start>settings>connections>connections
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :216.155.165.50
click advanced
http: 216.155.165.50:8080
wap: 216.155.165.50:9201
secure wap: 216.155.165.50:9203
socks (blank)
under modem, your access point name should be : wap.voicestream.com
name and password blank.
under advanced check use server assigned ip address
use software compression
use ip header compression.
works for. i have been having a problem with getting my internet to work on this thing since day one, which was 1wk ago. If they work for you let me know.
make sure wifi is off
Peace
Related
Does any of you know the GRPS configuration for the T-mobile MDA USA?
I lost them and i cannot connect to the internet
Please Help
Thanks
Settings I use . . .
T-Mobile settings
Internet:
Setup a GRPS modem using:
internet3.voicestream.com
or
wap.voicestream.com
I'm using internet 3 because I pay for the VPN service.
My Work Network
T-Mobile WAP
wap.voicestream.com
Proxy settings
Check this network connects to the Internet
Check this network uses proxy server
nothign in proxy server line
click on advanced
WAP 216.155.165.50:8080
MMS Configuration in Mail application
T-Mobile MMS
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connects to My Work Network
jt_armstrong posted the cabs for me in the Wizard forum. Is a little easier than doing it manually..
http://forum.xda-developers.com/viewtopic.php?t=55166
Steven
chow
if you have the t-mobile web plan, your APN is wap.voicestream.com
if you have total internet plan, your APN is internet2.voicestream.com
the t-mobile web is a lot cheaper, you can add the following proxy setting that allow you to get to most of the web, email, and sync with your company exchange.
Proxy setting: getmorespeed.voicestream.com port 8080.
no proxy if you pay for the total internet.
thank you. Worked for me as well.
Re: Settings I use . . .
Hi,
So did you get VPN to work on the phone? If yes, how?
telcontar said:
T-Mobile settings
Internet:
Setup a GRPS modem using:
internet3.voicestream.com
or
wap.voicestream.com
I'm using internet 3 because I pay for the VPN service.
My Work Network
T-Mobile WAP
wap.voicestream.com
Proxy settings
Check this network connects to the Internet
Check this network uses proxy server
nothign in proxy server line
click on advanced
WAP 216.155.165.50:8080
MMS Configuration in Mail application
T-Mobile MMS
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connects to My Work Network
Click to expand...
Click to collapse
I am on my TILT trying to use the isp.cingular connection and it will not load up a webpage. But if I open up my mail and send/recieve it will connect and update properly, any ideas?
Disable the Cingular Proxy in your Programs menu.
isp not working?
There are a few things to look at. APN isp.cingular may be "turned off" for you to access it if you are not on the right data plan. Another thing, The connection profile "My ISP" is not set up completely out of the box. But I assume it is if your using it and your email is working. Another is, you need to disable the proxy with the Proxy Manager cabs before PIE will work with isp.cingular
its probably because you dont have the settings correct go to Settings>connections>Advanced>Select Networks> Set both of those to My ISP
Now go to Connections>My ISP>Manage Connections>My ISP(edit)
Access Point Name: wap.cingular
User Name: WAP.CINGULARGPRS.COM
Password: cingular1
Advanced:
Servers:
DNS: 208.67.222.222
Alt DNS: 208.67.220.220
that will work perfect
well actually I didn't change anything, after a soft reset it just started working
my Tilt with Kaiser ROM has "User Name: [email protected]"
rather than "WAP.CINGULARGPRS.COM"
(@ instead of .)
which is correct ? seems to be working as is, but surely both aren't right ?
DLD
Actually both are right
I have Hyperdragon IV IOLite on my at&t tilt with radio 1.65.21.18. I am having troubling getting a solid internet connection though. My current settings:
Name: Media Net
Modem: Cellular Line (GPRS, 3G)
Access point: wap.cingular
Username/password/domain - blank
Advanced: user server assigned IP, use IP header compression, use specific server addresses - 4.2.2.1, 4.2.2.2
When I turn on my data connection it looks like it makes a successfully connection, but when I load up PIE and try to get to google it just sits on 'Locating...' and eventually times out with "The page cannot be found. Check the name and try again."
Did I miss a setting somewhere? I don't think I've got a proxy set anywhere. Skyfire also fails to load and minimo isn't working either.
ETA: I can make/receive calls, and send/recieve SMS and MMS messages. Just the internets are failing me!
look for the att settings cab file and run that. This will insure that you have all the right settings, also you might want to uncheck the proxy, where ever that is.
Lordy, I finally found that old AT&T internet settings thread. Someone should really add this info to the AT&T Wiki:
Connects to: The Internet
Access point: wap.cingular
Username: [email protected]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
I am having problems setting my internet settings on my Fuze... Everything worked in my Tilt... Could someone make a carrier cab for my carrier? Thank you in advance, and here are the settings that I have..
-----------------------------------------------------
Name for connection : EinsteinPCS Internet
access point name : apn (case sensitive)
Usename : (leave blank)
password: (leave blank)
domain : (leave blank)
...under advanced
User Servier assigned IP address
click ok..
under proxy settings check: this network connects to the internet
check this network uses a proxy server to connect to the internet
proxy server should be :192.168.254.251
click advanced
http: 192.168.254.251:8080
wap: 192.168.254.251:9201
secure wap: 192.168.254.251:9201
socks (blank)
-------------------------------------------------------------------
For MMS... go into MMS Options... goto servers.. set these settings :
Server Name : Einstein Wireless MMS
Gateway : 192.168.254.251
Port # : 9201
Server Address : httP//www.einsteinmms.com\+1(your 10 digit # here)
Connect via : EinsteinPCS Internet
-------------------------------------------------------------------
Thank you in advance for even considering it
i have to enable the following in order to use gprs on my phone. however i cannot do it. please help me out
APN - rcomwap
Use proxy Yes...
Proxy server 10.239.221.5
Proxy Port 8080
Homepage - wap.rworld.co.in
i am unable to set the proxy port
please help me
start-settings-connections-add a new modem connection-
enter a name thene select CELLULAR LINE(GPRS)-next enter accesspoint name
next and finish
for setup a proxy server in settings tap setup my proxy server
good luck