I have Hyperdragon IV IOLite on my at&t tilt with radio 1.65.21.18. I am having troubling getting a solid internet connection though. My current settings:
Name: Media Net
Modem: Cellular Line (GPRS, 3G)
Access point: wap.cingular
Username/password/domain - blank
Advanced: user server assigned IP, use IP header compression, use specific server addresses - 4.2.2.1, 4.2.2.2
When I turn on my data connection it looks like it makes a successfully connection, but when I load up PIE and try to get to google it just sits on 'Locating...' and eventually times out with "The page cannot be found. Check the name and try again."
Did I miss a setting somewhere? I don't think I've got a proxy set anywhere. Skyfire also fails to load and minimo isn't working either.
ETA: I can make/receive calls, and send/recieve SMS and MMS messages. Just the internets are failing me!
look for the att settings cab file and run that. This will insure that you have all the right settings, also you might want to uncheck the proxy, where ever that is.
Lordy, I finally found that old AT&T internet settings thread. Someone should really add this info to the AT&T Wiki:
Connects to: The Internet
Access point: wap.cingular
Username: [email protected]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
Related
So, when I upgraded to WM5 I lost MediaNet.
This would have been in Start >> Settings >> Connection Tab >> Conection Icon. Then one of the Drop Downs along with My Work Network and My ISP.
I have no clue how to setup - of cource.
Edit: I think this is it below but I can not connect....
Code:
Tap on Advance tab > Select Networks
Select the drop down to My ISP and click on Edit... > New…
Enter a name for these settings : My GPRS
Select a modem: Cellular Line (GPRS)
Tap on Next
Access point name: wap.cingular or isp.cingular depending upon the plan you are entitled to use. (if not sure of the plan, try wap.cingular)
Username: [email][email protected][/email] or [email][email protected][/email] (depending upon the plan you have as above)
Password: CINGULAR1 (password is case sensitive)
Tap on FINISH > OK > OK > OK >X
here is a link to them all..
if you need help PM me..
http://www.mobilegadgetnews.com/index.php?showtopic=6790
That's the ticket! Thank You VERY MUCH
Code:
WAP Settings for GPRS Profile
Create new GPRS connection.
Description: Cingular WAP
Connects to: The Internet
Access point: WAP.CINGULAR
User name: [email][email protected][/email]
Password: ZJULDAGEN98810
well I think you can use the data acceleration version too.. not sure if you need the pda plan or not though.. glad you got it working..
Accerleration? I messed that on that page... I'll give it a try.
Thanks for you help.
Code:
[U]Data Connect Settings for GPRS Profile[/U]
Create new GPRS connection.
Description: Cingular GPRS
Connects to: The Internet
Access point: ISP.CINGULAR
User name: [email][email protected][/email]
Password: CINGULAR1
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: (blank)
User name: [email][email protected][/email]
Password: ZXY203DC9K0402
Yep, the above does work and it is much faster! Thanks for pointing that out!
Does any of you know the GRPS configuration for the T-mobile MDA USA?
I lost them and i cannot connect to the internet
Please Help
Thanks
Settings I use . . .
T-Mobile settings
Internet:
Setup a GRPS modem using:
internet3.voicestream.com
or
wap.voicestream.com
I'm using internet 3 because I pay for the VPN service.
My Work Network
T-Mobile WAP
wap.voicestream.com
Proxy settings
Check this network connects to the Internet
Check this network uses proxy server
nothign in proxy server line
click on advanced
WAP 216.155.165.50:8080
MMS Configuration in Mail application
T-Mobile MMS
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connects to My Work Network
jt_armstrong posted the cabs for me in the Wizard forum. Is a little easier than doing it manually..
http://forum.xda-developers.com/viewtopic.php?t=55166
Steven
chow
if you have the t-mobile web plan, your APN is wap.voicestream.com
if you have total internet plan, your APN is internet2.voicestream.com
the t-mobile web is a lot cheaper, you can add the following proxy setting that allow you to get to most of the web, email, and sync with your company exchange.
Proxy setting: getmorespeed.voicestream.com port 8080.
no proxy if you pay for the total internet.
thank you. Worked for me as well.
Re: Settings I use . . .
Hi,
So did you get VPN to work on the phone? If yes, how?
telcontar said:
T-Mobile settings
Internet:
Setup a GRPS modem using:
internet3.voicestream.com
or
wap.voicestream.com
I'm using internet 3 because I pay for the VPN service.
My Work Network
T-Mobile WAP
wap.voicestream.com
Proxy settings
Check this network connects to the Internet
Check this network uses proxy server
nothign in proxy server line
click on advanced
WAP 216.155.165.50:8080
MMS Configuration in Mail application
T-Mobile MMS
Gateway: 216.155.165.50
Port: 8080
Server address: http://216.155.174.84/servlets/mms
Connects to My Work Network
Click to expand...
Click to collapse
I am on my TILT trying to use the isp.cingular connection and it will not load up a webpage. But if I open up my mail and send/recieve it will connect and update properly, any ideas?
Disable the Cingular Proxy in your Programs menu.
isp not working?
There are a few things to look at. APN isp.cingular may be "turned off" for you to access it if you are not on the right data plan. Another thing, The connection profile "My ISP" is not set up completely out of the box. But I assume it is if your using it and your email is working. Another is, you need to disable the proxy with the Proxy Manager cabs before PIE will work with isp.cingular
its probably because you dont have the settings correct go to Settings>connections>Advanced>Select Networks> Set both of those to My ISP
Now go to Connections>My ISP>Manage Connections>My ISP(edit)
Access Point Name: wap.cingular
User Name: WAP.CINGULARGPRS.COM
Password: cingular1
Advanced:
Servers:
DNS: 208.67.222.222
Alt DNS: 208.67.220.220
that will work perfect
well actually I didn't change anything, after a soft reset it just started working
my Tilt with Kaiser ROM has "User Name: [email protected]"
rather than "WAP.CINGULARGPRS.COM"
(@ instead of .)
which is correct ? seems to be working as is, but surely both aren't right ?
DLD
Actually both are right
I spent a long time with CYTA's customer service trying to get the correct mms settings. So, to save other Kaiser and P3600 owners in Cyprus from all the trouble, here they are:
MMS options
Servers
server name: cytamobile
gateway: 212.31.96.161
port number: 9201
server address: http://mmsc.cyta.com.cy
connect via my isp
settings
connections
connections
my isp
new isp
name: mms gprs
modem: cellular line (GPRS, 3G)
access point name: cytamobile
usename: user
password: pass
advanced
server
use specific server address: 195.14.130.186
I know I personally won't be using this, but I'll still thank you for providing this information to anyone who might need it!
Thank you Jackster if my MMS dont work i'll try it as you said here.
You from Cyprus?
ga41 said:
Thank you Jackster if my MMS dont work i'll try it as you said here.
You from Cyprus?
Click to expand...
Click to collapse
also need to activate the mms option either by calling customer services, or by sending an sms to 8000 number writing 'on mms', or by logging on to cytamobile-vodafone.
yeap from cy
Are MMS sent through media net? I cannot send or recieve pics on my tilt. I called tech support and they told to get a new tilt. I rather not since most of my software is all custom set up. I think it may have to do with media net becasue i deleted it so i won;t get charged connecting. I use wifi. So can anyone tell me how to fix this or how medianet is set up under connections options so i can add it agian?
SMS are sent over GSM.
Go to 'MMS Options'
Server name: "Name of your choosing"
Gateway: wireless.cingular.com
Port Number: 80
Server Address: http://mmsc.cingular.com