[SX66] Cingular MediaNet - how to setup? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

So, when I upgraded to WM5 I lost MediaNet.
This would have been in Start >> Settings >> Connection Tab >> Conection Icon. Then one of the Drop Downs along with My Work Network and My ISP.
I have no clue how to setup - of cource.
Edit: I think this is it below but I can not connect....
Code:
Tap on Advance tab > Select Networks
Select the drop down to My ISP and click on Edit... > New…
Enter a name for these settings : My GPRS
Select a modem: Cellular Line (GPRS)
Tap on Next
Access point name: wap.cingular or isp.cingular depending upon the plan you are entitled to use. (if not sure of the plan, try wap.cingular)
Username: [email][email protected][/email] or [email][email protected][/email] (depending upon the plan you have as above)
Password: CINGULAR1 (password is case sensitive)
Tap on FINISH > OK > OK > OK >X

here is a link to them all..
if you need help PM me..
http://www.mobilegadgetnews.com/index.php?showtopic=6790

That's the ticket! Thank You VERY MUCH
Code:
WAP Settings for GPRS Profile
Create new GPRS connection.
Description: Cingular WAP
Connects to: The Internet
Access point: WAP.CINGULAR
User name: [email][email protected][/email]
Password: ZJULDAGEN98810

well I think you can use the data acceleration version too.. not sure if you need the pda plan or not though.. glad you got it working..

Accerleration? I messed that on that page... I'll give it a try.
Thanks for you help.

Code:
[U]Data Connect Settings for GPRS Profile[/U]
Create new GPRS connection.
Description: Cingular GPRS
Connects to: The Internet
Access point: ISP.CINGULAR
User name: [email][email protected][/email]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
User name: [email][email protected][/email]
Password: ZXY203DC9K0402
Yep, the above does work and it is much faster! Thanks for pointing that out!

Related

xda mins vodafone uk chip mms settings needed (cab file)

Hi can anyone help me ?..... I have a 02 xda mini s, but im using a vodafone UK contract chip, I need the mms settings. I belive there is a cab file out there someware, if so could you please tell me were i can download it, or could you please email me it.. thanks for your help in advance Dave......
This worked for me
I set up the MMS settings according to the following and then ran the cab below which made the folder visible in Messaging. Don't know if it would work the other way round or if the cab does anything without doing the settings but, like I say, it worked for me -- if it ain't broke...
Settings/Connections tab/Connections/Tasks tab/Work (or whatever you call the 2nd section):
Add a new modem connection...
Name: Vodafone Live!
modem type: Cellular Line (GPRS)
Access Point Name: wap.vodafone.co.uk
User name: wap
Password: wap
Domain: blank
No extra settings under Advanced
Finish
Proxy Settings tab: Both boxes ticked
Proxy server: blank
Advanced: choose WAP
Server: 212.183.137.12
Port: 9201
User name: wap
Password: wap
Domain: blank
OK
Messaging app/Menu/MMS Configuration/Servers tab/New:
Server name: Vodafone MMS
Gateway: 212.183.137.12
Port number: 9201
Server address: http://mms.vodafone.co.uk/servlets/mms
Connect via: Vodafone Live!
Sending size limit: 200K (your choice)
WAP version: WAP 1.2
OK
Then run cab to create additional folder under Messaging. Good luck! :wink:

US T-Mobile Data settings and 1st Edition of Molski's 3.0.0.0 AKU3.2 Rom

I am having problems setting up the US T-Mobile data settings. I have done search after search and come up with three .cab's that say they contain the settings:
1. T-Mobile_Network_Customizations - does not install
2. t-mobile_network_customizations_335 - does not install
3. T-MobileUStPPC - installs, but does not seem to make any changes after resetting
I even found a few threads that talk about using T-Zones for all of your connections to reduce your monthly bill.
The problem that I am having is that everything that is referenced in the phone settings does not match what I see.
When I goto:
Start / Settings / Connections ... Connections tab
I see:
My ISP
Add a new modem connection
My Work Network
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
What am I missing?
Thanks for the help / flames in advance.
go over to howardforums. they have a thread all about this. You'll findit by searching.
http://www.howardforums.com/forumdisplay.php?f=324
even though I'm bored to tears here at work, I'll let you find it. Teach a man to fish sort of thing...
I use this wap setting with proxy to see real web pages
Code:
T-Mobile web/t-zones proxy
modem: cellular line gprs
Access Point Name: wap.voicestream.com
user name:
password:
domain:*
proxy settings:
proxy server: getmorespeed.voicestream.com
advanced
http: getmorespeed.voicestream.com port: 8080
WAP: wap.voicestream.com port: 9201
Secure WAP proxy: wap.voicestream.com port: 9203
Code:
To get MMS working go to Start>Messaging
Select any account then select Menu>tools>Options>Account Setup
Edit the one called Media Messages the select Menu>Edit Connections
Delete any connections you have and create this one:
CODE
Description: T-Mobile MMS
MMSC address: [url]http://216.155.174.84/servlets/mms[/url]
Data connection: MMS Network
Gateway: WAP 1.0 Gateway
IP address: 216.155.165.50
Port: 9201
GPRS Settings
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
This is strange I never had to use the internet2 apn. I just use the wap.voicestream.com and it works fine. Is anyone that is using both noticing any type of difference in connection?
@Peraltah
You can use either APN.
I always leave everything blank and The Edge/GPRS works all the time.
how do i ovecloked
dwny said:
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
Click to expand...
Click to collapse
i too use mda.can someone tell me how to overclocked

Brasilian settings

I intent to go to Brazil and want to use my Diamond there with a local chip, my phone is simlockfree, but does it take the settings automatic? In the past I couldn't get conected with my P3600 neither with Clara or Tim.
Thanks in advanced
Willem
TIM
START
Settings
Connections
Connections
Advanced
[Select NetWorks]
My ISP
[Edit]
GPRS
[Edit]
Enter a name for the connection: GPRS
Select a Modem: Cellular Line (GPRS)
Access Point Name: tim.br
User Name: tim
Password: tim
[FINISH]
[Select NetWorks]
TIM MMS
[Edit]
TIM MMS
[Edit]
Enter a name for the connection: Tim.mms
Select a Modem: Cellular Line (GPRS)
Access Point Name: mms.tim.br
User Name: tim
Password: tim
[FINISH]
START
Messaging
Menu
New
MMS
Select (escolha qq um)
Menu
Options
MMS Options
Servers
New
Tim MMS
Server Name: Tim MMS
Gateway: 200.179.66.242
Port Number: 8080
Server Adress: HTTP://mms.tim.br/servlets/mms
Connectvis: TIM MMS
Send Limit: 300 kb
WAP Bersion: WAP 2.0

How to configure GPRS

How to configure GPRS. I'm using Itjes roms (v12, LEO) but i can't get my wap working. I can choose on connection wizards TELE2, but nothing happens. With other operators (Omnitel, Bite) wap works perfect.
So I decided make it by my self (manualy). But i don't know how. Maybe someone can help me?
There is GPRS settings:
profile name: TELE2 GPRS
start page: http://wap.tele2.lt
WAP GW IP: 130.244.196.090
authentification: normal
connection type: permanent
data bearer: GPRS
APN: wap.tele2.lt
port:8080
username: -
password: -
sorry for my english. And thank you.
Edit: Problem solved. I just needed to change internet.tele2.lt with wap.tele2.lt ... arhh..
Please delete or lock this thread.

Carrier Cab Request

I am having problems setting my internet settings on my Fuze... Everything worked in my Tilt... Could someone make a carrier cab for my carrier? Thank you in advance, and here are the settings that I have..
-----------------------------------------------------
Name for connection : EinsteinPCS Internet
access point name : apn (case sensitive)
Usename : (leave blank)
password: (leave blank)
domain : (leave blank)
...under advanced
User Servier assigned IP address
click ok..
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :192.168.254.251
click advanced
http: 192.168.254.251:8080
wap: 192.168.254.251:9201
secure wap: 192.168.254.251:9201
socks (blank)
-------------------------------------------------------------------
For MMS... go into MMS Options... goto servers.. set these settings :
Server Name : Einstein Wireless MMS
Gateway : 192.168.254.251
Port # : 9201
Server Address : httP//www.einsteinmms.com\+1(your 10 digit # here)
Connect via : EinsteinPCS Internet
-------------------------------------------------------------------
Thank you in advance for even considering it

Categories

Resources