hi i have an m2000 and i am trying to update the rom to imate 1.40
when it gets to stage 2 of the upgrade it stop responding at 81%
so i have to unplug and try again and the same thing happens.
also if i try to reload back to orange rom it stop every time at stage 2 18%
have i killed my m2000
You should always be able to flash your device with the original rom as is (dont extract the files run the exe).
If you are having a problem the it could be your pc. We have threads were the only solution was to use a different pc (some sort of chip issue).
Insure that you are not using a usb hub, start again with the original rom, move on from there. (and read wiki)
help m2000
thanks for your help i used me son pc and managed to load new rom 1.40
thanks
Related
I've currently followed the instructions for the 1.31 with Arabic and different radio file because that's exactly same original hardware as my UK O2 XDA IIs.
But I've ran the BaUpgradeUt.exe and it confirmed the version changes, but now it doesn't seem to be doing much.
Phone has gone dark and simply says:
USB
v2.06
And the Upgrade program says: Checking the information on the device please wait.
And a warning not to disconnect it.
Erm this is my first flashing so just a little worried I've toasted my new device :-( I can appreciate it takes a while to transfer 30Mb odd over USB, but it hasn't done anything for almost 10 minutes now :-(
Help please? :-(
Thanks!
And I think I've solved my own problem. Everything you need really is in this forum... somewhere
For everyone else who stumbles over this looking for same thing. I simply took battery out for 30 mins (to flatten backup I assume) and then hard reset it (comes up with serial v2.06 at point you unplug from cradle) and then restarted PC and re-ran update program and SEEMS to be going okay at the moment!
Hi,
I have the O2 XDA IIs just like you too but still with the original ROM. You can get a copy of the original ROM from O2 now off their myxda uk site if there are any problems.
Have you got a step by step guide of how you upgraded to 1.31?
Cheers
Hi,
Take a look at the Wiki site. It has all the info on there. I'm now running a 1.31 main ROM (was originally 1.12), a 1.06.02 radio (originally 1.02 I think) and an extended ROM that is hacked up from Orange's (the network I'm actually on!) as well as my own choice of programs etc. Wiki has all the info! It rocks! Thanks to the guys (and gals?) who write it!
Hi
I tried upgrading to the rom below
Custom_RUU_Wizard_1050402_101_11210_O2_ENG_CID.exe
but it made my imate totally sluggish and really slow, especially when opening mesages etc. I decided I wanted to revert back to the original imate ROM but when I was installing it it failed before even getting to 1%
It stayed at the point where my k-jam was red blue green etc
Anyone suggest why this might be the case?
Also can someone explain what the CID unlocker is used for? Does it allow you to 'downgrade' ROMs?
Thanks for your help guys. I'm still quite new to this
Scaseman
CID unlockeris is needed to be able load roms that are not made for your phone... like MDA Vario without CID unlocker cant take rom that was made for Qtec and other way...
try RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
its the best rom for me... make sure you run CID unlocker first and after WM5 loaded hit reset on your phone so it wont load cabs from extended rom (if you dont want them)
how to reinstall ROM of XDA ll mini
i tried to upgrade my XDA ll mini ROM with 'XDA ll upgrade file' given at 'o2-online.de' instead of giving me error report at the beginning of upgrade it started erasing my ROM and then gave me an error.now my rom is erased and it cant be turned on.however when i connect it to the pc through USB cable ,on the srceen "USB v1.02" is being displayed.how to reinstall the software and where can i get the download file.please help i used my phone 1 month back.
i have Qtek 2020i i try to upgrad the phone
now the phone desplay (serial )
when i but the usb cable the phone desplay (usb)
the phone not boot now
what shoud i do to flash the phone
what is the matter ????????????
Flash again
Sounds like you have a similar issue to
http://forum.xda-developers.com/viewtopic.php?t=43400
You tried running the upgrade again, maybe with an earlier or the original ROM. Make sure you leave the device in the cradle until the end when it says to take it out and hard reset.
If your needing a ROM, look in the Alpine Upgrade forum, Pug has a post there with four version of the 162 ROM, I'm using the 3rd without issue.
Qhen I put the latest version of the radio on my Blueangel i see the error messege. I see how I can pot new version of Radion on the blue angel here.
http://wiki.xda-developers.com/index.php?pagename=BA_Radio_1.15_Upgrade
i make step by step everything but show me error messege then I make 7th point from this link again show error messege in the program.My pocket PC now is don't show anything. When put the phone on the stand now show only USB and V2.08 under them. nothing light and nothing power on. I try to make hard reset on the phone (press restart buton and power on buton) but do nothing on the screen. I outside the battery and sim card about 10 minutes , then put again into the phone now the phone doing nothing when i try to turn on. I don't know whats happened can anybody help me?? Is my phone dead ?? ;(
now i try to make other way to put another radio but nothing work ... i am dissapointed pls help ...
ok, i understand your situation and i think your phone is not dead, but to find out and to find a way to a solution, you have to give a little more information about what happened:
-what error did you get?
-at what point exactly?
- what os are you using on your pc?
- what rom are you using on the blueangel?
- are you sure, it is a blueangel and not a harrier?
- was your battery fully charged at the point of the first upgrade attempt?
- was the sim card in the device?
- was the sd card in the device?
many people get stuck in bootloader (ok, most of them with a rom upgrade, not the radio, but anyways). until now, we got them all out of that problem and got their devices running again, but it is hard to guess from here, what went wrong, when you only describe your emotional status and not the device's
with best regards,
Chef_Tony
thanks now everythink is write ..
now if you can help me i want to put into my qtek 9090 phone new radio version and another rom with manila because it's easyly to using for me.Now can you help me to install new radio version now is 1.12 I install 6.5 rom but now i want change it with radio and new rom with manila.Now i don't have any error in the phone after flashing rom now it's ok.
I use in my PC windows 7
now in blue angel (qtek 9090) is 6.5 but don't know which version or distribution
I dont have sim card or sd card in phone wehn installing
battery is goot charged more than 90%
sorry for my don't good english if you can i want help me pls and I can't find accurate links in this forum. it's very good forum but I am not professional in flashing rom but I want make it.
for flashing with windows 7 you need to install a special driver first, you find a tutorial and the download of the driver -=here=-.
it never worked for me though (windows 7 ultimate x64) because the x64 is somehow strange. i hope this was helpful, because i didn't really understand your question
tony i need your help
Hello,
I have bought the VPA Compact from a friend in Germany, but I would like to use some italian ROMs, because on the device there was a bepi German ROM with WM5.
So I decided to change ROM; I found the HardSPL, but I didn't care about the fact that the Olipro HardSPL was not installed yet.
Then I putted on the device two italian ROMs, and all seemed ok, because I have installed Claros 3.51 ROM and another one with WM6.1, with also a new RADIO 1.46.11 (or 1.46.10).
Three days ago I saw on Internet about the possibility to put into my device a WM 6.1 Elegance ROM by eLIas, so, ignoring that I need to have Olipro HardSPL, I started to put the WM 6.1 Elegance, but the flashing has not finished well.
In that time, I didn't lost my courage, and I started to use MTTY and I found that there were some blocks corrupted.
Then I tried to flash ROM by miniSD card: neither in this way I reached the goal to put a working ROM on my device; because I tried to put old WM5 italian, Claros 3.51 ROM, some HardSPL (1.04 and 1.1).
So, I ask you if there's some possibility to recover the device and put some ROM, or I need to throw it into the basket?
Hope that someone will answer me.
I wanna say two more things:
everytime I try to flash by WinXP, there is an error (260) from the application utility.
When I try to put a new ROM, the device is turning off after only 1% of progress, and when I try to put an HardSPL, the progress reach 100% and the device is turning off, but I don't see any new change...
Thanks in advance for reading and replying