Get back to function after entering Bootlaoder mode - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Please help!!! Desperate!!! Please help
I have accidently put my XDA2i into bootloader mode, how can i get back to function.
Posting edited by LumpiStefan.....
Maybe you should check your Shift-Key on you PC. Looks like it´s malfunctioning....
Click to expand...
Click to collapse

Doesn't hard reset help ? (power + reset).
If not, just flash the ROM
I'm not sure if there's a possibilty to leave bootloader without erasing data.
Read the wiki about Blueangel... there's everything.

Related

Can't hard reset

I can't hard reset. All I have is a vodafone screen when I switch it on. Can I recover from this or is it a brick now.
Any advice.
thanks
Elaine
what exactly did u do
Did u try to flash your ROM ?
The set will not get bricked all of a sudden.
Remove the battery for a while and check it again
elainehm said:
I can't hard reset. All I have is a vodafone screen when I switch it on. Can I recover from this or is it a brick now.
Any advice.
thanks
Elaine
Click to expand...
Click to collapse
Put your device on bootloader and flash your device again (hardspl first, if you have not flash before) . Read the wiki to find your stock rom and how to flash if it is your first time.
thanks
I had not tried to do anything with my phone it just hung up after doing a soft reset because it had frozen up and the soft reset then froze also and then there was nothing.
I followed the advice suggested and my phone is now working.
thanks again
Elaine

I think i have big problem with my n1

Hello,
I have big problem with my rooted nexus one !!
Detail :
the phone hang in boot ( x rainbow ) and i can't open recovery mod !
What i can do ??
Thank you
* : Sorry for my bad English lang
Wrong forum, this oughta go in Q&A.
Anyhow: when did the problem start? Were you flashing a radio, or did you just decide to reboot your phone?
Max-via said:
Hello,
I have big problem with my rooted nexus one !!
Detail :
the phone hang in boot ( x rainbow ) and i can't open recovery mod !
What i can do ??
Thank you
* : Sorry for my bad English lang
Click to expand...
Click to collapse
reflash recovery using fastboot
i think you have another big problem, you are not able to read the stikies so you posted in the wrong section.
I think you need to explain what you've tried to do.
Then some of the clever people on this site, may be able to work out what has happened, more info needed!
Luckily its not really a big problem. You should be able to remove battery, and go to recovery by holding power and volume down, then recovery... if not you will have to re flash recovery like www said.
tjsimmons said:
Wrong forum, this oughta go in Q&A.
Anyhow: when did the problem start? Were you flashing a radio, or did you just decide to reboot your phone?
Click to expand...
Click to collapse
The problem start after root the device directly, i did not flash the radio
Thank you for reply
www1 said:
reflash recovery using fastboot
Click to expand...
Click to collapse
i'll try
Thank you for reply
paratox said:
i think you have another big problem, you are not able to read the stikies so you posted in the wrong section.
Click to expand...
Click to collapse
Then I'll write in the correct section
Thank you for reply
Amdathlonuk said:
I think you need to explain what you've tried to do.
Then some of the clever people on this site, may be able to work out what has happened, more info needed!
Click to expand...
Click to collapse
Okay,
when i received the device i rooted after that i take the memory card to my old nokia becouse i need the contacts when insert the memory i turn on and his hang !!
Thank you for reply
rjhay22 said:
Luckily its not really a big problem. You should be able to remove battery, and go to recovery by holding power and volume down, then recovery... if not you will have to re flash recovery like www said.
Click to expand...
Click to collapse
I'll try, i hope it's not big problem
Thank you for reassuring and reply
after i reflash the recovery his hang too!
i think the system is dead how i can to keep renewing it for life ??
where are you guys !
Try this
Wipe EVERYTHING in recovery (including ext partition if you have one). Wipe the dalvik cache, everything. Then try reflashing. If it doesn't work try a different rom. If that doesn't work make sure it's plugged in and has a good charge and flash a new radio and then a new image. If not, contact HTC.
Straight from Seraph1024's stickied post:
Q: How do I know the phone is bricked?
A: You can not brick a phone unless you are flashing Radio/SPL packages. Make sure if you are doing that, you follow directions VERY CAREFULLY. A bricked phone can not boot into bootloader, recovery, or into normal operation modes. You can not connect to a bricked phone via adb or fastboot. You can only see one screen on the phone and it will be the first splash screen.
Sorry to hear.
brashmadcap said:
Wipe EVERYTHING in recovery (including ext partition if you have one). Wipe the dalvik cache, everything. Then try reflashing. If it doesn't work try a different rom. If that doesn't work make sure it's plugged in and has a good charge and flash a new radio and then a new image. If not, contact HTC.
Click to expand...
Click to collapse
I can't open recovery mod but i can enter the bootloader and fastboot
i try to reflash the recovery from fastboot mod but his still not working
cue_32 said:
Straight from Seraph1024's stickied post:
Q: How do I know the phone is bricked?
A: You can not brick a phone unless you are flashing Radio/SPL packages. Make sure if you are doing that, you follow directions VERY CAREFULLY. A bricked phone can not boot into bootloader, recovery, or into normal operation modes. You can not connect to a bricked phone via adb or fastboot. You can only see one screen on the phone and it will be the first splash screen.
Sorry to hear.
Click to expand...
Click to collapse
But i can see the bootloader and fastboot or "Hboot" !!
Is there any one that wants to help me ??
Pm me what's up and what you've done so far to try and fix it. ill try to help you.
I try Everything i want to format Everything in phone and do it again like a new device, but how ??
plz reply !!

[Q] Help me,please

I updated my galaxy with KIES,and after restarting my phone go to logo SAMSUNG and vibrate every minut.And then is dark screen.
I can`t go into recovery or download mode.
What can i do?
First of all you could have it posted in QnA
Second, use search.
And third -> Go to recovery mode (vol+ + home + power)
do hard reset and wipe cache.
Report if it helps
Of course you will lose ur settings, accounts...
Maybe try first wipe-cache only.
I think you didn`t read my post carefully, I wrote that I can not get into recovery mode.
srecko76 said:
I think you didn`t read my post carefully, I wrote that I can not get into recovery mode.
Click to expand...
Click to collapse
why not just simply pull your battery, and enter recover mode again?
srecko76 said:
I think you didn`t read my post carefully, I wrote that I can not get into recovery mode.
Click to expand...
Click to collapse
3-Button-Combo Bug? Why you haven't fixed it before flashing another firmware?
You've bricked your Phone.
U have usb debugging on? If yes try 'adb reboot recovery'
If no download mode, no recovery... Samsung only can help.
Hey guys,
I posted in a thread in Q&A.
hatdrawn said:
I just want to be clear ...
So I last night I flashed JPK, PDA/MODEM/CSC with 512pit installed latest oneclick lag fix 2.1.1, SGS tools and other basic apps. Was running perfect all night except that RAM seemed to be eaten up easily.
Then this morning Advanced Task Killer Froyo Beta started acting up. So I tried a reboot and then I got this black screen issue.
Tried reflashing JPK again. Just successfully flashed JH2 but still the black screen.
Recovery/Download mode work. With 2.2 recovery mode I was getting SDCARD connect errors on screen, but since JH2 I don't see them. Tried wiping cache partition, and factory reset. Still black screen. I've tried without external SD and SIM and just recently with external SD.
In this JH2 recovery mode "update media, finished" and Apllyting MultiCSC works properly too. When in recovery mode, Kies tries to recognize it, but boot/blackscreen I get nothing.
Is there anything else I can try? I have read through this whole thread, but it's a lot to read and understand. Anything with ADB? When in recovery mode ADB shell returns a device not found
Click to expand...
Click to collapse
Just wondering if you could help out please? Not getting an responses there.
hatdrawn said:
Hey guys,
I posted in a thread in Q&A.
Just wondering if you could help out please? Not getting an responses there.
Click to expand...
Click to collapse
- Reflash with Odin
- Do a Factory reset
I've done that with JPK and JH2 to no prevail
xan said:
U have usb debugging on? If yes try 'adb reboot recovery'
If no download mode, no recovery... Samsung only can help.
Click to expand...
Click to collapse
Please tell me,how can i do that.
hatdrawn said:
Hey guys,
I posted in a thread in Q&A.
Just wondering if you could help out please? Not getting an responses there.
Click to expand...
Click to collapse
can you go as past the boot screen?
are you able to issue commands?
I can't get past the boot screen on either FW
there was a topic in the Dev forum with some people that were able to successfully come back to 2.1 after flashing 2.2
but i don't remember the tittle of the topic
they originally had the same problem you have reported
if you can find it, then you'll be able to use the same methods they used to come back to a funtional 2.1
I've looked. I tried going to 2.1 but it's the same issue.
New thin though. I now have a image frozen on screen of a box with an arrow coming out of it and the android standing next to it.
What does that mean?
How you get there?
srecko76 said:
How you get there?
Click to expand...
Click to collapse
You can't get to USB Debugging unless your phone is working.
It's my issue too, but I at least have the 3 button combo.
If you got debugging mode turned on in settings:
On a PC download android sdk, open command window in tools directory...
type "adb reboot recovery"
But I dont think it may help at all, its just to make u step forward
If you dont have debugging mode turned on in settings:
Only samsung.

Phone doesn't boot, can't connect to Computer

Hello,
i have rooted my phone without problems. then i flashed a custom rom (cyanogen mod 10.1) yesterday.
i had many problems and wanted to flash the original stock rom back. but it doesn't work anymore. My phone freezes at boot and there is just this "cyanogen circle" and nothing happens.
i tried hard reset when pushing volume down + power, but nothing works.
When i try to connect my phone with my computer => nothing happens...
i don't know which mode i have to use, when connect with computer. Do i have to push volume down + power first, or just try to turn on the phone (which is actually not working) or something else?
i'm really frustrated
i just want a clear Stock ROM...
please help me :crying:
PS: Sry for my bad english, but i think this is the best forum to post my question
take a look into general section and you'll find this http://forum.xda-developers.com/showthread.php?t=2069723
do it step by step and you'll be fine :good:
minecraftgamer2 said:
Hello,
i have rooted my phone without problems. then i flashed a custom rom (cyanogen mod 10.1) yesterday.
i had many problems and wanted to flash the original stock rom back. but it doesn't work anymore. My phone freezes at boot and there is just this "cyanogen circle" and nothing happens.
i tried hard reset when pushing volume down + power, but nothing works.
When i try to connect my phone with my computer => nothing happens...
i don't know which mode i have to use, when connect with computer. Do i have to push volume down + power first, or just try to turn on the phone (which is actually not working) or something else?
i'm really frustrated
i just want a clear Stock ROM...
please help me :crying:
PS: Sry for my bad english, but i think this is the best forum to post my question
Click to expand...
Click to collapse
May you just forgot to factory reset Happened to me once.
tobixdev said:
May you just forgot to factory reset Happened to me once.
Click to expand...
Click to collapse
he said he did a factory reset, but it's still CM flashed, so full wipe helps nothing....
he's gotta reflash stock first
AW: Phone doesn't boot, can't connect to Computer
ok sorry did overread that
yeah then he has to kdz back
Sent from my LG-P880 using xda app-developers app
Hello,
My P880 hangs on the first LG-Logo,I cant access the device through adb, and flashing kdz doesn't help, I tried with several versions, and several PCs.
Can anyone help me please?
Sry for my bad English.
weissi1994 said:
Hello,
My P880 hangs on the first LG-Logo,I cant access the device through adb, and flashing kdz doesn't help, I tried with several versions, and several PCs.
Can anyone help me please?
Sry for my bad English.
Click to expand...
Click to collapse
Tried LG Flash Tool and flash it with .dz?
Will delete everything in your phone!
weissi1994 said:
Hello,
My P880 hangs on the first LG-Logo,I cant access the device through adb, and flashing kdz doesn't help, I tried with several versions, and several PCs.
Can anyone help me please?
Sry for my bad English.
Click to expand...
Click to collapse
same problem here.. my device is a "not for sale", maybe LG shut down remotely..
gabrielfi said:
same problem here.. my device is a "not for sale", maybe LG shut down remotely..
Click to expand...
Click to collapse
There is a thread how to flash developer phones, just search for it.

Bricked Sony Xperia Z1!! Need help urgently!!!

So I was flashing a custom rom in CWM and it was just about to reboot when it said that it could not find the root files and asked if I wanted to install them. I clicked yes and now its stuck on the Sony sign. I can't turn it off or anything.
I tried using flash tool but it said i had to turn it off and go into flashmode which I have no way of doing.
Please help ASAP
Thannks
This is not a brick, it is just a bootloop. i think, you didn't wiped data / cache ?! just flashed the zip?!
If you flash a rom with cwm, that is another rom then your actual one, then you will have to wipe data / cache.
So first go to CWM and wipe data / factory reset. then try to boot again.
If you need flashmode:
Turn off device (if it is stuck, press and hold Power + VolUp)
Then hold VolDown and connect the usb cable
PS: for the next time, try reading the pinned posts in dev forums before you ask such questions, cause this is BASIC KNOWLEDGE for flashing a device.
DJ_Synergy said:
This is not a brick, it is just a bootloop. i think, you didn't wiped data / cache ?! just flashed the zip?!
If you flash a rom with cwm, that is another rom then your actual one, then you will have to wipe data / cache.
So first go to CWM and wipe data / factory reset. then try to boot again.
If you need flashmode:
Turn off device (if it is stuck, press and hold Power + VolUp)
Then hold VolDown and connect the usb cable
PS: for the next time, try reading the pinned posts in dev forums before you ask such questions, cause this is BASIC KNOWLEDGE for flashing a device.
Click to expand...
Click to collapse
Wow thank you so much
I thought it was a lot worse than it actually is lol
SpawnCube said:
Wow thank you so much
I thought it was a lot worse than it actually is lol
Click to expand...
Click to collapse
so i think it boots up again after wipe?!
DJ_Synergy said:
so i think it boots up again after wipe?!
Click to expand...
Click to collapse
Yep
I just reinstalled the custom rom and everything worked fine
SpawnCube said:
Yep
I just reinstalled the custom rom and everything worked fine
Click to expand...
Click to collapse
hmm you dont need to reinstall ... the important thing is WIPE DATA ... Android leaves files on the data partition that may not be compatible with the new rom and that then is a bootloop or other problems with the new rom. so everytime you flash a new rom, wipe data!

Categories

Resources