I am having problems setting my internet settings on my Fuze... Everything worked in my Tilt... Could someone make a carrier cab for my carrier? Thank you in advance, and here are the settings that I have..
-----------------------------------------------------
Name for connection : EinsteinPCS Internet
access point name : apn (case sensitive)
Usename : (leave blank)
password: (leave blank)
domain : (leave blank)
...under advanced
User Servier assigned IP address
click ok..
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :192.168.254.251
click advanced
http: 192.168.254.251:8080
wap: 192.168.254.251:9201
secure wap: 192.168.254.251:9201
socks (blank)
-------------------------------------------------------------------
For MMS... go into MMS Options... goto servers.. set these settings :
Server Name : Einstein Wireless MMS
Gateway : 192.168.254.251
Port # : 9201
Server Address : httP//www.einsteinmms.com\+1(your 10 digit # here)
Connect via : EinsteinPCS Internet
-------------------------------------------------------------------
Thank you in advance for even considering it
Related
So, when I upgraded to WM5 I lost MediaNet.
This would have been in Start >> Settings >> Connection Tab >> Conection Icon. Then one of the Drop Downs along with My Work Network and My ISP.
I have no clue how to setup - of cource.
Edit: I think this is it below but I can not connect....
Code:
Tap on Advance tab > Select Networks
Select the drop down to My ISP and click on Edit... > New…
Enter a name for these settings : My GPRS
Select a modem: Cellular Line (GPRS)
Tap on Next
Access point name: wap.cingular or isp.cingular depending upon the plan you are entitled to use. (if not sure of the plan, try wap.cingular)
Username: [email][email protected][/email] or [email][email protected][/email] (depending upon the plan you have as above)
Password: CINGULAR1 (password is case sensitive)
Tap on FINISH > OK > OK > OK >X
here is a link to them all..
if you need help PM me..
http://www.mobilegadgetnews.com/index.php?showtopic=6790
That's the ticket! Thank You VERY MUCH
Code:
WAP Settings for GPRS Profile
Create new GPRS connection.
Description: Cingular WAP
Connects to: The Internet
Access point: WAP.CINGULAR
User name: [email][email protected][/email]
Password: ZJULDAGEN98810
well I think you can use the data acceleration version too.. not sure if you need the pda plan or not though.. glad you got it working..
Accerleration? I messed that on that page... I'll give it a try.
Thanks for you help.
Code:
[U]Data Connect Settings for GPRS Profile[/U]
Create new GPRS connection.
Description: Cingular GPRS
Connects to: The Internet
Access point: ISP.CINGULAR
User name: [email][email protected][/email]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
User name: [email][email protected][/email]
Password: ZXY203DC9K0402
Yep, the above does work and it is much faster! Thanks for pointing that out!
I am having problems setting up the US T-Mobile data settings. I have done search after search and come up with three .cab's that say they contain the settings:
1. T-Mobile_Network_Customizations - does not install
2. t-mobile_network_customizations_335 - does not install
3. T-MobileUStPPC - installs, but does not seem to make any changes after resetting
I even found a few threads that talk about using T-Zones for all of your connections to reduce your monthly bill.
The problem that I am having is that everything that is referenced in the phone settings does not match what I see.
When I goto:
Start / Settings / Connections ... Connections tab
I see:
My ISP
Add a new modem connection
My Work Network
Add a new modem connection
Add a new VPN server connection
Set up my proxy server
What am I missing?
Thanks for the help / flames in advance.
go over to howardforums. they have a thread all about this. You'll findit by searching.
http://www.howardforums.com/forumdisplay.php?f=324
even though I'm bored to tears here at work, I'll let you find it. Teach a man to fish sort of thing...
I use this wap setting with proxy to see real web pages
Code:
T-Mobile web/t-zones proxy
modem: cellular line gprs
Access Point Name: wap.voicestream.com
user name:
password:
domain:*
proxy settings:
proxy server: getmorespeed.voicestream.com
advanced
http: getmorespeed.voicestream.com port: 8080
WAP: wap.voicestream.com port: 9201
Secure WAP proxy: wap.voicestream.com port: 9203
Code:
To get MMS working go to Start>Messaging
Select any account then select Menu>tools>Options>Account Setup
Edit the one called Media Messages the select Menu>Edit Connections
Delete any connections you have and create this one:
CODE
Description: T-Mobile MMS
MMSC address: [url]http://216.155.174.84/servlets/mms[/url]
Data connection: MMS Network
Gateway: WAP 1.0 Gateway
IP address: 216.155.165.50
Port: 9201
GPRS Settings
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
prestonmcafee said:
This worked for me using Molski's 3.2
Goto Start > Settings > Connections > Connections > Add new ISP...
Give it a name (T-Mobile)
Select Cellular Line (GPRS)
Next
APN = internet2.voicestream.com (whichever you like)
Next
Next
Finish
Be sure to leave username, password, domain, etc... all blank
Click to expand...
Click to collapse
This is strange I never had to use the internet2 apn. I just use the wap.voicestream.com and it works fine. Is anyone that is using both noticing any type of difference in connection?
@Peraltah
You can use either APN.
I always leave everything blank and The Edge/GPRS works all the time.
how do i ovecloked
dwny said:
Using just this will work sometimes.
You need to also add wap.voicestream.com and an auto picker will install and based on what you're doing, the proper data connection will be used.
Click to expand...
Click to collapse
i too use mda.can someone tell me how to overclocked
start>settings>connections>connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9203
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
works for. i have been having a problem with getting my internet to work on this thing since day one, which was 1wk ago. If they work for you let me know.
make sure wifi is off
Peace
Hi Guys..
I have a small request for someone! I am fed up with playing with the settings every damn time I have to install a new rom or test something! Any chance someone can make a cab file for me with the GPRS and MMS settings?
1.
Connection name: GO 3G
Select a mode: Cellular Line GPRS , 3G
Access point name : gosurfingun
Leave user name, password and domain blank
MMS over GPRS settings
Connection name: GO MMS
Select a mode: Cellular Line GPRS , 3G
Access point name : gosurfingun
User name: mmsuser
Password : mms
Leave domain blank
MMS Server:
Server Name : go mobile
Gateway : 010.020.020.129
Port number : 9201
Server address : http://mmsc
Sending size limitation : 1200K
wap v2
Any help much appreciated!
Hi there,
Hope someone can help here, please bear with me as i am new to Android and i am a bit of a technophobe
The issue i am having is i just bought a nexus one and cannot connect it to the internet. I have tried to manipulate the APN settings but still do not have any joy.
My mobile network provider is Ben.nl i have got the following setting off there site to connect to the internet however i think i may be missing something
Internet Settings
Profile name: Ben web
Homepage (URL, home):
Access point name: internet.be
Network type: IPv4
Proxy server address: None
Device IP address: Automatic
Name servers: Automatic
Security (security option): Non-secure
Device IP address: Automatic
Authentication: Normal
Username: none (ie blank)
Require password: no
Password: blank (enter nothing)
Wap settings
Profile name: Ben wap
Homepage (URL, home): wap.google.co
Access point name: wap.ben
Network type: IPv4
Proxy server address: 010,010,010,010
Device IP address: Automatic
Name servers: Automatic
Security (security option): Non-secure
Device IP address: Automatic
Authentication: Normal
Port: 8080
Username: none (ie blank)
Require password: no
Password: blank (enter nothing)
I have put the following info into my phone
APN Name Ben Web
APN Internet.be
Proxy not set
Port not set
Username not set
Password not set
Server not set
MMSC tmobilemms
MMS Proxy 010.010.010.011
MMS Port 8080
MCC 204
MNC 16
Auth Type not set
APN Type Default,Supl
Sorry for the long winded scroll hope someone can point me in the right direction as it is driving me mad not being able to do use it on the web.
Thanks in Advance
Stuart
Hi & welcome to XDA. Check over in the Nexus forum where someone with your carrier should be able to assist you.
http://forum.xda-developers.com/forumdisplay.php?f=556