it says "starting apps", it restarts again and did this until the battery drained out.
I cannot enter recovery at all. I have TWRP installed on the FOTA partition, but I cannot access that. When I'm holding the volume down key on the reboot, it just skips straight to the CM logo.
While it's optimising apps, I can see the phone in adb, but it's unauthorised, so I cannot run any commands to it.
I can reboot the phone into fastboot, but apart from reflashing the boot.img (which I already did) I don't know what else to try.
I think all the buttons are working, but I saw that the water pads are red underneath two of them. I think there may be water damage, but am not sure.
I'm out of ideas and would very much appreciated if anyone can help me bring my beloved phone back.
Lohot said:
I am running Infected's CM12.1 ROM on my Yuga, and it's been working great, but just yesterday, my phone restarted without warning and optimised all the apps (200 of them), right when it says "starting apps", it restarts again and did this until the battery drained out.
I cannot enter recovery at all. I have TWRP installed on the FOTA partition, but I cannot access that. When I'm holding the volume down key on the reboot, it just skips straight to the CM logo.
While it's optimising apps, I can see the phone in adb, but it's unauthorised, so I cannot run any commands to it.
I can reboot the phone into fastboot, but apart from reflashing the boot.img (which I already did) I don't know what else to try.
I think all the buttons are working, but I saw that the water pads are red underneath two of them. I think there may be water damage, but am not sure.
I'm out of ideas and would very much appreciated if anyone can help me bring my beloved phone back.
Click to expand...
Click to collapse
Have you tried flashing stock FTF ?
You would need FTF from general section and also flashtool which you can get from here. Make sure the FTF is device specific or your would end up bricking up your phone
http://www.flashtool.net/index.php
You can search xda for how to use it. If you still have questions, quote me and I would be glad to help
Hi,
Thanks for helping me out. I tried reflashing a few different ROMs using flashtool, including stock, but nothing helped.
In the end, I bit the bullet and gave it up for dead. The good news was, since the cause seemed to be water ingress, it was covered by my insurance, and so I was given a replacement!
Thanks again for your help.
Hnk1 said:
Have you tried flashing stock FTF ?
You would need FTF from general section and also flashtool which you can get from here. Make sure the FTF is device specific or your would end up bricking up your phone
Click to expand...
Click to collapse
Lohot said:
Hi,
Thanks for helping me out. I tried reflashing a few different ROMs using flashtool, including stock, but nothing helped.
In the end, I bit the bullet and gave it up for dead. The good news was, since the cause seemed to be water ingress, it was covered by my insurance, and so I was given a replacement!
Thanks again for your help.
Click to expand...
Click to collapse
There's nothing sweeter than using a phone for a long time and getting a brand new !
Enjoy mate. No trouble. Just quote me again in case you have any query for me.
I have had my Sm-N910T for about a year now. When I first got it I rooted it without thinking it through. I used Odin and flashed cf autoroot. I unrooted it when it started giving me issues. Then it would restart, freeze, etc. I now have an app called wakelock and it prevents my phone from turning off. It works great it has the original firmware that installed through Samsung kies but when I try to restart it just shuts down. When I power off I can't always power back on right away. I have to pull the battery and hold the power button for 1 minutes release, then put the battery back in and it works again. I have put the original firmware and it is not rooted anymore. Is there any way I can fix this issue? So basically it works fine but if I turn it off I have to pull the battery to be able to turn it back on. Every once and awhile it'll go into download mode on its own too.
Enalay527 said:
I have had my Sm-N910T for about a year now. When I first got it I rooted it without thinking it through. I used Odin and flashed cf autoroot. I unrooted it when it started giving me issues. Then it would restart, freeze, etc. I now have an app called wakelock and it prevents my phone from turning off. It works great it has the original firmware that installed through Samsung kies but when I try to restart it just shuts down. When I power off I can't always power back on right away. I have to pull the battery and hold the power button for 1 minutes release, then put the battery back in and it works again. I have put the original firmware and it is not rooted anymore. Is there any way I can fix this issue? So basically it works fine but if I turn it off I have to pull the battery to be able to turn it back on. Every once and awhile it'll go into download mode on its own too.
Click to expand...
Click to collapse
Hi,
I have reported this thread to be moved to the right Q & A section where you might be able to get help quickly.
-Vatsal
Enalay527 said:
I have had my Sm-N910T for about a year now. When I first got it I rooted it without thinking it through. I used Odin and flashed cf autoroot. I unrooted it when it started giving me issues. Then it would restart, freeze, etc. I now have an app called wakelock and it prevents my phone from turning off. It works great it has the original firmware that installed through Samsung kies but when I try to restart it just shuts down. When I power off I can't always power back on right away. I have to pull the battery and hold the power button for 1 minutes release, then put the battery back in and it works again. I have put the original firmware and it is not rooted anymore. Is there any way I can fix this issue? So basically it works fine but if I turn it off I have to pull the battery to be able to turn it back on. Every once and awhile it'll go into download mode on its own too.
Click to expand...
Click to collapse
sounds like the same software issue I had. Idk what happened but the internal memory failed on my note 4. Have you experienced constant freeze ups? also have you gone into download mode with an error that says "mmc_failed can't boot"? It was something along the lines of that.
Re:
alfadog77 said:
sounds like the same software issue I had. Idk what happened but the internal memory failed on my note 4. Have you experienced constant freeze ups? also have you gone into download mode with an error that says "mmc_failed can't boot"? It was something along the lines of that.
Click to expand...
Click to collapse
Yes I have those same issues. I am getting a new phone but I have to give this one to someone else and I need it in good shape to give it to them. Do I need to just buy a replacement or is there any way I can get it fixed?
Enalay527 said:
Yes I have those same issues. I am getting a new phone but I have to give this one to someone else and I need it in good shape to give it to them. Do I need to just buy a replacement or is there any way I can get it fixed?
Click to expand...
Click to collapse
Have you tried to update to the latest firmware? DOK2 fixes a lot of issues including the memory leak.
Sent from my SM-N910T using Tapatalk
aaldiar said:
Have you tried to update to the latest firmware? DOK2 fixes a lot of issues including the memory leak.
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
I updated it ota then on Samsung kies with the latest firmware. Everything works fine except the power off issues.
I think this is a common 5.0.1 issue, same thing started happening to me after update. Gotta wait for update or back to 4.4.4.
Enalay527 said:
I have had my Sm-N910T for about a year now. When I first got it I rooted it without thinking it through. I used Odin and flashed cf autoroot. I unrooted it when it started giving me issues. Then it would restart, freeze, etc. I now have an app called wakelock and it prevents my phone from turning off. It works great it has the original firmware that installed through Samsung kies but when I try to restart it just shuts down. When I power off I can't always power back on right away. I have to pull the battery and hold the power button for 1 minutes release, then put the battery back in and it works again. I have put the original firmware and it is not rooted anymore. Is there any way I can fix this issue? So basically it works fine but if I turn it off I have to pull the battery to be able to turn it back on. Every once and awhile it'll go into download mode on its own too.
Click to expand...
Click to collapse
I would recommend downloading the full DOK2 firmware. You can find it in the below linked thread. Make sure you use the newest version of ODIN to flash it 3.10.7.
It should give the phone aq complete clean install of the firmware. Kies sometimes can be janky. It you are going to get rid of the phone the best is to do a full ODIN flash.
http://forum.xda-developers.com/note-4-tmobile/development/mirror-stock-tw-t3260858
I been having the same issues ...even with full firmware flashed DOK2....I get internal memory failure. Hope someone finds a fix. Have to pull out battery, sim cards, and spen, then press all the buttons, thennnnn....put everything back to boot up. Power button won't work, and reboot won't reboot. It Just turns off. Sucks...I love this phone. Right now it's acting ok...occasionally I get freezes and major lag. Someone please help!
notufatjesus said:
I been having the same issues ...even with full firmware flashed DOK2....I get internal memory failure. Hope someone finds a fix. Have to pull out battery, sim cards, and spen, then press all the buttons, thennnnn....put everything back to boot up. Power button won't work, and reboot won't reboot. It Just turns off. Sucks...I love this phone. Right now it's acting ok...occasionally I get freezes and major lag. Someone please help!
Click to expand...
Click to collapse
I had this problem too except it got really really laggy and would constantly reboot anytime I tried to do anything. Best I could figure out was it was a problem with the internal sd. Called TMO tech support, told them I did factory reset, tried it without the sd card, blah blah blah. I said it's a hardware issue that is beyond my control and I don't feel like I should have to pay for it. They said well it sounds like you already did the work for us. I guess it was still under warranty but I got a new phone the next day and no problems since. Hopefully whatever was wrong they have fixed the issue by now but so far so good.
Definitely mention the mmc read fail error or whatever it says. All it cost me was a $5 charge. Give em a call.
I have the same problem, and it only happen when I update the phone to newest firwame, DOK2.
When I use COG1 firwame it very fast and easy use. but when I update DOK2 over Odin, I few very lag and usually restart the phone when I run a big application, then It can't restart after, just turn off.
And after that, can't turn on the phone. I had remove pin in 10s, pull in and it power on normal.
Sometime I turn on the power and the phone go into download mode with notice "mmc_fail can't boot".
Now I just only want to download my phone to old firwame, COG2 and use it normal, but the new firwame with new bootloader don't allow to download old bootloader. So sad
anyone can't show me how to download to COG2 firwame, Please....
tony yayo said:
I had this problem too except it got really really laggy and would constantly reboot anytime I tried to do anything. Best I could figure out was it was a problem with the internal sd. Called TMO tech support, told them I did factory reset, tried it without the sd card, blah blah blah. I said it's a hardware issue that is beyond my control and I don't feel like I should have to pay for it. They said well it sounds like you already did the work for us. I guess it was still under warranty but I got a new phone the next day and no problems since. Hopefully whatever was wrong they have fixed the issue by now but so far so good.
Definitely mention the mmc read fail error or whatever it says. All it cost me was a $5 charge. Give em a call.
Click to expand...
Click to collapse
Hello there, I'm having the same exact issue lately, phone is a Year old, and I think its failing, One question though!
Was your phone ever rooted? mine is, but I flashed the Stock DOK2, so its official with NO root now, but I think the Device status is CUSTOM not official, Also KNOX has tripped while rooting, would T Mobile honor a replacement? At least its on the Official OS with NO Root now.
Please enlighten me
Willy318is said:
Hello there, I'm having the same exact issue lately, phone is a Year old, and I think its failing, One question though!
Was your phone ever rooted? mine is, but I flashed the Stock DOK2, so its official with NO root now, but I think the Device status is CUSTOM not official, Also KNOX has tripped while rooting, would T Mobile honor a replacement? At least its on the Official OS with NO Root now.
Please enlighten me
Click to expand...
Click to collapse
Not really sure. Mine was never rooted. I've heard of plenty of people sending their rooted phones in with no problem.
thiennvbk said:
I have the same problem, and it only happen when I update the phone to newest firwame, DOK2.
When I use COG1 firwame it very fast and easy use. but when I update DOK2 over Odin, I few very lag and usually restart the phone when I run a big application, then It can't restart after, just turn off.
And after that, can't turn on the phone. I had remove pin in 10s, pull in and it power on normal.
Sometime I turn on the power and the phone go into download mode with notice "mmc_fail can't boot".
Now I just only want to download my phone to old firwame, COG2 and use it normal, but the new firwame with new bootloader don't allow to download old bootloader. So sad
anyone can't show me how to download to COG2 firwame, Please....
Click to expand...
Click to collapse
Make sure you are using the ODIN version 3.10.7 if you are using an older version of may be what caused the issue.
If you did use the newest Odin, then I would factory reset your device, but into twrp and wipe everything but external SD Card, boot back into download mode and flash the firmware again. Most likely a few files for messed up during your Odin flash and it messed up the process. Also make sure you are using the USB cord that came with the device.
I found the fix for this mmc_failed. Making a new thread for this.
---------- Post added at 06:11 AM ---------- Previous post was at 05:38 AM ----------
http://forum.xda-developers.com/showthread.php?t=3277144
Here's is the fix. Don't forget to hit Thanks button