Hi,
I just would like to know if it's possible (or if it's a stupid question) to put a rom of a Qtek 9090 on a Qtek 2020.
Why this question ? Because the Qtek 9090 have the same processor and (I suppose ) mainly the same hardware than the Qtek 2020.
Benefits of the manipulation : WM2003 SE, BT Widcomm stack, ...............
Did someone have this rom ?
If no, I have one
and you're still waiting to publish it !!
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
To freddyzaz
To freddyzaz
Tofreddyzaz
freddyzaz, if you really have this ROM from Qtek 9090 - please post it, so we can see what can be done with it.
Can you upload the ROM of qtek 9090??
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Hi,
I've posted the Qtek 9090 rom. Enjoy it, and please post your results here
Re: Can you upload the ROM of qtek 9090??
van said:
@ freddyzaz
Please, can you upload the ROM of Qtek 9090 in this forum?
I would like to try it anyway with my MDA II
Thanks,
Click to expand...
Click to collapse
Hi Van,
I will try it for you and will add comment to XDA-Forum,
For O2 XDA-II -> everything is possible .... like mission imposible ... and make it avaible.
Mentioned ideas the same with mine, ... we will use O2 XDA-II or XDA-II(i) or XDA-II(s) or XDA-III ??? where the core hardware inside is not much impressive.
Chim sao / VHS
mamaich said:
As far as I've seen QTEK9090 has a PXA27x CPU and 2020 is PXA263. Theoretcally it is possible to patch 9090 ROM so that it would not hang on our devices.
Click to expand...
Click to collapse
Wrong my Qtek 9090 has a PXA263 400Mhz...
from the registry I noticed a difference in the bluetooth device:
qtek2020:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\ASIC5_BTUR]
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="ASIC5_BTUR.Dll"
"FriendlyName"="BT on COM6:"
"Index"=dword:00000006
"IoBase"=dword:afe00700
"IoLen"=dword:00000024
"Irq"=dword:00000022
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
qtek9090:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BlueTooth]
"DevConfig"=hex:20,00,00,00,05,00,00,00,10,01,00,00,00,4b,00,00,00,00,08,00,\
00,00,00,00,00
"DeviceArrayIndex"=dword:00000000
"DeviceType"=dword:00000000
"Dll"="Serial_BTUR.dll"
"FriendlyName"="BT UART"
"Index"=dword:00000004
"IoBase"=dword:aa050000
"IoLen"=dword:00000024
"Irq"=dword:00000011
"Order"=dword:00000002
"Prefix"="COM"
"Tsp"="Unimodem.dll"
different iobase, different drivers.
I don't have a qtek9090, so can only look at the binary for differences.
It's normal because the 2020 has a MS drivers/stack whereas the qtek 2020 has a WidComm drivers/stack but the drivers file has the same name.
In the Qtek 9090 :
"Bluetooth for Windows CE BT-PPC/PE Version 1.0.0.1900"
I need the password for this ROM... :roll:
Try to flash ROM- Qtek 9090 for MDA II
I have been trying flash ROM- Qtek 9090 for MDA II but no success :evil:
1. Copy NK.NB1 to the SD card
2. Enter bootloader mode
3. Hook up a terminal on the serial line
4. Insert SD card
5. Type 'S2d'
Nothing
Any Ideas ???
I dont think just flashing the qtek 9090 rom will do the trick.
there's just to much difference between the devices.
but I'm looking forward to you guys getting this done. there are so many freaks around here
off topic
@JRC
Where did you get the Qtek 9090? And how much did you pay for it.
I would like to buy one, but here in Belgium or the Netherlands, they still not available
freddyzaz: Could you please download all 3 ROMs (OS ROM, Extended ROM and Radio ROM) and post it here?
itsme: Could you please create the .nbf files when freddyzaz will post the ROMs here?
Sorry, I can't. The 9090 was just for a test, and I've not the possibility to have it again.
Aarrrgghhh... That's bad, that's bad...
I think we need all these tree ROMs backups, 'cause I'm "sure" RadioROM is little bit changed (updated?)... And ExtROM we need for great new versions of included SW, of course...
But I hope, if we get these ROMs someday and try to flash them, it should work in Himalaya as Himalaya & Blue Angel are different only in keyboard and WiFi, the rest should be same (CPU, RAM etc...)
As far as I see 9090 uses a different BT chip: BRF6100, that is probably incompatible with ours. Display hardware is also different - when I've replaced ace_ddi.dll with this - my iMate hanged on startup. Camera is also incompatible - the 9090 application crashes at start.
i think it's not the right way by trying to get the whole thing working with the qtec 9090 images but to extract the wm2003 system.
so we get a completly "naked" system in which we can load our old software and drivers from the qtec 2020.
I guess that's the way to get started on this.
ROM Qtek 9090
Flashing error again
I think that we need WM 2003 SE and smart bluetooth profile supported PAN. Some months ago nick HTC already had test ROM with WM 2003 SE and it is working. Now Tmobile and mmO2 have tested ROM and we have to wait for launch MDA III fist in Nov. :wink: then the upgrade 2003 SE will be posted?
May be somebody can share the beta upgraded ROM WM 2003 SE here???
Thanks
Okay I had been running the leaked Qtek 9100 2.8 Rom with some great success. I just added a few of the T-Mobile comm manager and other misc applications. I recently got my MDA replaced by T-Mobile (cracked Touch Screen) and now I'm back at square one.
I was thinking maybe there was an official release of 2.8 or a newer version I can try. i don't mind living on the edge and backup regularly.
Any help is appriciated.
I am running the Imate release version (none of their customizations though - just a handful of the T-Mo ones) with good success.....
I just updated my US T-Mobile MDA to the new Qtek ROm and everything works great! Right now my guess is to try both the i-mate and Qtek ROMs out there. Good Luck!
- JOhn
If you're not going to load their respective customizations there is no codebase difference between the Imate and Qtek ROMs. Same code.
i just put the newest i-mate rom on it, then entered the T-Mobile settings for gprs/umts ( you can use program for it) its working fine...
New AKU ROM 3.3 in Croatia , from Serbia.
http://www.t-mobile.hr/mdasw/RUU_Cha...WWE_Ship.zip
http://www.t-mobile.hr/mdasw/RUU_Charmer_38221_382127_026921_TMO_HR_WWE_Ship.zip
Problem with batery fixed
My MDA Compact II was byed in Croatia. I was installed a few different AKU ROM (UK, CZ, DE, PDAMobiz, WM6) but I had problem with short duration batery, max 2 day. With new AKU ROM 3.3 WWE, evrything is fixed, batery is like new.
can i install it into my UK compact II?
work
jes,but with ,,HTC Charmer noid,, work assuredly.
Sorry if this sounds silly, but is this wm5 or wm6?
this is wm5
thank u, it work with my UK compact 2. its much better as the v2. cheers
Thank you
Thank you! It works with "HTC Charmer noid.zip" for my German T-Mobile MDA Compact II. To run software update I extracted all files from firmware update into one folder (without subfolders) and then copy there files from "HTC Charmer noid.zip"
I am looking for a row for the Dutch MDA Vario, i would like it if it's NOT from T-mobile themselves, just because of everything they do to the ROM like the colors and the shortcuts etc. i would love to have the latest HTC rom. Can anybody load it up for me?
Thnx,
Greets Kevin
Hello everybody,
I'm going to give my P3600 back to the support service to have it fixed (as usual the black paint is peeling out very quickly from the bottom and the side). My phone is unbranded and I can't find the original ROM I downloaded from the HTC web site.
Do you know where I can find the original italian ROM for HTC p3600?
Anybody have it?
And also I've done so many upgrades (tryed almost all the ROM in this Forum!)... is there anyway a specific guide for a safe downgrade?
Thanx everybody.
-----------------------------
P3600 - ROM Ervious WM6 ITA
Radio ROM - 1.46.30.11